| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (C) 2017 Intel Corp. |
| * Copyright 2019 Google LLC |
| * |
| * Taken partly from coreboot gpio.c |
| */ |
| |
| #define LOG_CATEGORY UCLASS_GPIO |
| |
| #include <common.h> |
| #include <dm.h> |
| #include <dt-structs.h> |
| #include <log.h> |
| #include <p2sb.h> |
| #include <asm/intel_pinctrl.h> |
| #include <asm-generic/gpio.h> |
| #include <asm/intel_pinctrl_defs.h> |
| |
| /** |
| * struct apl_gpio_platdata - platform data for each device |
| * |
| * @dtplat: of-platdata data from C struct |
| */ |
| struct apl_gpio_platdata { |
| #if CONFIG_IS_ENABLED(OF_PLATDATA) |
| /* Put this first since driver model will copy the data here */ |
| struct dtd_intel_apl_pinctrl dtplat; |
| #endif |
| }; |
| |
| static const struct reset_mapping rst_map[] = { |
| { .logical = PAD_CFG0_LOGICAL_RESET_PWROK, .chipset = 0U << 30 }, |
| { .logical = PAD_CFG0_LOGICAL_RESET_DEEP, .chipset = 1U << 30 }, |
| { .logical = PAD_CFG0_LOGICAL_RESET_PLTRST, .chipset = 2U << 30 }, |
| }; |
| |
| /* Groups for each community */ |
| static const struct pad_group apl_community_n_groups[] = { |
| INTEL_GPP(N_OFFSET, N_OFFSET, GPIO_31), /* NORTH 0 */ |
| INTEL_GPP(N_OFFSET, GPIO_32, JTAG_TRST_B), /* NORTH 1 */ |
| INTEL_GPP(N_OFFSET, JTAG_TMS, SVID0_CLK), /* NORTH 2 */ |
| }; |
| |
| static const struct pad_group apl_community_w_groups[] = { |
| INTEL_GPP(W_OFFSET, W_OFFSET, OSC_CLK_OUT_1), /* WEST 0 */ |
| INTEL_GPP(W_OFFSET, OSC_CLK_OUT_2, SUSPWRDNACK),/* WEST 1 */ |
| }; |
| |
| static const struct pad_group apl_community_sw_groups[] = { |
| INTEL_GPP(SW_OFFSET, SW_OFFSET, SMB_ALERTB), /* SOUTHWEST 0 */ |
| INTEL_GPP(SW_OFFSET, SMB_CLK, LPC_FRAMEB), /* SOUTHWEST 1 */ |
| }; |
| |
| static const struct pad_group apl_community_nw_groups[] = { |
| INTEL_GPP(NW_OFFSET, NW_OFFSET, PROCHOT_B), /* NORTHWEST 0 */ |
| INTEL_GPP(NW_OFFSET, PMIC_I2C_SCL, GPIO_106), /* NORTHWEST 1 */ |
| INTEL_GPP(NW_OFFSET, GPIO_109, GPIO_123), /* NORTHWEST 2 */ |
| }; |
| |
| /* TODO(sjg@chromium.org): Consider moving this to device tree */ |
| static const struct pad_community apl_gpio_communities[] = { |
| { |
| .port = PID_GPIO_N, |
| .first_pad = N_OFFSET, |
| .last_pad = SVID0_CLK, |
| .num_gpi_regs = NUM_N_GPI_REGS, |
| .gpi_status_offset = NUM_NW_GPI_REGS + NUM_W_GPI_REGS |
| + NUM_SW_GPI_REGS, |
| .pad_cfg_base = PAD_CFG_BASE, |
| .host_own_reg_0 = HOSTSW_OWN_REG_0, |
| .gpi_int_sts_reg_0 = GPI_INT_STS_0, |
| .gpi_int_en_reg_0 = GPI_INT_EN_0, |
| .gpi_smi_sts_reg_0 = GPI_SMI_STS_0, |
| .gpi_smi_en_reg_0 = GPI_SMI_EN_0, |
| .max_pads_per_group = GPIO_MAX_NUM_PER_GROUP, |
| .name = "GPIO_GPE_N", |
| .acpi_path = "\\_SB.GPO0", |
| .reset_map = rst_map, |
| .num_reset_vals = ARRAY_SIZE(rst_map), |
| .groups = apl_community_n_groups, |
| .num_groups = ARRAY_SIZE(apl_community_n_groups), |
| }, { |
| .port = PID_GPIO_NW, |
| .first_pad = NW_OFFSET, |
| .last_pad = GPIO_123, |
| .num_gpi_regs = NUM_NW_GPI_REGS, |
| .gpi_status_offset = NUM_W_GPI_REGS + NUM_SW_GPI_REGS, |
| .pad_cfg_base = PAD_CFG_BASE, |
| .host_own_reg_0 = HOSTSW_OWN_REG_0, |
| .gpi_int_sts_reg_0 = GPI_INT_STS_0, |
| .gpi_int_en_reg_0 = GPI_INT_EN_0, |
| .gpi_smi_sts_reg_0 = GPI_SMI_STS_0, |
| .gpi_smi_en_reg_0 = GPI_SMI_EN_0, |
| .max_pads_per_group = GPIO_MAX_NUM_PER_GROUP, |
| .name = "GPIO_GPE_NW", |
| .acpi_path = "\\_SB.GPO1", |
| .reset_map = rst_map, |
| .num_reset_vals = ARRAY_SIZE(rst_map), |
| .groups = apl_community_nw_groups, |
| .num_groups = ARRAY_SIZE(apl_community_nw_groups), |
| }, { |
| .port = PID_GPIO_W, |
| .first_pad = W_OFFSET, |
| .last_pad = SUSPWRDNACK, |
| .num_gpi_regs = NUM_W_GPI_REGS, |
| .gpi_status_offset = NUM_SW_GPI_REGS, |
| .pad_cfg_base = PAD_CFG_BASE, |
| .host_own_reg_0 = HOSTSW_OWN_REG_0, |
| .gpi_int_sts_reg_0 = GPI_INT_STS_0, |
| .gpi_int_en_reg_0 = GPI_INT_EN_0, |
| .gpi_smi_sts_reg_0 = GPI_SMI_STS_0, |
| .gpi_smi_en_reg_0 = GPI_SMI_EN_0, |
| .max_pads_per_group = GPIO_MAX_NUM_PER_GROUP, |
| .name = "GPIO_GPE_W", |
| .acpi_path = "\\_SB.GPO2", |
| .reset_map = rst_map, |
| .num_reset_vals = ARRAY_SIZE(rst_map), |
| .groups = apl_community_w_groups, |
| .num_groups = ARRAY_SIZE(apl_community_w_groups), |
| }, { |
| .port = PID_GPIO_SW, |
| .first_pad = SW_OFFSET, |
| .last_pad = LPC_FRAMEB, |
| .num_gpi_regs = NUM_SW_GPI_REGS, |
| .gpi_status_offset = 0, |
| .pad_cfg_base = PAD_CFG_BASE, |
| .host_own_reg_0 = HOSTSW_OWN_REG_0, |
| .gpi_int_sts_reg_0 = GPI_INT_STS_0, |
| .gpi_int_en_reg_0 = GPI_INT_EN_0, |
| .gpi_smi_sts_reg_0 = GPI_SMI_STS_0, |
| .gpi_smi_en_reg_0 = GPI_SMI_EN_0, |
| .max_pads_per_group = GPIO_MAX_NUM_PER_GROUP, |
| .name = "GPIO_GPE_SW", |
| .acpi_path = "\\_SB.GPO3", |
| .reset_map = rst_map, |
| .num_reset_vals = ARRAY_SIZE(rst_map), |
| .groups = apl_community_sw_groups, |
| .num_groups = ARRAY_SIZE(apl_community_sw_groups), |
| }, |
| }; |
| |
| static int apl_pinctrl_ofdata_to_platdata(struct udevice *dev) |
| { |
| struct p2sb_child_platdata *pplat; |
| const struct pad_community *comm = NULL; |
| int i; |
| |
| #if CONFIG_IS_ENABLED(OF_PLATDATA) |
| struct apl_gpio_platdata *plat = dev_get_platdata(dev); |
| int ret; |
| |
| /* |
| * It would be nice to do this in the bind() method, but with |
| * of-platdata binding happens in the order that DM finds things in the |
| * linker list (i.e. alphabetical order by driver name). So the GPIO |
| * device may well be bound before its parent (p2sb), and this call |
| * will fail if p2sb is not bound yet. |
| * |
| * TODO(sjg@chromium.org): Add a parent pointer to child devices in dtoc |
| */ |
| ret = p2sb_set_port_id(dev, plat->dtplat.intel_p2sb_port_id); |
| if (ret) |
| return log_msg_ret("Could not set port id", ret); |
| #endif |
| /* Attach this device to its community structure */ |
| pplat = dev_get_parent_platdata(dev); |
| for (i = 0; i < ARRAY_SIZE(apl_gpio_communities); i++) { |
| if (apl_gpio_communities[i].port == pplat->pid) |
| comm = &apl_gpio_communities[i]; |
| } |
| |
| return intel_pinctrl_ofdata_to_platdata(dev, comm, 2); |
| } |
| |
| static const struct udevice_id apl_gpio_ids[] = { |
| { .compatible = "intel,apl-pinctrl"}, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(apl_pinctrl_drv) = { |
| .name = "intel_apl_pinctrl", |
| .id = UCLASS_PINCTRL, |
| .of_match = apl_gpio_ids, |
| .probe = intel_pinctrl_probe, |
| .ops = &intel_pinctrl_ops, |
| #if !CONFIG_IS_ENABLED(OF_PLATDATA) |
| .bind = dm_scan_fdt_dev, |
| #endif |
| .ofdata_to_platdata = apl_pinctrl_ofdata_to_platdata, |
| .priv_auto_alloc_size = sizeof(struct intel_pinctrl_priv), |
| .platdata_auto_alloc_size = sizeof(struct apl_gpio_platdata), |
| }; |