| CONFIG_ARM=y |
| CONFIG_ARCH_CPU_INIT=y |
| CONFIG_ARCH_MVEBU=y |
| CONFIG_SYS_TEXT_BASE=0x00800000 |
| CONFIG_SPL_LIBCOMMON_SUPPORT=y |
| CONFIG_SPL_LIBGENERIC_SUPPORT=y |
| CONFIG_SYS_MALLOC_F_LEN=0x2000 |
| CONFIG_NR_DRAM_BANKS=2 |
| CONFIG_TARGET_DS414=y |
| CONFIG_ENV_SIZE=0x10000 |
| CONFIG_ENV_OFFSET=0x7E0000 |
| CONFIG_ENV_SECT_SIZE=0x10000 |
| CONFIG_DEFAULT_DEVICE_TREE="armada-xp-synology-ds414" |
| CONFIG_SPL_TEXT_BASE=0x40004030 |
| CONFIG_SPL_SERIAL_SUPPORT=y |
| CONFIG_SPL=y |
| CONFIG_DEBUG_UART_BASE=0xd0012000 |
| CONFIG_DEBUG_UART_CLOCK=250000000 |
| CONFIG_DEBUG_UART=y |
| CONFIG_BOOTDELAY=3 |
| CONFIG_USE_BOOTARGS=y |
| CONFIG_BOOTARGS="console=ttyS0,115200 ip=off initrd=0x8000040,8M root=/dev/md0 rw syno_hw_version=DS414r1 ihd_num=4 netif_num=2 flash_size=8 SataLedSpecial=1 HddHotplug=1" |
| # CONFIG_DISPLAY_BOARDINFO is not set |
| CONFIG_DISPLAY_BOARDINFO_LATE=y |
| CONFIG_MISC_INIT_R=y |
| CONFIG_SPL_I2C=y |
| # CONFIG_CMD_FLASH is not set |
| CONFIG_CMD_I2C=y |
| CONFIG_CMD_PCI=y |
| CONFIG_CMD_SPI=y |
| CONFIG_CMD_USB=y |
| # CONFIG_CMD_SETEXPR is not set |
| CONFIG_CMD_DHCP=y |
| CONFIG_CMD_TFTPPUT=y |
| CONFIG_CMD_MII=y |
| CONFIG_CMD_PING=y |
| CONFIG_CMD_TIME=y |
| CONFIG_CMD_EXT2=y |
| CONFIG_CMD_FAT=y |
| CONFIG_CMD_JFFS2=y |
| CONFIG_CMD_MTDPARTS=y |
| CONFIG_CMD_UBI=y |
| CONFIG_ISO_PARTITION=y |
| CONFIG_ENV_OVERWRITE=y |
| CONFIG_USE_ENV_SPI_MAX_HZ=y |
| CONFIG_ENV_SPI_MAX_HZ=50000000 |
| CONFIG_SYS_RELOC_GD_ENV_ADDR=y |
| CONFIG_SPL_OF_TRANSLATE=y |
| CONFIG_SYS_I2C_LEGACY=y |
| CONFIG_SPL_SYS_I2C_LEGACY=y |
| CONFIG_SYS_I2C_MVTWSI=y |
| # CONFIG_MMC is not set |
| CONFIG_MTD=y |
| CONFIG_SPI_FLASH_STMICRO=y |
| CONFIG_PHY_ADDR_ENABLE=y |
| CONFIG_PHY_MARVELL=y |
| CONFIG_PHY_GIGE=y |
| CONFIG_MVNETA=y |
| CONFIG_MII=y |
| CONFIG_PCI=y |
| CONFIG_PCI_MVEBU=y |
| CONFIG_DEBUG_UART_SHIFT=2 |
| CONFIG_SYS_NS16550=y |
| CONFIG_KIRKWOOD_SPI=y |
| CONFIG_USB=y |
| CONFIG_USB_XHCI_HCD=y |
| # CONFIG_USB_XHCI_MVEBU is not set |
| CONFIG_USB_XHCI_PCI=y |
| CONFIG_USB_EHCI_HCD=y |
| CONFIG_USB_STORAGE=y |