| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * efi_selftest_block |
| * |
| * Copyright (c) 2017 Heinrich Schuchardt <xypron.glpk@gmx.de> |
| * |
| * This test checks the driver for block IO devices. |
| * A disk image is created in memory. |
| * A handle is created for the new block IO device. |
| * The block I/O protocol is installed on the handle. |
| * ConnectController is used to setup partitions and to install the simple |
| * file protocol. |
| * A known file is read from the file system and verified. |
| */ |
| |
| #include <efi_selftest.h> |
| #include "efi_selftest_disk_image.h" |
| |
| /* Block size of compressed disk image */ |
| #define COMPRESSED_DISK_IMAGE_BLOCK_SIZE 8 |
| |
| /* Binary logarithm of the block size */ |
| #define LB_BLOCK_SIZE 9 |
| |
| static struct efi_boot_services *boottime; |
| |
| static const efi_guid_t block_io_protocol_guid = BLOCK_IO_GUID; |
| static const efi_guid_t guid_device_path = DEVICE_PATH_GUID; |
| static const efi_guid_t guid_simple_file_system_protocol = |
| EFI_SIMPLE_FILE_SYSTEM_PROTOCOL_GUID; |
| static const efi_guid_t guid_file_system_info = EFI_FILE_SYSTEM_INFO_GUID; |
| static efi_guid_t guid_vendor = |
| EFI_GUID(0xdbca4c98, 0x6cb0, 0x694d, |
| 0x08, 0x72, 0x81, 0x9c, 0x65, 0x0c, 0xb7, 0xb8); |
| |
| static struct efi_device_path *dp; |
| |
| /* One 8 byte block of the compressed disk image */ |
| struct line { |
| size_t addr; |
| char *line; |
| }; |
| |
| /* Compressed disk image */ |
| struct compressed_disk_image { |
| size_t length; |
| struct line lines[]; |
| }; |
| |
| static const struct compressed_disk_image img = EFI_ST_DISK_IMG; |
| |
| /* Decompressed disk image */ |
| static u8 *image; |
| |
| /* |
| * Reset service of the block IO protocol. |
| * |
| * @this block IO protocol |
| * @return status code |
| */ |
| static efi_status_t EFIAPI reset( |
| struct efi_block_io *this, |
| char extended_verification) |
| { |
| return EFI_SUCCESS; |
| } |
| |
| /* |
| * Read service of the block IO protocol. |
| * |
| * @this block IO protocol |
| * @media_id media id |
| * @lba start of the read in logical blocks |
| * @buffer_size number of bytes to read |
| * @buffer target buffer |
| * @return status code |
| */ |
| static efi_status_t EFIAPI read_blocks( |
| struct efi_block_io *this, u32 media_id, u64 lba, |
| efi_uintn_t buffer_size, void *buffer) |
| { |
| u8 *start; |
| |
| if ((lba << LB_BLOCK_SIZE) + buffer_size > img.length) |
| return EFI_INVALID_PARAMETER; |
| start = image + (lba << LB_BLOCK_SIZE); |
| |
| boottime->copy_mem(buffer, start, buffer_size); |
| |
| return EFI_SUCCESS; |
| } |
| |
| /* |
| * Write service of the block IO protocol. |
| * |
| * @this block IO protocol |
| * @media_id media id |
| * @lba start of the write in logical blocks |
| * @buffer_size number of bytes to read |
| * @buffer source buffer |
| * @return status code |
| */ |
| static efi_status_t EFIAPI write_blocks( |
| struct efi_block_io *this, u32 media_id, u64 lba, |
| efi_uintn_t buffer_size, void *buffer) |
| { |
| u8 *start; |
| |
| if ((lba << LB_BLOCK_SIZE) + buffer_size > img.length) |
| return EFI_INVALID_PARAMETER; |
| start = image + (lba << LB_BLOCK_SIZE); |
| |
| boottime->copy_mem(start, buffer, buffer_size); |
| |
| return EFI_SUCCESS; |
| } |
| |
| /* |
| * Flush service of the block IO protocol. |
| * |
| * @this block IO protocol |
| * @return status code |
| */ |
| static efi_status_t EFIAPI flush_blocks(struct efi_block_io *this) |
| { |
| return EFI_SUCCESS; |
| } |
| |
| /* |
| * Decompress the disk image. |
| * |
| * @image decompressed disk image |
| * @return status code |
| */ |
| static efi_status_t decompress(u8 **image) |
| { |
| u8 *buf; |
| size_t i; |
| size_t addr; |
| size_t len; |
| efi_status_t ret; |
| |
| ret = boottime->allocate_pool(EFI_LOADER_DATA, img.length, |
| (void **)&buf); |
| if (ret != EFI_SUCCESS) { |
| efi_st_error("Out of memory\n"); |
| return ret; |
| } |
| boottime->set_mem(buf, img.length, 0); |
| |
| for (i = 0; ; ++i) { |
| if (!img.lines[i].line) |
| break; |
| addr = img.lines[i].addr; |
| len = COMPRESSED_DISK_IMAGE_BLOCK_SIZE; |
| if (addr + len > img.length) |
| len = img.length - addr; |
| boottime->copy_mem(buf + addr, img.lines[i].line, len); |
| } |
| *image = buf; |
| return ret; |
| } |
| |
| static struct efi_block_io_media media; |
| |
| static struct efi_block_io block_io = { |
| .media = &media, |
| .reset = reset, |
| .read_blocks = read_blocks, |
| .write_blocks = write_blocks, |
| .flush_blocks = flush_blocks, |
| }; |
| |
| /* Handle for the block IO device */ |
| static efi_handle_t disk_handle; |
| |
| /* |
| * Setup unit test. |
| * |
| * @handle: handle of the loaded image |
| * @systable: system table |
| * @return: EFI_ST_SUCCESS for success |
| */ |
| static int setup(const efi_handle_t handle, |
| const struct efi_system_table *systable) |
| { |
| efi_status_t ret; |
| struct efi_device_path_vendor vendor_node; |
| struct efi_device_path end_node; |
| |
| boottime = systable->boottime; |
| |
| decompress(&image); |
| |
| block_io.media->block_size = 1 << LB_BLOCK_SIZE; |
| block_io.media->last_block = img.length >> LB_BLOCK_SIZE; |
| |
| ret = boottime->install_protocol_interface( |
| &disk_handle, &block_io_protocol_guid, |
| EFI_NATIVE_INTERFACE, &block_io); |
| if (ret != EFI_SUCCESS) { |
| efi_st_error("Failed to install block I/O protocol\n"); |
| return EFI_ST_FAILURE; |
| } |
| |
| ret = boottime->allocate_pool(EFI_LOADER_DATA, |
| sizeof(struct efi_device_path_vendor) + |
| sizeof(struct efi_device_path), |
| (void **)&dp); |
| if (ret != EFI_SUCCESS) { |
| efi_st_error("Out of memory\n"); |
| return EFI_ST_FAILURE; |
| } |
| vendor_node.dp.type = DEVICE_PATH_TYPE_HARDWARE_DEVICE; |
| vendor_node.dp.sub_type = DEVICE_PATH_SUB_TYPE_VENDOR; |
| vendor_node.dp.length = sizeof(struct efi_device_path_vendor); |
| |
| boottime->copy_mem(&vendor_node.guid, &guid_vendor, |
| sizeof(efi_guid_t)); |
| boottime->copy_mem(dp, &vendor_node, |
| sizeof(struct efi_device_path_vendor)); |
| end_node.type = DEVICE_PATH_TYPE_END; |
| end_node.sub_type = DEVICE_PATH_SUB_TYPE_END; |
| end_node.length = sizeof(struct efi_device_path); |
| |
| boottime->copy_mem((char *)dp + sizeof(struct efi_device_path_vendor), |
| &end_node, sizeof(struct efi_device_path)); |
| ret = boottime->install_protocol_interface(&disk_handle, |
| &guid_device_path, |
| EFI_NATIVE_INTERFACE, |
| dp); |
| if (ret != EFI_SUCCESS) { |
| efi_st_error("InstallProtocolInterface failed\n"); |
| return EFI_ST_FAILURE; |
| } |
| return EFI_ST_SUCCESS; |
| } |
| |
| /* |
| * Tear down unit test. |
| * |
| * @return: EFI_ST_SUCCESS for success |
| */ |
| static int teardown(void) |
| { |
| efi_status_t r = EFI_ST_SUCCESS; |
| |
| if (disk_handle) { |
| r = boottime->uninstall_protocol_interface(disk_handle, |
| &guid_device_path, |
| dp); |
| if (r != EFI_SUCCESS) { |
| efi_st_error("Uninstall device path failed\n"); |
| return EFI_ST_FAILURE; |
| } |
| r = boottime->uninstall_protocol_interface( |
| disk_handle, &block_io_protocol_guid, |
| &block_io); |
| if (r != EFI_SUCCESS) { |
| efi_st_todo( |
| "Failed to uninstall block I/O protocol\n"); |
| return EFI_ST_SUCCESS; |
| } |
| } |
| |
| if (image) { |
| r = efi_free_pool(image); |
| if (r != EFI_SUCCESS) { |
| efi_st_error("Failed to free image\n"); |
| return EFI_ST_FAILURE; |
| } |
| } |
| return r; |
| } |
| |
| /* |
| * Get length of device path without end tag. |
| * |
| * @dp device path |
| * @return length of device path in bytes |
| */ |
| static efi_uintn_t dp_size(struct efi_device_path *dp) |
| { |
| struct efi_device_path *pos = dp; |
| |
| while (pos->type != DEVICE_PATH_TYPE_END) |
| pos = (struct efi_device_path *)((char *)pos + pos->length); |
| return (char *)pos - (char *)dp; |
| } |
| |
| /* |
| * Execute unit test. |
| * |
| * @return: EFI_ST_SUCCESS for success |
| */ |
| static int execute(void) |
| { |
| efi_status_t ret; |
| efi_uintn_t no_handles, i, len; |
| efi_handle_t *handles; |
| efi_handle_t handle_partition = NULL; |
| struct efi_device_path *dp_partition; |
| struct efi_simple_file_system_protocol *file_system; |
| struct efi_file_handle *root, *file; |
| struct { |
| struct efi_file_system_info info; |
| u16 label[12]; |
| } system_info; |
| efi_uintn_t buf_size; |
| char buf[16] __aligned(ARCH_DMA_MINALIGN); |
| u64 pos; |
| |
| /* Connect controller to virtual disk */ |
| ret = boottime->connect_controller(disk_handle, NULL, NULL, 1); |
| if (ret != EFI_SUCCESS) { |
| efi_st_error("Failed to connect controller\n"); |
| return EFI_ST_FAILURE; |
| } |
| |
| /* Get the handle for the partition */ |
| ret = boottime->locate_handle_buffer( |
| BY_PROTOCOL, &guid_device_path, NULL, |
| &no_handles, &handles); |
| if (ret != EFI_SUCCESS) { |
| efi_st_error("Failed to locate handles\n"); |
| return EFI_ST_FAILURE; |
| } |
| len = dp_size(dp); |
| for (i = 0; i < no_handles; ++i) { |
| ret = boottime->open_protocol(handles[i], &guid_device_path, |
| (void **)&dp_partition, |
| NULL, NULL, |
| EFI_OPEN_PROTOCOL_GET_PROTOCOL); |
| if (ret != EFI_SUCCESS) { |
| efi_st_error("Failed to open device path protocol\n"); |
| return EFI_ST_FAILURE; |
| } |
| if (len >= dp_size(dp_partition)) |
| continue; |
| if (efi_st_memcmp(dp, dp_partition, len)) |
| continue; |
| handle_partition = handles[i]; |
| break; |
| } |
| ret = boottime->free_pool(handles); |
| if (ret != EFI_SUCCESS) { |
| efi_st_error("Failed to free pool memory\n"); |
| return EFI_ST_FAILURE; |
| } |
| if (!handle_partition) { |
| efi_st_error("Partition handle not found\n"); |
| return EFI_ST_FAILURE; |
| } |
| |
| /* Open the simple file system protocol */ |
| ret = boottime->open_protocol(handle_partition, |
| &guid_simple_file_system_protocol, |
| (void **)&file_system, NULL, NULL, |
| EFI_OPEN_PROTOCOL_GET_PROTOCOL); |
| if (ret != EFI_SUCCESS) { |
| efi_st_error("Failed to open simple file system protocol\n"); |
| return EFI_ST_FAILURE; |
| } |
| |
| /* Open volume */ |
| ret = file_system->open_volume(file_system, &root); |
| if (ret != EFI_SUCCESS) { |
| efi_st_error("Failed to open volume\n"); |
| return EFI_ST_FAILURE; |
| } |
| buf_size = sizeof(system_info); |
| ret = root->getinfo(root, &guid_file_system_info, &buf_size, |
| &system_info); |
| if (ret != EFI_SUCCESS) { |
| efi_st_error("Failed to get file system info\n"); |
| return EFI_ST_FAILURE; |
| } |
| if (system_info.info.block_size != 512) { |
| efi_st_error("Wrong block size %u, expected 512\n", |
| system_info.info.block_size); |
| return EFI_ST_FAILURE; |
| } |
| if (efi_st_strcmp_16_8(system_info.info.volume_label, "U-BOOT TEST")) { |
| efi_st_todo( |
| "Wrong volume label '%ps', expected 'U-BOOT TEST'\n", |
| system_info.info.volume_label); |
| } |
| |
| /* Read file */ |
| ret = root->open(root, &file, L"hello.txt", EFI_FILE_MODE_READ, |
| 0); |
| if (ret != EFI_SUCCESS) { |
| efi_st_error("Failed to open file\n"); |
| return EFI_ST_FAILURE; |
| } |
| ret = file->setpos(file, 1); |
| if (ret != EFI_SUCCESS) { |
| efi_st_error("SetPosition failed\n"); |
| return EFI_ST_FAILURE; |
| } |
| buf_size = sizeof(buf) - 1; |
| ret = file->read(file, &buf_size, buf); |
| if (ret != EFI_SUCCESS) { |
| efi_st_error("Failed to read file\n"); |
| return EFI_ST_FAILURE; |
| } |
| if (buf_size != 12) { |
| efi_st_error("Wrong number of bytes read: %u\n", |
| (unsigned int)buf_size); |
| return EFI_ST_FAILURE; |
| } |
| if (efi_st_memcmp(buf, "ello world!", 11)) { |
| efi_st_error("Unexpected file content\n"); |
| return EFI_ST_FAILURE; |
| } |
| ret = file->getpos(file, &pos); |
| if (ret != EFI_SUCCESS) { |
| efi_st_error("GetPosition failed\n"); |
| return EFI_ST_FAILURE; |
| } |
| if (pos != 13) { |
| efi_st_error("GetPosition returned %u, expected 13\n", |
| (unsigned int)pos); |
| return EFI_ST_FAILURE; |
| } |
| ret = file->close(file); |
| if (ret != EFI_SUCCESS) { |
| efi_st_error("Failed to close file\n"); |
| return EFI_ST_FAILURE; |
| } |
| |
| #ifdef CONFIG_FAT_WRITE |
| /* Write file */ |
| ret = root->open(root, &file, L"u-boot.txt", EFI_FILE_MODE_READ | |
| EFI_FILE_MODE_WRITE | EFI_FILE_MODE_CREATE, 0); |
| if (ret != EFI_SUCCESS) { |
| efi_st_error("Failed to open file\n"); |
| return EFI_ST_FAILURE; |
| } |
| buf_size = 7; |
| boottime->set_mem(buf, sizeof(buf), 0); |
| boottime->copy_mem(buf, "U-Boot", buf_size); |
| ret = file->write(file, &buf_size, buf); |
| if (ret != EFI_SUCCESS || buf_size != 7) { |
| efi_st_error("Failed to write file\n"); |
| return EFI_ST_FAILURE; |
| } |
| ret = file->getpos(file, &pos); |
| if (ret != EFI_SUCCESS) { |
| efi_st_error("GetPosition failed\n"); |
| return EFI_ST_FAILURE; |
| } |
| if (pos != 7) { |
| efi_st_error("GetPosition returned %u, expected 7\n", |
| (unsigned int)pos); |
| return EFI_ST_FAILURE; |
| } |
| ret = file->close(file); |
| if (ret != EFI_SUCCESS) { |
| efi_st_error("Failed to close file\n"); |
| return EFI_ST_FAILURE; |
| } |
| |
| /* Verify file */ |
| boottime->set_mem(buf, sizeof(buf), 0); |
| ret = root->open(root, &file, L"u-boot.txt", EFI_FILE_MODE_READ, |
| 0); |
| if (ret != EFI_SUCCESS) { |
| efi_st_error("Failed to open file\n"); |
| return EFI_ST_FAILURE; |
| } |
| buf_size = sizeof(buf) - 1; |
| ret = file->read(file, &buf_size, buf); |
| if (ret != EFI_SUCCESS) { |
| efi_st_error("Failed to read file\n"); |
| return EFI_ST_FAILURE; |
| } |
| if (buf_size != 7) { |
| efi_st_error("Wrong number of bytes read: %u\n", |
| (unsigned int)buf_size); |
| return EFI_ST_FAILURE; |
| } |
| if (efi_st_memcmp(buf, "U-Boot", 7)) { |
| efi_st_error("Unexpected file content %s\n", buf); |
| return EFI_ST_FAILURE; |
| } |
| ret = file->close(file); |
| if (ret != EFI_SUCCESS) { |
| efi_st_error("Failed to close file\n"); |
| return EFI_ST_FAILURE; |
| } |
| #else |
| efi_st_todo("CONFIG_FAT_WRITE is not set\n"); |
| #endif /* CONFIG_FAT_WRITE */ |
| |
| /* Close volume */ |
| ret = root->close(root); |
| if (ret != EFI_SUCCESS) { |
| efi_st_error("Failed to close volume\n"); |
| return EFI_ST_FAILURE; |
| } |
| |
| return EFI_ST_SUCCESS; |
| } |
| |
| EFI_UNIT_TEST(blkdev) = { |
| .name = "block device", |
| .phase = EFI_EXECUTE_BEFORE_BOOTTIME_EXIT, |
| .setup = setup, |
| .execute = execute, |
| .teardown = teardown, |
| }; |