| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * URB OHCI HCD (Host Controller Driver) for USB on the AT91RM9200 and PCI bus. |
| * |
| * Interrupt support is added. Now, it has been tested |
| * on ULI1575 chip and works well with USB keyboard. |
| * |
| * (C) Copyright 2007 |
| * Zhang Wei, Freescale Semiconductor, Inc. <wei.zhang@freescale.com> |
| * |
| * (C) Copyright 2003 |
| * Gary Jennejohn, DENX Software Engineering <garyj@denx.de> |
| * |
| * Note: Much of this code has been derived from Linux 2.4 |
| * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at> |
| * (C) Copyright 2000-2002 David Brownell |
| * |
| * Modified for the MP2USB by (C) Copyright 2005 Eric Benard |
| * ebenard@eukrea.com - based on s3c24x0's driver |
| */ |
| /* |
| * IMPORTANT NOTES |
| * 1 - Read doc/README.generic_usb_ohci |
| * 2 - this driver is intended for use with USB Mass Storage Devices |
| * (BBB) and USB keyboard. There is NO support for Isochronous pipes! |
| * 2 - when running on a PQFP208 AT91RM9200, define CONFIG_AT91C_PQFP_UHPBUG |
| * to activate workaround for bug #41 or this driver will NOT work! |
| */ |
| |
| #include <config.h> |
| #include <cpu_func.h> |
| #include <asm/byteorder.h> |
| #include <dm.h> |
| #include <errno.h> |
| #include <asm/cache.h> |
| #include <linux/delay.h> |
| |
| #include <malloc.h> |
| #include <memalign.h> |
| #include <usb.h> |
| |
| #include "ohci.h" |
| |
| #ifdef CONFIG_AT91RM9200 |
| #include <asm/arch/hardware.h> /* needed for AT91_USB_HOST_BASE */ |
| #endif |
| |
| #if defined(CONFIG_CPU_ARM920T) || \ |
| defined(CONFIG_PCI) || \ |
| defined(CONFIG_SYS_OHCI_USE_NPS) |
| # define OHCI_USE_NPS /* force NoPowerSwitching mode */ |
| #endif |
| |
| #undef OHCI_VERBOSE_DEBUG /* not always helpful */ |
| #undef DEBUG |
| #undef SHOW_INFO |
| #undef OHCI_FILL_TRACE |
| |
| /* For initializing controller (mask in an HCFS mode too) */ |
| #define OHCI_CONTROL_INIT \ |
| (OHCI_CTRL_CBSR & 0x3) | OHCI_CTRL_IE | OHCI_CTRL_PLE |
| |
| #ifdef DEBUG |
| #define dbg(format, arg...) printf("DEBUG: " format "\n", ## arg) |
| #else |
| #define dbg(format, arg...) do {} while (0) |
| #endif /* DEBUG */ |
| #define err(format, arg...) printf("ERROR: " format "\n", ## arg) |
| #ifdef SHOW_INFO |
| #define info(format, arg...) printf("INFO: " format "\n", ## arg) |
| #else |
| #define info(format, arg...) do {} while (0) |
| #endif |
| |
| #ifdef CONFIG_SYS_OHCI_BE_CONTROLLER |
| # define m16_swap(x) cpu_to_be16(x) |
| # define m32_swap(x) cpu_to_be32(x) |
| #else |
| # define m16_swap(x) cpu_to_le16(x) |
| # define m32_swap(x) cpu_to_le32(x) |
| #endif /* CONFIG_SYS_OHCI_BE_CONTROLLER */ |
| |
| /* We really should do proper cache flushing everywhere */ |
| #define flush_dcache_buffer(addr, size) \ |
| flush_dcache_range((unsigned long)(addr), \ |
| ALIGN((unsigned long)(addr) + size, ARCH_DMA_MINALIGN)) |
| #define invalidate_dcache_buffer(addr, size) \ |
| invalidate_dcache_range((unsigned long)(addr), \ |
| ALIGN((unsigned long)(addr) + size, ARCH_DMA_MINALIGN)) |
| |
| /* Do not use sizeof(ed / td) as our ed / td structs contain extra members */ |
| #define flush_dcache_ed(addr) flush_dcache_buffer(addr, 16) |
| #define flush_dcache_td(addr) flush_dcache_buffer(addr, 16) |
| #define flush_dcache_iso_td(addr) flush_dcache_buffer(addr, 32) |
| #define flush_dcache_hcca(addr) flush_dcache_buffer(addr, 256) |
| #define invalidate_dcache_ed(addr) invalidate_dcache_buffer(addr, 16) |
| #define invalidate_dcache_td(addr) invalidate_dcache_buffer(addr, 16) |
| #define invalidate_dcache_iso_td(addr) invalidate_dcache_buffer(addr, 32) |
| #define invalidate_dcache_hcca(addr) invalidate_dcache_buffer(addr, 256) |
| |
| #if CONFIG_IS_ENABLED(DM_USB) |
| /* |
| * The various ohci_mdelay(1) calls in the code seem unnecessary. We keep |
| * them around when building for older boards not yet converted to the dm |
| * just in case (to avoid regressions), for dm this turns them into nops. |
| */ |
| #define ohci_mdelay(x) |
| #else |
| #define ohci_mdelay(x) mdelay(x) |
| #endif |
| |
| #if !CONFIG_IS_ENABLED(DM_USB) |
| /* global ohci_t */ |
| static ohci_t gohci; |
| /* this must be aligned to a 256 byte boundary */ |
| struct ohci_hcca ghcca[1]; |
| #endif |
| |
| /* mapping of the OHCI CC status to error codes */ |
| static int cc_to_error[16] = { |
| /* No Error */ 0, |
| /* CRC Error */ USB_ST_CRC_ERR, |
| /* Bit Stuff */ USB_ST_BIT_ERR, |
| /* Data Togg */ USB_ST_CRC_ERR, |
| /* Stall */ USB_ST_STALLED, |
| /* DevNotResp */ -1, |
| /* PIDCheck */ USB_ST_BIT_ERR, |
| /* UnExpPID */ USB_ST_BIT_ERR, |
| /* DataOver */ USB_ST_BUF_ERR, |
| /* DataUnder */ USB_ST_BUF_ERR, |
| /* reservd */ -1, |
| /* reservd */ -1, |
| /* BufferOver */ USB_ST_BUF_ERR, |
| /* BuffUnder */ USB_ST_BUF_ERR, |
| /* Not Access */ -1, |
| /* Not Access */ -1 |
| }; |
| |
| static const char *cc_to_string[16] = { |
| "No Error", |
| "CRC: Last data packet from endpoint contained a CRC error.", |
| "BITSTUFFING: Last data packet from endpoint contained a bit " \ |
| "stuffing violation", |
| "DATATOGGLEMISMATCH: Last packet from endpoint had data toggle PID\n" \ |
| "that did not match the expected value.", |
| "STALL: TD was moved to the Done Queue because the endpoint returned" \ |
| " a STALL PID", |
| "DEVICENOTRESPONDING: Device did not respond to token (IN) or did\n" \ |
| "not provide a handshake (OUT)", |
| "PIDCHECKFAILURE: Check bits on PID from endpoint failed on data PID\n"\ |
| "(IN) or handshake (OUT)", |
| "UNEXPECTEDPID: Receive PID was not valid when encountered or PID\n" \ |
| "value is not defined.", |
| "DATAOVERRUN: The amount of data returned by the endpoint exceeded\n" \ |
| "either the size of the maximum data packet allowed\n" \ |
| "from the endpoint (found in MaximumPacketSize field\n" \ |
| "of ED) or the remaining buffer size.", |
| "DATAUNDERRUN: The endpoint returned less than MaximumPacketSize\n" \ |
| "and that amount was not sufficient to fill the\n" \ |
| "specified buffer", |
| "reserved1", |
| "reserved2", |
| "BUFFEROVERRUN: During an IN, HC received data from endpoint faster\n" \ |
| "than it could be written to system memory", |
| "BUFFERUNDERRUN: During an OUT, HC could not retrieve data from\n" \ |
| "system memory fast enough to keep up with data USB " \ |
| "data rate.", |
| "NOT ACCESSED: This code is set by software before the TD is placed" \ |
| "on a list to be processed by the HC.(1)", |
| "NOT ACCESSED: This code is set by software before the TD is placed" \ |
| "on a list to be processed by the HC.(2)", |
| }; |
| |
| static inline u32 roothub_a(struct ohci *hc) |
| { return ohci_readl(&hc->regs->roothub.a); } |
| static inline u32 roothub_b(struct ohci *hc) |
| { return ohci_readl(&hc->regs->roothub.b); } |
| static inline u32 roothub_status(struct ohci *hc) |
| { return ohci_readl(&hc->regs->roothub.status); } |
| static inline u32 roothub_portstatus(struct ohci *hc, int i) |
| { return ohci_readl(&hc->regs->roothub.portstatus[i]); } |
| |
| /* forward declaration */ |
| static int hc_interrupt(ohci_t *ohci); |
| static void td_submit_job(ohci_t *ohci, struct usb_device *dev, |
| unsigned long pipe, void *buffer, int transfer_len, |
| struct devrequest *setup, urb_priv_t *urb, |
| int interval); |
| static int ep_link(ohci_t * ohci, ed_t * ed); |
| static int ep_unlink(ohci_t * ohci, ed_t * ed); |
| static ed_t *ep_add_ed(ohci_dev_t *ohci_dev, struct usb_device *usb_dev, |
| unsigned long pipe, int interval, int load); |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| /* TDs ... */ |
| static struct td *td_alloc(ohci_dev_t *ohci_dev, struct usb_device *usb_dev) |
| { |
| int i; |
| struct td *td; |
| |
| td = NULL; |
| for (i = 0; i < NUM_TD; i++) |
| { |
| if (ohci_dev->tds[i].usb_dev == NULL) |
| { |
| td = &ohci_dev->tds[i]; |
| td->usb_dev = usb_dev; |
| break; |
| } |
| } |
| |
| return td; |
| } |
| |
| static inline void ed_free(struct ed *ed) |
| { |
| ed->usb_dev = NULL; |
| } |
| |
| /*-------------------------------------------------------------------------* |
| * URB support functions |
| *-------------------------------------------------------------------------*/ |
| |
| /* free HCD-private data associated with this URB */ |
| |
| static void urb_free_priv(urb_priv_t *urb) |
| { |
| int i; |
| int last; |
| struct td *td; |
| |
| last = urb->length - 1; |
| if (last >= 0) { |
| for (i = 0; i <= last; i++) { |
| td = urb->td[i]; |
| if (td) { |
| td->usb_dev = NULL; |
| urb->td[i] = NULL; |
| } |
| } |
| } |
| free(urb); |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| #ifdef DEBUG |
| static int sohci_get_current_frame_number(ohci_t *ohci); |
| |
| /* debug| print the main components of an URB |
| * small: 0) header + data packets 1) just header */ |
| |
| static void pkt_print(ohci_t *ohci, urb_priv_t *purb, struct usb_device *dev, |
| unsigned long pipe, void *buffer, int transfer_len, |
| struct devrequest *setup, char *str, int small) |
| { |
| dbg("%s URB:[%4x] dev:%2lu,ep:%2lu-%c,type:%s,len:%d/%d stat:%#lx", |
| str, |
| sohci_get_current_frame_number(ohci), |
| usb_pipedevice(pipe), |
| usb_pipeendpoint(pipe), |
| usb_pipeout(pipe)? 'O': 'I', |
| usb_pipetype(pipe) < 2 ? \ |
| (usb_pipeint(pipe)? "INTR": "ISOC"): \ |
| (usb_pipecontrol(pipe)? "CTRL": "BULK"), |
| (purb ? purb->actual_length : 0), |
| transfer_len, dev->status); |
| #ifdef OHCI_VERBOSE_DEBUG |
| if (!small) { |
| int i, len; |
| |
| if (usb_pipecontrol(pipe)) { |
| printf(__FILE__ ": cmd(8):"); |
| for (i = 0; i < 8 ; i++) |
| printf(" %02x", ((__u8 *) setup) [i]); |
| printf("\n"); |
| } |
| if (transfer_len > 0 && buffer) { |
| printf(__FILE__ ": data(%d/%d):", |
| (purb ? purb->actual_length : 0), |
| transfer_len); |
| len = usb_pipeout(pipe)? transfer_len: |
| (purb ? purb->actual_length : 0); |
| for (i = 0; i < 16 && i < len; i++) |
| printf(" %02x", ((__u8 *) buffer) [i]); |
| printf("%s\n", i < len? "...": ""); |
| } |
| } |
| #endif |
| } |
| |
| /* just for debugging; prints non-empty branches of the int ed tree |
| * inclusive iso eds */ |
| void ep_print_int_eds(ohci_t *ohci, char *str) |
| { |
| int i, j; |
| __u32 *ed_p; |
| for (i = 0; i < 32; i++) { |
| j = 5; |
| ed_p = &(ohci->hcca->int_table [i]); |
| if (*ed_p == 0) |
| continue; |
| invalidate_dcache_ed(ed_p); |
| printf(__FILE__ ": %s branch int %2d(%2x):", str, i, i); |
| while (*ed_p != 0 && j--) { |
| ed_t *ed = (ed_t *)m32_swap(ed_p); |
| invalidate_dcache_ed(ed); |
| printf(" ed: %4x;", ed->hwINFO); |
| ed_p = &ed->hwNextED; |
| } |
| printf("\n"); |
| } |
| } |
| |
| static void ohci_dump_intr_mask(char *label, __u32 mask) |
| { |
| dbg("%s: 0x%08x%s%s%s%s%s%s%s%s%s", |
| label, |
| mask, |
| (mask & OHCI_INTR_MIE) ? " MIE" : "", |
| (mask & OHCI_INTR_OC) ? " OC" : "", |
| (mask & OHCI_INTR_RHSC) ? " RHSC" : "", |
| (mask & OHCI_INTR_FNO) ? " FNO" : "", |
| (mask & OHCI_INTR_UE) ? " UE" : "", |
| (mask & OHCI_INTR_RD) ? " RD" : "", |
| (mask & OHCI_INTR_SF) ? " SF" : "", |
| (mask & OHCI_INTR_WDH) ? " WDH" : "", |
| (mask & OHCI_INTR_SO) ? " SO" : "" |
| ); |
| } |
| |
| static void maybe_print_eds(char *label, __u32 value) |
| { |
| ed_t *edp = (ed_t *)value; |
| |
| if (value) { |
| dbg("%s %08x", label, value); |
| invalidate_dcache_ed(edp); |
| dbg("%08x", edp->hwINFO); |
| dbg("%08x", edp->hwTailP); |
| dbg("%08x", edp->hwHeadP); |
| dbg("%08x", edp->hwNextED); |
| } |
| } |
| |
| static char *hcfs2string(int state) |
| { |
| switch (state) { |
| case OHCI_USB_RESET: return "reset"; |
| case OHCI_USB_RESUME: return "resume"; |
| case OHCI_USB_OPER: return "operational"; |
| case OHCI_USB_SUSPEND: return "suspend"; |
| } |
| return "?"; |
| } |
| |
| /* dump control and status registers */ |
| static void ohci_dump_status(ohci_t *controller) |
| { |
| struct ohci_regs *regs = controller->regs; |
| __u32 temp; |
| |
| temp = ohci_readl(®s->revision) & 0xff; |
| if (temp != 0x10) |
| dbg("spec %d.%d", (temp >> 4), (temp & 0x0f)); |
| |
| temp = ohci_readl(®s->control); |
| dbg("control: 0x%08x%s%s%s HCFS=%s%s%s%s%s CBSR=%d", temp, |
| (temp & OHCI_CTRL_RWE) ? " RWE" : "", |
| (temp & OHCI_CTRL_RWC) ? " RWC" : "", |
| (temp & OHCI_CTRL_IR) ? " IR" : "", |
| hcfs2string(temp & OHCI_CTRL_HCFS), |
| (temp & OHCI_CTRL_BLE) ? " BLE" : "", |
| (temp & OHCI_CTRL_CLE) ? " CLE" : "", |
| (temp & OHCI_CTRL_IE) ? " IE" : "", |
| (temp & OHCI_CTRL_PLE) ? " PLE" : "", |
| temp & OHCI_CTRL_CBSR |
| ); |
| |
| temp = ohci_readl(®s->cmdstatus); |
| dbg("cmdstatus: 0x%08x SOC=%d%s%s%s%s", temp, |
| (temp & OHCI_SOC) >> 16, |
| (temp & OHCI_OCR) ? " OCR" : "", |
| (temp & OHCI_BLF) ? " BLF" : "", |
| (temp & OHCI_CLF) ? " CLF" : "", |
| (temp & OHCI_HCR) ? " HCR" : "" |
| ); |
| |
| ohci_dump_intr_mask("intrstatus", ohci_readl(®s->intrstatus)); |
| ohci_dump_intr_mask("intrenable", ohci_readl(®s->intrenable)); |
| |
| maybe_print_eds("ed_periodcurrent", |
| ohci_readl(®s->ed_periodcurrent)); |
| |
| maybe_print_eds("ed_controlhead", ohci_readl(®s->ed_controlhead)); |
| maybe_print_eds("ed_controlcurrent", |
| ohci_readl(®s->ed_controlcurrent)); |
| |
| maybe_print_eds("ed_bulkhead", ohci_readl(®s->ed_bulkhead)); |
| maybe_print_eds("ed_bulkcurrent", ohci_readl(®s->ed_bulkcurrent)); |
| |
| maybe_print_eds("donehead", ohci_readl(®s->donehead)); |
| } |
| |
| static void ohci_dump_roothub(ohci_t *controller, int verbose) |
| { |
| __u32 temp, ndp, i; |
| |
| temp = roothub_a(controller); |
| ndp = (temp & RH_A_NDP); |
| #ifdef CONFIG_AT91C_PQFP_UHPBUG |
| ndp = (ndp == 2) ? 1:0; |
| #endif |
| if (verbose) { |
| dbg("roothub.a: %08x POTPGT=%d%s%s%s%s%s NDP=%d", temp, |
| ((temp & RH_A_POTPGT) >> 24) & 0xff, |
| (temp & RH_A_NOCP) ? " NOCP" : "", |
| (temp & RH_A_OCPM) ? " OCPM" : "", |
| (temp & RH_A_DT) ? " DT" : "", |
| (temp & RH_A_NPS) ? " NPS" : "", |
| (temp & RH_A_PSM) ? " PSM" : "", |
| ndp |
| ); |
| temp = roothub_b(controller); |
| dbg("roothub.b: %08x PPCM=%04x DR=%04x", |
| temp, |
| (temp & RH_B_PPCM) >> 16, |
| (temp & RH_B_DR) |
| ); |
| temp = roothub_status(controller); |
| dbg("roothub.status: %08x%s%s%s%s%s%s", |
| temp, |
| (temp & RH_HS_CRWE) ? " CRWE" : "", |
| (temp & RH_HS_OCIC) ? " OCIC" : "", |
| (temp & RH_HS_LPSC) ? " LPSC" : "", |
| (temp & RH_HS_DRWE) ? " DRWE" : "", |
| (temp & RH_HS_OCI) ? " OCI" : "", |
| (temp & RH_HS_LPS) ? " LPS" : "" |
| ); |
| } |
| |
| for (i = 0; i < ndp; i++) { |
| temp = roothub_portstatus(controller, i); |
| dbg("roothub.portstatus [%d] = 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s", |
| i, |
| temp, |
| (temp & RH_PS_PRSC) ? " PRSC" : "", |
| (temp & RH_PS_OCIC) ? " OCIC" : "", |
| (temp & RH_PS_PSSC) ? " PSSC" : "", |
| (temp & RH_PS_PESC) ? " PESC" : "", |
| (temp & RH_PS_CSC) ? " CSC" : "", |
| |
| (temp & RH_PS_LSDA) ? " LSDA" : "", |
| (temp & RH_PS_PPS) ? " PPS" : "", |
| (temp & RH_PS_PRS) ? " PRS" : "", |
| (temp & RH_PS_POCI) ? " POCI" : "", |
| (temp & RH_PS_PSS) ? " PSS" : "", |
| |
| (temp & RH_PS_PES) ? " PES" : "", |
| (temp & RH_PS_CCS) ? " CCS" : "" |
| ); |
| } |
| } |
| |
| static void ohci_dump(ohci_t *controller, int verbose) |
| { |
| dbg("OHCI controller usb-%s state", controller->slot_name); |
| |
| /* dumps some of the state we know about */ |
| ohci_dump_status(controller); |
| if (verbose) |
| ep_print_int_eds(controller, "hcca"); |
| invalidate_dcache_hcca(controller->hcca); |
| dbg("hcca frame #%04x", controller->hcca->frame_no); |
| ohci_dump_roothub(controller, 1); |
| } |
| #endif /* DEBUG */ |
| |
| /*-------------------------------------------------------------------------* |
| * Interface functions (URB) |
| *-------------------------------------------------------------------------*/ |
| |
| /* get a transfer request */ |
| |
| int sohci_submit_job(ohci_t *ohci, ohci_dev_t *ohci_dev, urb_priv_t *urb, |
| struct devrequest *setup) |
| { |
| ed_t *ed; |
| urb_priv_t *purb_priv = urb; |
| int i, size = 0; |
| struct usb_device *dev = urb->dev; |
| unsigned long pipe = urb->pipe; |
| void *buffer = urb->transfer_buffer; |
| int transfer_len = urb->transfer_buffer_length; |
| int interval = urb->interval; |
| |
| /* when controller's hung, permit only roothub cleanup attempts |
| * such as powering down ports */ |
| if (ohci->disabled) { |
| err("sohci_submit_job: EPIPE"); |
| return -1; |
| } |
| |
| /* we're about to begin a new transaction here so mark the |
| * URB unfinished */ |
| urb->finished = 0; |
| |
| /* every endpoint has a ed, locate and fill it */ |
| ed = ep_add_ed(ohci_dev, dev, pipe, interval, 1); |
| if (!ed) { |
| err("sohci_submit_job: ENOMEM"); |
| return -1; |
| } |
| |
| /* for the private part of the URB we need the number of TDs (size) */ |
| switch (usb_pipetype(pipe)) { |
| case PIPE_BULK: /* one TD for every 4096 Byte */ |
| size = (transfer_len - 1) / 4096 + 1; |
| break; |
| case PIPE_CONTROL:/* 1 TD for setup, 1 for ACK and 1 for every 4096 B */ |
| size = (transfer_len == 0)? 2: |
| (transfer_len - 1) / 4096 + 3; |
| break; |
| case PIPE_INTERRUPT: /* 1 TD */ |
| size = 1; |
| break; |
| } |
| |
| ed->purb = urb; |
| |
| if (size >= (N_URB_TD - 1)) { |
| err("need %d TDs, only have %d", size, N_URB_TD); |
| return -1; |
| } |
| purb_priv->pipe = pipe; |
| |
| /* fill the private part of the URB */ |
| purb_priv->length = size; |
| purb_priv->ed = ed; |
| purb_priv->actual_length = 0; |
| |
| /* allocate the TDs */ |
| /* note that td[0] was allocated in ep_add_ed */ |
| for (i = 0; i < size; i++) { |
| purb_priv->td[i] = td_alloc(ohci_dev, dev); |
| if (!purb_priv->td[i]) { |
| purb_priv->length = i; |
| urb_free_priv(purb_priv); |
| err("sohci_submit_job: ENOMEM"); |
| return -1; |
| } |
| } |
| |
| if (ed->state == ED_NEW || (ed->state & ED_DEL)) { |
| urb_free_priv(purb_priv); |
| err("sohci_submit_job: EINVAL"); |
| return -1; |
| } |
| |
| /* link the ed into a chain if is not already */ |
| if (ed->state != ED_OPER) |
| ep_link(ohci, ed); |
| |
| /* fill the TDs and link it to the ed */ |
| td_submit_job(ohci, dev, pipe, buffer, transfer_len, |
| setup, purb_priv, interval); |
| |
| return 0; |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| #ifdef DEBUG |
| /* tell us the current USB frame number */ |
| static int sohci_get_current_frame_number(ohci_t *ohci) |
| { |
| invalidate_dcache_hcca(ohci->hcca); |
| return m16_swap(ohci->hcca->frame_no); |
| } |
| #endif |
| |
| /*-------------------------------------------------------------------------* |
| * ED handling functions |
| *-------------------------------------------------------------------------*/ |
| |
| /* search for the right branch to insert an interrupt ed into the int tree |
| * do some load ballancing; |
| * returns the branch and |
| * sets the interval to interval = 2^integer (ld (interval)) */ |
| |
| static int ep_int_ballance(ohci_t *ohci, int interval, int load) |
| { |
| int i, branch = 0; |
| |
| /* search for the least loaded interrupt endpoint |
| * branch of all 32 branches |
| */ |
| for (i = 0; i < 32; i++) |
| if (ohci->ohci_int_load [branch] > ohci->ohci_int_load [i]) |
| branch = i; |
| |
| branch = branch % interval; |
| for (i = branch; i < 32; i += interval) |
| ohci->ohci_int_load [i] += load; |
| |
| return branch; |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| /* 2^int( ld (inter)) */ |
| |
| static int ep_2_n_interval(int inter) |
| { |
| int i; |
| for (i = 0; ((inter >> i) > 1) && (i < 5); i++); |
| return 1 << i; |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| /* the int tree is a binary tree |
| * in order to process it sequentially the indexes of the branches have to |
| * be mapped the mapping reverses the bits of a word of num_bits length */ |
| static int ep_rev(int num_bits, int word) |
| { |
| int i, wout = 0; |
| |
| for (i = 0; i < num_bits; i++) |
| wout |= (((word >> i) & 1) << (num_bits - i - 1)); |
| return wout; |
| } |
| |
| /*-------------------------------------------------------------------------* |
| * ED handling functions |
| *-------------------------------------------------------------------------*/ |
| |
| /* link an ed into one of the HC chains */ |
| |
| static int ep_link(ohci_t *ohci, ed_t *edi) |
| { |
| volatile ed_t *ed = edi; |
| int int_branch; |
| int i; |
| int inter; |
| int interval; |
| int load; |
| __u32 *ed_p; |
| |
| ed->state = ED_OPER; |
| ed->int_interval = 0; |
| |
| switch (ed->type) { |
| case PIPE_CONTROL: |
| ed->hwNextED = 0; |
| flush_dcache_ed(ed); |
| if (ohci->ed_controltail == NULL) |
| ohci_writel((uintptr_t)ed, &ohci->regs->ed_controlhead); |
| else |
| ohci->ed_controltail->hwNextED = |
| m32_swap((unsigned long)ed); |
| |
| ed->ed_prev = ohci->ed_controltail; |
| if (!ohci->ed_controltail && !ohci->ed_rm_list[0] && |
| !ohci->ed_rm_list[1] && !ohci->sleeping) { |
| ohci->hc_control |= OHCI_CTRL_CLE; |
| ohci_writel(ohci->hc_control, &ohci->regs->control); |
| } |
| ohci->ed_controltail = edi; |
| break; |
| |
| case PIPE_BULK: |
| ed->hwNextED = 0; |
| flush_dcache_ed(ed); |
| if (ohci->ed_bulktail == NULL) |
| ohci_writel((uintptr_t)ed, &ohci->regs->ed_bulkhead); |
| else |
| ohci->ed_bulktail->hwNextED = |
| m32_swap((unsigned long)ed); |
| |
| ed->ed_prev = ohci->ed_bulktail; |
| if (!ohci->ed_bulktail && !ohci->ed_rm_list[0] && |
| !ohci->ed_rm_list[1] && !ohci->sleeping) { |
| ohci->hc_control |= OHCI_CTRL_BLE; |
| ohci_writel(ohci->hc_control, &ohci->regs->control); |
| } |
| ohci->ed_bulktail = edi; |
| break; |
| |
| case PIPE_INTERRUPT: |
| load = ed->int_load; |
| interval = ep_2_n_interval(ed->int_period); |
| ed->int_interval = interval; |
| int_branch = ep_int_ballance(ohci, interval, load); |
| ed->int_branch = int_branch; |
| |
| for (i = 0; i < ep_rev(6, interval); i += inter) { |
| inter = 1; |
| for (ed_p = &(ohci->hcca->int_table[\ |
| ep_rev(5, i) + int_branch]); |
| (*ed_p != 0) && |
| (((ed_t *)ed_p)->int_interval >= interval); |
| ed_p = &(((ed_t *)ed_p)->hwNextED)) |
| inter = ep_rev(6, |
| ((ed_t *)ed_p)->int_interval); |
| ed->hwNextED = *ed_p; |
| flush_dcache_ed(ed); |
| *ed_p = m32_swap((unsigned long)ed); |
| flush_dcache_hcca(ohci->hcca); |
| } |
| break; |
| } |
| return 0; |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| /* scan the periodic table to find and unlink this ED */ |
| static void periodic_unlink(struct ohci *ohci, volatile struct ed *ed, |
| unsigned index, unsigned period) |
| { |
| __maybe_unused unsigned long aligned_ed_p; |
| |
| for (; index < NUM_INTS; index += period) { |
| __u32 *ed_p = &ohci->hcca->int_table [index]; |
| |
| /* ED might have been unlinked through another path */ |
| while (*ed_p != 0) { |
| if (((struct ed *)(uintptr_t) |
| m32_swap((unsigned long)ed_p)) == ed) { |
| *ed_p = ed->hwNextED; |
| aligned_ed_p = (unsigned long)ed_p; |
| aligned_ed_p &= ~(ARCH_DMA_MINALIGN - 1); |
| flush_dcache_range(aligned_ed_p, |
| aligned_ed_p + ARCH_DMA_MINALIGN); |
| break; |
| } |
| ed_p = &(((struct ed *)(uintptr_t) |
| m32_swap((unsigned long)ed_p))->hwNextED); |
| } |
| } |
| } |
| |
| /* unlink an ed from one of the HC chains. |
| * just the link to the ed is unlinked. |
| * the link from the ed still points to another operational ed or 0 |
| * so the HC can eventually finish the processing of the unlinked ed */ |
| |
| static int ep_unlink(ohci_t *ohci, ed_t *edi) |
| { |
| volatile ed_t *ed = edi; |
| int i; |
| |
| ed->hwINFO |= m32_swap(OHCI_ED_SKIP); |
| flush_dcache_ed(ed); |
| |
| switch (ed->type) { |
| case PIPE_CONTROL: |
| if (ed->ed_prev == NULL) { |
| if (!ed->hwNextED) { |
| ohci->hc_control &= ~OHCI_CTRL_CLE; |
| ohci_writel(ohci->hc_control, |
| &ohci->regs->control); |
| } |
| ohci_writel(m32_swap(*((__u32 *)&ed->hwNextED)), |
| &ohci->regs->ed_controlhead); |
| } else { |
| ed->ed_prev->hwNextED = ed->hwNextED; |
| flush_dcache_ed(ed->ed_prev); |
| } |
| if (ohci->ed_controltail == ed) { |
| ohci->ed_controltail = ed->ed_prev; |
| } else { |
| ((ed_t *)(uintptr_t)m32_swap( |
| *((__u32 *)&ed->hwNextED)))->ed_prev = ed->ed_prev; |
| } |
| break; |
| |
| case PIPE_BULK: |
| if (ed->ed_prev == NULL) { |
| if (!ed->hwNextED) { |
| ohci->hc_control &= ~OHCI_CTRL_BLE; |
| ohci_writel(ohci->hc_control, |
| &ohci->regs->control); |
| } |
| ohci_writel(m32_swap(*((__u32 *)&ed->hwNextED)), |
| &ohci->regs->ed_bulkhead); |
| } else { |
| ed->ed_prev->hwNextED = ed->hwNextED; |
| flush_dcache_ed(ed->ed_prev); |
| } |
| if (ohci->ed_bulktail == ed) { |
| ohci->ed_bulktail = ed->ed_prev; |
| } else { |
| ((ed_t *)(uintptr_t)m32_swap( |
| *((__u32 *)&ed->hwNextED)))->ed_prev = ed->ed_prev; |
| } |
| break; |
| |
| case PIPE_INTERRUPT: |
| periodic_unlink(ohci, ed, 0, 1); |
| for (i = ed->int_branch; i < 32; i += ed->int_interval) |
| ohci->ohci_int_load[i] -= ed->int_load; |
| break; |
| } |
| ed->state = ED_UNLINK; |
| return 0; |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| /* add/reinit an endpoint; this should be done once at the |
| * usb_set_configuration command, but the USB stack is a little bit |
| * stateless so we do it at every transaction if the state of the ed |
| * is ED_NEW then a dummy td is added and the state is changed to |
| * ED_UNLINK in all other cases the state is left unchanged the ed |
| * info fields are setted anyway even though most of them should not |
| * change |
| */ |
| static ed_t *ep_add_ed(ohci_dev_t *ohci_dev, struct usb_device *usb_dev, |
| unsigned long pipe, int interval, int load) |
| { |
| td_t *td; |
| ed_t *ed_ret; |
| volatile ed_t *ed; |
| |
| ed = ed_ret = &ohci_dev->ed[(usb_pipeendpoint(pipe) << 1) | |
| (usb_pipecontrol(pipe)? 0: usb_pipeout(pipe))]; |
| |
| if ((ed->state & ED_DEL) || (ed->state & ED_URB_DEL)) { |
| err("ep_add_ed: pending delete"); |
| /* pending delete request */ |
| return NULL; |
| } |
| |
| if (ed->state == ED_NEW) { |
| /* dummy td; end of td list for ed */ |
| td = td_alloc(ohci_dev, usb_dev); |
| ed->hwTailP = m32_swap((unsigned long)td); |
| ed->hwHeadP = ed->hwTailP; |
| ed->state = ED_UNLINK; |
| ed->type = usb_pipetype(pipe); |
| ohci_dev->ed_cnt++; |
| } |
| |
| ed->hwINFO = m32_swap(usb_pipedevice(pipe) |
| | usb_pipeendpoint(pipe) << 7 |
| | (usb_pipeisoc(pipe)? 0x8000: 0) |
| | (usb_pipecontrol(pipe)? 0: \ |
| (usb_pipeout(pipe)? 0x800: 0x1000)) |
| | (usb_dev->speed == USB_SPEED_LOW) << 13 |
| | usb_maxpacket(usb_dev, pipe) << 16); |
| |
| if (ed->type == PIPE_INTERRUPT && ed->state == ED_UNLINK) { |
| ed->int_period = interval; |
| ed->int_load = load; |
| } |
| |
| flush_dcache_ed(ed); |
| |
| return ed_ret; |
| } |
| |
| /*-------------------------------------------------------------------------* |
| * TD handling functions |
| *-------------------------------------------------------------------------*/ |
| |
| /* enqueue next TD for this URB (OHCI spec 5.2.8.2) */ |
| |
| static void td_fill(ohci_t *ohci, unsigned int info, |
| void *data, int len, |
| struct usb_device *dev, int index, urb_priv_t *urb_priv) |
| { |
| volatile td_t *td, *td_pt; |
| #ifdef OHCI_FILL_TRACE |
| int i; |
| #endif |
| |
| if (index > urb_priv->length) { |
| err("index > length"); |
| return; |
| } |
| /* use this td as the next dummy */ |
| td_pt = urb_priv->td [index]; |
| td_pt->hwNextTD = 0; |
| flush_dcache_td(td_pt); |
| |
| /* fill the old dummy TD */ |
| td = urb_priv->td [index] = |
| (td_t *)(uintptr_t) |
| (m32_swap(urb_priv->ed->hwTailP) & ~0xf); |
| |
| td->ed = urb_priv->ed; |
| td->next_dl_td = NULL; |
| td->index = index; |
| td->data = (uintptr_t)data; |
| #ifdef OHCI_FILL_TRACE |
| if (usb_pipebulk(urb_priv->pipe) && usb_pipeout(urb_priv->pipe)) { |
| for (i = 0; i < len; i++) |
| printf("td->data[%d] %#2x ", i, ((unsigned char *)td->data)[i]); |
| printf("\n"); |
| } |
| #endif |
| if (!len) |
| data = 0; |
| |
| td->hwINFO = m32_swap(info); |
| td->hwCBP = m32_swap((unsigned long)data); |
| if (data) |
| td->hwBE = m32_swap((unsigned long)(data + len - 1)); |
| else |
| td->hwBE = 0; |
| |
| td->hwNextTD = m32_swap((unsigned long)td_pt); |
| flush_dcache_td(td); |
| |
| /* append to queue */ |
| td->ed->hwTailP = td->hwNextTD; |
| flush_dcache_ed(td->ed); |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| /* prepare all TDs of a transfer */ |
| |
| static void td_submit_job(ohci_t *ohci, struct usb_device *dev, |
| unsigned long pipe, void *buffer, int transfer_len, |
| struct devrequest *setup, urb_priv_t *urb, |
| int interval) |
| { |
| int data_len = transfer_len; |
| void *data; |
| int cnt = 0; |
| __u32 info = 0; |
| unsigned int toggle = 0; |
| |
| flush_dcache_buffer(buffer, data_len); |
| |
| /* OHCI handles the DATA-toggles itself, we just use the USB-toggle |
| * bits for resetting */ |
| if (usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe))) { |
| toggle = TD_T_TOGGLE; |
| } else { |
| toggle = TD_T_DATA0; |
| usb_settoggle(dev, usb_pipeendpoint(pipe), |
| usb_pipeout(pipe), 1); |
| } |
| urb->td_cnt = 0; |
| if (data_len) |
| data = buffer; |
| else |
| data = 0; |
| |
| switch (usb_pipetype(pipe)) { |
| case PIPE_BULK: |
| info = usb_pipeout(pipe)? |
| TD_CC | TD_DP_OUT : TD_CC | TD_DP_IN ; |
| while (data_len > 4096) { |
| td_fill(ohci, info | (cnt? TD_T_TOGGLE:toggle), |
| data, 4096, dev, cnt, urb); |
| data += 4096; data_len -= 4096; cnt++; |
| } |
| info = usb_pipeout(pipe)? |
| TD_CC | TD_DP_OUT : TD_CC | TD_R | TD_DP_IN ; |
| td_fill(ohci, info | (cnt? TD_T_TOGGLE:toggle), data, |
| data_len, dev, cnt, urb); |
| cnt++; |
| |
| if (!ohci->sleeping) { |
| /* start bulk list */ |
| ohci_writel(OHCI_BLF, &ohci->regs->cmdstatus); |
| } |
| break; |
| |
| case PIPE_CONTROL: |
| /* Setup phase */ |
| info = TD_CC | TD_DP_SETUP | TD_T_DATA0; |
| flush_dcache_buffer(setup, 8); |
| td_fill(ohci, info, setup, 8, dev, cnt++, urb); |
| |
| /* Optional Data phase */ |
| if (data_len > 0) { |
| info = usb_pipeout(pipe)? |
| TD_CC | TD_R | TD_DP_OUT | TD_T_DATA1 : |
| TD_CC | TD_R | TD_DP_IN | TD_T_DATA1; |
| /* NOTE: mishandles transfers >8K, some >4K */ |
| td_fill(ohci, info, data, data_len, dev, cnt++, urb); |
| } |
| |
| /* Status phase */ |
| info = (usb_pipeout(pipe) || data_len == 0) ? |
| TD_CC | TD_DP_IN | TD_T_DATA1: |
| TD_CC | TD_DP_OUT | TD_T_DATA1; |
| td_fill(ohci, info, data, 0, dev, cnt++, urb); |
| |
| if (!ohci->sleeping) { |
| /* start Control list */ |
| ohci_writel(OHCI_CLF, &ohci->regs->cmdstatus); |
| } |
| break; |
| |
| case PIPE_INTERRUPT: |
| info = usb_pipeout(urb->pipe)? |
| TD_CC | TD_DP_OUT | toggle: |
| TD_CC | TD_R | TD_DP_IN | toggle; |
| td_fill(ohci, info, data, data_len, dev, cnt++, urb); |
| break; |
| } |
| if (urb->length != cnt) |
| dbg("TD LENGTH %d != CNT %d", urb->length, cnt); |
| } |
| |
| /*-------------------------------------------------------------------------* |
| * Done List handling functions |
| *-------------------------------------------------------------------------*/ |
| |
| /* calculate the transfer length and update the urb */ |
| |
| static void dl_transfer_length(td_t *td) |
| { |
| __u32 tdBE, tdCBP; |
| urb_priv_t *lurb_priv = td->ed->purb; |
| |
| tdBE = m32_swap(td->hwBE); |
| tdCBP = m32_swap(td->hwCBP); |
| |
| if (!(usb_pipecontrol(lurb_priv->pipe) && |
| ((td->index == 0) || (td->index == lurb_priv->length - 1)))) { |
| if (tdBE != 0) { |
| if (td->hwCBP == 0) |
| lurb_priv->actual_length += tdBE - td->data + 1; |
| else |
| lurb_priv->actual_length += tdCBP - td->data; |
| } |
| } |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| static void check_status(td_t *td_list) |
| { |
| urb_priv_t *lurb_priv = td_list->ed->purb; |
| int urb_len = lurb_priv->length; |
| __u32 *phwHeadP = &td_list->ed->hwHeadP; |
| int cc; |
| |
| cc = TD_CC_GET(m32_swap(td_list->hwINFO)); |
| if (cc) { |
| err(" USB-error: %s (%x)", cc_to_string[cc], cc); |
| |
| invalidate_dcache_ed(td_list->ed); |
| if (*phwHeadP & m32_swap(0x1)) { |
| if (lurb_priv && |
| ((td_list->index + 1) < urb_len)) { |
| *phwHeadP = |
| (lurb_priv->td[urb_len - 1]->hwNextTD &\ |
| m32_swap(0xfffffff0)) | |
| (*phwHeadP & m32_swap(0x2)); |
| |
| lurb_priv->td_cnt += urb_len - |
| td_list->index - 1; |
| } else |
| *phwHeadP &= m32_swap(0xfffffff2); |
| flush_dcache_ed(td_list->ed); |
| } |
| } |
| } |
| |
| /* replies to the request have to be on a FIFO basis so |
| * we reverse the reversed done-list */ |
| static td_t *dl_reverse_done_list(ohci_t *ohci) |
| { |
| uintptr_t td_list_hc; |
| td_t *td_rev = NULL; |
| td_t *td_list = NULL; |
| |
| invalidate_dcache_hcca(ohci->hcca); |
| td_list_hc = m32_swap(ohci->hcca->done_head) & 0xfffffff0; |
| ohci->hcca->done_head = 0; |
| flush_dcache_hcca(ohci->hcca); |
| |
| while (td_list_hc) { |
| td_list = (td_t *)td_list_hc; |
| invalidate_dcache_td(td_list); |
| check_status(td_list); |
| td_list->next_dl_td = td_rev; |
| td_rev = td_list; |
| td_list_hc = m32_swap(td_list->hwNextTD) & 0xfffffff0; |
| } |
| return td_list; |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| /*-------------------------------------------------------------------------*/ |
| |
| static void finish_urb(ohci_t *ohci, urb_priv_t *urb, int status) |
| { |
| if ((status & (ED_OPER | ED_UNLINK)) && (urb->state != URB_DEL)) |
| urb->finished = 1; |
| else |
| dbg("finish_urb: strange.., ED state %x, \n", status); |
| } |
| |
| /* |
| * Used to take back a TD from the host controller. This would normally be |
| * called from within dl_done_list, however it may be called directly if the |
| * HC no longer sees the TD and it has not appeared on the donelist (after |
| * two frames). This bug has been observed on ZF Micro systems. |
| */ |
| static int takeback_td(ohci_t *ohci, td_t *td_list) |
| { |
| ed_t *ed; |
| int cc; |
| int stat = 0; |
| /* urb_t *urb; */ |
| urb_priv_t *lurb_priv; |
| __u32 tdINFO, edHeadP, edTailP; |
| |
| invalidate_dcache_td(td_list); |
| tdINFO = m32_swap(td_list->hwINFO); |
| |
| ed = td_list->ed; |
| lurb_priv = ed->purb; |
| |
| dl_transfer_length(td_list); |
| |
| lurb_priv->td_cnt++; |
| |
| /* error code of transfer */ |
| cc = TD_CC_GET(tdINFO); |
| if (cc) { |
| err("USB-error: %s (%x)", cc_to_string[cc], cc); |
| stat = cc_to_error[cc]; |
| } |
| |
| /* see if this done list makes for all TD's of current URB, |
| * and mark the URB finished if so */ |
| if (lurb_priv->td_cnt == lurb_priv->length) |
| finish_urb(ohci, lurb_priv, ed->state); |
| |
| dbg("dl_done_list: processing TD %x, len %x\n", |
| lurb_priv->td_cnt, lurb_priv->length); |
| |
| if (ed->state != ED_NEW && (!usb_pipeint(lurb_priv->pipe))) { |
| invalidate_dcache_ed(ed); |
| edHeadP = m32_swap(ed->hwHeadP) & 0xfffffff0; |
| edTailP = m32_swap(ed->hwTailP); |
| |
| /* unlink eds if they are not busy */ |
| if ((edHeadP == edTailP) && (ed->state == ED_OPER)) |
| ep_unlink(ohci, ed); |
| } |
| return stat; |
| } |
| |
| static int dl_done_list(ohci_t *ohci) |
| { |
| int stat = 0; |
| td_t *td_list = dl_reverse_done_list(ohci); |
| |
| while (td_list) { |
| td_t *td_next = td_list->next_dl_td; |
| stat = takeback_td(ohci, td_list); |
| td_list = td_next; |
| } |
| return stat; |
| } |
| |
| /*-------------------------------------------------------------------------* |
| * Virtual Root Hub |
| *-------------------------------------------------------------------------*/ |
| |
| #include <usbroothubdes.h> |
| |
| /* Hub class-specific descriptor is constructed dynamically */ |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| #define OK(x) len = (x); break |
| #ifdef DEBUG |
| #define WR_RH_STAT(x) {info("WR:status %#8x", (x)); ohci_writel((x), \ |
| &ohci->regs->roothub.status); } |
| #define WR_RH_PORTSTAT(x) {info("WR:portstatus[%d] %#8x", wIndex-1, \ |
| (x)); ohci_writel((x), &ohci->regs->roothub.portstatus[wIndex-1]); } |
| #else |
| #define WR_RH_STAT(x) ohci_writel((x), &ohci->regs->roothub.status) |
| #define WR_RH_PORTSTAT(x) ohci_writel((x), \ |
| &ohci->regs->roothub.portstatus[wIndex-1]) |
| #endif |
| #define RD_RH_STAT roothub_status(ohci) |
| #define RD_RH_PORTSTAT roothub_portstatus(ohci, wIndex-1) |
| |
| /* request to virtual root hub */ |
| |
| int rh_check_port_status(ohci_t *controller) |
| { |
| __u32 temp, ndp, i; |
| int res; |
| |
| res = -1; |
| temp = roothub_a(controller); |
| ndp = (temp & RH_A_NDP); |
| #ifdef CONFIG_AT91C_PQFP_UHPBUG |
| ndp = (ndp == 2) ? 1:0; |
| #endif |
| for (i = 0; i < ndp; i++) { |
| temp = roothub_portstatus(controller, i); |
| /* check for a device disconnect */ |
| if (((temp & (RH_PS_PESC | RH_PS_CSC)) == |
| (RH_PS_PESC | RH_PS_CSC)) && |
| ((temp & RH_PS_CCS) == 0)) { |
| res = i; |
| break; |
| } |
| } |
| return res; |
| } |
| |
| static int ohci_submit_rh_msg(ohci_t *ohci, struct usb_device *dev, |
| unsigned long pipe, void *buffer, int transfer_len, |
| struct devrequest *cmd) |
| { |
| void *data = buffer; |
| int leni = transfer_len; |
| int len = 0; |
| int stat = 0; |
| __u16 bmRType_bReq; |
| __u16 wValue; |
| __u16 wIndex; |
| __u16 wLength; |
| ALLOC_ALIGN_BUFFER(__u8, databuf, 16, sizeof(u32)); |
| |
| #ifdef DEBUG |
| pkt_print(ohci, NULL, dev, pipe, buffer, transfer_len, |
| cmd, "SUB(rh)", usb_pipein(pipe)); |
| #else |
| ohci_mdelay(1); |
| #endif |
| if (usb_pipeint(pipe)) { |
| info("Root-Hub submit IRQ: NOT implemented"); |
| return 0; |
| } |
| |
| bmRType_bReq = cmd->requesttype | (cmd->request << 8); |
| wValue = le16_to_cpu(cmd->value); |
| wIndex = le16_to_cpu(cmd->index); |
| wLength = le16_to_cpu(cmd->length); |
| |
| info("Root-Hub: adr: %2x cmd(%1x): %08x %04x %04x %04x", |
| dev->devnum, 8, bmRType_bReq, wValue, wIndex, wLength); |
| |
| switch (bmRType_bReq) { |
| /* Request Destination: |
| without flags: Device, |
| RH_INTERFACE: interface, |
| RH_ENDPOINT: endpoint, |
| RH_CLASS means HUB here, |
| RH_OTHER | RH_CLASS almost ever means HUB_PORT here |
| */ |
| |
| case RH_GET_STATUS: |
| *(u16 *)databuf = cpu_to_le16(1); |
| OK(2); |
| case RH_GET_STATUS | RH_INTERFACE: |
| *(u16 *)databuf = cpu_to_le16(0); |
| OK(2); |
| case RH_GET_STATUS | RH_ENDPOINT: |
| *(u16 *)databuf = cpu_to_le16(0); |
| OK(2); |
| case RH_GET_STATUS | RH_CLASS: |
| *(u32 *)databuf = cpu_to_le32( |
| RD_RH_STAT & ~(RH_HS_CRWE | RH_HS_DRWE)); |
| OK(4); |
| case RH_GET_STATUS | RH_OTHER | RH_CLASS: |
| *(u32 *)databuf = cpu_to_le32(RD_RH_PORTSTAT); |
| OK(4); |
| |
| case RH_CLEAR_FEATURE | RH_ENDPOINT: |
| switch (wValue) { |
| case (RH_ENDPOINT_STALL): |
| OK(0); |
| } |
| break; |
| |
| case RH_CLEAR_FEATURE | RH_CLASS: |
| switch (wValue) { |
| case RH_C_HUB_LOCAL_POWER: |
| OK(0); |
| case (RH_C_HUB_OVER_CURRENT): |
| WR_RH_STAT(RH_HS_OCIC); |
| OK(0); |
| } |
| break; |
| |
| case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS: |
| switch (wValue) { |
| case (RH_PORT_ENABLE): WR_RH_PORTSTAT(RH_PS_CCS); OK(0); |
| case (RH_PORT_SUSPEND): WR_RH_PORTSTAT(RH_PS_POCI); OK(0); |
| case (RH_PORT_POWER): WR_RH_PORTSTAT(RH_PS_LSDA); OK(0); |
| case (RH_C_PORT_CONNECTION): WR_RH_PORTSTAT(RH_PS_CSC); OK(0); |
| case (RH_C_PORT_ENABLE): WR_RH_PORTSTAT(RH_PS_PESC); OK(0); |
| case (RH_C_PORT_SUSPEND): WR_RH_PORTSTAT(RH_PS_PSSC); OK(0); |
| case (RH_C_PORT_OVER_CURRENT):WR_RH_PORTSTAT(RH_PS_OCIC); OK(0); |
| case (RH_C_PORT_RESET): WR_RH_PORTSTAT(RH_PS_PRSC); OK(0); |
| } |
| break; |
| |
| case RH_SET_FEATURE | RH_OTHER | RH_CLASS: |
| switch (wValue) { |
| case (RH_PORT_SUSPEND): |
| WR_RH_PORTSTAT(RH_PS_PSS); OK(0); |
| case (RH_PORT_RESET): /* BUG IN HUP CODE *********/ |
| if (RD_RH_PORTSTAT & RH_PS_CCS) |
| WR_RH_PORTSTAT(RH_PS_PRS); |
| OK(0); |
| case (RH_PORT_POWER): |
| WR_RH_PORTSTAT(RH_PS_PPS); |
| OK(0); |
| case (RH_PORT_ENABLE): /* BUG IN HUP CODE *********/ |
| if (RD_RH_PORTSTAT & RH_PS_CCS) |
| WR_RH_PORTSTAT(RH_PS_PES); |
| OK(0); |
| } |
| break; |
| |
| case RH_SET_ADDRESS: |
| ohci->rh.devnum = wValue; |
| OK(0); |
| |
| case RH_GET_DESCRIPTOR: |
| switch ((wValue & 0xff00) >> 8) { |
| case (0x01): /* device descriptor */ |
| len = min_t(unsigned int, |
| leni, |
| min_t(unsigned int, |
| sizeof(root_hub_dev_des), |
| wLength)); |
| databuf = root_hub_dev_des; OK(len); |
| case (0x02): /* configuration descriptor */ |
| len = min_t(unsigned int, |
| leni, |
| min_t(unsigned int, |
| sizeof(root_hub_config_des), |
| wLength)); |
| databuf = root_hub_config_des; OK(len); |
| case (0x03): /* string descriptors */ |
| if (wValue == 0x0300) { |
| len = min_t(unsigned int, |
| leni, |
| min_t(unsigned int, |
| sizeof(root_hub_str_index0), |
| wLength)); |
| databuf = root_hub_str_index0; |
| OK(len); |
| } |
| if (wValue == 0x0301) { |
| len = min_t(unsigned int, |
| leni, |
| min_t(unsigned int, |
| sizeof(root_hub_str_index1), |
| wLength)); |
| databuf = root_hub_str_index1; |
| OK(len); |
| } |
| default: |
| stat = USB_ST_STALLED; |
| } |
| break; |
| |
| case RH_GET_DESCRIPTOR | RH_CLASS: |
| { |
| __u32 temp = roothub_a(ohci); |
| |
| databuf[0] = 9; /* min length; */ |
| databuf[1] = 0x29; |
| databuf[2] = temp & RH_A_NDP; |
| #ifdef CONFIG_AT91C_PQFP_UHPBUG |
| databuf[2] = (databuf[2] == 2) ? 1 : 0; |
| #endif |
| databuf[3] = 0; |
| if (temp & RH_A_PSM) /* per-port power switching? */ |
| databuf[3] |= 0x1; |
| if (temp & RH_A_NOCP) /* no overcurrent reporting? */ |
| databuf[3] |= 0x10; |
| else if (temp & RH_A_OCPM)/* per-port overcurrent reporting? */ |
| databuf[3] |= 0x8; |
| |
| databuf[4] = 0; |
| databuf[5] = (temp & RH_A_POTPGT) >> 24; |
| databuf[6] = 0; |
| temp = roothub_b(ohci); |
| databuf[7] = temp & RH_B_DR; |
| if (databuf[2] < 7) { |
| databuf[8] = 0xff; |
| } else { |
| databuf[0] += 2; |
| databuf[8] = (temp & RH_B_DR) >> 8; |
| databuf[10] = databuf[9] = 0xff; |
| } |
| |
| len = min_t(unsigned int, leni, |
| min_t(unsigned int, databuf[0], wLength)); |
| OK(len); |
| } |
| |
| case RH_GET_CONFIGURATION: |
| databuf[0] = 0x01; |
| OK(1); |
| |
| case RH_SET_CONFIGURATION: |
| WR_RH_STAT(0x10000); |
| OK(0); |
| |
| default: |
| dbg("unsupported root hub command"); |
| stat = USB_ST_STALLED; |
| } |
| |
| #ifdef DEBUG |
| ohci_dump_roothub(ohci, 1); |
| #else |
| ohci_mdelay(1); |
| #endif |
| |
| len = min_t(int, len, leni); |
| if (data != databuf) |
| memcpy(data, databuf, len); |
| dev->act_len = len; |
| dev->status = stat; |
| |
| #ifdef DEBUG |
| pkt_print(ohci, NULL, dev, pipe, buffer, |
| transfer_len, cmd, "RET(rh)", 0/*usb_pipein(pipe)*/); |
| #else |
| ohci_mdelay(1); |
| #endif |
| |
| return stat; |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static ohci_dev_t *ohci_get_ohci_dev(ohci_t *ohci, int devnum, int intr) |
| { |
| int i; |
| |
| if (!intr) |
| return &ohci->ohci_dev; |
| |
| /* First see if we already have an ohci_dev for this dev. */ |
| for (i = 0; i < NUM_INT_DEVS; i++) { |
| if (ohci->int_dev[i].devnum == devnum) |
| return &ohci->int_dev[i]; |
| } |
| |
| /* If not then find a free one. */ |
| for (i = 0; i < NUM_INT_DEVS; i++) { |
| if (ohci->int_dev[i].devnum == -1) { |
| ohci->int_dev[i].devnum = devnum; |
| return &ohci->int_dev[i]; |
| } |
| } |
| |
| printf("ohci: Error out of ohci_devs for interrupt endpoints\n"); |
| return NULL; |
| } |
| |
| /* common code for handling submit messages - used for all but root hub */ |
| /* accesses. */ |
| static urb_priv_t *ohci_alloc_urb(struct usb_device *dev, unsigned long pipe, |
| void *buffer, int transfer_len, int interval) |
| { |
| urb_priv_t *urb; |
| |
| urb = calloc(1, sizeof(urb_priv_t)); |
| if (!urb) { |
| printf("ohci: Error out of memory allocating urb\n"); |
| return NULL; |
| } |
| |
| urb->dev = dev; |
| urb->pipe = pipe; |
| urb->transfer_buffer = buffer; |
| urb->transfer_buffer_length = transfer_len; |
| urb->interval = interval; |
| |
| return urb; |
| } |
| |
| static int submit_common_msg(ohci_t *ohci, struct usb_device *dev, |
| unsigned long pipe, void *buffer, int transfer_len, |
| struct devrequest *setup, int interval) |
| { |
| int stat = 0; |
| int maxsize = usb_maxpacket(dev, pipe); |
| int timeout; |
| urb_priv_t *urb; |
| ohci_dev_t *ohci_dev; |
| |
| urb = ohci_alloc_urb(dev, pipe, buffer, transfer_len, interval); |
| if (!urb) |
| return -ENOMEM; |
| |
| #ifdef DEBUG |
| urb->actual_length = 0; |
| pkt_print(ohci, urb, dev, pipe, buffer, transfer_len, |
| setup, "SUB", usb_pipein(pipe)); |
| #else |
| ohci_mdelay(1); |
| #endif |
| if (!maxsize) { |
| err("submit_common_message: pipesize for pipe %lx is zero", |
| pipe); |
| return -1; |
| } |
| |
| ohci_dev = ohci_get_ohci_dev(ohci, dev->devnum, usb_pipeint(pipe)); |
| if (!ohci_dev) |
| return -ENOMEM; |
| |
| if (sohci_submit_job(ohci, ohci_dev, urb, setup) < 0) { |
| err("sohci_submit_job failed"); |
| return -1; |
| } |
| |
| mdelay(10); |
| /* ohci_dump_status(ohci); */ |
| |
| timeout = USB_TIMEOUT_MS(pipe); |
| |
| /* wait for it to complete */ |
| for (;;) { |
| /* check whether the controller is done */ |
| stat = hc_interrupt(ohci); |
| if (stat < 0) { |
| stat = USB_ST_CRC_ERR; |
| break; |
| } |
| |
| /* NOTE: since we are not interrupt driven in U-Boot and always |
| * handle only one URB at a time, we cannot assume the |
| * transaction finished on the first successful return from |
| * hc_interrupt().. unless the flag for current URB is set, |
| * meaning that all TD's to/from device got actually |
| * transferred and processed. If the current URB is not |
| * finished we need to re-iterate this loop so as |
| * hc_interrupt() gets called again as there needs to be some |
| * more TD's to process still */ |
| if ((stat >= 0) && (stat != 0xff) && (urb->finished)) { |
| /* 0xff is returned for an SF-interrupt */ |
| break; |
| } |
| |
| if (--timeout) { |
| mdelay(1); |
| if (!urb->finished) |
| dbg("*"); |
| |
| } else { |
| if (!usb_pipeint(pipe)) |
| err("CTL:TIMEOUT "); |
| dbg("submit_common_msg: TO status %x\n", stat); |
| urb->finished = 1; |
| stat = USB_ST_CRC_ERR; |
| break; |
| } |
| } |
| |
| dev->status = stat; |
| dev->act_len = urb->actual_length; |
| |
| if (usb_pipein(pipe) && dev->status == 0 && dev->act_len) |
| invalidate_dcache_buffer(buffer, dev->act_len); |
| |
| #ifdef DEBUG |
| pkt_print(ohci, urb, dev, pipe, buffer, transfer_len, |
| setup, "RET(ctlr)", usb_pipein(pipe)); |
| #else |
| ohci_mdelay(1); |
| #endif |
| urb_free_priv(urb); |
| return 0; |
| } |
| |
| #define MAX_INT_QUEUESIZE 8 |
| |
| struct int_queue { |
| int queuesize; |
| int curr_urb; |
| urb_priv_t *urb[MAX_INT_QUEUESIZE]; |
| }; |
| |
| static struct int_queue *_ohci_create_int_queue(ohci_t *ohci, |
| struct usb_device *udev, unsigned long pipe, int queuesize, |
| int elementsize, void *buffer, int interval) |
| { |
| struct int_queue *queue; |
| ohci_dev_t *ohci_dev; |
| int i; |
| |
| if (queuesize > MAX_INT_QUEUESIZE) |
| return NULL; |
| |
| ohci_dev = ohci_get_ohci_dev(ohci, udev->devnum, 1); |
| if (!ohci_dev) |
| return NULL; |
| |
| queue = malloc(sizeof(*queue)); |
| if (!queue) { |
| printf("ohci: Error out of memory allocating int queue\n"); |
| return NULL; |
| } |
| |
| for (i = 0; i < queuesize; i++) { |
| queue->urb[i] = ohci_alloc_urb(udev, pipe, |
| buffer + i * elementsize, |
| elementsize, interval); |
| if (!queue->urb[i]) |
| break; |
| |
| if (sohci_submit_job(ohci, ohci_dev, queue->urb[i], NULL)) { |
| printf("ohci: Error submitting int queue job\n"); |
| urb_free_priv(queue->urb[i]); |
| break; |
| } |
| } |
| if (i == 0) { |
| /* We did not succeed in submitting even 1 urb */ |
| free(queue); |
| return NULL; |
| } |
| |
| queue->queuesize = i; |
| queue->curr_urb = 0; |
| |
| return queue; |
| } |
| |
| static void *_ohci_poll_int_queue(ohci_t *ohci, struct usb_device *udev, |
| struct int_queue *queue) |
| { |
| if (queue->curr_urb == queue->queuesize) |
| return NULL; /* Queue depleted */ |
| |
| if (hc_interrupt(ohci) < 0) |
| return NULL; |
| |
| if (queue->urb[queue->curr_urb]->finished) { |
| void *ret = queue->urb[queue->curr_urb]->transfer_buffer; |
| queue->curr_urb++; |
| return ret; |
| } |
| |
| return NULL; |
| } |
| |
| static int _ohci_destroy_int_queue(ohci_t *ohci, struct usb_device *dev, |
| struct int_queue *queue) |
| { |
| int i; |
| |
| for (i = 0; i < queue->queuesize; i++) |
| urb_free_priv(queue->urb[i]); |
| |
| free(queue); |
| |
| return 0; |
| } |
| |
| #if !CONFIG_IS_ENABLED(DM_USB) |
| /* submit routines called from usb.c */ |
| int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer, |
| int transfer_len) |
| { |
| info("submit_bulk_msg"); |
| return submit_common_msg(&gohci, dev, pipe, buffer, transfer_len, |
| NULL, 0); |
| } |
| |
| int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer, |
| int transfer_len, int interval, bool nonblock) |
| { |
| info("submit_int_msg"); |
| return submit_common_msg(&gohci, dev, pipe, buffer, transfer_len, NULL, |
| interval); |
| } |
| |
| struct int_queue *create_int_queue(struct usb_device *dev, |
| unsigned long pipe, int queuesize, int elementsize, |
| void *buffer, int interval) |
| { |
| return _ohci_create_int_queue(&gohci, dev, pipe, queuesize, |
| elementsize, buffer, interval); |
| } |
| |
| void *poll_int_queue(struct usb_device *dev, struct int_queue *queue) |
| { |
| return _ohci_poll_int_queue(&gohci, dev, queue); |
| } |
| |
| int destroy_int_queue(struct usb_device *dev, struct int_queue *queue) |
| { |
| return _ohci_destroy_int_queue(&gohci, dev, queue); |
| } |
| #endif |
| |
| static int _ohci_submit_control_msg(ohci_t *ohci, struct usb_device *dev, |
| unsigned long pipe, void *buffer, int transfer_len, |
| struct devrequest *setup) |
| { |
| int maxsize = usb_maxpacket(dev, pipe); |
| |
| info("submit_control_msg"); |
| #ifdef DEBUG |
| pkt_print(ohci, NULL, dev, pipe, buffer, transfer_len, |
| setup, "SUB", usb_pipein(pipe)); |
| #else |
| ohci_mdelay(1); |
| #endif |
| if (!maxsize) { |
| err("submit_control_message: pipesize for pipe %lx is zero", |
| pipe); |
| return -1; |
| } |
| if (((pipe >> 8) & 0x7f) == ohci->rh.devnum) { |
| ohci->rh.dev = dev; |
| /* root hub - redirect */ |
| return ohci_submit_rh_msg(ohci, dev, pipe, buffer, |
| transfer_len, setup); |
| } |
| |
| return submit_common_msg(ohci, dev, pipe, buffer, transfer_len, |
| setup, 0); |
| } |
| |
| /*-------------------------------------------------------------------------* |
| * HC functions |
| *-------------------------------------------------------------------------*/ |
| |
| /* reset the HC and BUS */ |
| |
| static int hc_reset(ohci_t *ohci) |
| { |
| #ifdef CONFIG_PCI_EHCI_DEVNO |
| pci_dev_t pdev; |
| #endif |
| int timeout = 30; |
| int smm_timeout = 50; /* 0,5 sec */ |
| |
| dbg("%s\n", __FUNCTION__); |
| |
| #ifdef CONFIG_PCI_EHCI_DEVNO |
| /* |
| * Some multi-function controllers (e.g. ISP1562) allow root hub |
| * resetting via EHCI registers only. |
| */ |
| pdev = pci_find_devices(ehci_pci_ids, CONFIG_PCI_EHCI_DEVNO); |
| if (pdev != -1) { |
| u32 base; |
| int timeout = 1000; |
| |
| pci_read_config_dword(pdev, PCI_BASE_ADDRESS_0, &base); |
| base += EHCI_USBCMD_OFF; |
| ohci_writel(ohci_readl(base) | EHCI_USBCMD_HCRESET, base); |
| |
| while (ohci_readl(base) & EHCI_USBCMD_HCRESET) { |
| if (timeout-- <= 0) { |
| printf("USB RootHub reset timed out!"); |
| break; |
| } |
| udelay(1); |
| } |
| } else |
| printf("No EHCI func at %d index!\n", CONFIG_PCI_EHCI_DEVNO); |
| #endif |
| if (ohci_readl(&ohci->regs->control) & OHCI_CTRL_IR) { |
| /* SMM owns the HC, request ownership */ |
| ohci_writel(OHCI_OCR, &ohci->regs->cmdstatus); |
| info("USB HC TakeOver from SMM"); |
| while (ohci_readl(&ohci->regs->control) & OHCI_CTRL_IR) { |
| mdelay(10); |
| if (--smm_timeout == 0) { |
| err("USB HC TakeOver failed!"); |
| return -1; |
| } |
| } |
| } |
| |
| /* Disable HC interrupts */ |
| ohci_writel(OHCI_INTR_MIE, &ohci->regs->intrdisable); |
| |
| dbg("USB HC reset_hc usb-%s: ctrl = 0x%X ;\n", |
| ohci->slot_name, |
| ohci_readl(&ohci->regs->control)); |
| |
| /* Reset USB (needed by some controllers) */ |
| ohci->hc_control = 0; |
| ohci_writel(ohci->hc_control, &ohci->regs->control); |
| |
| /* HC Reset requires max 10 us delay */ |
| ohci_writel(OHCI_HCR, &ohci->regs->cmdstatus); |
| while ((ohci_readl(&ohci->regs->cmdstatus) & OHCI_HCR) != 0) { |
| if (--timeout == 0) { |
| err("USB HC reset timed out!"); |
| return -1; |
| } |
| udelay(1); |
| } |
| return 0; |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| /* Start an OHCI controller, set the BUS operational |
| * enable interrupts |
| * connect the virtual root hub */ |
| |
| static int hc_start(ohci_t *ohci) |
| { |
| __u32 mask; |
| unsigned int fminterval; |
| int i; |
| |
| ohci->disabled = 1; |
| for (i = 0; i < NUM_INT_DEVS; i++) |
| ohci->int_dev[i].devnum = -1; |
| |
| /* Tell the controller where the control and bulk lists are |
| * The lists are empty now. */ |
| |
| ohci_writel(0, &ohci->regs->ed_controlhead); |
| ohci_writel(0, &ohci->regs->ed_bulkhead); |
| |
| ohci_writel((uintptr_t)ohci->hcca, |
| &ohci->regs->hcca); /* reset clears this */ |
| |
| fminterval = 0x2edf; |
| ohci_writel((fminterval * 9) / 10, &ohci->regs->periodicstart); |
| fminterval |= ((((fminterval - 210) * 6) / 7) << 16); |
| ohci_writel(fminterval, &ohci->regs->fminterval); |
| ohci_writel(0x628, &ohci->regs->lsthresh); |
| |
| /* start controller operations */ |
| ohci->hc_control = OHCI_CONTROL_INIT | OHCI_USB_OPER; |
| ohci->disabled = 0; |
| ohci_writel(ohci->hc_control, &ohci->regs->control); |
| |
| /* disable all interrupts */ |
| mask = (OHCI_INTR_SO | OHCI_INTR_WDH | OHCI_INTR_SF | OHCI_INTR_RD | |
| OHCI_INTR_UE | OHCI_INTR_FNO | OHCI_INTR_RHSC | |
| OHCI_INTR_OC | OHCI_INTR_MIE); |
| ohci_writel(mask, &ohci->regs->intrdisable); |
| /* clear all interrupts */ |
| mask &= ~OHCI_INTR_MIE; |
| ohci_writel(mask, &ohci->regs->intrstatus); |
| /* Choose the interrupts we care about now - but w/o MIE */ |
| mask = OHCI_INTR_RHSC | OHCI_INTR_UE | OHCI_INTR_WDH | OHCI_INTR_SO; |
| ohci_writel(mask, &ohci->regs->intrenable); |
| |
| #ifdef OHCI_USE_NPS |
| /* required for AMD-756 and some Mac platforms */ |
| ohci_writel((roothub_a(ohci) | RH_A_NPS) & ~RH_A_PSM, |
| &ohci->regs->roothub.a); |
| ohci_writel(RH_HS_LPSC, &ohci->regs->roothub.status); |
| #endif /* OHCI_USE_NPS */ |
| |
| /* connect the virtual root hub */ |
| ohci->rh.devnum = 0; |
| |
| return 0; |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| /* an interrupt happens */ |
| |
| static int hc_interrupt(ohci_t *ohci) |
| { |
| struct ohci_regs *regs = ohci->regs; |
| int ints; |
| int stat = -1; |
| |
| invalidate_dcache_hcca(ohci->hcca); |
| |
| if ((ohci->hcca->done_head != 0) && |
| !(m32_swap(ohci->hcca->done_head) & 0x01)) { |
| ints = OHCI_INTR_WDH; |
| } else { |
| ints = ohci_readl(®s->intrstatus); |
| if (ints == ~(u32)0) { |
| ohci->disabled++; |
| err("%s device removed!", ohci->slot_name); |
| return -1; |
| } else { |
| ints &= ohci_readl(®s->intrenable); |
| if (ints == 0) { |
| dbg("hc_interrupt: returning..\n"); |
| return 0xff; |
| } |
| } |
| } |
| |
| /* dbg("Interrupt: %x frame: %x", ints, |
| le16_to_cpu(ohci->hcca->frame_no)); */ |
| |
| if (ints & OHCI_INTR_RHSC) |
| stat = 0xff; |
| |
| if (ints & OHCI_INTR_UE) { |
| ohci->disabled++; |
| err("OHCI Unrecoverable Error, controller usb-%s disabled", |
| ohci->slot_name); |
| /* e.g. due to PCI Master/Target Abort */ |
| |
| #ifdef DEBUG |
| ohci_dump(ohci, 1); |
| #else |
| ohci_mdelay(1); |
| #endif |
| /* FIXME: be optimistic, hope that bug won't repeat often. */ |
| /* Make some non-interrupt context restart the controller. */ |
| /* Count and limit the retries though; either hardware or */ |
| /* software errors can go forever... */ |
| hc_reset(ohci); |
| return -1; |
| } |
| |
| if (ints & OHCI_INTR_WDH) { |
| ohci_mdelay(1); |
| ohci_writel(OHCI_INTR_WDH, ®s->intrdisable); |
| (void)ohci_readl(®s->intrdisable); /* flush */ |
| stat = dl_done_list(ohci); |
| ohci_writel(OHCI_INTR_WDH, ®s->intrenable); |
| (void)ohci_readl(®s->intrdisable); /* flush */ |
| } |
| |
| if (ints & OHCI_INTR_SO) { |
| dbg("USB Schedule overrun\n"); |
| ohci_writel(OHCI_INTR_SO, ®s->intrenable); |
| stat = -1; |
| } |
| |
| /* FIXME: this assumes SOF (1/ms) interrupts don't get lost... */ |
| if (ints & OHCI_INTR_SF) { |
| unsigned int frame = m16_swap(ohci->hcca->frame_no) & 1; |
| mdelay(1); |
| ohci_writel(OHCI_INTR_SF, ®s->intrdisable); |
| if (ohci->ed_rm_list[frame] != NULL) |
| ohci_writel(OHCI_INTR_SF, ®s->intrenable); |
| stat = 0xff; |
| } |
| |
| ohci_writel(ints, ®s->intrstatus); |
| return stat; |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| #if !CONFIG_IS_ENABLED(DM_USB) |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| /* De-allocate all resources.. */ |
| |
| static void hc_release_ohci(ohci_t *ohci) |
| { |
| dbg("USB HC release ohci usb-%s", ohci->slot_name); |
| |
| if (!ohci->disabled) |
| hc_reset(ohci); |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| /* |
| * low level initalisation routine, called from usb.c |
| */ |
| static char ohci_inited = 0; |
| |
| int usb_lowlevel_init(int index, enum usb_init_type init, void **controller) |
| { |
| memset(&gohci, 0, sizeof(ohci_t)); |
| |
| /* align the storage */ |
| if ((__u32)&ghcca[0] & 0xff) { |
| err("HCCA not aligned!!"); |
| return -1; |
| } |
| gohci.hcca = &ghcca[0]; |
| info("aligned ghcca %p", gohci.hcca); |
| memset(gohci.hcca, 0, sizeof(struct ohci_hcca)); |
| |
| gohci.disabled = 1; |
| gohci.sleeping = 0; |
| gohci.irq = -1; |
| gohci.regs = (struct ohci_regs *)CFG_SYS_USB_OHCI_REGS_BASE; |
| |
| gohci.flags = 0; |
| gohci.slot_name = CONFIG_SYS_USB_OHCI_SLOT_NAME; |
| |
| if (hc_reset (&gohci) < 0) { |
| hc_release_ohci (&gohci); |
| err ("can't reset usb-%s", gohci.slot_name); |
| return -1; |
| } |
| |
| if (hc_start(&gohci) < 0) { |
| err("can't start usb-%s", gohci.slot_name); |
| hc_release_ohci(&gohci); |
| /* Initialization failed */ |
| return -1; |
| } |
| |
| #ifdef DEBUG |
| ohci_dump(&gohci, 1); |
| #else |
| ohci_mdelay(1); |
| #endif |
| ohci_inited = 1; |
| return 0; |
| } |
| |
| int usb_lowlevel_stop(int index) |
| { |
| /* this gets called really early - before the controller has */ |
| /* even been initialized! */ |
| if (!ohci_inited) |
| return 0; |
| /* TODO release any interrupts, etc. */ |
| /* call hc_release_ohci() here ? */ |
| hc_reset(&gohci); |
| |
| /* This driver is no longer initialised. It needs a new low-level |
| * init (board/cpu) before it can be used again. */ |
| ohci_inited = 0; |
| return 0; |
| } |
| |
| int submit_control_msg(struct usb_device *dev, unsigned long pipe, |
| void *buffer, int transfer_len, struct devrequest *setup) |
| { |
| return _ohci_submit_control_msg(&gohci, dev, pipe, buffer, |
| transfer_len, setup); |
| } |
| #endif |
| |
| #if CONFIG_IS_ENABLED(DM_USB) |
| static int ohci_submit_control_msg(struct udevice *dev, struct usb_device *udev, |
| unsigned long pipe, void *buffer, int length, |
| struct devrequest *setup) |
| { |
| ohci_t *ohci = dev_get_priv(usb_get_bus(dev)); |
| |
| return _ohci_submit_control_msg(ohci, udev, pipe, buffer, |
| length, setup); |
| } |
| |
| static int ohci_submit_bulk_msg(struct udevice *dev, struct usb_device *udev, |
| unsigned long pipe, void *buffer, int length) |
| { |
| ohci_t *ohci = dev_get_priv(usb_get_bus(dev)); |
| |
| return submit_common_msg(ohci, udev, pipe, buffer, length, NULL, 0); |
| } |
| |
| static int ohci_submit_int_msg(struct udevice *dev, struct usb_device *udev, |
| unsigned long pipe, void *buffer, int length, |
| int interval, bool nonblock) |
| { |
| ohci_t *ohci = dev_get_priv(usb_get_bus(dev)); |
| |
| return submit_common_msg(ohci, udev, pipe, buffer, length, |
| NULL, interval); |
| } |
| |
| static struct int_queue *ohci_create_int_queue(struct udevice *dev, |
| struct usb_device *udev, unsigned long pipe, int queuesize, |
| int elementsize, void *buffer, int interval) |
| { |
| ohci_t *ohci = dev_get_priv(usb_get_bus(dev)); |
| |
| return _ohci_create_int_queue(ohci, udev, pipe, queuesize, elementsize, |
| buffer, interval); |
| } |
| |
| static void *ohci_poll_int_queue(struct udevice *dev, struct usb_device *udev, |
| struct int_queue *queue) |
| { |
| ohci_t *ohci = dev_get_priv(usb_get_bus(dev)); |
| |
| return _ohci_poll_int_queue(ohci, udev, queue); |
| } |
| |
| static int ohci_destroy_int_queue(struct udevice *dev, struct usb_device *udev, |
| struct int_queue *queue) |
| { |
| ohci_t *ohci = dev_get_priv(usb_get_bus(dev)); |
| |
| return _ohci_destroy_int_queue(ohci, udev, queue); |
| } |
| |
| int ohci_register(struct udevice *dev, struct ohci_regs *regs) |
| { |
| struct usb_bus_priv *priv = dev_get_uclass_priv(dev); |
| ohci_t *ohci = dev_get_priv(dev); |
| u32 reg; |
| |
| priv->desc_before_addr = true; |
| |
| ohci->regs = regs; |
| ohci->hcca = memalign(256, sizeof(struct ohci_hcca)); |
| if (!ohci->hcca) |
| return -ENOMEM; |
| memset(ohci->hcca, 0, sizeof(struct ohci_hcca)); |
| flush_dcache_hcca(ohci->hcca); |
| |
| if (hc_reset(ohci) < 0) |
| return -EIO; |
| |
| if (hc_start(ohci) < 0) |
| return -EIO; |
| |
| reg = ohci_readl(®s->revision); |
| printf("USB OHCI %x.%x\n", (reg >> 4) & 0xf, reg & 0xf); |
| |
| return 0; |
| } |
| |
| int ohci_deregister(struct udevice *dev) |
| { |
| ohci_t *ohci = dev_get_priv(dev); |
| |
| if (hc_reset(ohci) < 0) |
| return -EIO; |
| |
| free(ohci->hcca); |
| |
| return 0; |
| } |
| |
| struct dm_usb_ops ohci_usb_ops = { |
| .control = ohci_submit_control_msg, |
| .bulk = ohci_submit_bulk_msg, |
| .interrupt = ohci_submit_int_msg, |
| .create_int_queue = ohci_create_int_queue, |
| .poll_int_queue = ohci_poll_int_queue, |
| .destroy_int_queue = ohci_destroy_int_queue, |
| }; |
| |
| #endif |