| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (c) 2009 Wind River Systems, Inc. |
| * Tom Rix <Tom.Rix@windriver.com> |
| * |
| * This is file is based on |
| * repository git.gitorious.org/u-boot-omap3/mainline.git, |
| * branch omap3-dev-usb, file drivers/usb/host/omap3530_usb.c |
| * |
| * This is the unique part of its copyright : |
| * |
| * ------------------------------------------------------------------------ |
| * |
| * Copyright (c) 2009 Texas Instruments |
| * |
| * ------------------------------------------------------------------------ |
| */ |
| |
| #include <serial.h> |
| #include <asm/omap_common.h> |
| #include <twl4030.h> |
| #include "omap3.h" |
| |
| static int platform_needs_initialization = 1; |
| |
| struct musb_config musb_cfg = { |
| .regs = (struct musb_regs *)MENTOR_USB0_BASE, |
| .timeout = OMAP3_USB_TIMEOUT, |
| .musb_speed = 0, |
| }; |
| |
| /* |
| * OMAP3 USB OTG registers. |
| */ |
| struct omap3_otg_regs { |
| u32 revision; |
| u32 sysconfig; |
| u32 sysstatus; |
| u32 interfsel; |
| u32 simenable; |
| u32 forcestdby; |
| }; |
| |
| static struct omap3_otg_regs *otg; |
| |
| #define OMAP3_OTG_SYSCONFIG_SMART_STANDBY_MODE 0x2000 |
| #define OMAP3_OTG_SYSCONFIG_NO_STANDBY_MODE 0x1000 |
| #define OMAP3_OTG_SYSCONFIG_SMART_IDLE_MODE 0x0010 |
| #define OMAP3_OTG_SYSCONFIG_NO_IDLE_MODE 0x0008 |
| #define OMAP3_OTG_SYSCONFIG_ENABLEWAKEUP 0x0004 |
| #define OMAP3_OTG_SYSCONFIG_SOFTRESET 0x0002 |
| #define OMAP3_OTG_SYSCONFIG_AUTOIDLE 0x0001 |
| |
| #define OMAP3_OTG_SYSSTATUS_RESETDONE 0x0001 |
| |
| #define OMAP3_OTG_INTERFSEL_OMAP 0x0001 |
| |
| #define OMAP3_OTG_FORCESTDBY_STANDBY 0x0001 |
| |
| #ifdef DEBUG_MUSB_OMAP3 |
| static void musb_db_otg_regs(void) |
| { |
| u32 l; |
| l = readl(&otg->revision); |
| serial_printf("OTG_REVISION 0x%x\n", l); |
| l = readl(&otg->sysconfig); |
| serial_printf("OTG_SYSCONFIG 0x%x\n", l); |
| l = readl(&otg->sysstatus); |
| serial_printf("OTG_SYSSTATUS 0x%x\n", l); |
| l = readl(&otg->interfsel); |
| serial_printf("OTG_INTERFSEL 0x%x\n", l); |
| l = readl(&otg->forcestdby); |
| serial_printf("OTG_FORCESTDBY 0x%x\n", l); |
| } |
| #endif |
| |
| int musb_platform_init(void) |
| { |
| int ret = -1; |
| |
| if (platform_needs_initialization) { |
| u32 stdby; |
| |
| /* |
| * OMAP3EVM uses ISP1504 phy and so |
| * twl4030 related init is not required. |
| */ |
| #ifdef CONFIG_TWL4030_USB |
| if (twl4030_usb_ulpi_init()) { |
| serial_printf("ERROR: %s Could not initialize PHY\n", |
| __PRETTY_FUNCTION__); |
| goto end; |
| } |
| #endif |
| |
| otg = (struct omap3_otg_regs *)OMAP3_OTG_BASE; |
| |
| /* Set OTG to always be on */ |
| writel(OMAP3_OTG_SYSCONFIG_NO_STANDBY_MODE | |
| OMAP3_OTG_SYSCONFIG_NO_IDLE_MODE, &otg->sysconfig); |
| |
| /* Set the interface */ |
| writel(OMAP3_OTG_INTERFSEL_OMAP, &otg->interfsel); |
| |
| /* Clear force standby */ |
| stdby = readl(&otg->forcestdby); |
| stdby &= ~OMAP3_OTG_FORCESTDBY_STANDBY; |
| writel(stdby, &otg->forcestdby); |
| |
| #ifdef CONFIG_TARGET_OMAP3_EVM |
| musb_cfg.extvbus = omap3_evm_need_extvbus(); |
| #endif |
| |
| platform_needs_initialization = 0; |
| } |
| |
| ret = platform_needs_initialization; |
| |
| #ifdef CONFIG_TWL4030_USB |
| end: |
| #endif |
| return ret; |
| |
| } |
| |
| void musb_platform_deinit(void) |
| { |
| /* noop */ |
| } |