| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2019 Rockchip Electronics Co., Ltd |
| */ |
| #include <common.h> |
| #include <dm.h> |
| #include <syscon.h> |
| #include <asm/io.h> |
| #include <asm/arch-rockchip/bootrom.h> |
| #include <asm/arch-rockchip/clock.h> |
| #include <asm/arch-rockchip/grf_rk3188.h> |
| #include <asm/arch-rockchip/hardware.h> |
| |
| #define GRF_BASE 0x20008000 |
| |
| const char * const boot_devices[BROM_LAST_BOOTSOURCE + 1] = { |
| [BROM_BOOTSOURCE_EMMC] = "/dwmmc@1021c000", |
| [BROM_BOOTSOURCE_SD] = "/dwmmc@10214000", |
| }; |
| |
| #ifdef CONFIG_DEBUG_UART_BOARD_INIT |
| void board_debug_uart_init(void) |
| { |
| /* Enable early UART on the RK3188 */ |
| struct rk3188_grf * const grf = (void *)GRF_BASE; |
| enum { |
| GPIO1B1_SHIFT = 2, |
| GPIO1B1_MASK = 3, |
| GPIO1B1_GPIO = 0, |
| GPIO1B1_UART2_SOUT, |
| GPIO1B1_JTAG_TDO, |
| |
| GPIO1B0_SHIFT = 0, |
| GPIO1B0_MASK = 3, |
| GPIO1B0_GPIO = 0, |
| GPIO1B0_UART2_SIN, |
| GPIO1B0_JTAG_TDI, |
| }; |
| |
| rk_clrsetreg(&grf->gpio1b_iomux, |
| GPIO1B1_MASK << GPIO1B1_SHIFT | |
| GPIO1B0_MASK << GPIO1B0_SHIFT, |
| GPIO1B1_UART2_SOUT << GPIO1B1_SHIFT | |
| GPIO1B0_UART2_SIN << GPIO1B0_SHIFT); |
| } |
| #endif |
| |
| #ifdef CONFIG_SPL_BUILD |
| int arch_cpu_init(void) |
| { |
| struct rk3188_grf *grf; |
| |
| grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF); |
| if (IS_ERR(grf)) { |
| pr_err("grf syscon returned %ld\n", PTR_ERR(grf)); |
| return 0; |
| } |
| #ifdef CONFIG_ROCKCHIP_USB_UART |
| rk_clrsetreg(&grf->uoc0_con[0], |
| SIDDQ_MASK | UOC_DISABLE_MASK | COMMON_ON_N_MASK, |
| 1 << SIDDQ_SHIFT | 1 << UOC_DISABLE_SHIFT | |
| 1 << COMMON_ON_N_SHIFT); |
| rk_clrsetreg(&grf->uoc0_con[2], |
| SOFT_CON_SEL_MASK, 1 << SOFT_CON_SEL_SHIFT); |
| rk_clrsetreg(&grf->uoc0_con[3], |
| OPMODE_MASK | XCVRSELECT_MASK | |
| TERMSEL_FULLSPEED_MASK | SUSPENDN_MASK, |
| OPMODE_NODRIVING << OPMODE_SHIFT | |
| XCVRSELECT_FSTRANSC << XCVRSELECT_SHIFT | |
| 1 << TERMSEL_FULLSPEED_SHIFT | |
| 1 << SUSPENDN_SHIFT); |
| rk_clrsetreg(&grf->uoc0_con[0], |
| BYPASSSEL_MASK | BYPASSDMEN_MASK, |
| 1 << BYPASSSEL_SHIFT | 1 << BYPASSDMEN_SHIFT); |
| #endif |
| |
| /* enable noc remap to mimic legacy loaders */ |
| rk_clrsetreg(&grf->soc_con0, |
| NOC_REMAP_MASK << NOC_REMAP_SHIFT, |
| NOC_REMAP_MASK << NOC_REMAP_SHIFT); |
| |
| return 0; |
| } |
| #endif |
| |
| #ifdef CONFIG_SPL_BUILD |
| static int setup_led(void) |
| { |
| #ifdef CONFIG_SPL_LED |
| struct udevice *dev; |
| char *led_name; |
| int ret; |
| |
| led_name = fdtdec_get_config_string(gd->fdt_blob, "u-boot,boot-led"); |
| if (!led_name) |
| return 0; |
| ret = led_get_by_label(led_name, &dev); |
| if (ret) { |
| debug("%s: get=%d\n", __func__, ret); |
| return ret; |
| } |
| ret = led_set_on(dev, 1); |
| if (ret) |
| return ret; |
| #endif |
| |
| return 0; |
| } |
| |
| void spl_board_init(void) |
| { |
| int ret; |
| |
| ret = setup_led(); |
| if (ret) { |
| debug("LED ret=%d\n", ret); |
| hang(); |
| } |
| } |
| #endif |