// SPDX-License-Identifier: (GPL-2.0+ OR MIT) | |
/* | |
* Copyright (c) 2018 Microsemi Corporation | |
*/ | |
/dts-v1/; | |
#include "mscc,jr2.dtsi" | |
#include <dt-bindings/mscc/jr2_data.h> | |
/ { | |
model = "Serval2 NID PCB112 Reference Board"; | |
compatible = "mscc,serval2-pcb110", "mscc,jr2"; | |
aliases { | |
spi0 = &spi0; | |
serial0 = &uart0; | |
}; | |
chosen { | |
stdout-path = "serial0:115200n8"; | |
}; | |
gpio-leds { | |
compatible = "gpio-leds"; | |
status_green { | |
label = "pcb110:green:status"; | |
gpios = <&gpio 12 0>; | |
default-state = "on"; | |
}; | |
status_red { | |
label = "pcb110:red:status"; | |
gpios = <&gpio 13 0>; | |
default-state = "off"; | |
}; | |
}; | |
}; | |
&uart0 { | |
status = "okay"; | |
}; | |
&spi0 { | |
status = "okay"; | |
spi-flash@0 { | |
compatible = "jedec,spi-nor"; | |
spi-max-frequency = <18000000>; /* input clock */ | |
reg = <0>; /* CS0 */ | |
}; | |
}; | |
&sgpio { | |
status = "okay"; | |
sgpio-ports = <0x0000ffff>; | |
}; | |
&sgpio2 { | |
status = "okay"; | |
sgpio-ports = <0x3fe0ffff>; | |
}; | |
&mdio0 { | |
status = "okay"; | |
phy16: ethernet-phy@16 { | |
reg = <16>; | |
}; | |
phy17: ethernet-phy@17 { | |
reg = <17>; | |
}; | |
phy18: ethernet-phy@18 { | |
reg = <18>; | |
}; | |
phy19: ethernet-phy@19 { | |
reg = <19>; | |
}; | |
}; | |
&switch { | |
ethernet-ports { | |
port0: port@0 { | |
reg = <24>; | |
phy-handle = <&phy16>; | |
phys = <&serdes_hsio 24 SERDES6G(0) PHY_MODE_SGMII>; | |
}; | |
port1: port@1 { | |
reg = <25>; | |
phy-handle = <&phy17>; | |
phys = <&serdes_hsio 25 SERDES6G(1) PHY_MODE_SGMII>; | |
}; | |
port2: port@2 { | |
reg = <26>; | |
phy-handle = <&phy18>; | |
phys = <&serdes_hsio 26 SERDES6G(2) PHY_MODE_SGMII>; | |
}; | |
port3: port@3 { | |
reg = <27>; | |
phy-handle = <&phy19>; | |
phys = <&serdes_hsio 27 SERDES6G(3) PHY_MODE_SGMII>; | |
}; | |
}; | |
}; |