mmc: tmio: sdhi: Move tap_pos to private data
Move the tap_pos variable, which is the HS200/HS400/SDR104 calibration
offset, into private data, so it can be passed around. This is done in
preparation for the HS400 mode, which needs to adjust this value.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
diff --git a/drivers/mmc/renesas-sdhi.c b/drivers/mmc/renesas-sdhi.c
index 0cc6f27..1ed50d6 100644
--- a/drivers/mmc/renesas-sdhi.c
+++ b/drivers/mmc/renesas-sdhi.c
@@ -125,7 +125,6 @@
unsigned int smpcmp)
{
unsigned long tap_cnt; /* counter of tuning success */
- unsigned long tap_set; /* tap position */
unsigned long tap_start;/* start position of tuning success */
unsigned long tap_end; /* end position of tuning success */
unsigned long ntap; /* temporary counter of tuning success */
@@ -209,12 +208,12 @@
select = true;
if (select)
- tap_set = ((tap_start + tap_end) / 2) % tap_num;
+ priv->tap_set = ((tap_start + tap_end) / 2) % tap_num;
else
return -EIO;
/* Set SCC */
- tmio_sd_writel(priv, tap_set, RENESAS_SDHI_SCC_TAPSET);
+ tmio_sd_writel(priv, priv->tap_set, RENESAS_SDHI_SCC_TAPSET);
/* Enable auto re-tuning */
reg = tmio_sd_readl(priv, RENESAS_SDHI_SCC_RVSCNTL);