| /* |
| * (C) Copyright 2001, 2002 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| /* |
| * board/config.h - configuration options, board specific |
| */ |
| |
| #ifndef __CONFIG_H |
| #define __CONFIG_H |
| |
| /*********************************************************** |
| * High Level Configuration Options |
| * (easy to change) |
| ***********************************************************/ |
| #define CONFIG_405GP 1 /* This is a PPC405 CPU */ |
| #define CONFIG_4xx 1 /* ...member of PPC4xx family */ |
| #define CONFIG_MIP405 1 /* ...on a MIP405 board */ |
| /*********************************************************** |
| * Note that it may also be a MIP405T board which is a subset of the |
| * MIP405 |
| ***********************************************************/ |
| /*********************************************************** |
| * WARNING: |
| * CONFIG_BOOT_PCI is only used for first boot-up and should |
| * NOT be enabled for production bootloader |
| ***********************************************************/ |
| /*#define CONFIG_BOOT_PCI 1*/ |
| /*********************************************************** |
| * Clock |
| ***********************************************************/ |
| #define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */ |
| |
| |
| /* |
| * Command line configuration. |
| */ |
| #include <config_cmd_default.h> |
| |
| #define CONFIG_CMD_CACHE |
| #define CONFIG_CMD_DATE |
| #define CONFIG_CMD_DHCP |
| #define CONFIG_CMD_EEPROM |
| #define CONFIG_CMD_ELF |
| #define CONFIG_CMD_FAT |
| #define CONFIG_CMD_I2C |
| #define CONFIG_CMD_IDE |
| #define CONFIG_CMD_IRQ |
| #define CONFIG_CMD_JFFS2 |
| #define CONFIG_CMD_MII |
| #define CONFIG_CMD_PCI |
| #define CONFIG_CMD_PING |
| #define CONFIG_CMD_REGINFO |
| #define CONFIG_CMD_SAVES |
| #define CONFIG_CMD_BSP |
| |
| #if !defined(CONFIG_MIP405T) |
| #define CONFIG_CMD_USB |
| #define CONFIG_CMD_DOC |
| #endif |
| |
| |
| #define CFG_NAND_LEGACY |
| |
| #define CFG_HUSH_PARSER |
| #define CFG_PROMPT_HUSH_PS2 "> " |
| /************************************************************** |
| * I2C Stuff: |
| * the MIP405 is equiped with an Atmel 24C128/256 EEPROM at address |
| * 0x53. |
| * The Atmel EEPROM uses 16Bit addressing. |
| ***************************************************************/ |
| |
| #define CONFIG_HARD_I2C /* I2c with hardware support */ |
| #define CFG_I2C_SPEED 50000 /* I2C speed and slave address */ |
| #define CFG_I2C_SLAVE 0x7F |
| |
| #define CFG_I2C_EEPROM_ADDR 0x53 /* EEPROM 24C128/256 */ |
| #define CFG_I2C_EEPROM_ADDR_LEN 2 /* Bytes of address */ |
| /* mask of address bits that overflow into the "EEPROM chip address" */ |
| #undef CFG_I2C_EEPROM_ADDR_OVERFLOW |
| #define CFG_EEPROM_PAGE_WRITE_BITS 6 /* The Atmel 24C128/256 has */ |
| /* 64 byte page write mode using*/ |
| /* last 6 bits of the address */ |
| #define CFG_EEPROM_PAGE_WRITE_ENABLE /* enable Page write */ |
| #define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */ |
| |
| |
| #define CFG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */ |
| #define CFG_ENV_OFFSET 0x00000 /* environment starts at the beginning of the EEPROM */ |
| #define CFG_ENV_SIZE 0x00800 /* 2k bytes may be used for env vars */ |
| |
| /*************************************************************** |
| * Definitions for Serial Presence Detect EEPROM address |
| * (to get SDRAM settings) |
| ***************************************************************/ |
| /*#define SDRAM_EEPROM_WRITE_ADDRESS 0xA0 |
| #define SDRAM_EEPROM_READ_ADDRESS 0xA1 |
| */ |
| /************************************************************** |
| * Environment definitions |
| **************************************************************/ |
| #define CONFIG_BAUDRATE 9600 /* STD Baudrate */ |
| #define CONFIG_BOOTDELAY 5 |
| /* autoboot (do NOT change this set environment variable "bootdelay" to -1 instead) */ |
| /* #define CONFIG_BOOT_RETRY_TIME -10 /XXX* feature is available but not enabled */ |
| #define CONFIG_ZERO_BOOTDELAY_CHECK /* check console even if bootdelay = 0 */ |
| |
| #define CONFIG_BOOTCOMMAND "diskboot 400000 0:1; bootm" /* autoboot command */ |
| #define CONFIG_BOOTARGS "console=ttyS0,9600 root=/dev/hda5" /* boot arguments */ |
| |
| #define CONFIG_IPADDR 10.0.0.100 |
| #define CONFIG_SERVERIP 10.0.0.1 |
| #define CONFIG_PREBOOT |
| /*************************************************************** |
| * defines if the console is stored in the environment |
| ***************************************************************/ |
| #define CFG_CONSOLE_IS_IN_ENV /* stdin, stdout and stderr are in evironment */ |
| /*************************************************************** |
| * defines if an overwrite_console function exists |
| *************************************************************/ |
| #define CFG_CONSOLE_OVERWRITE_ROUTINE |
| #define CFG_CONSOLE_INFO_QUIET |
| /*************************************************************** |
| * defines if the overwrite_console should be stored in the |
| * environment |
| **************************************************************/ |
| #undef CFG_CONSOLE_ENV_OVERWRITE |
| |
| /************************************************************** |
| * loads config |
| *************************************************************/ |
| #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ |
| #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ |
| |
| #define CONFIG_MISC_INIT_R |
| /*********************************************************** |
| * Miscellaneous configurable options |
| **********************************************************/ |
| #define CFG_LONGHELP /* undef to save memory */ |
| #define CFG_PROMPT "=> " /* Monitor Command Prompt */ |
| #if defined(CONFIG_CMD_KGDB) |
| #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ |
| #else |
| #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ |
| #endif |
| #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ |
| #define CFG_MAXARGS 16 /* max number of command args */ |
| #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ |
| |
| #define CFG_MEMTEST_START 0x0100000 /* memtest works on */ |
| #define CFG_MEMTEST_END 0x0C00000 /* 1 ... 12 MB in DRAM */ |
| |
| #undef CFG_EXT_SERIAL_CLOCK /* no external serial clock used */ |
| #define CFG_BASE_BAUD 916667 |
| |
| /* The following table includes the supported baudrates */ |
| #define CFG_BAUDRATE_TABLE \ |
| { 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, \ |
| 57600, 115200, 230400, 460800, 921600 } |
| |
| #define CFG_LOAD_ADDR 0x400000 /* default load address */ |
| #define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */ |
| |
| #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ |
| |
| /*----------------------------------------------------------------------- |
| * PCI stuff |
| *----------------------------------------------------------------------- |
| */ |
| #define PCI_HOST_ADAPTER 0 /* configure as pci adapter */ |
| #define PCI_HOST_FORCE 1 /* configure as pci host */ |
| #define PCI_HOST_AUTO 2 /* detected via arbiter enable */ |
| |
| #define CONFIG_PCI /* include pci support */ |
| #define CONFIG_PCI_HOST PCI_HOST_FORCE /* configure as pci-host */ |
| #define CONFIG_PCI_PNP /* pci plug-and-play */ |
| /* resource configuration */ |
| #define CFG_PCI_SUBSYS_VENDORID 0x0000 /* PCI Vendor ID: to-do!!! */ |
| #define CFG_PCI_SUBSYS_DEVICEID 0x0000 /* PCI Device ID: to-do!!! */ |
| #define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */ |
| #define CFG_PCI_PTM1MS 0x80000001 /* 2GB, enable hard-wired to 1 */ |
| #define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */ |
| #define CFG_PCI_PTM2LA 0x00000000 /* disabled */ |
| #define CFG_PCI_PTM2MS 0x00000000 /* disabled */ |
| #define CFG_PCI_PTM2PCI 0x00000000 /* Host: use this pci address */ |
| |
| /*----------------------------------------------------------------------- |
| * Start addresses for the final memory configuration |
| * (Set up by the startup code) |
| * Please note that CFG_SDRAM_BASE _must_ start at 0 |
| */ |
| #define CFG_SDRAM_BASE 0x00000000 |
| #define CFG_FLASH_BASE 0xFFF80000 |
| #define CFG_MONITOR_BASE CFG_FLASH_BASE |
| #define CFG_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Monitor */ |
| #define CFG_MALLOC_LEN (1024 * 1024) /* Reserve 1024 kB for malloc() */ |
| |
| /* |
| * For booting Linux, the board info and command line data |
| * have to be in the first 8 MB of memory, since this is |
| * the maximum mapped by the Linux kernel during initialization. |
| */ |
| #define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ |
| /*----------------------------------------------------------------------- |
| * FLASH organization |
| */ |
| #define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ |
| #define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ |
| |
| #define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ |
| #define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ |
| |
| /* |
| * JFFS2 partitions |
| * |
| */ |
| /* No command line, one static partition, whole device */ |
| #undef CONFIG_JFFS2_CMDLINE |
| #define CONFIG_JFFS2_DEV "nor0" |
| #define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF |
| #define CONFIG_JFFS2_PART_OFFSET 0x00000000 |
| |
| /* mtdparts command line support */ |
| /* Note: fake mtd_id used, no linux mtd map file */ |
| /* |
| #define CONFIG_JFFS2_CMDLINE |
| #define MTDIDS_DEFAULT "nor0=mip405-0" |
| #define MTDPARTS_DEFAULT "mtdparts=mip405-0:-(jffs2)" |
| */ |
| |
| /*----------------------------------------------------------------------- |
| * Cache Configuration |
| */ |
| #define CFG_DCACHE_SIZE 0x4000 /* For AMCC 405GPr CPUs */ |
| #define CFG_CACHELINE_SIZE 32 /* ... */ |
| #if defined(CONFIG_CMD_KGDB) |
| #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ |
| #endif |
| |
| /*----------------------------------------------------------------------- |
| * Logbuffer Configuration |
| */ |
| #undef CONFIG_LOGBUFFER /* supported but not enabled */ |
| /*----------------------------------------------------------------------- |
| * Bootcountlimit Configuration |
| */ |
| #undef CONFIG_BOOTCOUNT_LIMIT /* supported but not enabled */ |
| |
| /*----------------------------------------------------------------------- |
| * POST Configuration |
| */ |
| #if 0 /* enable this if POST is desired (is supported but not enabled) */ |
| #define CONFIG_POST (CFG_POST_MEMORY | \ |
| CFG_POST_CPU | \ |
| CFG_POST_RTC | \ |
| CFG_POST_I2C) |
| |
| #endif |
| /* |
| * Init Memory Controller: |
| */ |
| #define FLASH_MAX_SIZE 0x00800000 /* 8MByte max */ |
| #define FLASH_BASE_PRELIM 0xFF800000 /* open the flash CS */ |
| /* Size: 0=1MB, 1=2MB, 2=4MB, 3=8MB, 4=16MB, 5=32MB, 6=64MB, 7=128MB */ |
| #define FLASH_SIZE_PRELIM 3 /* maximal flash FLASH size bank #0 */ |
| |
| #define CONFIG_BOARD_EARLY_INIT_F 1 |
| |
| /* Peripheral Bus Mapping */ |
| #define PER_PLD_ADDR 0xF4000000 /* smallest window is 1MByte 0x10 0000*/ |
| #define PER_UART0_ADDR 0xF4100000 /* smallest window is 1MByte 0x10 0000*/ |
| #define PER_UART1_ADDR 0xF4200000 /* smallest window is 1MByte 0x10 0000*/ |
| |
| #define MULTI_PURPOSE_SOCKET_ADDR 0xF8000000 |
| #define CONFIG_PORT_ADDR PER_PLD_ADDR + 5 |
| |
| |
| /*----------------------------------------------------------------------- |
| * Definitions for initial stack pointer and data area (in On Chip SRAM) |
| */ |
| #define CFG_TEMP_STACK_OCM 1 |
| #define CFG_OCM_DATA_ADDR 0xF0000000 |
| #define CFG_OCM_DATA_SIZE 0x1000 |
| #define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR /* inside of On Chip SRAM */ |
| #define CFG_INIT_RAM_END CFG_OCM_DATA_SIZE /* End of On Chip SRAM */ |
| #define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ |
| #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) |
| /* reserve some memory for POST and BOOT limit info */ |
| #define CFG_INIT_SP_OFFSET (CFG_GBL_DATA_OFFSET - 32) |
| |
| #ifdef CONFIG_POST /* reserve one word for POST Info */ |
| #define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 4) |
| #endif |
| |
| #ifdef CONFIG_BOOTCOUNT_LIMIT /* reserve 2 word for bootcount limit */ |
| #define CFG_BOOTCOUNT_ADDR (CFG_GBL_DATA_OFFSET - 12) |
| #endif |
| |
| /* |
| * Internal Definitions |
| * |
| * Boot Flags |
| */ |
| #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ |
| #define BOOTFLAG_WARM 0x02 /* Software reboot */ |
| |
| |
| /*********************************************************************** |
| * External peripheral base address |
| ***********************************************************************/ |
| #define CFG_ISA_IO_BASE_ADDRESS 0xE8000000 |
| |
| /*********************************************************************** |
| * Last Stage Init |
| ***********************************************************************/ |
| #define CONFIG_LAST_STAGE_INIT |
| /************************************************************ |
| * Ethernet Stuff |
| ***********************************************************/ |
| #define CONFIG_MII 1 /* MII PHY management */ |
| #define CONFIG_PHY_ADDR 1 /* PHY address */ |
| #define CONFIG_PHY_RESET_DELAY 300 /* Intel LXT971A needs this */ |
| #define CONFIG_PHY_CMD_DELAY 40 /* Intel LXT971A needs this */ |
| /************************************************************ |
| * RTC |
| ***********************************************************/ |
| #define CONFIG_RTC_MC146818 |
| #undef CONFIG_WATCHDOG /* watchdog disabled */ |
| |
| /************************************************************ |
| * IDE/ATA stuff |
| ************************************************************/ |
| #if defined(CONFIG_MIP405T) |
| #define CFG_IDE_MAXBUS 1 /* MIP405T has only one IDE bus */ |
| #else |
| #define CFG_IDE_MAXBUS 2 /* max. 2 IDE busses */ |
| #endif |
| |
| #define CFG_IDE_MAXDEVICE (CFG_IDE_MAXBUS*2) /* max. 2 drives per IDE bus */ |
| |
| #define CFG_ATA_BASE_ADDR CFG_ISA_IO_BASE_ADDRESS /* base address */ |
| #define CFG_ATA_IDE0_OFFSET 0x01F0 /* ide0 offste */ |
| #define CFG_ATA_IDE1_OFFSET 0x0170 /* ide1 offset */ |
| #define CFG_ATA_DATA_OFFSET 0 /* data reg offset */ |
| #define CFG_ATA_REG_OFFSET 0 /* reg offset */ |
| #define CFG_ATA_ALT_OFFSET 0x200 /* alternate register offset */ |
| |
| #undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */ |
| #undef CONFIG_IDE_LED /* no led for ide supported */ |
| #define CONFIG_IDE_RESET /* reset for ide supported... */ |
| #define CONFIG_IDE_RESET_ROUTINE /* with a special reset function */ |
| #define CONFIG_SUPPORT_VFAT |
| /************************************************************ |
| * ATAPI support (experimental) |
| ************************************************************/ |
| #define CONFIG_ATAPI /* enable ATAPI Support */ |
| |
| /************************************************************ |
| * DISK Partition support |
| ************************************************************/ |
| #define CONFIG_DOS_PARTITION |
| #define CONFIG_MAC_PARTITION |
| #define CONFIG_ISO_PARTITION /* Experimental */ |
| |
| /************************************************************ |
| * Disk-On-Chip configuration |
| ************************************************************/ |
| #define CFG_MAX_DOC_DEVICE 1 /* Max number of DOC devices */ |
| #define CFG_DOC_SHORT_TIMEOUT |
| #define CFG_DOC_SUPPORT_2000 |
| #define CFG_DOC_SUPPORT_MILLENNIUM |
| /************************************************************ |
| * Keyboard support |
| ************************************************************/ |
| #undef CONFIG_ISA_KEYBOARD |
| |
| /************************************************************ |
| * Video support |
| ************************************************************/ |
| #define CONFIG_VIDEO /*To enable video controller support */ |
| #define CONFIG_VIDEO_CT69000 |
| #define CONFIG_CFB_CONSOLE |
| #define CONFIG_VIDEO_LOGO |
| #define CONFIG_CONSOLE_EXTRA_INFO |
| #define CONFIG_VGA_AS_SINGLE_DEVICE |
| #define CONFIG_VIDEO_SW_CURSOR |
| #undef CONFIG_VIDEO_ONBOARD |
| /************************************************************ |
| * USB support EXPERIMENTAL |
| ************************************************************/ |
| #if !defined(CONFIG_MIP405T) |
| #define CONFIG_USB_UHCI |
| #define CONFIG_USB_KEYBOARD |
| #define CONFIG_USB_STORAGE |
| |
| /* Enable needed helper functions */ |
| #define CFG_DEVICE_DEREGISTER /* needs device_deregister */ |
| #endif |
| /************************************************************ |
| * Debug support |
| ************************************************************/ |
| #if defined(CONFIG_CMD_KGDB) |
| #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ |
| #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ |
| #endif |
| |
| /************************************************************ |
| * support BZIP2 compression |
| ************************************************************/ |
| #define CONFIG_BZIP2 1 |
| |
| /************************************************************ |
| * Ident |
| ************************************************************/ |
| |
| #define VERSION_TAG "released" |
| #if !defined(CONFIG_MIP405T) |
| #define CONFIG_ISO_STRING "MEV-10072-001" |
| #else |
| #define CONFIG_ISO_STRING "MEV-10082-001" |
| #endif |
| |
| #if !defined(CONFIG_BOOT_PCI) |
| #define CONFIG_IDENT_STRING "\n(c) 2003 by MPL AG Switzerland, " CONFIG_ISO_STRING " " VERSION_TAG |
| #else |
| #define CONFIG_IDENT_STRING "\n(c) 2003 by MPL AG Switzerland, PCI_BOOT Version" |
| #endif |
| |
| |
| #endif /* __CONFIG_H */ |