| /* |
| * Copyright (C) 2006 Freescale Semiconductor, Inc. |
| * |
| * Dave Liu <daveliu@freescale.com> |
| * based on source code of Shlomi Gridish |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include "common.h" |
| #include "asm/errno.h" |
| #include "asm/io.h" |
| #include "asm/immap_83xx.h" |
| |
| #define NUM_OF_PINS 32 |
| void qe_config_iopin(u8 port, u8 pin, int dir, int open_drain, int assign) |
| { |
| u32 pin_2bit_mask; |
| u32 pin_2bit_dir; |
| u32 pin_2bit_assign; |
| u32 pin_1bit_mask; |
| u32 tmp_val; |
| volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR; |
| volatile qepio83xx_t *par_io = (volatile qepio83xx_t *)&im->qepio; |
| |
| /* Calculate pin location and 2bit mask and dir */ |
| pin_2bit_mask = (u32)(0x3 << (NUM_OF_PINS-(pin%(NUM_OF_PINS/2)+1)*2)); |
| pin_2bit_dir = (u32)(dir << (NUM_OF_PINS-(pin%(NUM_OF_PINS/2)+1)*2)); |
| |
| /* Setup the direction */ |
| tmp_val = (pin > (NUM_OF_PINS/2) - 1) ? \ |
| in_be32(&par_io->ioport[port].dir2) : |
| in_be32(&par_io->ioport[port].dir1); |
| |
| if (pin > (NUM_OF_PINS/2) -1) { |
| out_be32(&par_io->ioport[port].dir2, ~pin_2bit_mask & tmp_val); |
| out_be32(&par_io->ioport[port].dir2, pin_2bit_dir | tmp_val); |
| } else { |
| out_be32(&par_io->ioport[port].dir1, ~pin_2bit_mask & tmp_val); |
| out_be32(&par_io->ioport[port].dir1, pin_2bit_dir | tmp_val); |
| } |
| |
| /* Calculate pin location for 1bit mask */ |
| pin_1bit_mask = (u32)(1 << (NUM_OF_PINS - (pin+1))); |
| |
| /* Setup the open drain */ |
| tmp_val = in_be32(&par_io->ioport[port].podr); |
| if (open_drain) { |
| out_be32(&par_io->ioport[port].podr, pin_1bit_mask | tmp_val); |
| } else { |
| out_be32(&par_io->ioport[port].podr, ~pin_1bit_mask & tmp_val); |
| } |
| |
| /* Setup the assignment */ |
| tmp_val = (pin > (NUM_OF_PINS/2) - 1) ? |
| in_be32(&par_io->ioport[port].ppar2): |
| in_be32(&par_io->ioport[port].ppar1); |
| pin_2bit_assign = (u32)(assign |
| << (NUM_OF_PINS - (pin%(NUM_OF_PINS/2)+1)*2)); |
| |
| /* Clear and set 2 bits mask */ |
| if (pin > (NUM_OF_PINS/2) - 1) { |
| out_be32(&par_io->ioport[port].ppar2, ~pin_2bit_mask & tmp_val); |
| out_be32(&par_io->ioport[port].ppar2, pin_2bit_assign | tmp_val); |
| } else { |
| out_be32(&par_io->ioport[port].ppar1, ~pin_2bit_mask & tmp_val); |
| out_be32(&par_io->ioport[port].ppar1, pin_2bit_assign | tmp_val); |
| } |
| } |