usb:ehci-mx6 add phy mode query function
usb_phy_enable should return status bit, but not phy mode bit, thus
add a new function usb_phy_mode to query the PHY for it's mode and
make usb_phy_enable just return 0 but not 'phy_ctrl & USBPHY_CTRL_OTG_ID'.
Include a new board weak function board_usb_phy_mode. If board code
does not reimplement this function, it just call usb_phy_mode and return
usb_phy_mode's return value. The reason to include such a weak function
is: " SOC OTG core <--connect--> board HOST port, but no pin id for
the board host port, so board can not use usb_phy_mode to return the
phy mode, but define it's own rule."
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Signed-off-by: Ye Li <B37916@freescale.com>
diff --git a/drivers/usb/host/ehci-mx6.c b/drivers/usb/host/ehci-mx6.c
index 9ec5a0a..951dd3b 100644
--- a/drivers/usb/host/ehci-mx6.c
+++ b/drivers/usb/host/ehci-mx6.c
@@ -160,7 +160,7 @@
val |= (USBPHY_CTRL_ENUTMILEVEL2 | USBPHY_CTRL_ENUTMILEVEL3);
__raw_writel(val, phy_ctrl);
- return val & USBPHY_CTRL_OTG_ID;
+ return 0;
}
/* Base address for this IP block is 0x02184800 */
@@ -193,6 +193,28 @@
__raw_writel(val, ctrl);
}
+int usb_phy_mode(int port)
+{
+ void __iomem *phy_reg;
+ void __iomem *phy_ctrl;
+ u32 val;
+
+ phy_reg = (void __iomem *)phy_bases[port];
+ phy_ctrl = (void __iomem *)(phy_reg + USBPHY_CTRL);
+
+ val = __raw_readl(phy_ctrl);
+
+ if (val & USBPHY_CTRL_OTG_ID)
+ return USB_INIT_DEVICE;
+ else
+ return USB_INIT_HOST;
+}
+
+int __weak board_usb_phy_mode(int port)
+{
+ return usb_phy_mode(port);
+}
+
int __weak board_ehci_hcd_init(int port)
{
return 0;
@@ -221,7 +243,8 @@
usb_power_config(index);
usb_oc_config(index);
usb_internal_phy_clock_gate(index, 1);
- type = usb_phy_enable(index, ehci) ? USB_INIT_DEVICE : USB_INIT_HOST;
+ usb_phy_enable(index, ehci);
+ type = board_usb_phy_mode(index);
*hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength);
*hcor = (struct ehci_hcor *)((uint32_t)*hccr +