| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2018 Texas Instruments, Inc |
| */ |
| |
| #include <dm.h> |
| #include <log.h> |
| #include <pci.h> |
| #include <generic-phy.h> |
| #include <power-domain.h> |
| #include <regmap.h> |
| #include <syscon.h> |
| #include <asm/global_data.h> |
| #include <asm/io.h> |
| #include <asm-generic/gpio.h> |
| #include <dm/device_compat.h> |
| #include <linux/bitops.h> |
| #include <linux/delay.h> |
| #include <linux/err.h> |
| |
| #include "pcie_dw_common.h" |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| #define PCIE_VENDORID_MASK GENMASK(15, 0) |
| #define PCIE_DEVICEID_SHIFT 16 |
| |
| #define PCIE_LINK_CAPABILITY 0x7c |
| #define PCIE_LINK_CTL_2 0xa0 |
| #define TARGET_LINK_SPEED_MASK 0xf |
| #define LINK_SPEED_GEN_1 0x1 |
| #define LINK_SPEED_GEN_2 0x2 |
| #define LINK_SPEED_GEN_3 0x3 |
| |
| #define PCIE_MISC_CONTROL_1_OFF 0x8bc |
| #define PCIE_DBI_RO_WR_EN BIT(0) |
| |
| #define PLR_OFFSET 0x700 |
| #define PCIE_PORT_DEBUG0 (PLR_OFFSET + 0x28) |
| #define PORT_LOGIC_LTSSM_STATE_MASK 0x1f |
| #define PORT_LOGIC_LTSSM_STATE_L0 0x11 |
| |
| #define PCIE_LINK_UP_TIMEOUT_MS 100 |
| |
| /* Offsets from App base */ |
| #define PCIE_CMD_STATUS 0x04 |
| #define LTSSM_EN_VAL BIT(0) |
| |
| |
| #define AM654_PCIE_DEV_TYPE_MASK 0x3 |
| #define EP 0x0 |
| #define LEG_EP 0x1 |
| #define RC 0x2 |
| |
| /** |
| * struct pcie_dw_ti - TI DW PCIe controller state |
| * |
| * @pci: The common PCIe DW structure |
| * @app_base: The base address of application register space |
| */ |
| struct pcie_dw_ti { |
| /* Must be first member of the struct */ |
| struct pcie_dw dw; |
| void *app_base; |
| }; |
| |
| enum dw_pcie_device_mode { |
| DW_PCIE_UNKNOWN_TYPE, |
| DW_PCIE_EP_TYPE, |
| DW_PCIE_LEG_EP_TYPE, |
| DW_PCIE_RC_TYPE, |
| }; |
| |
| /** |
| * pcie_dw_configure() - Configure link capabilities and speed |
| * |
| * @regs_base: A pointer to the PCIe controller registers |
| * @cap_speed: The capabilities and speed to configure |
| * |
| * Configure the link capabilities and speed in the PCIe root complex. |
| */ |
| static void pcie_dw_configure(struct pcie_dw_ti *pci, u32 cap_speed) |
| { |
| u32 val; |
| |
| dw_pcie_dbi_write_enable(&pci->dw, true); |
| |
| val = readl(pci->dw.dbi_base + PCIE_LINK_CAPABILITY); |
| val &= ~TARGET_LINK_SPEED_MASK; |
| val |= cap_speed; |
| writel(val, pci->dw.dbi_base + PCIE_LINK_CAPABILITY); |
| |
| val = readl(pci->dw.dbi_base + PCIE_LINK_CTL_2); |
| val &= ~TARGET_LINK_SPEED_MASK; |
| val |= cap_speed; |
| writel(val, pci->dw.dbi_base + PCIE_LINK_CTL_2); |
| |
| dw_pcie_dbi_write_enable(&pci->dw, false); |
| } |
| |
| /** |
| * is_link_up() - Return the link state |
| * |
| * @regs_base: A pointer to the PCIe DBICS registers |
| * |
| * Return: 1 (true) for active line and 0 (false) for no link |
| */ |
| static int is_link_up(struct pcie_dw_ti *pci) |
| { |
| u32 val; |
| |
| val = readl(pci->dw.dbi_base + PCIE_PORT_DEBUG0); |
| val &= PORT_LOGIC_LTSSM_STATE_MASK; |
| |
| return (val == PORT_LOGIC_LTSSM_STATE_L0); |
| } |
| |
| /** |
| * wait_link_up() - Wait for the link to come up |
| * |
| * @regs_base: A pointer to the PCIe controller registers |
| * |
| * Return: 1 (true) for active line and 0 (false) for no link (timeout) |
| */ |
| static int wait_link_up(struct pcie_dw_ti *pci) |
| { |
| unsigned long timeout; |
| |
| timeout = get_timer(0) + PCIE_LINK_UP_TIMEOUT_MS; |
| while (!is_link_up(pci)) { |
| if (get_timer(0) > timeout) |
| return 0; |
| }; |
| |
| return 1; |
| } |
| |
| static int pcie_dw_ti_pcie_link_up(struct pcie_dw_ti *pci, u32 cap_speed) |
| { |
| u32 val; |
| |
| if (is_link_up(pci)) { |
| printf("PCI Link already up before configuration!\n"); |
| return 1; |
| } |
| |
| /* DW pre link configurations */ |
| pcie_dw_configure(pci, cap_speed); |
| |
| /* Initiate link training */ |
| val = readl(pci->app_base + PCIE_CMD_STATUS); |
| val |= LTSSM_EN_VAL; |
| writel(val, pci->app_base + PCIE_CMD_STATUS); |
| |
| /* Check that link was established */ |
| if (!wait_link_up(pci)) |
| return 0; |
| |
| /* |
| * Link can be established in Gen 1. still need to wait |
| * till MAC nagaotiation is completed |
| */ |
| udelay(100); |
| |
| return 1; |
| } |
| |
| static int pcie_am654_set_mode(struct pcie_dw_ti *pci, |
| enum dw_pcie_device_mode mode) |
| { |
| struct regmap *syscon; |
| u32 val; |
| u32 mask; |
| int ret; |
| |
| syscon = syscon_regmap_lookup_by_phandle(pci->dw.dev, |
| "ti,syscon-pcie-mode"); |
| if (IS_ERR(syscon)) |
| return 0; |
| |
| mask = AM654_PCIE_DEV_TYPE_MASK; |
| |
| switch (mode) { |
| case DW_PCIE_RC_TYPE: |
| val = RC; |
| break; |
| case DW_PCIE_EP_TYPE: |
| val = EP; |
| break; |
| default: |
| dev_err(pci->dw.dev, "INVALID device type %d\n", mode); |
| return -EINVAL; |
| } |
| |
| ret = regmap_update_bits(syscon, 0, mask, val); |
| if (ret) { |
| dev_err(pci->dw.dev, "failed to set pcie mode\n"); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int pcie_dw_init_id(struct pcie_dw_ti *pci) |
| { |
| struct regmap *devctrl_regs; |
| unsigned int id; |
| int ret; |
| |
| devctrl_regs = syscon_regmap_lookup_by_phandle(pci->dw.dev, |
| "ti,syscon-pcie-id"); |
| if (IS_ERR(devctrl_regs)) |
| return PTR_ERR(devctrl_regs); |
| |
| ret = regmap_read(devctrl_regs, 0, &id); |
| if (ret) |
| return ret; |
| |
| dw_pcie_dbi_write_enable(&pci->dw, true); |
| writew(id & PCIE_VENDORID_MASK, pci->dw.dbi_base + PCI_VENDOR_ID); |
| writew(id >> PCIE_DEVICEID_SHIFT, pci->dw.dbi_base + PCI_DEVICE_ID); |
| dw_pcie_dbi_write_enable(&pci->dw, false); |
| |
| return 0; |
| } |
| |
| /** |
| * pcie_dw_ti_probe() - Probe the PCIe bus for active link |
| * |
| * @dev: A pointer to the device being operated on |
| * |
| * Probe for an active link on the PCIe bus and configure the controller |
| * to enable this port. |
| * |
| * Return: 0 on success, else -ENODEV |
| */ |
| static int pcie_dw_ti_probe(struct udevice *dev) |
| { |
| struct pcie_dw_ti *pci = dev_get_priv(dev); |
| struct udevice *ctlr = pci_get_controller(dev); |
| struct pci_controller *hose = dev_get_uclass_priv(ctlr); |
| struct power_domain pci_pwrdmn; |
| struct phy phy0, phy1; |
| int ret; |
| |
| ret = power_domain_get_by_index(dev, &pci_pwrdmn, 0); |
| if (ret) { |
| dev_err(dev, "failed to get power domain\n"); |
| return ret; |
| } |
| |
| ret = power_domain_on(&pci_pwrdmn); |
| if (ret) { |
| dev_err(dev, "Power domain on failed\n"); |
| return ret; |
| } |
| |
| ret = generic_phy_get_by_name(dev, "pcie-phy0", &phy0); |
| if (ret) { |
| dev_err(dev, "Unable to get phy0"); |
| return ret; |
| } |
| generic_phy_reset(&phy0); |
| generic_phy_init(&phy0); |
| generic_phy_power_on(&phy0); |
| |
| ret = generic_phy_get_by_name(dev, "pcie-phy1", &phy1); |
| if (ret) { |
| dev_err(dev, "Unable to get phy1"); |
| return ret; |
| } |
| generic_phy_reset(&phy1); |
| generic_phy_init(&phy1); |
| generic_phy_power_on(&phy1); |
| |
| pci->dw.first_busno = dev_seq(dev); |
| pci->dw.dev = dev; |
| |
| pcie_dw_setup_host(&pci->dw); |
| pcie_dw_init_id(pci); |
| |
| if (device_is_compatible(dev, "ti,am654-pcie-rc")) |
| pcie_am654_set_mode(pci, DW_PCIE_RC_TYPE); |
| |
| if (!pcie_dw_ti_pcie_link_up(pci, LINK_SPEED_GEN_2)) { |
| printf("PCIE-%d: Link down\n", dev_seq(dev)); |
| return -ENODEV; |
| } |
| |
| printf("PCIE-%d: Link up (Gen%d-x%d, Bus%d)\n", dev_seq(dev), |
| pcie_dw_get_link_speed(&pci->dw), |
| pcie_dw_get_link_width(&pci->dw), |
| hose->first_busno); |
| |
| pcie_dw_prog_outbound_atu_unroll(&pci->dw, PCIE_ATU_REGION_INDEX0, |
| PCIE_ATU_TYPE_MEM, |
| pci->dw.mem.phys_start, |
| pci->dw.mem.bus_start, pci->dw.mem.size); |
| |
| return 0; |
| } |
| |
| /** |
| * pcie_dw_ti_of_to_plat() - Translate from DT to device state |
| * |
| * @dev: A pointer to the device being operated on |
| * |
| * Translate relevant data from the device tree pertaining to device @dev into |
| * state that the driver will later make use of. This state is stored in the |
| * device's private data structure. |
| * |
| * Return: 0 on success, else -EINVAL |
| */ |
| static int pcie_dw_ti_of_to_plat(struct udevice *dev) |
| { |
| struct pcie_dw_ti *pcie = dev_get_priv(dev); |
| |
| /* Get the controller base address */ |
| pcie->dw.dbi_base = (void *)dev_read_addr_name(dev, "dbics"); |
| if ((fdt_addr_t)pcie->dw.dbi_base == FDT_ADDR_T_NONE) |
| return -EINVAL; |
| |
| /* Get the config space base address and size */ |
| pcie->dw.cfg_base = (void *)dev_read_addr_size_name(dev, "config", |
| &pcie->dw.cfg_size); |
| if ((fdt_addr_t)pcie->dw.cfg_base == FDT_ADDR_T_NONE) |
| return -EINVAL; |
| |
| /* Get the iATU base address and size */ |
| pcie->dw.atu_base = (void *)dev_read_addr_name(dev, "atu"); |
| if ((fdt_addr_t)pcie->dw.atu_base == FDT_ADDR_T_NONE) |
| return -EINVAL; |
| |
| /* Get the app base address and size */ |
| pcie->app_base = (void *)dev_read_addr_name(dev, "app"); |
| if ((fdt_addr_t)pcie->app_base == FDT_ADDR_T_NONE) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static const struct dm_pci_ops pcie_dw_ti_ops = { |
| .read_config = pcie_dw_read_config, |
| .write_config = pcie_dw_write_config, |
| }; |
| |
| static const struct udevice_id pcie_dw_ti_ids[] = { |
| { .compatible = "ti,am654-pcie-rc" }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(pcie_dw_ti) = { |
| .name = "pcie_dw_ti", |
| .id = UCLASS_PCI, |
| .of_match = pcie_dw_ti_ids, |
| .ops = &pcie_dw_ti_ops, |
| .of_to_plat = pcie_dw_ti_of_to_plat, |
| .probe = pcie_dw_ti_probe, |
| .priv_auto = sizeof(struct pcie_dw_ti), |
| }; |