include/configs/novena.h - filogic/uboot - Gitiles

 /*
  * Configuration settings for the Novena U-Boot.
  *
  * Copyright (C) 2014 Marek Vasut <marex@denx.de>
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */

 #ifndef __CONFIG_H
 #define __CONFIG_H

 /* System configurations */
 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_BOARD_LATE_INIT
 #define CONFIG_MISC_INIT_R
 #define CONFIG_KEYBOARD

 #include <config_distro_defaults.h>
 #include "mx6_common.h"

 /* U-Boot Commands */
 #define CONFIG_CMD_BMODE
 #define CONFIG_CMD_EEPROM
 #define CONFIG_FAT_WRITE
 #define CONFIG_CMD_PCI
 #define CONFIG_CMD_SATA
 #define CONFIG_VIDEO

 /* U-Boot general configurations */

 /* U-Boot environment */
 #define CONFIG_ENV_SIZE			(16 * 1024)
 /*
  * Environment is on MMC, starting at offset 512KiB from start of the card.
  * Please place first partition at offset 1MiB from the start of the card
  * as recommended by GNU/fdisk. See below for details:
  * http://homepage.ntlworld.com./jonathan.deboynepollard/FGA/disc-partition-alignment.html
  */
 #ifdef CONFIG_CMD_MMC
 #define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_SYS_MMC_ENV_DEV		0
 #define CONFIG_ENV_OFFSET		(512 * 1024)
 #define CONFIG_ENV_SIZE_REDUND		CONFIG_ENV_SIZE
 #define CONFIG_ENV_OFFSET_REDUND	\
 		(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
 #else
 #define CONFIG_ENV_IS_NOWHERE
 #endif

 /* Booting Linux */
 #define CONFIG_BOOTFILE			"fitImage"
 #define CONFIG_BOOTARGS			"console=ttymxc1,115200 "
 #define CONFIG_BOOTCOMMAND		"run distro_bootcmd ; run net_nfs"
 #define CONFIG_HOSTNAME			novena

 /* Physical Memory Map */
 #define CONFIG_NR_DRAM_BANKS		1
 #define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR

 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
 #define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
 #define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE

 #define CONFIG_SYS_INIT_SP_OFFSET \
 	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_ADDR \
 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

 #define CONFIG_SYS_MEMTEST_START	0x10000000
 #define CONFIG_SYS_MEMTEST_END		0x20000000

 #define CONFIG_SYS_MALLOC_LEN		(64 * 1024 * 1024)

 /* SPL */
 #define CONFIG_SPL_FAT_SUPPORT
 #define CONFIG_SPL_MMC_SUPPORT
 #include "imx6_spl.h"			/* common IMX6 SPL configuration */

 /* Ethernet Configuration */
 #ifdef CONFIG_CMD_NET
 #define CONFIG_FEC_MXC
 #define CONFIG_MII
 #define IMX_FEC_BASE			ENET_BASE_ADDR
 #define CONFIG_FEC_XCV_TYPE		RGMII
 #define CONFIG_ETHPRIME			"FEC"
 #define CONFIG_FEC_MXC_PHYADDR		0x7
 #define CONFIG_PHYLIB
 #define CONFIG_PHY_MICREL
 #define CONFIG_PHY_MICREL_KSZ9021
 #define CONFIG_ARP_TIMEOUT		200UL
 #endif

 /* I2C */
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
 #define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
 #define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
 #define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
 #define CONFIG_I2C_MULTI_BUS
 #define CONFIG_I2C_MXC
 #define CONFIG_SYS_I2C_SPEED		100000
 #define CONFIG_SYS_SPD_BUS_NUM		0

 /* I2C EEPROM */
 #ifdef CONFIG_CMD_EEPROM
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2
 #define CONFIG_SYS_I2C_EEPROM_BUS	2
 #endif

 /* MMC Configs */
 #define CONFIG_SYS_FSL_ESDHC_ADDR	0
 #define CONFIG_SYS_FSL_USDHC_NUM	2

 /* PCI express */
 #ifdef CONFIG_CMD_PCI
 #define CONFIG_PCI
 #define CONFIG_PCI_PNP
 #define CONFIG_PCI_SCAN_SHOW
 #define CONFIG_PCIE_IMX
 #define CONFIG_PCIE_IMX_PERST_GPIO	IMX_GPIO_NR(3, 29)
 #define CONFIG_PCIE_IMX_POWER_GPIO	IMX_GPIO_NR(7, 12)
 #endif

 /* PMIC */
 #define CONFIG_POWER
 #define CONFIG_POWER_I2C
 #define CONFIG_POWER_PFUZE100
 #define CONFIG_POWER_PFUZE100_I2C_ADDR	0x08

 /* SATA Configs */
 #ifdef CONFIG_CMD_SATA
 #define CONFIG_DWC_AHSATA
 #define CONFIG_SYS_SATA_MAX_DEVICE	1
 #define CONFIG_DWC_AHSATA_PORT_ID	0
 #define CONFIG_DWC_AHSATA_BASE_ADDR	SATA_ARB_BASE_ADDR
 #define CONFIG_LBA48
 #define CONFIG_LIBATA
 #endif

 /* UART */
 #define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE		UART2_BASE

 /* USB Configs */
 #ifdef CONFIG_CMD_USB
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_MX6
 #define CONFIG_USB_KEYBOARD
 #define CONFIG_SYS_STDIO_DEREGISTER
 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
 #define CONFIG_USB_HOST_ETHER
 #define CONFIG_USB_ETHER_ASIX
 #define CONFIG_USB_ETHER_SMSC95XX
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 #define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS		0
 /* Gadget part */
 #define CONFIG_USBD_HS
 #define CONFIG_USB_ETHER
 #define CONFIG_USB_ETH_CDC
 #define CONFIG_NETCONSOLE
 #endif

 /* Video output */
 #ifdef CONFIG_VIDEO
 #define CONFIG_VIDEO_IPUV3
 #define CONFIG_CFB_CONSOLE
 #define CONFIG_VGA_AS_SINGLE_DEVICE
 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 #define CONFIG_VIDEO_BMP_RLE8
 #define CONFIG_SPLASH_SCREEN
 #define CONFIG_BMP_16BPP
 #define CONFIG_VIDEO_LOGO
 #define CONFIG_IPUV3_CLK		260000000
 #define CONFIG_CMD_HDMIDETECT
 #define CONFIG_CONSOLE_MUX
 #define CONFIG_IMX_HDMI
 #define CONFIG_IMX_VIDEO_SKIP
 #endif

 /* Extra U-Boot environment. */
 #ifndef CONFIG_SPL_BUILD
 #define CONFIG_EXTRA_ENV_SETTINGS					\
 	"fdt_high=0xffffffff\0"						\
 	"initrd_high=0xffffffff\0"					\
 	"consdev=ttymxc1\0"						\
 	"baudrate=115200\0"						\
 	"bootdev=/dev/mmcblk0p1\0"					\
 	"rootdev=/dev/mmcblk0p2\0"					\
 	"netdev=eth0\0"							\
 	"kernel_addr_r="__stringify(CONFIG_LOADADDR)"\0"		\
 	"pxefile_addr_r="__stringify(CONFIG_LOADADDR)"\0"		\
 	"scriptaddr="__stringify(CONFIG_LOADADDR)"\0"			\
 	"ramdisk_addr_r=0x28000000\0"		   			\
 	"fdt_addr_r=0x18000000\0"					\
 	"fdtfile=imx6q-novena.dtb\0"					\
 	"addcons="							\
 		"setenv bootargs ${bootargs} "				\
 		"console=${consdev},${baudrate}\0"			\
 	"addip="							\
 		"setenv bootargs ${bootargs} "				\
 		"ip=${ipaddr}:${serverip}:${gatewayip}:"		\
 			"${netmask}:${hostname}:${netdev}:off\0"	\
 	"addmisc="							\
 		"setenv bootargs ${bootargs} ${miscargs}\0"		\
 	"addargs=run addcons addmisc\0"					\
 	"mmcload="							\
 		"mmc rescan ; "						\
 		"ext4load mmc 0:1 ${kernel_addr_r} ${bootfile}\0"	\
 	"netload="							\
 		"tftp ${kernel_addr_r} ${hostname}/${bootfile}\0"	\
 	"miscargs=nohlt panic=1\0"					\
 	"mmcargs=setenv bootargs root=${rootdev} rw rootwait\0"		\
 	"nfsargs="							\
 		"setenv bootargs root=/dev/nfs rw "			\
 			"nfsroot=${serverip}:${rootpath},v3,tcp\0"	\
 	"mmc_mmc="							\
 		"run mmcload mmcargs addargs ; "			\
 		"bootm ${kernel_addr_r}\0"				\
 	"mmc_nfs="							\
 		"run mmcload nfsargs addip addargs ; "			\
 		"bootm ${kernel_addr_r}\0"				\
 	"net_mmc="							\
 		"run netload mmcargs addargs ; "			\
 		"bootm ${kernel_addr_r}\0"				\
 	"net_nfs="							\
 		"run netload nfsargs addip addargs ; "			\
 		"bootm ${kernel_addr_r}\0"				\
 	"update_sd_spl_filename=SPL\0"					\
 	"update_sd_uboot_filename=u-boot.img\0"				\
 	"update_sd_firmware="	/* Update the SD firmware partition */	\
 		"if mmc rescan ; then "					\
 		"if dhcp ${update_sd_spl_filename} ; then "		\
 		"mmc write ${loadaddr} 2 0x200 ; "			\
 		"fi ; "							\
 		"if dhcp ${update_sd_uboot_filename} ; then "		\
 		"fatwrite mmc 0:1 ${loadaddr} u-boot.img ${filesize} ; "\
 		"fi ; "							\
 		"fi\0"							\
 	BOOTENV

 #define BOOT_TARGET_DEVICES(func) \
 	func(MMC, mmc, 0) \
 	func(USB, usb, 0) \
 	func(SATA, sata, 0) \
 	func(PXE, pxe, na) \
 	func(DHCP, dhcp, na)

 #include <config_distro_bootcmd.h>

 #else
 #define CONFIG_EXTRA_ENV_SETTINGS
 #endif /* CONFIG_SPL_BUILD */

 #endif				/* __CONFIG_H */
	/*
	* Configuration settings for the Novena U-Boot.
	*
	* Copyright (C) 2014 Marek Vasut <marex@denx.de>
	*
	* SPDX-License-Identifier: GPL-2.0+
	*/

	#ifndef __CONFIG_H
	#define __CONFIG_H

	/* System configurations */
	#define CONFIG_BOARD_EARLY_INIT_F
	#define CONFIG_BOARD_LATE_INIT
	#define CONFIG_MISC_INIT_R
	#define CONFIG_KEYBOARD

	#include <config_distro_defaults.h>
	#include "mx6_common.h"

	/* U-Boot Commands */
	#define CONFIG_CMD_BMODE
	#define CONFIG_CMD_EEPROM
	#define CONFIG_FAT_WRITE
	#define CONFIG_CMD_PCI
	#define CONFIG_CMD_SATA
	#define CONFIG_VIDEO

	/* U-Boot general configurations */

	/* U-Boot environment */
	#define CONFIG_ENV_SIZE (16 * 1024)
	/*
	* Environment is on MMC, starting at offset 512KiB from start of the card.
	* Please place first partition at offset 1MiB from the start of the card
	* as recommended by GNU/fdisk. See below for details:
	* http://homepage.ntlworld.com./jonathan.deboynepollard/FGA/disc-partition-alignment.html
	*/
	#ifdef CONFIG_CMD_MMC
	#define CONFIG_ENV_IS_IN_MMC
	#define CONFIG_SYS_MMC_ENV_DEV 0
	#define CONFIG_ENV_OFFSET (512 * 1024)
	#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
	#define CONFIG_ENV_OFFSET_REDUND \
	(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
	#else
	#define CONFIG_ENV_IS_NOWHERE
	#endif

	/* Booting Linux */
	#define CONFIG_BOOTFILE "fitImage"
	#define CONFIG_BOOTARGS "console=ttymxc1,115200 "
	#define CONFIG_BOOTCOMMAND "run distro_bootcmd ; run net_nfs"
	#define CONFIG_HOSTNAME novena

	/* Physical Memory Map */
	#define CONFIG_NR_DRAM_BANKS 1
	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR

	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE

	#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

	#define CONFIG_SYS_MEMTEST_START 0x10000000
	#define CONFIG_SYS_MEMTEST_END 0x20000000

	#define CONFIG_SYS_MALLOC_LEN (64 * 1024 * 1024)

	/* SPL */
	#define CONFIG_SPL_FAT_SUPPORT
	#define CONFIG_SPL_MMC_SUPPORT
	#include "imx6_spl.h" /* common IMX6 SPL configuration */

	/* Ethernet Configuration */
	#ifdef CONFIG_CMD_NET
	#define CONFIG_FEC_MXC
	#define CONFIG_MII
	#define IMX_FEC_BASE ENET_BASE_ADDR
	#define CONFIG_FEC_XCV_TYPE RGMII
	#define CONFIG_ETHPRIME "FEC"
	#define CONFIG_FEC_MXC_PHYADDR 0x7
	#define CONFIG_PHYLIB
	#define CONFIG_PHY_MICREL
	#define CONFIG_PHY_MICREL_KSZ9021
	#define CONFIG_ARP_TIMEOUT 200UL
	#endif

	/* I2C */
	#define CONFIG_SYS_I2C
	#define CONFIG_SYS_I2C_MXC
	#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
	#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
	#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
	#define CONFIG_I2C_MULTI_BUS
	#define CONFIG_I2C_MXC
	#define CONFIG_SYS_I2C_SPEED 100000
	#define CONFIG_SYS_SPD_BUS_NUM 0

	/* I2C EEPROM */
	#ifdef CONFIG_CMD_EEPROM
	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
	#define CONFIG_SYS_I2C_EEPROM_BUS 2
	#endif

	/* MMC Configs */
	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
	#define CONFIG_SYS_FSL_USDHC_NUM 2

	/* PCI express */
	#ifdef CONFIG_CMD_PCI
	#define CONFIG_PCI
	#define CONFIG_PCI_PNP
	#define CONFIG_PCI_SCAN_SHOW
	#define CONFIG_PCIE_IMX
	#define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(3, 29)
	#define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(7, 12)
	#endif

	/* PMIC */
	#define CONFIG_POWER
	#define CONFIG_POWER_I2C
	#define CONFIG_POWER_PFUZE100
	#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08

	/* SATA Configs */
	#ifdef CONFIG_CMD_SATA
	#define CONFIG_DWC_AHSATA
	#define CONFIG_SYS_SATA_MAX_DEVICE 1
	#define CONFIG_DWC_AHSATA_PORT_ID 0
	#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
	#define CONFIG_LBA48
	#define CONFIG_LIBATA
	#endif

	/* UART */
	#define CONFIG_MXC_UART
	#define CONFIG_MXC_UART_BASE UART2_BASE

	/* USB Configs */
	#ifdef CONFIG_CMD_USB
	#define CONFIG_USB_EHCI
	#define CONFIG_USB_EHCI_MX6
	#define CONFIG_USB_KEYBOARD
	#define CONFIG_SYS_STDIO_DEREGISTER
	#define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
	#define CONFIG_USB_HOST_ETHER
	#define CONFIG_USB_ETHER_ASIX
	#define CONFIG_USB_ETHER_SMSC95XX
	#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
	#define CONFIG_MXC_USB_FLAGS 0
	/* Gadget part */
	#define CONFIG_USBD_HS
	#define CONFIG_USB_ETHER
	#define CONFIG_USB_ETH_CDC
	#define CONFIG_NETCONSOLE
	#endif

	/* Video output */
	#ifdef CONFIG_VIDEO
	#define CONFIG_VIDEO_IPUV3
	#define CONFIG_CFB_CONSOLE
	#define CONFIG_VGA_AS_SINGLE_DEVICE
	#define CONFIG_SYS_CONSOLE_IS_IN_ENV
	#define CONFIG_VIDEO_BMP_RLE8
	#define CONFIG_SPLASH_SCREEN
	#define CONFIG_BMP_16BPP
	#define CONFIG_VIDEO_LOGO
	#define CONFIG_IPUV3_CLK 260000000
	#define CONFIG_CMD_HDMIDETECT
	#define CONFIG_CONSOLE_MUX
	#define CONFIG_IMX_HDMI
	#define CONFIG_IMX_VIDEO_SKIP
	#endif

	/* Extra U-Boot environment. */
	#ifndef CONFIG_SPL_BUILD
	#define CONFIG_EXTRA_ENV_SETTINGS \
	"fdt_high=0xffffffff\0" \
	"initrd_high=0xffffffff\0" \
	"consdev=ttymxc1\0" \
	"baudrate=115200\0" \
	"bootdev=/dev/mmcblk0p1\0" \
	"rootdev=/dev/mmcblk0p2\0" \
	"netdev=eth0\0" \
	"kernel_addr_r="__stringify(CONFIG_LOADADDR)"\0" \
	"pxefile_addr_r="__stringify(CONFIG_LOADADDR)"\0" \
	"scriptaddr="__stringify(CONFIG_LOADADDR)"\0" \
	"ramdisk_addr_r=0x28000000\0" \
	"fdt_addr_r=0x18000000\0" \
	"fdtfile=imx6q-novena.dtb\0" \
	"addcons=" \
	"setenv bootargs ${bootargs} " \
	"console=${consdev},${baudrate}\0" \
	"addip=" \
	"setenv bootargs ${bootargs} " \
	"ip=${ipaddr}:${serverip}:${gatewayip}:" \
	"${netmask}:${hostname}:${netdev}:off\0" \
	"addmisc=" \
	"setenv bootargs ${bootargs} ${miscargs}\0" \
	"addargs=run addcons addmisc\0" \
	"mmcload=" \
	"mmc rescan ; " \
	"ext4load mmc 0:1 ${kernel_addr_r} ${bootfile}\0" \
	"netload=" \
	"tftp ${kernel_addr_r} ${hostname}/${bootfile}\0" \
	"miscargs=nohlt panic=1\0" \
	"mmcargs=setenv bootargs root=${rootdev} rw rootwait\0" \
	"nfsargs=" \
	"setenv bootargs root=/dev/nfs rw " \
	"nfsroot=${serverip}:${rootpath},v3,tcp\0" \
	"mmc_mmc=" \
	"run mmcload mmcargs addargs ; " \
	"bootm ${kernel_addr_r}\0" \
	"mmc_nfs=" \
	"run mmcload nfsargs addip addargs ; " \
	"bootm ${kernel_addr_r}\0" \
	"net_mmc=" \
	"run netload mmcargs addargs ; " \
	"bootm ${kernel_addr_r}\0" \
	"net_nfs=" \
	"run netload nfsargs addip addargs ; " \
	"bootm ${kernel_addr_r}\0" \
	"update_sd_spl_filename=SPL\0" \
	"update_sd_uboot_filename=u-boot.img\0" \
	"update_sd_firmware=" /* Update the SD firmware partition */ \
	"if mmc rescan ; then " \
	"if dhcp ${update_sd_spl_filename} ; then " \
	"mmc write ${loadaddr} 2 0x200 ; " \
	"fi ; " \
	"if dhcp ${update_sd_uboot_filename} ; then " \
	"fatwrite mmc 0:1 ${loadaddr} u-boot.img ${filesize} ; "\
	"fi ; " \
	"fi\0" \
	BOOTENV

	#define BOOT_TARGET_DEVICES(func) \
	func(MMC, mmc, 0) \
	func(USB, usb, 0) \
	func(SATA, sata, 0) \
	func(PXE, pxe, na) \
	func(DHCP, dhcp, na)

	#include <config_distro_bootcmd.h>

	#else
	#define CONFIG_EXTRA_ENV_SETTINGS
	#endif /* CONFIG_SPL_BUILD */

	#endif /* __CONFIG_H */