| if ARCH_OMAP2PLUS |
| |
| choice |
| prompt "OMAP2+ platform select" |
| default OMAP34XX |
| |
| config OMAP34XX |
| bool "OMAP34XX SoC" |
| select ARM_CORTEX_A8_CVE_2017_5715 |
| select ARM_ERRATA_430973 |
| select ARM_ERRATA_454179 |
| select ARM_ERRATA_621766 |
| select ARM_ERRATA_725233 |
| select SPL_USE_TINY_PRINTF if SPL |
| imply NAND_OMAP_GPMC |
| imply SPL_FS_EXT4 |
| imply SPL_FS_FAT |
| imply SPL_GPIO |
| imply SPL_I2C |
| imply SPL_LIBCOMMON_SUPPORT |
| imply SPL_LIBDISK_SUPPORT |
| imply SPL_LIBGENERIC_SUPPORT |
| imply SPL_MMC |
| imply SPL_NAND_SUPPORT |
| imply SPL_OMAP3_ID_NAND |
| imply SPL_POWER |
| imply SPL_SERIAL |
| imply SYS_I2C_OMAP24XX |
| imply SYS_THUMB_BUILD |
| imply TWL4030_POWER |
| |
| config OMAP54XX |
| bool "OMAP54XX SoC" |
| select ARM_CORTEX_A15_CVE_2017_5715 |
| select ARM_ERRATA_798870 |
| select DM_EVENT |
| select SYS_THUMB_BUILD |
| imply NAND_OMAP_ELM |
| imply NAND_OMAP_GPMC |
| imply SPL_DISPLAY_PRINT |
| imply SPL_ENV_SUPPORT |
| imply SPL_FS_EXT4 |
| imply SPL_FS_FAT |
| imply SPL_GPIO |
| imply SPL_I2C |
| imply SPL_LIBCOMMON_SUPPORT |
| imply SPL_LIBDISK_SUPPORT |
| imply SPL_LIBGENERIC_SUPPORT |
| imply SPL_MMC |
| imply SPL_NAND_AM33XX_BCH |
| imply SPL_NAND_AM33XX_BCH |
| imply SPL_NAND_SUPPORT |
| imply SPL_POWER |
| imply SPL_SERIAL |
| imply SYS_I2C_OMAP24XX |
| |
| config AM43XX |
| bool "AM43XX SoC" |
| select SPECIFY_CONSOLE_INDEX |
| select SYS_L2_PL310 if !SYS_L2CACHE_OFF |
| imply NAND_OMAP_ELM |
| imply NAND_OMAP_GPMC |
| imply SPL_DM |
| imply SPL_DM_SEQ_ALIAS |
| imply SPL_NAND_AM33XX_BCH |
| imply SPL_NAND_SUPPORT |
| imply SPL_OF_CONTROL |
| imply SPL_OF_TRANSLATE |
| imply SPL_SEPARATE_BSS |
| imply SPL_SYS_MALLOC_SIMPLE |
| imply SYS_I2C_OMAP24XX |
| imply SYS_THUMB_BUILD |
| help |
| Support for AM43xx SOC from Texas Instruments. |
| The AM43xx high performance SOC features a Cortex-A9 |
| ARM core, a quad core PRU-ICSS for industrial Ethernet |
| protocols, dual camera support, optional 3D graphics |
| and an optional customer programmable secure boot. |
| |
| config AM33XX |
| bool "AM33XX SoC" |
| select ARM_CORTEX_A8_CVE_2017_5715 |
| select DM_EVENT |
| select SPECIFY_CONSOLE_INDEX |
| imply NAND_OMAP_ELM |
| imply NAND_OMAP_GPMC |
| imply SKIP_LOWLEVEL_INIT |
| imply SPL_NAND_AM33XX_BCH |
| imply SPL_NAND_SUPPORT |
| imply SYS_I2C_OMAP24XX |
| imply SYS_THUMB_BUILD |
| imply SPL_USE_TINY_PRINTF |
| help |
| Support for AM335x SOC from Texas Instruments. |
| The AM335x high performance SOC features a Cortex-A8 |
| ARM core, a dual core PRU-ICSS for industrial Ethernet |
| protocols, optional 3D graphics and an optional customer |
| programmable secure boot. |
| |
| endchoice |
| |
| config SYS_MPUCLK |
| int "MPU CLK speed" |
| depends on AM33XX |
| default 500 |
| help |
| Defines the MPU clock speed (in MHz). |
| |
| config SYS_OMAP_ABE_SYSCK |
| bool |
| |
| config TI_SECURE_EMIF_REGION_START |
| hex "Reserved EMIF region start address" |
| depends on TI_SECURE_DEVICE |
| default 0x0 |
| help |
| Reserved EMIF region start address. Set to "0" to auto-select |
| to be at the end of the external memory region. |
| |
| config TI_SECURE_EMIF_TOTAL_REGION_SIZE |
| hex "Reserved EMIF region size" |
| depends on TI_SECURE_DEVICE |
| default 0x0 |
| help |
| Total reserved EMIF region size. Default is 0, which means no reserved EMIF |
| region on secure devices. |
| |
| config TI_SECURE_EMIF_PROTECTED_REGION_SIZE |
| hex "Size of protected region within reserved EMIF region" |
| depends on TI_SECURE_DEVICE |
| default 0x0 |
| help |
| This config option is used to specify the size of the portion of the total |
| reserved EMIF region set aside for secure OS needs that will be protected |
| using hardware memory firewalls. This value must be smaller than the |
| TI_SECURE_EMIF_TOTAL_REGION_SIZE value. |
| |
| config SYS_AUTOMATIC_SDRAM_DETECTION |
| bool |
| |
| choice |
| depends on OMAP54XX |
| prompt "Static or dynamic DDR timing calculations" |
| default SYS_EMIF_PRECALCULATED_TIMING_REGS |
| help |
| For the DDR timing information we can either dynamically determine |
| the timings to use or use pre-determined timings (based on using the |
| dynamic method). Default to the static timing information. |
| |
| config SYS_EMIF_PRECALCULATED_TIMING_REGS |
| bool "Use precalcualted timing values" |
| |
| config SYS_DEFAULT_LPDDR2_TIMINGS |
| bool "Use default LPDDR2 timing values" |
| select SYS_AUTOMATIC_SDRAM_DETECTION |
| |
| endchoice |
| |
| source "arch/arm/mach-omap2/omap3/Kconfig" |
| |
| source "arch/arm/mach-omap2/omap5/Kconfig" |
| |
| source "arch/arm/mach-omap2/am33xx/Kconfig" |
| |
| source "board/BuR/brxre1/Kconfig" |
| source "board/BuR/brsmarc1/Kconfig" |
| source "board/BuR/brppt1/Kconfig" |
| source "board/siemens/draco/Kconfig" |
| source "board/siemens/pxm2/Kconfig" |
| source "board/siemens/rut/Kconfig" |
| source "board/ti/am43xx/Kconfig" |
| source "board/ti/am335x/Kconfig" |
| source "board/compulab/cm_t43/Kconfig" |
| source "board/phytec/phycore_am335x_r2/Kconfig" |
| |
| endif |