include/configs/ge_bx50v3.h - filogic/uboot - Gitiles

 /*
  * Copyright (C) 2015 Timesys Corporation
  * Copyright (C) 2015 General Electric Company
  * Copyright (C) 2014 Advantech
  * Copyright (C) 2012 Freescale Semiconductor, Inc.
  *
  * Configuration settings for the GE MX6Q Bx50v3 boards.
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */

 #ifndef __GE_BX50V3_CONFIG_H
 #define __GE_BX50V3_CONFIG_H

 #include <asm/arch/imx-regs.h>
 #include <asm/mach-imx/gpio.h>

 #define BX50V3_BOOTARGS_EXTRA
 #if defined(CONFIG_TARGET_GE_B450V3)
 #define CONFIG_BOARD_NAME	"General Electric B450v3"
 #elif defined(CONFIG_TARGET_GE_B650V3)
 #define CONFIG_BOARD_NAME	"General Electric B650v3"
 #elif defined(CONFIG_TARGET_GE_B850V3)
 #define CONFIG_BOARD_NAME	"General Electric B850v3"
 #undef BX50V3_BOOTARGS_EXTRA
 #define BX50V3_BOOTARGS_EXTRA	"video=DP-1:1024x768@60 " \
 				"video=HDMI-A-1:1024x768@60 "
 #else
 #define CONFIG_BOARD_NAME	"General Electric BA16 Generic"
 #endif

 #define CONFIG_MXC_UART_BASE	UART3_BASE
 #define CONSOLE_DEV	"ttymxc2"

 #define CONFIG_SUPPORT_EMMC_BOOT


 #include "mx6_common.h"
 #include <linux/sizes.h>

 #define CONFIG_CMDLINE_TAG
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
 #define CONFIG_REVISION_TAG
 #define CONFIG_SYS_MALLOC_LEN		(10 * SZ_1M)

 #define CONFIG_HW_WATCHDOG
 #define CONFIG_IMX_WATCHDOG
 #define CONFIG_WATCHDOG_TIMEOUT_MSECS 6000

 #define CONFIG_LAST_STAGE_INIT

 #define CONFIG_MXC_GPIO
 #define CONFIG_MXC_UART

 #define CONFIG_MXC_OCOTP

 /* SATA Configs */
 #ifdef CONFIG_CMD_SATA
 #define CONFIG_SYS_SATA_MAX_DEVICE	1
 #define CONFIG_DWC_AHSATA_PORT_ID	0
 #define CONFIG_DWC_AHSATA_BASE_ADDR	SATA_ARB_BASE_ADDR
 #define CONFIG_LBA48
 #endif

 /* MMC Configs */
 #define CONFIG_FSL_ESDHC
 #define CONFIG_FSL_USDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
 #define CONFIG_BOUNCE_BUFFER

 /* USB Configs */
 #ifdef CONFIG_USB
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS	0

 #define CONFIG_USBD_HS
 #define CONFIG_USB_GADGET_MASS_STORAGE
 #endif

 /* Networking Configs */
 #ifdef CONFIG_NET
 #define CONFIG_FEC_MXC
 #define CONFIG_MII
 #define IMX_FEC_BASE			ENET_BASE_ADDR
 #define CONFIG_FEC_XCV_TYPE		RGMII
 #define CONFIG_ETHPRIME		"FEC"
 #define CONFIG_FEC_MXC_PHYADDR		4
 #define CONFIG_PHY_ATHEROS
 #endif

 /* Serial Flash */
 #ifdef CONFIG_CMD_SF
 #define CONFIG_MXC_SPI
 #define CONFIG_SF_DEFAULT_BUS		0
 #define CONFIG_SF_DEFAULT_CS		0
 #define CONFIG_SF_DEFAULT_SPEED	20000000
 #define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
 #endif

 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_CONS_INDEX	1

 #define CONFIG_LOADADDR	0x12000000
 #define CONFIG_SYS_TEXT_BASE	0x17800000

 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"bootcause=POR\0" \
 	"bootlimit=10\0" \
 	"image=/boot/fitImage\0" \
 	"fdt_high=0xffffffff\0" \
 	"dev=mmc\0" \
 	"devnum=1\0" \
 	"rootdev=mmcblk0p\0" \
 	"quiet=quiet loglevel=0\0" \
 	"console=" CONSOLE_DEV "\0" \
 	"setargs=setenv bootargs root=/dev/${rootdev}${partnum} " \
 		"ro rootwait cma=128M " \
 		"bootcause=${bootcause} " \
 		"${quiet} console=${console} ${rtc_status} " \
 		BX50V3_BOOTARGS_EXTRA "\0" \
 	"doquiet=" \
 		"if ext2load ${dev} ${devnum}:5 0x7000A000 /boot/console; " \
 			"then setenv quiet; fi\0" \
 	"hasfirstboot=" \
 		"ext2load ${dev} ${devnum}:${partnum} 0x7000A000 " \
 		"/boot/bootcause/firstboot\0" \
 	"swappartitions=" \
 		"setexpr partnum 3 - ${partnum}\0" \
 	"failbootcmd=" \
 		"msg=\"Monitor failed to start.  Try again, or contact GE Service for support.\"; " \
 		"echo $msg; " \
 		"setenv stdout vga; " \
 		"echo \"\n\n\n\n    \" $msg; " \
 		"setenv stdout serial; " \
 		"mw.b 0x7000A000 0xbc; " \
 		"mw.b 0x7000A001 0x00; " \
 		"ext4write ${dev} ${devnum}:5 0x7000A000 /boot/failures 2\0" \
 	"altbootcmd=" \
 		"run doquiet; " \
 		"setenv partnum 1; run hasfirstboot || setenv partnum 2; " \
 		"run hasfirstboot || setenv partnum 0; " \
 		"if test ${partnum} != 0; then " \
 			"setenv bootcause REVERT; " \
 			"run swappartitions loadimage doboot; " \
 		"fi; " \
 		"run failbootcmd\0" \
 	"loadimage=" \
 		"ext2load ${dev} ${devnum}:${partnum} ${loadaddr} ${image}\0" \
 	"doboot=" \
 		"echo Booting from ${dev}:${devnum}:${partnum} ...; " \
 		"run setargs; " \
 		"bootm ${loadaddr}#conf@${confidx}\0" \
 	"tryboot=" \
 		"setenv partnum 1; run hasfirstboot || setenv partnum 2; " \
 		"run loadimage || run swappartitions && run loadimage || " \
 		"setenv partnum 0 && echo MISSING IMAGE;" \
 		"run doboot; " \
 		"run failbootcmd\0" \

 #define CONFIG_MMCBOOTCOMMAND \
 	"if mmc dev ${devnum}; then " \
 		"run doquiet; " \
 		"run tryboot; " \
 	"fi; " \

 #define CONFIG_USBBOOTCOMMAND \
 	"echo Unsupported; " \

 #ifdef CONFIG_CMD_USB
 #define CONFIG_BOOTCOMMAND CONFIG_USBBOOTCOMMAND
 #else
 #define CONFIG_BOOTCOMMAND CONFIG_MMCBOOTCOMMAND
 #endif

 #define CONFIG_ARP_TIMEOUT     200UL

 /* Miscellaneous configurable options */
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_AUTO_COMPLETE

 #define CONFIG_SYS_MEMTEST_START       0x10000000
 #define CONFIG_SYS_MEMTEST_END         0x10010000
 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000

 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR

 #define CONFIG_CMDLINE_EDITING

 /* Physical Memory Map */
 #define CONFIG_NR_DRAM_BANKS           1
 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR

 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE

 #define CONFIG_SYS_INIT_SP_OFFSET \
 	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_ADDR \
 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

 /* environment organization */
 #define CONFIG_ENV_SIZE		(8 * 1024)
 #define CONFIG_ENV_OFFSET		(768 * 1024)
 #define CONFIG_ENV_SECT_SIZE		(64 * 1024)
 #define CONFIG_ENV_SPI_BUS		CONFIG_SF_DEFAULT_BUS
 #define CONFIG_ENV_SPI_CS		CONFIG_SF_DEFAULT_CS
 #define CONFIG_ENV_SPI_MODE		CONFIG_SF_DEFAULT_MODE
 #define CONFIG_ENV_SPI_MAX_HZ		CONFIG_SF_DEFAULT_SPEED

 #ifndef CONFIG_SYS_DCACHE_OFF
 #endif

 #define CONFIG_SYS_FSL_USDHC_NUM	3

 /* Framebuffer */
 #define CONFIG_VIDEO
 #ifdef CONFIG_VIDEO
 #define CONFIG_VIDEO_IPUV3
 #define CONFIG_CFB_CONSOLE
 #define CONFIG_VGA_AS_SINGLE_DEVICE
 #define CONFIG_SYS_CONSOLE_FG_COL 0xFF
 #define CONFIG_SYS_CONSOLE_BG_COL 0x00
 #define CONFIG_HIDE_LOGO_VERSION
 #define CONFIG_IMX_HDMI
 #define CONFIG_IMX_VIDEO_SKIP
 #define CONFIG_CMD_BMP
 #endif

 #define CONFIG_PWM_IMX
 #define CONFIG_IMX6_PWM_PER_CLK	66000000

 #define CONFIG_PCI
 #define CONFIG_PCI_PNP
 #define CONFIG_PCI_SCAN_SHOW
 #define CONFIG_PCIE_IMX
 #define CONFIG_PCIE_IMX_PERST_GPIO	IMX_GPIO_NR(7, 12)
 #define CONFIG_PCIE_IMX_POWER_GPIO	IMX_GPIO_NR(1, 5)

 #define CONFIG_RTC_RX8010SJ
 #define CONFIG_SYS_RTC_BUS_NUM 2
 #define CONFIG_SYS_I2C_RTC_ADDR	0x32

 /* I2C Configs */
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
 #define CONFIG_SYS_I2C_SPEED		  100000
 #define CONFIG_SYS_I2C_MXC_I2C1
 #define CONFIG_SYS_I2C_MXC_I2C2
 #define CONFIG_SYS_I2C_MXC_I2C3

 #define CONFIG_SYS_NUM_I2C_BUSES        11
 #define CONFIG_SYS_I2C_MAX_HOPS         1
 #define CONFIG_SYS_I2C_BUSES	{	{0, {I2C_NULL_HOP} }, \
 					{1, {I2C_NULL_HOP} }, \
 					{2, {I2C_NULL_HOP} }, \
 					{0, {{I2C_MUX_PCA9547, 0x70, 0} } }, \
 					{0, {{I2C_MUX_PCA9547, 0x70, 1} } }, \
 					{0, {{I2C_MUX_PCA9547, 0x70, 2} } }, \
 					{0, {{I2C_MUX_PCA9547, 0x70, 3} } }, \
 					{0, {{I2C_MUX_PCA9547, 0x70, 4} } }, \
 					{0, {{I2C_MUX_PCA9547, 0x70, 5} } }, \
 					{0, {{I2C_MUX_PCA9547, 0x70, 6} } }, \
 					{0, {{I2C_MUX_PCA9547, 0x70, 7} } }, \
 				}

 #define CONFIG_BCH

 #define CONFIG_BOOTCOUNT_LIMIT
 #define CONFIG_BOOTCOUNT_EXT
 #define CONFIG_SYS_BOOTCOUNT_EXT_INTERFACE	"mmc"
 #define CONFIG_SYS_BOOTCOUNT_EXT_DEVPART	"1:5"
 #define CONFIG_SYS_BOOTCOUNT_EXT_NAME		"/boot/failures"
 #define CONFIG_SYS_BOOTCOUNT_ADDR		0x7000A000

 #endif	/* __GE_BX50V3_CONFIG_H */
	/*
	* Copyright (C) 2015 Timesys Corporation
	* Copyright (C) 2015 General Electric Company
	* Copyright (C) 2014 Advantech
	* Copyright (C) 2012 Freescale Semiconductor, Inc.
	*
	* Configuration settings for the GE MX6Q Bx50v3 boards.
	*
	* SPDX-License-Identifier: GPL-2.0+
	*/

	#ifndef __GE_BX50V3_CONFIG_H
	#define __GE_BX50V3_CONFIG_H

	#include <asm/arch/imx-regs.h>
	#include <asm/mach-imx/gpio.h>

	#define BX50V3_BOOTARGS_EXTRA
	#if defined(CONFIG_TARGET_GE_B450V3)
	#define CONFIG_BOARD_NAME "General Electric B450v3"
	#elif defined(CONFIG_TARGET_GE_B650V3)
	#define CONFIG_BOARD_NAME "General Electric B650v3"
	#elif defined(CONFIG_TARGET_GE_B850V3)
	#define CONFIG_BOARD_NAME "General Electric B850v3"
	#undef BX50V3_BOOTARGS_EXTRA
	#define BX50V3_BOOTARGS_EXTRA "video=DP-1:1024x768@60 " \
	"video=HDMI-A-1:1024x768@60 "
	#else
	#define CONFIG_BOARD_NAME "General Electric BA16 Generic"
	#endif

	#define CONFIG_MXC_UART_BASE UART3_BASE
	#define CONSOLE_DEV "ttymxc2"

	#define CONFIG_SUPPORT_EMMC_BOOT


	#include "mx6_common.h"
	#include <linux/sizes.h>

	#define CONFIG_CMDLINE_TAG
	#define CONFIG_SETUP_MEMORY_TAGS
	#define CONFIG_INITRD_TAG
	#define CONFIG_REVISION_TAG
	#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)

	#define CONFIG_HW_WATCHDOG
	#define CONFIG_IMX_WATCHDOG
	#define CONFIG_WATCHDOG_TIMEOUT_MSECS 6000

	#define CONFIG_LAST_STAGE_INIT

	#define CONFIG_MXC_GPIO
	#define CONFIG_MXC_UART

	#define CONFIG_MXC_OCOTP

	/* SATA Configs */
	#ifdef CONFIG_CMD_SATA
	#define CONFIG_SYS_SATA_MAX_DEVICE 1
	#define CONFIG_DWC_AHSATA_PORT_ID 0
	#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
	#define CONFIG_LBA48
	#endif

	/* MMC Configs */
	#define CONFIG_FSL_ESDHC
	#define CONFIG_FSL_USDHC
	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
	#define CONFIG_BOUNCE_BUFFER

	/* USB Configs */
	#ifdef CONFIG_USB
	#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
	#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
	#define CONFIG_MXC_USB_FLAGS 0

	#define CONFIG_USBD_HS
	#define CONFIG_USB_GADGET_MASS_STORAGE
	#endif

	/* Networking Configs */
	#ifdef CONFIG_NET
	#define CONFIG_FEC_MXC
	#define CONFIG_MII
	#define IMX_FEC_BASE ENET_BASE_ADDR
	#define CONFIG_FEC_XCV_TYPE RGMII
	#define CONFIG_ETHPRIME "FEC"
	#define CONFIG_FEC_MXC_PHYADDR 4
	#define CONFIG_PHY_ATHEROS
	#endif

	/* Serial Flash */
	#ifdef CONFIG_CMD_SF
	#define CONFIG_MXC_SPI
	#define CONFIG_SF_DEFAULT_BUS 0
	#define CONFIG_SF_DEFAULT_CS 0
	#define CONFIG_SF_DEFAULT_SPEED 20000000
	#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
	#endif

	/* allow to overwrite serial and ethaddr */
	#define CONFIG_ENV_OVERWRITE
	#define CONFIG_CONS_INDEX 1

	#define CONFIG_LOADADDR 0x12000000
	#define CONFIG_SYS_TEXT_BASE 0x17800000

	#define CONFIG_EXTRA_ENV_SETTINGS \
	"bootcause=POR\0" \
	"bootlimit=10\0" \
	"image=/boot/fitImage\0" \
	"fdt_high=0xffffffff\0" \
	"dev=mmc\0" \
	"devnum=1\0" \
	"rootdev=mmcblk0p\0" \
	"quiet=quiet loglevel=0\0" \
	"console=" CONSOLE_DEV "\0" \
	"setargs=setenv bootargs root=/dev/${rootdev}${partnum} " \
	"ro rootwait cma=128M " \
	"bootcause=${bootcause} " \
	"${quiet} console=${console} ${rtc_status} " \
	BX50V3_BOOTARGS_EXTRA "\0" \
	"doquiet=" \
	"if ext2load ${dev} ${devnum}:5 0x7000A000 /boot/console; " \
	"then setenv quiet; fi\0" \
	"hasfirstboot=" \
	"ext2load ${dev} ${devnum}:${partnum} 0x7000A000 " \
	"/boot/bootcause/firstboot\0" \
	"swappartitions=" \
	"setexpr partnum 3 - ${partnum}\0" \
	"failbootcmd=" \
	"msg=\"Monitor failed to start. Try again, or contact GE Service for support.\"; " \
	"echo $msg; " \
	"setenv stdout vga; " \
	"echo \"\n\n\n\n \" $msg; " \
	"setenv stdout serial; " \
	"mw.b 0x7000A000 0xbc; " \
	"mw.b 0x7000A001 0x00; " \
	"ext4write ${dev} ${devnum}:5 0x7000A000 /boot/failures 2\0" \
	"altbootcmd=" \
	"run doquiet; " \
	"setenv partnum 1; run hasfirstboot \|\| setenv partnum 2; " \
	"run hasfirstboot \|\| setenv partnum 0; " \
	"if test ${partnum} != 0; then " \
	"setenv bootcause REVERT; " \
	"run swappartitions loadimage doboot; " \
	"fi; " \
	"run failbootcmd\0" \
	"loadimage=" \
	"ext2load ${dev} ${devnum}:${partnum} ${loadaddr} ${image}\0" \
	"doboot=" \
	"echo Booting from ${dev}:${devnum}:${partnum} ...; " \
	"run setargs; " \
	"bootm ${loadaddr}#conf@${confidx}\0" \
	"tryboot=" \
	"setenv partnum 1; run hasfirstboot \|\| setenv partnum 2; " \
	"run loadimage \|\| run swappartitions && run loadimage \|\| " \
	"setenv partnum 0 && echo MISSING IMAGE;" \
	"run doboot; " \
	"run failbootcmd\0" \

	#define CONFIG_MMCBOOTCOMMAND \
	"if mmc dev ${devnum}; then " \
	"run doquiet; " \
	"run tryboot; " \
	"fi; " \

	#define CONFIG_USBBOOTCOMMAND \
	"echo Unsupported; " \

	#ifdef CONFIG_CMD_USB
	#define CONFIG_BOOTCOMMAND CONFIG_USBBOOTCOMMAND
	#else
	#define CONFIG_BOOTCOMMAND CONFIG_MMCBOOTCOMMAND
	#endif

	#define CONFIG_ARP_TIMEOUT 200UL

	/* Miscellaneous configurable options */
	#define CONFIG_SYS_LONGHELP
	#define CONFIG_AUTO_COMPLETE

	#define CONFIG_SYS_MEMTEST_START 0x10000000
	#define CONFIG_SYS_MEMTEST_END 0x10010000
	#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000

	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR

	#define CONFIG_CMDLINE_EDITING

	/* Physical Memory Map */
	#define CONFIG_NR_DRAM_BANKS 1
	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR

	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE

	#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

	/* environment organization */
	#define CONFIG_ENV_SIZE (8 * 1024)
	#define CONFIG_ENV_OFFSET (768 * 1024)
	#define CONFIG_ENV_SECT_SIZE (64 * 1024)
	#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
	#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
	#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
	#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED

	#ifndef CONFIG_SYS_DCACHE_OFF
	#endif

	#define CONFIG_SYS_FSL_USDHC_NUM 3

	/* Framebuffer */
	#define CONFIG_VIDEO
	#ifdef CONFIG_VIDEO
	#define CONFIG_VIDEO_IPUV3
	#define CONFIG_CFB_CONSOLE
	#define CONFIG_VGA_AS_SINGLE_DEVICE
	#define CONFIG_SYS_CONSOLE_FG_COL 0xFF
	#define CONFIG_SYS_CONSOLE_BG_COL 0x00
	#define CONFIG_HIDE_LOGO_VERSION
	#define CONFIG_IMX_HDMI
	#define CONFIG_IMX_VIDEO_SKIP
	#define CONFIG_CMD_BMP
	#endif

	#define CONFIG_PWM_IMX
	#define CONFIG_IMX6_PWM_PER_CLK 66000000

	#define CONFIG_PCI
	#define CONFIG_PCI_PNP
	#define CONFIG_PCI_SCAN_SHOW
	#define CONFIG_PCIE_IMX
	#define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(7, 12)
	#define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(1, 5)

	#define CONFIG_RTC_RX8010SJ
	#define CONFIG_SYS_RTC_BUS_NUM 2
	#define CONFIG_SYS_I2C_RTC_ADDR 0x32

	/* I2C Configs */
	#define CONFIG_SYS_I2C
	#define CONFIG_SYS_I2C_MXC
	#define CONFIG_SYS_I2C_SPEED 100000
	#define CONFIG_SYS_I2C_MXC_I2C1
	#define CONFIG_SYS_I2C_MXC_I2C2
	#define CONFIG_SYS_I2C_MXC_I2C3

	#define CONFIG_SYS_NUM_I2C_BUSES 11
	#define CONFIG_SYS_I2C_MAX_HOPS 1
	#define CONFIG_SYS_I2C_BUSES { {0, {I2C_NULL_HOP} }, \
	{1, {I2C_NULL_HOP} }, \
	{2, {I2C_NULL_HOP} }, \
	{0, {{I2C_MUX_PCA9547, 0x70, 0} } }, \
	{0, {{I2C_MUX_PCA9547, 0x70, 1} } }, \
	{0, {{I2C_MUX_PCA9547, 0x70, 2} } }, \
	{0, {{I2C_MUX_PCA9547, 0x70, 3} } }, \
	{0, {{I2C_MUX_PCA9547, 0x70, 4} } }, \
	{0, {{I2C_MUX_PCA9547, 0x70, 5} } }, \
	{0, {{I2C_MUX_PCA9547, 0x70, 6} } }, \
	{0, {{I2C_MUX_PCA9547, 0x70, 7} } }, \
	}

	#define CONFIG_BCH

	#define CONFIG_BOOTCOUNT_LIMIT
	#define CONFIG_BOOTCOUNT_EXT
	#define CONFIG_SYS_BOOTCOUNT_EXT_INTERFACE "mmc"
	#define CONFIG_SYS_BOOTCOUNT_EXT_DEVPART "1:5"
	#define CONFIG_SYS_BOOTCOUNT_EXT_NAME "/boot/failures"
	#define CONFIG_SYS_BOOTCOUNT_ADDR 0x7000A000

	#endif /* __GE_BX50V3_CONFIG_H */