arch/x86/cpu/start.S - filogic/uboot - Gitiles

 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
  *  U-Boot - x86 Startup Code
  *
  * This is always the first code to run from the U-Boot source. To spell it out:
  *
  * 1. When TPL (Tertiary Program Loader) is enabled, the boot flow is
  * TPL->SPL->U-Boot and this file is used for TPL. Then start_from_tpl.S is used
  * for SPL and start_from_spl.S is used for U-Boot proper.
  *
  * 2. When SPL (Secondary Program Loader) is enabled, but not TPL, the boot
  * flow is SPL->U-Boot and this file is used for SPL. Then start_from_spl.S is
  * used for U-Boot proper.
  *
  * 3. When neither TPL nor SPL is used, this file is used for U-Boot proper.
  *
  * (C) Copyright 2008-2011
  * Graeme Russ, <graeme.russ@gmail.com>
  *
  * (C) Copyright 2002
  * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
  */

 #include <config.h>
 #include <asm/global_data.h>
 #include <asm/post.h>
 #include <asm/processor.h>
 #include <asm/processor-flags.h>
 #include <generated/generic-asm-offsets.h>
 #include <generated/asm-offsets.h>
 #include <linux/linkage.h>

 .section .text.start
 .code32
 .globl _start
 .type _start, @function
 .globl _x86boot_start
 _x86boot_start:
 	/*
 	 * This is the fail-safe 32-bit bootstrap entry point.
 	 *
 	 * This code is used when booting from another boot loader like
 	 * coreboot or EFI. So we repeat some of the same init found in
 	 * start16.
 	 */
 	cli
 	cld

 	/* Turn off cache (this might require a 486-class CPU) */
 	movl	%cr0, %eax
 	orl	$(X86_CR0_NW | X86_CR0_CD), %eax
 	movl	%eax, %cr0
 	invd

 	/*
 	 * Zero the BIST (Built-In Self Test) value since we don't have it.
 	 * It must be 0 or the previous loader would have reported an error.
 	 */
 	movl	$0, %ebp

 	jmp	1f

 	/* Add a way for tools to discover the _start entry point */
 	.align	4
 	.long	0x12345678
 _start:
 	/* This is the 32-bit cold-reset entry point, coming from start16 */

 	/* Save BIST */
 	movl	%eax, %ebp
 1:

 	/* Save table pointer */
 	movl	%ecx, %esi

 #ifdef CONFIG_X86_LOAD_FROM_32_BIT
 	lgdt	gdt_ptr2
 #endif

 	/* Load the segement registers to match the GDT loaded in start16.S */
 	movl	$(X86_GDT_ENTRY_32BIT_DS * X86_GDT_ENTRY_SIZE), %eax
 	movw	%ax, %fs
 	movw	%ax, %ds
 	movw	%ax, %gs
 	movw	%ax, %es
 	movw	%ax, %ss

 	/* Clear the interrupt vectors */
 	lidt	blank_idt_ptr

 	/*
 	 * Critical early platform init - generally not used, we prefer init
 	 * to happen later when we have a console, in case something goes
 	 * wrong.
 	 */
 	jmp	early_board_init
 .globl early_board_init_ret
 early_board_init_ret:
 	post_code(POST_START)

 	/* Initialise Cache-As-RAM */
 	jmp	car_init
 .globl car_init_ret
 car_init_ret:
 #ifdef CONFIG_USE_CAR
 	/*
 	 * We now have CONFIG_SYS_CAR_SIZE bytes of Cache-As-RAM (or SRAM,
 	 * or fully initialised SDRAM - we really don't care which)
 	 * starting at CONFIG_SYS_CAR_ADDR to be used as a temporary stack
 	 * and early malloc() area. The MRC requires some space at the top.
 	 *
 	 * Stack grows down from top of CAR. We have:
 	 *
 	 * top-> CONFIG_SYS_CAR_ADDR + CONFIG_SYS_CAR_SIZE
 	 *	MRC area
 	 *	global_data with x86 global descriptor table
 	 *	early malloc area
 	 *	stack
 	 * bottom-> CONFIG_SYS_CAR_ADDR
 	 */
 	movl	$(CONFIG_SYS_CAR_ADDR + CONFIG_SYS_CAR_SIZE - 4), %esp
 #ifdef CONFIG_DCACHE_RAM_MRC_VAR_SIZE
 	subl	$CONFIG_DCACHE_RAM_MRC_VAR_SIZE, %esp
 #endif
 #else
 	/*
 	 * U-Boot enters here twice. For the first time it comes from
 	 * car_init_done() with esp points to a temporary stack and esi
 	 * set to zero. For the second time it comes from fsp_init_done()
 	 * with esi holding the HOB list address returned by the FSP.
 	 */
 #endif
 	/* Set up global data */
 	mov	%esp, %eax
 	call	board_init_f_alloc_reserve
 	mov	%eax, %esp
 	call	board_init_f_init_reserve

 #ifdef CONFIG_DEBUG_UART
 	call	debug_uart_init
 #endif

 	/* Get address of global_data */
 	mov	%fs:0, %edx
 #if defined(CONFIG_USE_HOB) && !defined(CONFIG_USE_CAR)
 	/* Store the HOB list if we have one */
 	test	%esi, %esi
 	jz	skip_hob
 	movl	%esi, GD_HOB_LIST(%edx)

 #ifdef CONFIG_HAVE_FSP
 	/*
 	 * After fsp_init() returns, the stack has already been switched to a
 	 * place within system memory as defined by CONFIG_FSP_TEMP_RAM_ADDR.
 	 * Enlarge the size of malloc() pool before relocation since we have
 	 * plenty of memory now.
 	 */
 	subl	$CONFIG_FSP_SYS_MALLOC_F_LEN, %esp
 	movl	%esp, GD_MALLOC_BASE(%edx)
 #endif
 skip_hob:
 #else
 	/* Store table pointer */
 	movl	%esi, GD_TABLE(%edx)
 #endif
 	/* Store BIST */
 	movl	%ebp, GD_BIST(%edx)

 	/* Set parameter to board_init_f() to boot flags */
 	post_code(POST_START_DONE)
 	xorl	%eax, %eax

 	/* Enter, U-Boot! */
 	call	board_init_f

 	/* indicate (lack of) progress */
 	movw	$0x85, %ax
 	jmp	die

 .globl board_init_f_r_trampoline
 .type board_init_f_r_trampoline, @function
 board_init_f_r_trampoline:
 	/*
 	 * SDRAM has been initialised, U-Boot code has been copied into
 	 * RAM, BSS has been cleared and relocation adjustments have been
 	 * made. It is now time to jump into the in-RAM copy of U-Boot
 	 *
 	 * %eax = Address of top of new stack
 	 */

 	/* Stack grows down from top of SDRAM */
 	movl	%eax, %esp

 	/* See if we need to disable CAR */
 	call	car_uninit

 	/* Re-enter U-Boot by calling board_init_f_r() */
 	call	board_init_f_r

 #ifdef CONFIG_TPL
 .globl jump_to_spl
 .type jump_to_spl, @function
 jump_to_spl:
 	/* Reset stack to the top of CAR space */
 	movl	$(CONFIG_SYS_CAR_ADDR + CONFIG_SYS_CAR_SIZE - 4), %esp
 #ifdef CONFIG_DCACHE_RAM_MRC_VAR_SIZE
 	subl	$CONFIG_DCACHE_RAM_MRC_VAR_SIZE, %esp
 #endif

 	jmp	*%eax
 #endif

 die:
 	hlt
 	jmp	die
 	hlt

 WEAK(car_uninit)
 	ret
 ENDPROC(car_uninit)

 blank_idt_ptr:
 	.word	0		/* limit */
 	.long	0		/* base */

 	.p2align	2	/* force 4-byte alignment */

 	/* Add a multiboot header so U-Boot can be loaded by GRUB2 */
 multiboot_header:
 	/* magic */
 	.long	0x1badb002
 	/* flags */
 	.long	(1 << 16)
 	/* checksum */
 	.long	-0x1BADB002 - (1 << 16)
 	/* header addr */
 	.long	multiboot_header - _x86boot_start + CONFIG_SYS_TEXT_BASE
 	/* load addr */
 	.long	CONFIG_SYS_TEXT_BASE
 	/* load end addr */
 	.long	0
 	/* bss end addr */
 	.long	0
 	/* entry addr */
 	.long	CONFIG_SYS_TEXT_BASE

 #ifdef CONFIG_X86_LOAD_FROM_32_BIT
 	/*
 	 * The following Global Descriptor Table is just enough to get us into
 	 * 'Flat Protected Mode' - It will be discarded as soon as the final
 	 * GDT is setup in a safe location in RAM
 	 */
 gdt_ptr2:
 	.word	0x1f		/* limit (31 bytes = 4 GDT entries - 1) */
 	.long	gdt_rom2	/* base */

 	/* Some CPUs are picky about GDT alignment... */
 	.align	16
 .globl gdt_rom2
 gdt_rom2:
 	/*
 	 * The GDT table ...
 	 *
 	 *	 Selector	Type
 	 *	 0x00		NULL
 	 *	 0x08		Unused
 	 *	 0x10		32bit code
 	 *	 0x18		32bit data/stack
 	 */
 	/* The NULL Desciptor - Mandatory */
 	.word	0x0000		/* limit_low */
 	.word	0x0000		/* base_low */
 	.byte	0x00		/* base_middle */
 	.byte	0x00		/* access */
 	.byte	0x00		/* flags + limit_high */
 	.byte	0x00		/* base_high */

 	/* Unused Desciptor - (matches Linux) */
 	.word	0x0000		/* limit_low */
 	.word	0x0000		/* base_low */
 	.byte	0x00		/* base_middle */
 	.byte	0x00		/* access */
 	.byte	0x00		/* flags + limit_high */
 	.byte	0x00		/* base_high */

 	/*
 	 * The Code Segment Descriptor:
 	 * - Base   = 0x00000000
 	 * - Size   = 4GB
 	 * - Access = Present, Ring 0, Exec (Code), Readable
 	 * - Flags  = 4kB Granularity, 32-bit
 	 */
 	.word	0xffff		/* limit_low */
 	.word	0x0000		/* base_low */
 	.byte	0x00		/* base_middle */
 	.byte	0x9b		/* access */
 	.byte	0xcf		/* flags + limit_high */
 	.byte	0x00		/* base_high */

 	/*
 	 * The Data Segment Descriptor:
 	 * - Base   = 0x00000000
 	 * - Size   = 4GB
 	 * - Access = Present, Ring 0, Non-Exec (Data), Writable
 	 * - Flags  = 4kB Granularity, 32-bit
 	 */
 	.word	0xffff		/* limit_low */
 	.word	0x0000		/* base_low */
 	.byte	0x00		/* base_middle */
 	.byte	0x93		/* access */
 	.byte	0xcf		/* flags + limit_high */
 	.byte	0x00		/* base_high */
 #endif
	/* SPDX-License-Identifier: GPL-2.0+ */
	/*
	* U-Boot - x86 Startup Code
	*
	* This is always the first code to run from the U-Boot source. To spell it out:
	*
	* 1. When TPL (Tertiary Program Loader) is enabled, the boot flow is
	* TPL->SPL->U-Boot and this file is used for TPL. Then start_from_tpl.S is used
	* for SPL and start_from_spl.S is used for U-Boot proper.
	*
	* 2. When SPL (Secondary Program Loader) is enabled, but not TPL, the boot
	* flow is SPL->U-Boot and this file is used for SPL. Then start_from_spl.S is
	* used for U-Boot proper.
	*
	* 3. When neither TPL nor SPL is used, this file is used for U-Boot proper.
	*
	* (C) Copyright 2008-2011
	* Graeme Russ, <graeme.russ@gmail.com>
	*
	* (C) Copyright 2002
	* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
	*/

	#include <config.h>
	#include <asm/global_data.h>
	#include <asm/post.h>
	#include <asm/processor.h>
	#include <asm/processor-flags.h>
	#include <generated/generic-asm-offsets.h>
	#include <generated/asm-offsets.h>
	#include <linux/linkage.h>

	.section .text.start
	.code32
	.globl _start
	.type _start, @function
	.globl _x86boot_start
	_x86boot_start:
	/*
	* This is the fail-safe 32-bit bootstrap entry point.
	*
	* This code is used when booting from another boot loader like
	* coreboot or EFI. So we repeat some of the same init found in
	* start16.
	*/
	cli
	cld

	/* Turn off cache (this might require a 486-class CPU) */
	movl %cr0, %eax
	orl $(X86_CR0_NW \| X86_CR0_CD), %eax
	movl %eax, %cr0
	invd

	/*
	* Zero the BIST (Built-In Self Test) value since we don't have it.
	* It must be 0 or the previous loader would have reported an error.
	*/
	movl $0, %ebp

	jmp 1f

	/* Add a way for tools to discover the _start entry point */
	.align 4
	.long 0x12345678
	_start:
	/* This is the 32-bit cold-reset entry point, coming from start16 */

	/* Save BIST */
	movl %eax, %ebp
	1:

	/* Save table pointer */
	movl %ecx, %esi

	#ifdef CONFIG_X86_LOAD_FROM_32_BIT
	lgdt gdt_ptr2
	#endif

	/* Load the segement registers to match the GDT loaded in start16.S */
	movl $(X86_GDT_ENTRY_32BIT_DS * X86_GDT_ENTRY_SIZE), %eax
	movw %ax, %fs
	movw %ax, %ds
	movw %ax, %gs
	movw %ax, %es
	movw %ax, %ss

	/* Clear the interrupt vectors */
	lidt blank_idt_ptr

	/*
	* Critical early platform init - generally not used, we prefer init
	* to happen later when we have a console, in case something goes
	* wrong.
	*/
	jmp early_board_init
	.globl early_board_init_ret
	early_board_init_ret:
	post_code(POST_START)

	/* Initialise Cache-As-RAM */
	jmp car_init
	.globl car_init_ret
	car_init_ret:
	#ifdef CONFIG_USE_CAR
	/*
	* We now have CONFIG_SYS_CAR_SIZE bytes of Cache-As-RAM (or SRAM,
	* or fully initialised SDRAM - we really don't care which)
	* starting at CONFIG_SYS_CAR_ADDR to be used as a temporary stack
	* and early malloc() area. The MRC requires some space at the top.
	*
	* Stack grows down from top of CAR. We have:
	*
	* top-> CONFIG_SYS_CAR_ADDR + CONFIG_SYS_CAR_SIZE
	* MRC area
	* global_data with x86 global descriptor table
	* early malloc area
	* stack
	* bottom-> CONFIG_SYS_CAR_ADDR
	*/
	movl $(CONFIG_SYS_CAR_ADDR + CONFIG_SYS_CAR_SIZE - 4), %esp
	#ifdef CONFIG_DCACHE_RAM_MRC_VAR_SIZE
	subl $CONFIG_DCACHE_RAM_MRC_VAR_SIZE, %esp
	#endif
	#else
	/*
	* U-Boot enters here twice. For the first time it comes from
	* car_init_done() with esp points to a temporary stack and esi
	* set to zero. For the second time it comes from fsp_init_done()
	* with esi holding the HOB list address returned by the FSP.
	*/
	#endif
	/* Set up global data */
	mov %esp, %eax
	call board_init_f_alloc_reserve
	mov %eax, %esp
	call board_init_f_init_reserve

	#ifdef CONFIG_DEBUG_UART
	call debug_uart_init
	#endif

	/* Get address of global_data */
	mov %fs:0, %edx
	#if defined(CONFIG_USE_HOB) && !defined(CONFIG_USE_CAR)
	/* Store the HOB list if we have one */
	test %esi, %esi
	jz skip_hob
	movl %esi, GD_HOB_LIST(%edx)

	#ifdef CONFIG_HAVE_FSP
	/*
	* After fsp_init() returns, the stack has already been switched to a
	* place within system memory as defined by CONFIG_FSP_TEMP_RAM_ADDR.
	* Enlarge the size of malloc() pool before relocation since we have
	* plenty of memory now.
	*/
	subl $CONFIG_FSP_SYS_MALLOC_F_LEN, %esp
	movl %esp, GD_MALLOC_BASE(%edx)
	#endif
	skip_hob:
	#else
	/* Store table pointer */
	movl %esi, GD_TABLE(%edx)
	#endif
	/* Store BIST */
	movl %ebp, GD_BIST(%edx)

	/* Set parameter to board_init_f() to boot flags */
	post_code(POST_START_DONE)
	xorl %eax, %eax

	/* Enter, U-Boot! */
	call board_init_f

	/* indicate (lack of) progress */
	movw $0x85, %ax
	jmp die

	.globl board_init_f_r_trampoline
	.type board_init_f_r_trampoline, @function
	board_init_f_r_trampoline:
	/*
	* SDRAM has been initialised, U-Boot code has been copied into
	* RAM, BSS has been cleared and relocation adjustments have been
	* made. It is now time to jump into the in-RAM copy of U-Boot
	*
	* %eax = Address of top of new stack
	*/

	/* Stack grows down from top of SDRAM */
	movl %eax, %esp

	/* See if we need to disable CAR */
	call car_uninit

	/* Re-enter U-Boot by calling board_init_f_r() */
	call board_init_f_r

	#ifdef CONFIG_TPL
	.globl jump_to_spl
	.type jump_to_spl, @function
	jump_to_spl:
	/* Reset stack to the top of CAR space */
	movl $(CONFIG_SYS_CAR_ADDR + CONFIG_SYS_CAR_SIZE - 4), %esp
	#ifdef CONFIG_DCACHE_RAM_MRC_VAR_SIZE
	subl $CONFIG_DCACHE_RAM_MRC_VAR_SIZE, %esp
	#endif

	jmp *%eax
	#endif

	die:
	hlt
	jmp die
	hlt

	WEAK(car_uninit)
	ret
	ENDPROC(car_uninit)

	blank_idt_ptr:
	.word 0 /* limit */
	.long 0 /* base */

	.p2align 2 /* force 4-byte alignment */

	/* Add a multiboot header so U-Boot can be loaded by GRUB2 */
	multiboot_header:
	/* magic */
	.long 0x1badb002
	/* flags */
	.long (1 << 16)
	/* checksum */
	.long -0x1BADB002 - (1 << 16)
	/* header addr */
	.long multiboot_header - _x86boot_start + CONFIG_SYS_TEXT_BASE
	/* load addr */
	.long CONFIG_SYS_TEXT_BASE
	/* load end addr */
	.long 0
	/* bss end addr */
	.long 0
	/* entry addr */
	.long CONFIG_SYS_TEXT_BASE

	#ifdef CONFIG_X86_LOAD_FROM_32_BIT
	/*
	* The following Global Descriptor Table is just enough to get us into
	* 'Flat Protected Mode' - It will be discarded as soon as the final
	* GDT is setup in a safe location in RAM
	*/
	gdt_ptr2:
	.word 0x1f /* limit (31 bytes = 4 GDT entries - 1) */
	.long gdt_rom2 /* base */

	/* Some CPUs are picky about GDT alignment... */
	.align 16
	.globl gdt_rom2
	gdt_rom2:
	/*
	* The GDT table ...
	*
	* Selector Type
	* 0x00 NULL
	* 0x08 Unused
	* 0x10 32bit code
	* 0x18 32bit data/stack
	*/
	/* The NULL Desciptor - Mandatory */
	.word 0x0000 /* limit_low */
	.word 0x0000 /* base_low */
	.byte 0x00 /* base_middle */
	.byte 0x00 /* access */
	.byte 0x00 /* flags + limit_high */
	.byte 0x00 /* base_high */

	/* Unused Desciptor - (matches Linux) */
	.word 0x0000 /* limit_low */
	.word 0x0000 /* base_low */
	.byte 0x00 /* base_middle */
	.byte 0x00 /* access */
	.byte 0x00 /* flags + limit_high */
	.byte 0x00 /* base_high */

	/*
	* The Code Segment Descriptor:
	* - Base = 0x00000000
	* - Size = 4GB
	* - Access = Present, Ring 0, Exec (Code), Readable
	* - Flags = 4kB Granularity, 32-bit
	*/
	.word 0xffff /* limit_low */
	.word 0x0000 /* base_low */
	.byte 0x00 /* base_middle */
	.byte 0x9b /* access */
	.byte 0xcf /* flags + limit_high */
	.byte 0x00 /* base_high */

	/*
	* The Data Segment Descriptor:
	* - Base = 0x00000000
	* - Size = 4GB
	* - Access = Present, Ring 0, Non-Exec (Data), Writable
	* - Flags = 4kB Granularity, 32-bit
	*/
	.word 0xffff /* limit_low */
	.word 0x0000 /* base_low */
	.byte 0x00 /* base_middle */
	.byte 0x93 /* access */
	.byte 0xcf /* flags + limit_high */
	.byte 0x00 /* base_high */
	#endif