common/spl/spl_fit.c - filogic/uboot - Gitiles

 /*
  * Copyright (C) 2016 Google, Inc
  * Written by Simon Glass <sjg@chromium.org>
  *
  * SPDX-License-Identifier:     GPL-2.0+
  */

 #include <common.h>
 #include <errno.h>
 #include <image.h>
 #include <libfdt.h>
 #include <spl.h>

 #ifndef CONFIG_SYS_BOOTM_LEN
 #define CONFIG_SYS_BOOTM_LEN	(64 << 20)
 #endif

 /**
  * spl_fit_get_image_node(): By using the matching configuration subnode,
  * retrieve the name of an image, specified by a property name and an index
  * into that.
  * @fit:	Pointer to the FDT blob.
  * @images:	Offset of the /images subnode.
  * @type:	Name of the property within the configuration subnode.
  * @index:	Index into the list of strings in this property.
  *
  * Return:	the node offset of the respective image node or a negative
  * 		error number.
  */
 static int spl_fit_get_image_node(const void *fit, int images,
 				  const char *type, int index)
 {
 	const char *name, *str;
 	int node, conf_node;
 	int len, i;

 	conf_node = fit_find_config_node(fit);
 	if (conf_node < 0) {
 #ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
 		printf("No matching DT out of these options:\n");
 		for (node = fdt_first_subnode(fit, conf_node);
 		     node >= 0;
 		     node = fdt_next_subnode(fit, node)) {
 			name = fdt_getprop(fit, node, "description", &len);
 			printf("   %s\n", name);
 		}
 #endif
 		return conf_node;
 	}

 	name = fdt_getprop(fit, conf_node, type, &len);
 	if (!name) {
 		debug("cannot find property '%s': %d\n", type, len);
 		return -EINVAL;
 	}

 	str = name;
 	for (i = 0; i < index; i++) {
 		str = strchr(str, '\0') + 1;
 		if (!str || (str - name >= len)) {
 			debug("no string for index %d\n", index);
 			return -E2BIG;
 		}
 	}

 	debug("%s: '%s'\n", type, str);
 	node = fdt_subnode_offset(fit, images, str);
 	if (node < 0) {
 		debug("cannot find image node '%s': %d\n", str, node);
 		return -EINVAL;
 	}

 	return node;
 }

 static int get_aligned_image_offset(struct spl_load_info *info, int offset)
 {
 	/*
 	 * If it is a FS read, get the first address before offset which is
 	 * aligned to ARCH_DMA_MINALIGN. If it is raw read return the
 	 * block number to which offset belongs.
 	 */
 	if (info->filename)
 		return offset & ~(ARCH_DMA_MINALIGN - 1);

 	return offset / info->bl_len;
 }

 static int get_aligned_image_overhead(struct spl_load_info *info, int offset)
 {
 	/*
 	 * If it is a FS read, get the difference between the offset and
 	 * the first address before offset which is aligned to
 	 * ARCH_DMA_MINALIGN. If it is raw read return the offset within the
 	 * block.
 	 */
 	if (info->filename)
 		return offset & (ARCH_DMA_MINALIGN - 1);

 	return offset % info->bl_len;
 }

 static int get_aligned_image_size(struct spl_load_info *info, int data_size,
 				  int offset)
 {
 	data_size = data_size + get_aligned_image_overhead(info, offset);

 	if (info->filename)
 		return data_size;

 	return (data_size + info->bl_len - 1) / info->bl_len;
 }

 /**
  * spl_load_fit_image(): load the image described in a certain FIT node
  * @info:	points to information about the device to load data from
  * @sector:	the start sector of the FIT image on the device
  * @fit:	points to the flattened device tree blob describing the FIT
  * 		image
  * @base_offset: the beginning of the data area containing the actual
  *		image data, relative to the beginning of the FIT
  * @node:	offset of the DT node describing the image to load (relative
  * 		to @fit)
  * @image_info:	will be filled with information about the loaded image
  * 		If the FIT node does not contain a "load" (address) property,
  * 		the image gets loaded to the address pointed to by the
  * 		load_addr member in this struct.
  *
  * Return:	0 on success or a negative error number.
  */
 static int spl_load_fit_image(struct spl_load_info *info, ulong sector,
 			      void *fit, ulong base_offset, int node,
 			      struct spl_image_info *image_info)
 {
 	int offset;
 	size_t length;
 	int len;
 	ulong load_addr, load_ptr;
 	void *src;
 	ulong overhead;
 	int nr_sectors;
 	int align_len = ARCH_DMA_MINALIGN - 1;
 	uint8_t image_comp = -1, type = -1;
 	const void *data;

 	if (IS_ENABLED(CONFIG_SPL_OS_BOOT) && IS_ENABLED(CONFIG_SPL_GZIP)) {
 		if (fit_image_get_comp(fit, node, &image_comp))
 			puts("Cannot get image compression format.\n");
 		else
 			debug("%s ", genimg_get_comp_name(image_comp));

 		if (fit_image_get_type(fit, node, &type))
 			puts("Cannot get image type.\n");
 		else
 			debug("%s ", genimg_get_type_name(type));
 	}

 	if (fit_image_get_load(fit, node, &load_addr))
 		load_addr = image_info->load_addr;

 	if (!fit_image_get_data_offset(fit, node, &offset)) {
 		/* External data */
 		offset += base_offset;
 		if (fit_image_get_data_size(fit, node, &len))
 			return -ENOENT;

 		load_ptr = (load_addr + align_len) & ~align_len;
 		length = len;

 		overhead = get_aligned_image_overhead(info, offset);
 		nr_sectors = get_aligned_image_size(info, length, offset);

 		if (info->read(info,
 			       sector + get_aligned_image_offset(info, offset),
 			       nr_sectors, (void *)load_ptr) != nr_sectors)
 			return -EIO;

 		debug("External data: dst=%lx, offset=%x, size=%lx\n",
 		      load_ptr, offset, (unsigned long)length);
 		src = (void *)load_ptr + overhead;
 	} else {
 		/* Embedded data */
 		if (fit_image_get_data(fit, node, &data, &length)) {
 			puts("Cannot get image data/size\n");
 			return -ENOENT;
 		}
 		debug("Embedded data: dst=%lx, size=%lx\n", load_addr,
 		      (unsigned long)length);
 		src = (void *)data;
 	}

 #ifdef CONFIG_SPL_FIT_IMAGE_POST_PROCESS
 	board_fit_image_post_process(&src, &length);
 #endif

 	if (IS_ENABLED(CONFIG_SPL_OS_BOOT)	&&
 	    IS_ENABLED(CONFIG_SPL_GZIP)		&&
 	    image_comp == IH_COMP_GZIP		&&
 	    type == IH_TYPE_KERNEL) {
 		if (gunzip((void *)load_addr, CONFIG_SYS_BOOTM_LEN,
 			   src, &length)) {
 			puts("Uncompressing error\n");
 			return -EIO;
 		}
 	} else {
 		memcpy((void *)load_addr, src, length);
 	}

 	if (image_info) {
 		image_info->load_addr = load_addr;
 		image_info->size = length;
 		image_info->entry_point = fdt_getprop_u32(fit, node, "entry");
 	}

 	return 0;
 }

 int spl_load_simple_fit(struct spl_image_info *spl_image,
 			struct spl_load_info *info, ulong sector, void *fit)
 {
 	int sectors;
 	ulong size;
 	unsigned long count;
 	struct spl_image_info image_info;
 	bool boot_os = false;
 	int node = -1;
 	int images, ret;
 	int base_offset, align_len = ARCH_DMA_MINALIGN - 1;
 	int index = 0;

 	/*
 	 * For FIT with external data, figure out where the external images
 	 * start. This is the base for the data-offset properties in each
 	 * image.
 	 */
 	size = fdt_totalsize(fit);
 	size = (size + 3) & ~3;
 	base_offset = (size + 3) & ~3;

 	/*
 	 * So far we only have one block of data from the FIT. Read the entire
 	 * thing, including that first block, placing it so it finishes before
 	 * where we will load the image.
 	 *
 	 * Note that we will load the image such that its first byte will be
 	 * at the load address. Since that byte may be part-way through a
 	 * block, we may load the image up to one block before the load
 	 * address. So take account of that here by subtracting an addition
 	 * block length from the FIT start position.
 	 *
 	 * In fact the FIT has its own load address, but we assume it cannot
 	 * be before CONFIG_SYS_TEXT_BASE.
 	 *
 	 * For FIT with data embedded, data is loaded as part of FIT image.
 	 * For FIT with external data, data is not loaded in this step.
 	 */
 	fit = (void *)((CONFIG_SYS_TEXT_BASE - size - info->bl_len -
 			align_len) & ~align_len);
 	sectors = get_aligned_image_size(info, size, 0);
 	count = info->read(info, sector, sectors, fit);
 	debug("fit read sector %lx, sectors=%d, dst=%p, count=%lu\n",
 	      sector, sectors, fit, count);
 	if (count == 0)
 		return -EIO;

 	/* find the node holding the images information */
 	images = fdt_path_offset(fit, FIT_IMAGES_PATH);
 	if (images < 0) {
 		debug("%s: Cannot find /images node: %d\n", __func__, images);
 		return -1;
 	}

 #ifdef CONFIG_SPL_OS_BOOT
 	/* Find OS image first */
 	node = spl_fit_get_image_node(fit, images, FIT_KERNEL_PROP, 0);
 	if (node < 0)
 		debug("No kernel image.\n");
 	else
 		boot_os = true;
 #endif
 	/* find the U-Boot image */
 	if (node < 0)
 		node = spl_fit_get_image_node(fit, images, "firmware", 0);
 	if (node < 0) {
 		debug("could not find firmware image, trying loadables...\n");
 		node = spl_fit_get_image_node(fit, images, "loadables", 0);
 		/*
 		 * If we pick the U-Boot image from "loadables", start at
 		 * the second image when later loading additional images.
 		 */
 		index = 1;
 	}
 	if (node < 0) {
 		debug("%s: Cannot find u-boot image node: %d\n",
 		      __func__, node);
 		return -1;
 	}

 	/* Load the image and set up the spl_image structure */
 	ret = spl_load_fit_image(info, sector, fit, base_offset, node,
 				 spl_image);
 	if (ret)
 		return ret;

 #ifdef CONFIG_SPL_OS_BOOT
 	if (!fit_image_get_os(fit, node, &spl_image->os))
 		debug("Image OS is %s\n", genimg_get_os_name(spl_image->os));
 #else
 	spl_image->os = IH_OS_U_BOOT;
 #endif

 	if (!boot_os) {
 		/* Figure out which device tree the board wants to use */
 		node = spl_fit_get_image_node(fit, images, FIT_FDT_PROP, 0);
 		if (node < 0) {
 			debug("%s: cannot find FDT node\n", __func__);
 			return node;
 		}

 		/*
 		 * Read the device tree and place it after the image.
 		 * Align the destination address to ARCH_DMA_MINALIGN.
 		 */
 		image_info.load_addr = spl_image->load_addr + spl_image->size;
 		ret = spl_load_fit_image(info, sector, fit, base_offset, node,
 					 &image_info);
 		if (ret < 0)
 			return ret;
 	}

 	/* Now check if there are more images for us to load */
 	for (; ; index++) {
 		node = spl_fit_get_image_node(fit, images, "loadables", index);
 		if (node < 0)
 			break;

 		ret = spl_load_fit_image(info, sector, fit, base_offset, node,
 					 &image_info);
 		if (ret < 0)
 			continue;

 		/*
 		 * If the "firmware" image did not provide an entry point,
 		 * use the first valid entry point from the loadables.
 		 */
 		if (spl_image->entry_point == FDT_ERROR &&
 		    image_info.entry_point != FDT_ERROR)
 			spl_image->entry_point = image_info.entry_point;
 	}

 	/*
 	 * If a platform does not provide CONFIG_SYS_UBOOT_START, U-Boot's
 	 * Makefile will set it to 0 and it will end up as the entry point
 	 * here. What it actually means is: use the load address.
 	 */
 	if (spl_image->entry_point == FDT_ERROR || spl_image->entry_point == 0)
 		spl_image->entry_point = spl_image->load_addr;

 	return 0;
 }
	/*
	* Copyright (C) 2016 Google, Inc
	* Written by Simon Glass <sjg@chromium.org>
	*
	* SPDX-License-Identifier: GPL-2.0+
	*/

	#include <common.h>
	#include <errno.h>
	#include <image.h>
	#include <libfdt.h>
	#include <spl.h>

	#ifndef CONFIG_SYS_BOOTM_LEN
	#define CONFIG_SYS_BOOTM_LEN (64 << 20)
	#endif

	/**
	* spl_fit_get_image_node(): By using the matching configuration subnode,
	* retrieve the name of an image, specified by a property name and an index
	* into that.
	* @fit: Pointer to the FDT blob.
	* @images: Offset of the /images subnode.
	* @type: Name of the property within the configuration subnode.
	* @index: Index into the list of strings in this property.
	*
	* Return: the node offset of the respective image node or a negative
	* error number.
	*/
	static int spl_fit_get_image_node(const void *fit, int images,
	const char *type, int index)
	{
	const char name, str;
	int node, conf_node;
	int len, i;

	conf_node = fit_find_config_node(fit);
	if (conf_node < 0) {
	#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
	printf("No matching DT out of these options:\n");
	for (node = fdt_first_subnode(fit, conf_node);
	node >= 0;
	node = fdt_next_subnode(fit, node)) {
	name = fdt_getprop(fit, node, "description", &len);
	printf(" %s\n", name);
	}
	#endif
	return conf_node;
	}

	name = fdt_getprop(fit, conf_node, type, &len);
	if (!name) {
	debug("cannot find property '%s': %d\n", type, len);
	return -EINVAL;
	}

	str = name;
	for (i = 0; i < index; i++) {
	str = strchr(str, '\0') + 1;
	if (!str \|\| (str - name >= len)) {
	debug("no string for index %d\n", index);
	return -E2BIG;
	}
	}

	debug("%s: '%s'\n", type, str);
	node = fdt_subnode_offset(fit, images, str);
	if (node < 0) {
	debug("cannot find image node '%s': %d\n", str, node);
	return -EINVAL;
	}

	return node;
	}

	static int get_aligned_image_offset(struct spl_load_info *info, int offset)
	{
	/*
	* If it is a FS read, get the first address before offset which is
	* aligned to ARCH_DMA_MINALIGN. If it is raw read return the
	* block number to which offset belongs.
	*/
	if (info->filename)
	return offset & ~(ARCH_DMA_MINALIGN - 1);

	return offset / info->bl_len;
	}

	static int get_aligned_image_overhead(struct spl_load_info *info, int offset)
	{
	/*
	* If it is a FS read, get the difference between the offset and
	* the first address before offset which is aligned to
	* ARCH_DMA_MINALIGN. If it is raw read return the offset within the
	* block.
	*/
	if (info->filename)
	return offset & (ARCH_DMA_MINALIGN - 1);

	return offset % info->bl_len;
	}

	static int get_aligned_image_size(struct spl_load_info *info, int data_size,
	int offset)
	{
	data_size = data_size + get_aligned_image_overhead(info, offset);

	if (info->filename)
	return data_size;

	return (data_size + info->bl_len - 1) / info->bl_len;
	}

	/**
	* spl_load_fit_image(): load the image described in a certain FIT node
	* @info: points to information about the device to load data from
	* @sector: the start sector of the FIT image on the device
	* @fit: points to the flattened device tree blob describing the FIT
	* image
	* @base_offset: the beginning of the data area containing the actual
	* image data, relative to the beginning of the FIT
	* @node: offset of the DT node describing the image to load (relative
	* to @fit)
	* @image_info: will be filled with information about the loaded image
	* If the FIT node does not contain a "load" (address) property,
	* the image gets loaded to the address pointed to by the
	* load_addr member in this struct.
	*
	* Return: 0 on success or a negative error number.
	*/
	static int spl_load_fit_image(struct spl_load_info *info, ulong sector,
	void *fit, ulong base_offset, int node,
	struct spl_image_info *image_info)
	{
	int offset;
	size_t length;
	int len;
	ulong load_addr, load_ptr;
	void *src;
	ulong overhead;
	int nr_sectors;
	int align_len = ARCH_DMA_MINALIGN - 1;
	uint8_t image_comp = -1, type = -1;
	const void *data;

	if (IS_ENABLED(CONFIG_SPL_OS_BOOT) && IS_ENABLED(CONFIG_SPL_GZIP)) {
	if (fit_image_get_comp(fit, node, &image_comp))
	puts("Cannot get image compression format.\n");
	else
	debug("%s ", genimg_get_comp_name(image_comp));

	if (fit_image_get_type(fit, node, &type))
	puts("Cannot get image type.\n");
	else
	debug("%s ", genimg_get_type_name(type));
	}

	if (fit_image_get_load(fit, node, &load_addr))
	load_addr = image_info->load_addr;

	if (!fit_image_get_data_offset(fit, node, &offset)) {
	/* External data */
	offset += base_offset;
	if (fit_image_get_data_size(fit, node, &len))
	return -ENOENT;

	load_ptr = (load_addr + align_len) & ~align_len;
	length = len;

	overhead = get_aligned_image_overhead(info, offset);
	nr_sectors = get_aligned_image_size(info, length, offset);

	if (info->read(info,
	sector + get_aligned_image_offset(info, offset),
	nr_sectors, (void *)load_ptr) != nr_sectors)
	return -EIO;

	debug("External data: dst=%lx, offset=%x, size=%lx\n",
	load_ptr, offset, (unsigned long)length);
	src = (void *)load_ptr + overhead;
	} else {
	/* Embedded data */
	if (fit_image_get_data(fit, node, &data, &length)) {
	puts("Cannot get image data/size\n");
	return -ENOENT;
	}
	debug("Embedded data: dst=%lx, size=%lx\n", load_addr,
	(unsigned long)length);
	src = (void *)data;
	}

	#ifdef CONFIG_SPL_FIT_IMAGE_POST_PROCESS
	board_fit_image_post_process(&src, &length);
	#endif

	if (IS_ENABLED(CONFIG_SPL_OS_BOOT) &&
	IS_ENABLED(CONFIG_SPL_GZIP) &&
	image_comp == IH_COMP_GZIP &&
	type == IH_TYPE_KERNEL) {
	if (gunzip((void *)load_addr, CONFIG_SYS_BOOTM_LEN,
	src, &length)) {
	puts("Uncompressing error\n");
	return -EIO;
	}
	} else {
	memcpy((void *)load_addr, src, length);
	}

	if (image_info) {
	image_info->load_addr = load_addr;
	image_info->size = length;
	image_info->entry_point = fdt_getprop_u32(fit, node, "entry");
	}

	return 0;
	}

	int spl_load_simple_fit(struct spl_image_info *spl_image,
	struct spl_load_info info, ulong sector, void fit)
	{
	int sectors;
	ulong size;
	unsigned long count;
	struct spl_image_info image_info;
	bool boot_os = false;
	int node = -1;
	int images, ret;
	int base_offset, align_len = ARCH_DMA_MINALIGN - 1;
	int index = 0;

	/*
	* For FIT with external data, figure out where the external images
	* start. This is the base for the data-offset properties in each
	* image.
	*/
	size = fdt_totalsize(fit);
	size = (size + 3) & ~3;
	base_offset = (size + 3) & ~3;

	/*
	* So far we only have one block of data from the FIT. Read the entire
	* thing, including that first block, placing it so it finishes before
	* where we will load the image.
	*
	* Note that we will load the image such that its first byte will be
	* at the load address. Since that byte may be part-way through a
	* block, we may load the image up to one block before the load
	* address. So take account of that here by subtracting an addition
	* block length from the FIT start position.
	*
	* In fact the FIT has its own load address, but we assume it cannot
	* be before CONFIG_SYS_TEXT_BASE.
	*
	* For FIT with data embedded, data is loaded as part of FIT image.
	* For FIT with external data, data is not loaded in this step.
	*/
	fit = (void *)((CONFIG_SYS_TEXT_BASE - size - info->bl_len -
	align_len) & ~align_len);
	sectors = get_aligned_image_size(info, size, 0);
	count = info->read(info, sector, sectors, fit);
	debug("fit read sector %lx, sectors=%d, dst=%p, count=%lu\n",
	sector, sectors, fit, count);
	if (count == 0)
	return -EIO;

	/* find the node holding the images information */
	images = fdt_path_offset(fit, FIT_IMAGES_PATH);
	if (images < 0) {
	debug("%s: Cannot find /images node: %d\n", __func__, images);
	return -1;
	}

	#ifdef CONFIG_SPL_OS_BOOT
	/* Find OS image first */
	node = spl_fit_get_image_node(fit, images, FIT_KERNEL_PROP, 0);
	if (node < 0)
	debug("No kernel image.\n");
	else
	boot_os = true;
	#endif
	/* find the U-Boot image */
	if (node < 0)
	node = spl_fit_get_image_node(fit, images, "firmware", 0);
	if (node < 0) {
	debug("could not find firmware image, trying loadables...\n");
	node = spl_fit_get_image_node(fit, images, "loadables", 0);
	/*
	* If we pick the U-Boot image from "loadables", start at
	* the second image when later loading additional images.
	*/
	index = 1;
	}
	if (node < 0) {
	debug("%s: Cannot find u-boot image node: %d\n",
	__func__, node);
	return -1;
	}

	/* Load the image and set up the spl_image structure */
	ret = spl_load_fit_image(info, sector, fit, base_offset, node,
	spl_image);
	if (ret)
	return ret;

	#ifdef CONFIG_SPL_OS_BOOT
	if (!fit_image_get_os(fit, node, &spl_image->os))
	debug("Image OS is %s\n", genimg_get_os_name(spl_image->os));
	#else
	spl_image->os = IH_OS_U_BOOT;
	#endif

	if (!boot_os) {
	/* Figure out which device tree the board wants to use */
	node = spl_fit_get_image_node(fit, images, FIT_FDT_PROP, 0);
	if (node < 0) {
	debug("%s: cannot find FDT node\n", __func__);
	return node;
	}

	/*
	* Read the device tree and place it after the image.
	* Align the destination address to ARCH_DMA_MINALIGN.
	*/
	image_info.load_addr = spl_image->load_addr + spl_image->size;
	ret = spl_load_fit_image(info, sector, fit, base_offset, node,
	&image_info);
	if (ret < 0)
	return ret;
	}

	/* Now check if there are more images for us to load */
	for (; ; index++) {
	node = spl_fit_get_image_node(fit, images, "loadables", index);
	if (node < 0)
	break;

	ret = spl_load_fit_image(info, sector, fit, base_offset, node,
	&image_info);
	if (ret < 0)
	continue;

	/*
	* If the "firmware" image did not provide an entry point,
	* use the first valid entry point from the loadables.
	*/
	if (spl_image->entry_point == FDT_ERROR &&
	image_info.entry_point != FDT_ERROR)
	spl_image->entry_point = image_info.entry_point;
	}

	/*
	* If a platform does not provide CONFIG_SYS_UBOOT_START, U-Boot's
	* Makefile will set it to 0 and it will end up as the entry point
	* here. What it actually means is: use the load address.
	*/
	if (spl_image->entry_point == FDT_ERROR \|\| spl_image->entry_point == 0)
	spl_image->entry_point = spl_image->load_addr;

	return 0;
	}