drivers/pci_auto.c - filogic/uboot - Gitiles

 /*
  * arch/ppc/kernel/pci_auto.c
  *
  * PCI autoconfiguration library
  *
  * Author: Matt Porter <mporter@mvista.com>
  *
  * Copyright 2000 MontaVista Software Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  */

 #include <common.h>

 #ifdef CONFIG_PCI

 #include <pci.h>

 #undef DEBUG
 #ifdef DEBUG
 #define DEBUGF(x...) printf(x)
 #else
 #define DEBUGF(x...)
 #endif /* DEBUG */

 #define	PCIAUTO_IDE_MODE_MASK		0x05

 /*
  *
  */

 void pciauto_region_init(struct pci_region* res)
 {
 	/*
 	 * Avoid allocating PCI resources from address 0 -- this is illegal
 	 * according to PCI 2.1 and moreover, this is known to cause Linux IDE
 	 * drivers to fail. Use a reasonable starting value of 0x1000 instead.
 	 */
 	res->bus_lower = res->bus_start ? res->bus_start : 0x1000;
 }

 void pciauto_region_align(struct pci_region *res, unsigned long size)
 {
 	res->bus_lower = ((res->bus_lower - 1) | (size - 1)) + 1;
 }

 int pciauto_region_allocate(struct pci_region* res, unsigned int size, unsigned int *bar)
 {
 	unsigned long addr;

 	if (!res) {
 		DEBUGF("No resource");
 		goto error;
 	}

 	addr = ((res->bus_lower - 1) | (size - 1)) + 1;

 	if (addr - res->bus_start + size > res->size) {
 		DEBUGF("No room in resource");
 		goto error;
 	}

 	res->bus_lower = addr + size;

 	DEBUGF("address=0x%lx bus_lower=%x", addr, res->bus_lower);

 	*bar = addr;
 	return 0;

  error:
 	*bar = 0xffffffff;
 	return -1;
 }

 /*
  *
  */

 void pciauto_setup_device(struct pci_controller *hose,
 			  pci_dev_t dev, int bars_num,
 			  struct pci_region *mem,
 			  struct pci_region *prefetch,
 			  struct pci_region *io)
 {
 	unsigned int bar_value, bar_response, bar_size;
 	unsigned int cmdstat = 0;
 	struct pci_region *bar_res;
 	int bar, bar_nr = 0;
 	int found_mem64 = 0;

 	pci_hose_read_config_dword(hose, dev, PCI_COMMAND, &cmdstat);
 	cmdstat = (cmdstat & ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) | PCI_COMMAND_MASTER;

 	for (bar = PCI_BASE_ADDRESS_0; bar <= PCI_BASE_ADDRESS_0 + (bars_num*4); bar += 4) {
 		/* Tickle the BAR and get the response */
 		pci_hose_write_config_dword(hose, dev, bar, 0xffffffff);
 		pci_hose_read_config_dword(hose, dev, bar, &bar_response);

 		/* If BAR is not implemented go to the next BAR */
 		if (!bar_response)
 			continue;

 		found_mem64 = 0;

 		/* Check the BAR type and set our address mask */
 		if (bar_response & PCI_BASE_ADDRESS_SPACE) {
 			bar_size = ((~(bar_response & PCI_BASE_ADDRESS_IO_MASK))
 				   & 0xffff) + 1;
 			bar_res = io;

 			DEBUGF("PCI Autoconfig: BAR %d, I/O, size=0x%x, ", bar_nr, bar_size);
 		} else {
 			if ( (bar_response & PCI_BASE_ADDRESS_MEM_TYPE_MASK) ==
 			     PCI_BASE_ADDRESS_MEM_TYPE_64)
 				found_mem64 = 1;

 			bar_size = ~(bar_response & PCI_BASE_ADDRESS_MEM_MASK) + 1;
 			if (prefetch && (bar_response & PCI_BASE_ADDRESS_MEM_PREFETCH))
 				bar_res = prefetch;
 			else
 				bar_res = mem;

 			DEBUGF("PCI Autoconfig: BAR %d, Mem, size=0x%x, ", bar_nr, bar_size);
 		}

 		if (pciauto_region_allocate(bar_res, bar_size, &bar_value) == 0) {
 			/* Write it out and update our limit */
 			pci_hose_write_config_dword(hose, dev, bar, bar_value);

 			/*
 			 * If we are a 64-bit decoder then increment to the
 			 * upper 32 bits of the bar and force it to locate
 			 * in the lower 4GB of memory.
 			 */
 			if (found_mem64) {
 				bar += 4;
 				pci_hose_write_config_dword(hose, dev, bar, 0x00000000);
 			}

 			cmdstat |= (bar_response & PCI_BASE_ADDRESS_SPACE) ?
 				PCI_COMMAND_IO : PCI_COMMAND_MEMORY;
 		}

 		DEBUGF("\n");

 		bar_nr++;
 	}

 	pci_hose_write_config_dword(hose, dev, PCI_COMMAND, cmdstat);
 	pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08);
 	pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80);
 }

 void pciauto_prescan_setup_bridge(struct pci_controller *hose,
 					 pci_dev_t dev, int sub_bus)
 {
 	struct pci_region *pci_mem = hose->pci_mem;
 	struct pci_region *pci_prefetch = hose->pci_prefetch;
 	struct pci_region *pci_io = hose->pci_io;
 	unsigned int cmdstat;

 	pci_hose_read_config_dword(hose, dev, PCI_COMMAND, &cmdstat);

 	/* Configure bus number registers */
 	pci_hose_write_config_byte(hose, dev, PCI_PRIMARY_BUS,
 				   PCI_BUS(dev) - hose->first_busno);
 	pci_hose_write_config_byte(hose, dev, PCI_SECONDARY_BUS,
 				   sub_bus - hose->first_busno);
 	pci_hose_write_config_byte(hose, dev, PCI_SUBORDINATE_BUS, 0xff);

 	if (pci_mem) {
 		/* Round memory allocator to 1MB boundary */
 		pciauto_region_align(pci_mem, 0x100000);

 		/* Set up memory and I/O filter limits, assume 32-bit I/O space */
 		pci_hose_write_config_word(hose, dev, PCI_MEMORY_BASE,
 					(pci_mem->bus_lower & 0xfff00000) >> 16);

 		cmdstat |= PCI_COMMAND_MEMORY;
 	}

 	if (pci_prefetch) {
 		/* Round memory allocator to 1MB boundary */
 		pciauto_region_align(pci_prefetch, 0x100000);

 		/* Set up memory and I/O filter limits, assume 32-bit I/O space */
 		pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_BASE,
 					(pci_prefetch->bus_lower & 0xfff00000) >> 16);

 		cmdstat |= PCI_COMMAND_MEMORY;
 	} else {
 		/* We don't support prefetchable memory for now, so disable */
 		pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_BASE, 0x1000);
 		pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_LIMIT, 0x0);
 	}

 	if (pci_io) {
 		/* Round I/O allocator to 4KB boundary */
 		pciauto_region_align(pci_io, 0x1000);

 		pci_hose_write_config_byte(hose, dev, PCI_IO_BASE,
 					(pci_io->bus_lower & 0x0000f000) >> 8);
 		pci_hose_write_config_word(hose, dev, PCI_IO_BASE_UPPER16,
 					(pci_io->bus_lower & 0xffff0000) >> 16);

 		cmdstat |= PCI_COMMAND_IO;
 	}

 	/* Enable memory and I/O accesses, enable bus master */
 	pci_hose_write_config_dword(hose, dev, PCI_COMMAND, cmdstat | PCI_COMMAND_MASTER);
 }

 void pciauto_postscan_setup_bridge(struct pci_controller *hose,
 					  pci_dev_t dev, int sub_bus)
 {
 	struct pci_region *pci_mem = hose->pci_mem;
 	struct pci_region *pci_prefetch = hose->pci_prefetch;
 	struct pci_region *pci_io = hose->pci_io;

 	/* Configure bus number registers */
 	pci_hose_write_config_byte(hose, dev, PCI_SUBORDINATE_BUS,
 				   sub_bus - hose->first_busno);

 	if (pci_mem) {
 		/* Round memory allocator to 1MB boundary */
 		pciauto_region_align(pci_mem, 0x100000);

 		pci_hose_write_config_word(hose, dev, PCI_MEMORY_LIMIT,
 					(pci_mem->bus_lower-1) >> 16);
 	}

 	if (pci_prefetch) {
 		/* Round memory allocator to 1MB boundary */
 		pciauto_region_align(pci_prefetch, 0x100000);

 		pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_LIMIT,
 					(pci_prefetch->bus_lower-1) >> 16);
 	}

 	if (pci_io) {
 		/* Round I/O allocator to 4KB boundary */
 		pciauto_region_align(pci_io, 0x1000);

 		pci_hose_write_config_byte(hose, dev, PCI_IO_LIMIT,
 					((pci_io->bus_lower-1) & 0x0000f000) >> 8);
 		pci_hose_write_config_word(hose, dev, PCI_IO_LIMIT_UPPER16,
 					((pci_io->bus_lower-1) & 0xffff0000) >> 16);
 	}
 }

 /*
  *
  */

 void pciauto_config_init(struct pci_controller *hose)
 {
 	int i;

 	hose->pci_io = hose->pci_mem = NULL;

 	for (i=0; i<hose->region_count; i++) {
 		switch(hose->regions[i].flags) {
 		case PCI_REGION_IO:
 			if (!hose->pci_io ||
 			    hose->pci_io->size < hose->regions[i].size)
 				hose->pci_io = hose->regions + i;
 			break;
 		case PCI_REGION_MEM:
 			if (!hose->pci_mem ||
 			    hose->pci_mem->size < hose->regions[i].size)
 				hose->pci_mem = hose->regions + i;
 			break;
 		case (PCI_REGION_MEM | PCI_REGION_PREFETCH):
 			if (!hose->pci_prefetch ||
 			    hose->pci_prefetch->size < hose->regions[i].size)
 				hose->pci_prefetch = hose->regions + i;
 			break;
 		}
 	}


 	if (hose->pci_mem) {
 		pciauto_region_init(hose->pci_mem);

 		DEBUGF("PCI Autoconfig: Bus Memory region: [%lx-%lx],\n"
 		       "\t\tPhysical Memory [%x-%x]\n",
 		    hose->pci_mem->bus_start,
 		    hose->pci_mem->bus_start + hose->pci_mem->size - 1,
 		    hose->pci_mem->phys_start,
 		    hose->pci_mem->phys_start + hose->pci_mem->size - 1);
 	}

 	if (hose->pci_prefetch) {
 		pciauto_region_init(hose->pci_prefetch);

 		DEBUGF("PCI Autoconfig: Bus Prefetchable Mem: [%lx-%lx],\n"
 		       "\t\tPhysical Memory [%x-%x]\n",
 		    hose->pci_prefetch->bus_start,
 		    hose->pci_prefetch->bus_start + hose->pci_prefetch->size - 1,
 		    hose->pci_prefetch->phys_start,
 		    hose->pci_prefetch->phys_start +
 				hose->pci_prefetch->size - 1);
 	}

 	if (hose->pci_io) {
 		pciauto_region_init(hose->pci_io);

 		DEBUGF("PCI Autoconfig: Bus I/O region: [%lx-%lx],\n"
 		       "\t\tPhysical Memory: [%x-%x]\n",
 		    hose->pci_io->bus_start,
 		    hose->pci_io->bus_start + hose->pci_io->size - 1,
 		    hose->pci_io->phys_start,
 		    hose->pci_io->phys_start + hose->pci_io->size - 1);

 	}
 }

 /* HJF: Changed this to return int. I think this is required
  * to get the correct result when scanning bridges
  */
 int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev)
 {
 	unsigned int sub_bus = PCI_BUS(dev);
 	unsigned short class;
 	unsigned char prg_iface;
 	int n;

 	pci_hose_read_config_word(hose, dev, PCI_CLASS_DEVICE, &class);

 	switch(class) {
 	case PCI_CLASS_PROCESSOR_POWERPC: /* an agent or end-point */
 		DEBUGF("PCI AutoConfig: Found PowerPC device\n");
 		pciauto_setup_device(hose, dev, 6, hose->pci_mem,
 				     hose->pci_prefetch, hose->pci_io);
 		break;

 	case PCI_CLASS_BRIDGE_PCI:
 		hose->current_busno++;
 		pciauto_setup_device(hose, dev, 2, hose->pci_mem, hose->pci_prefetch, hose->pci_io);

 		DEBUGF("PCI Autoconfig: Found P2P bridge, device %d\n", PCI_DEV(dev));

 		/* Passing in current_busno allows for sibling P2P bridges */
 		pciauto_prescan_setup_bridge(hose, dev, hose->current_busno);
 		/*
 		 * need to figure out if this is a subordinate bridge on the bus
 		 * to be able to properly set the pri/sec/sub bridge registers.
 		 */
 		n = pci_hose_scan_bus(hose, hose->current_busno);

 		/* figure out the deepest we've gone for this leg */
 		sub_bus = max(n, sub_bus);
 		pciauto_postscan_setup_bridge(hose, dev, sub_bus);

 		sub_bus = hose->current_busno;
 		break;

 	case PCI_CLASS_STORAGE_IDE:
 		pci_hose_read_config_byte(hose, dev, PCI_CLASS_PROG, &prg_iface);
 		if (!(prg_iface & PCIAUTO_IDE_MODE_MASK)) {
 			DEBUGF("PCI Autoconfig: Skipping legacy mode IDE controller\n");
 			return sub_bus;
 		}

 		pciauto_setup_device(hose, dev, 6, hose->pci_mem, hose->pci_prefetch, hose->pci_io);
 		break;

 	case PCI_CLASS_BRIDGE_CARDBUS:
 		/* just do a minimal setup of the bridge, let the OS take care of the rest */
 		pciauto_setup_device(hose, dev, 0, hose->pci_mem, hose->pci_prefetch, hose->pci_io);

 		DEBUGF("PCI Autoconfig: Found P2CardBus bridge, device %d\n", PCI_DEV(dev));

 		hose->current_busno++;
 		break;

 #ifdef CONFIG_MPC5200
 	case PCI_CLASS_BRIDGE_OTHER:
 		DEBUGF("PCI Autoconfig: Skipping bridge device %d\n",
 		       PCI_DEV(dev));
 		break;
 #endif
 #ifdef CONFIG_MPC834X
 	case PCI_CLASS_BRIDGE_OTHER:
 		/*
 		 * The host/PCI bridge 1 seems broken in 8349 - it presents
 		 * itself as 'PCI_CLASS_BRIDGE_OTHER' and appears as an _agent_
 		 * device claiming resources io/mem/irq.. we only allow for
 		 * the PIMMR window to be allocated (BAR0 - 1MB size)
 		 */
 		DEBUGF("PCI Autoconfig: Broken bridge found, only minimal config\n");
 		pciauto_setup_device(hose, dev, 0, hose->pci_mem, hose->pci_prefetch, hose->pci_io);
 		break;
 #endif
 	default:
 		pciauto_setup_device(hose, dev, 6, hose->pci_mem, hose->pci_prefetch, hose->pci_io);
 		break;
 	}

 	return sub_bus;
 }

 #endif /* CONFIG_PCI */
	/*
	* arch/ppc/kernel/pci_auto.c
	*
	* PCI autoconfiguration library
	*
	* Author: Matt Porter <mporter@mvista.com>
	*
	* Copyright 2000 MontaVista Software Inc.
	*
	* This program is free software; you can redistribute it and/or modify it
	* under the terms of the GNU General Public License as published by the
	* Free Software Foundation; either version 2 of the License, or (at your
	* option) any later version.
	*/

	#include <common.h>

	#ifdef CONFIG_PCI

	#include <pci.h>

	#undef DEBUG
	#ifdef DEBUG
	#define DEBUGF(x...) printf(x)
	#else
	#define DEBUGF(x...)
	#endif /* DEBUG */

	#define PCIAUTO_IDE_MODE_MASK 0x05

	/*
	*
	*/

	void pciauto_region_init(struct pci_region* res)
	{
	/*
	* Avoid allocating PCI resources from address 0 -- this is illegal
	* according to PCI 2.1 and moreover, this is known to cause Linux IDE
	* drivers to fail. Use a reasonable starting value of 0x1000 instead.
	*/
	res->bus_lower = res->bus_start ? res->bus_start : 0x1000;
	}

	void pciauto_region_align(struct pci_region *res, unsigned long size)
	{
	res->bus_lower = ((res->bus_lower - 1) \| (size - 1)) + 1;
	}

	int pciauto_region_allocate(struct pci_region* res, unsigned int size, unsigned int *bar)
	{
	unsigned long addr;

	if (!res) {
	DEBUGF("No resource");
	goto error;
	}

	addr = ((res->bus_lower - 1) \| (size - 1)) + 1;

	if (addr - res->bus_start + size > res->size) {
	DEBUGF("No room in resource");
	goto error;
	}

	res->bus_lower = addr + size;

	DEBUGF("address=0x%lx bus_lower=%x", addr, res->bus_lower);

	*bar = addr;
	return 0;

	error:
	*bar = 0xffffffff;
	return -1;
	}

	/*
	*
	*/

	void pciauto_setup_device(struct pci_controller *hose,
	pci_dev_t dev, int bars_num,
	struct pci_region *mem,
	struct pci_region *prefetch,
	struct pci_region *io)
	{
	unsigned int bar_value, bar_response, bar_size;
	unsigned int cmdstat = 0;
	struct pci_region *bar_res;
	int bar, bar_nr = 0;
	int found_mem64 = 0;

	pci_hose_read_config_dword(hose, dev, PCI_COMMAND, &cmdstat);
	cmdstat = (cmdstat & ~(PCI_COMMAND_IO \| PCI_COMMAND_MEMORY)) \| PCI_COMMAND_MASTER;

	for (bar = PCI_BASE_ADDRESS_0; bar <= PCI_BASE_ADDRESS_0 + (bars_num*4); bar += 4) {
	/* Tickle the BAR and get the response */
	pci_hose_write_config_dword(hose, dev, bar, 0xffffffff);
	pci_hose_read_config_dword(hose, dev, bar, &bar_response);

	/* If BAR is not implemented go to the next BAR */
	if (!bar_response)
	continue;

	found_mem64 = 0;

	/* Check the BAR type and set our address mask */
	if (bar_response & PCI_BASE_ADDRESS_SPACE) {
	bar_size = ((~(bar_response & PCI_BASE_ADDRESS_IO_MASK))
	& 0xffff) + 1;
	bar_res = io;

	DEBUGF("PCI Autoconfig: BAR %d, I/O, size=0x%x, ", bar_nr, bar_size);
	} else {
	if ( (bar_response & PCI_BASE_ADDRESS_MEM_TYPE_MASK) ==
	PCI_BASE_ADDRESS_MEM_TYPE_64)
	found_mem64 = 1;

	bar_size = ~(bar_response & PCI_BASE_ADDRESS_MEM_MASK) + 1;
	if (prefetch && (bar_response & PCI_BASE_ADDRESS_MEM_PREFETCH))
	bar_res = prefetch;
	else
	bar_res = mem;

	DEBUGF("PCI Autoconfig: BAR %d, Mem, size=0x%x, ", bar_nr, bar_size);
	}

	if (pciauto_region_allocate(bar_res, bar_size, &bar_value) == 0) {
	/* Write it out and update our limit */
	pci_hose_write_config_dword(hose, dev, bar, bar_value);

	/*
	* If we are a 64-bit decoder then increment to the
	* upper 32 bits of the bar and force it to locate
	* in the lower 4GB of memory.
	*/
	if (found_mem64) {
	bar += 4;
	pci_hose_write_config_dword(hose, dev, bar, 0x00000000);
	}

	cmdstat \|= (bar_response & PCI_BASE_ADDRESS_SPACE) ?
	PCI_COMMAND_IO : PCI_COMMAND_MEMORY;
	}

	DEBUGF("\n");

	bar_nr++;
	}

	pci_hose_write_config_dword(hose, dev, PCI_COMMAND, cmdstat);
	pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08);
	pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80);
	}

	void pciauto_prescan_setup_bridge(struct pci_controller *hose,
	pci_dev_t dev, int sub_bus)
	{
	struct pci_region *pci_mem = hose->pci_mem;
	struct pci_region *pci_prefetch = hose->pci_prefetch;
	struct pci_region *pci_io = hose->pci_io;
	unsigned int cmdstat;

	pci_hose_read_config_dword(hose, dev, PCI_COMMAND, &cmdstat);

	/* Configure bus number registers */
	pci_hose_write_config_byte(hose, dev, PCI_PRIMARY_BUS,
	PCI_BUS(dev) - hose->first_busno);
	pci_hose_write_config_byte(hose, dev, PCI_SECONDARY_BUS,
	sub_bus - hose->first_busno);
	pci_hose_write_config_byte(hose, dev, PCI_SUBORDINATE_BUS, 0xff);

	if (pci_mem) {
	/* Round memory allocator to 1MB boundary */
	pciauto_region_align(pci_mem, 0x100000);

	/* Set up memory and I/O filter limits, assume 32-bit I/O space */
	pci_hose_write_config_word(hose, dev, PCI_MEMORY_BASE,
	(pci_mem->bus_lower & 0xfff00000) >> 16);

	cmdstat \|= PCI_COMMAND_MEMORY;
	}

	if (pci_prefetch) {
	/* Round memory allocator to 1MB boundary */
	pciauto_region_align(pci_prefetch, 0x100000);

	/* Set up memory and I/O filter limits, assume 32-bit I/O space */
	pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_BASE,
	(pci_prefetch->bus_lower & 0xfff00000) >> 16);

	cmdstat \|= PCI_COMMAND_MEMORY;
	} else {
	/* We don't support prefetchable memory for now, so disable */
	pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_BASE, 0x1000);
	pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_LIMIT, 0x0);
	}

	if (pci_io) {
	/* Round I/O allocator to 4KB boundary */
	pciauto_region_align(pci_io, 0x1000);

	pci_hose_write_config_byte(hose, dev, PCI_IO_BASE,
	(pci_io->bus_lower & 0x0000f000) >> 8);
	pci_hose_write_config_word(hose, dev, PCI_IO_BASE_UPPER16,
	(pci_io->bus_lower & 0xffff0000) >> 16);

	cmdstat \|= PCI_COMMAND_IO;
	}

	/* Enable memory and I/O accesses, enable bus master */
	pci_hose_write_config_dword(hose, dev, PCI_COMMAND, cmdstat \| PCI_COMMAND_MASTER);
	}

	void pciauto_postscan_setup_bridge(struct pci_controller *hose,
	pci_dev_t dev, int sub_bus)
	{
	struct pci_region *pci_mem = hose->pci_mem;
	struct pci_region *pci_prefetch = hose->pci_prefetch;
	struct pci_region *pci_io = hose->pci_io;

	/* Configure bus number registers */
	pci_hose_write_config_byte(hose, dev, PCI_SUBORDINATE_BUS,
	sub_bus - hose->first_busno);

	if (pci_mem) {
	/* Round memory allocator to 1MB boundary */
	pciauto_region_align(pci_mem, 0x100000);

	pci_hose_write_config_word(hose, dev, PCI_MEMORY_LIMIT,
	(pci_mem->bus_lower-1) >> 16);
	}

	if (pci_prefetch) {
	/* Round memory allocator to 1MB boundary */
	pciauto_region_align(pci_prefetch, 0x100000);

	pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_LIMIT,
	(pci_prefetch->bus_lower-1) >> 16);
	}

	if (pci_io) {
	/* Round I/O allocator to 4KB boundary */
	pciauto_region_align(pci_io, 0x1000);

	pci_hose_write_config_byte(hose, dev, PCI_IO_LIMIT,
	((pci_io->bus_lower-1) & 0x0000f000) >> 8);
	pci_hose_write_config_word(hose, dev, PCI_IO_LIMIT_UPPER16,
	((pci_io->bus_lower-1) & 0xffff0000) >> 16);
	}
	}

	/*
	*
	*/

	void pciauto_config_init(struct pci_controller *hose)
	{
	int i;

	hose->pci_io = hose->pci_mem = NULL;

	for (i=0; i<hose->region_count; i++) {
	switch(hose->regions[i].flags) {
	case PCI_REGION_IO:
	if (!hose->pci_io \|\|
	hose->pci_io->size < hose->regions[i].size)
	hose->pci_io = hose->regions + i;
	break;
	case PCI_REGION_MEM:
	if (!hose->pci_mem \|\|
	hose->pci_mem->size < hose->regions[i].size)
	hose->pci_mem = hose->regions + i;
	break;
	case (PCI_REGION_MEM \| PCI_REGION_PREFETCH):
	if (!hose->pci_prefetch \|\|
	hose->pci_prefetch->size < hose->regions[i].size)
	hose->pci_prefetch = hose->regions + i;
	break;
	}
	}


	if (hose->pci_mem) {
	pciauto_region_init(hose->pci_mem);

	DEBUGF("PCI Autoconfig: Bus Memory region: [%lx-%lx],\n"
	"\t\tPhysical Memory [%x-%x]\n",
	hose->pci_mem->bus_start,
	hose->pci_mem->bus_start + hose->pci_mem->size - 1,
	hose->pci_mem->phys_start,
	hose->pci_mem->phys_start + hose->pci_mem->size - 1);
	}

	if (hose->pci_prefetch) {
	pciauto_region_init(hose->pci_prefetch);

	DEBUGF("PCI Autoconfig: Bus Prefetchable Mem: [%lx-%lx],\n"
	"\t\tPhysical Memory [%x-%x]\n",
	hose->pci_prefetch->bus_start,
	hose->pci_prefetch->bus_start + hose->pci_prefetch->size - 1,
	hose->pci_prefetch->phys_start,
	hose->pci_prefetch->phys_start +
	hose->pci_prefetch->size - 1);
	}

	if (hose->pci_io) {
	pciauto_region_init(hose->pci_io);

	DEBUGF("PCI Autoconfig: Bus I/O region: [%lx-%lx],\n"
	"\t\tPhysical Memory: [%x-%x]\n",
	hose->pci_io->bus_start,
	hose->pci_io->bus_start + hose->pci_io->size - 1,
	hose->pci_io->phys_start,
	hose->pci_io->phys_start + hose->pci_io->size - 1);

	}
	}

	/* HJF: Changed this to return int. I think this is required
	* to get the correct result when scanning bridges
	*/
	int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev)
	{
	unsigned int sub_bus = PCI_BUS(dev);
	unsigned short class;
	unsigned char prg_iface;
	int n;

	pci_hose_read_config_word(hose, dev, PCI_CLASS_DEVICE, &class);

	switch(class) {
	case PCI_CLASS_PROCESSOR_POWERPC: /* an agent or end-point */
	DEBUGF("PCI AutoConfig: Found PowerPC device\n");
	pciauto_setup_device(hose, dev, 6, hose->pci_mem,
	hose->pci_prefetch, hose->pci_io);
	break;

	case PCI_CLASS_BRIDGE_PCI:
	hose->current_busno++;
	pciauto_setup_device(hose, dev, 2, hose->pci_mem, hose->pci_prefetch, hose->pci_io);

	DEBUGF("PCI Autoconfig: Found P2P bridge, device %d\n", PCI_DEV(dev));

	/* Passing in current_busno allows for sibling P2P bridges */
	pciauto_prescan_setup_bridge(hose, dev, hose->current_busno);
	/*
	* need to figure out if this is a subordinate bridge on the bus
	* to be able to properly set the pri/sec/sub bridge registers.
	*/
	n = pci_hose_scan_bus(hose, hose->current_busno);

	/* figure out the deepest we've gone for this leg */
	sub_bus = max(n, sub_bus);
	pciauto_postscan_setup_bridge(hose, dev, sub_bus);

	sub_bus = hose->current_busno;
	break;

	case PCI_CLASS_STORAGE_IDE:
	pci_hose_read_config_byte(hose, dev, PCI_CLASS_PROG, &prg_iface);
	if (!(prg_iface & PCIAUTO_IDE_MODE_MASK)) {
	DEBUGF("PCI Autoconfig: Skipping legacy mode IDE controller\n");
	return sub_bus;
	}

	pciauto_setup_device(hose, dev, 6, hose->pci_mem, hose->pci_prefetch, hose->pci_io);
	break;

	case PCI_CLASS_BRIDGE_CARDBUS:
	/* just do a minimal setup of the bridge, let the OS take care of the rest */
	pciauto_setup_device(hose, dev, 0, hose->pci_mem, hose->pci_prefetch, hose->pci_io);

	DEBUGF("PCI Autoconfig: Found P2CardBus bridge, device %d\n", PCI_DEV(dev));

	hose->current_busno++;
	break;

	#ifdef CONFIG_MPC5200
	case PCI_CLASS_BRIDGE_OTHER:
	DEBUGF("PCI Autoconfig: Skipping bridge device %d\n",
	PCI_DEV(dev));
	break;
	#endif
	#ifdef CONFIG_MPC834X
	case PCI_CLASS_BRIDGE_OTHER:
	/*
	* The host/PCI bridge 1 seems broken in 8349 - it presents
	* itself as 'PCI_CLASS_BRIDGE_OTHER' and appears as an _agent_
	* device claiming resources io/mem/irq.. we only allow for
	* the PIMMR window to be allocated (BAR0 - 1MB size)
	*/
	DEBUGF("PCI Autoconfig: Broken bridge found, only minimal config\n");
	pciauto_setup_device(hose, dev, 0, hose->pci_mem, hose->pci_prefetch, hose->pci_io);
	break;
	#endif
	default:
	pciauto_setup_device(hose, dev, 6, hose->pci_mem, hose->pci_prefetch, hose->pci_io);
	break;
	}

	return sub_bus;
	}

	#endif /* CONFIG_PCI */