| /* |
| * Lowlevel setup for SMDKV310 board based on S5PC210 |
| * |
| * Copyright (C) 2011 Samsung Electronics |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <config.h> |
| #include <version.h> |
| #include <asm/arch/cpu.h> |
| |
| /* |
| * Register usages: |
| * |
| * r5 has zero always |
| * r7 has GPIO part1 base 0x11400000 |
| * r6 has GPIO part2 base 0x11000000 |
| */ |
| |
| #define MEM_DLLl_ON |
| |
| _TEXT_BASE: |
| .word CONFIG_SYS_TEXT_BASE |
| |
| .globl lowlevel_init |
| lowlevel_init: |
| push {lr} |
| |
| /* r5 has always zero */ |
| mov r5, #0 |
| ldr r7, =S5PC210_GPIO_PART1_BASE |
| ldr r6, =S5PC210_GPIO_PART2_BASE |
| |
| /* check reset status */ |
| ldr r0, =(S5PC210_POWER_BASE + 0x81C) @ INFORM7 |
| ldr r1, [r0] |
| |
| /* AFTR wakeup reset */ |
| ldr r2, =S5P_CHECK_DIDLE |
| cmp r1, r2 |
| beq exit_wakeup |
| |
| /* Sleep wakeup reset */ |
| ldr r2, =S5P_CHECK_SLEEP |
| cmp r1, r2 |
| beq wakeup_reset |
| |
| /* |
| * If U-boot is already running in ram, no need to relocate U-Boot. |
| * Memory controller must be configured before relocating U-Boot |
| * in ram. |
| */ |
| ldr r0, =0x00ffffff /* r0 <- Mask Bits*/ |
| bic r1, pc, r0 /* pc <- current addr of code */ |
| /* r1 <- unmasked bits of pc */ |
| |
| ldr r2, _TEXT_BASE /* r2 <- original base addr in ram */ |
| bic r2, r2, r0 /* r2 <- unmasked bits of r2*/ |
| cmp r1, r2 /* compare r1, r2 */ |
| beq 1f /* r0 == r1 then skip sdram init */ |
| |
| /* init system clock */ |
| bl system_clock_init |
| |
| /* Memory initialize */ |
| bl mem_ctrl_asm_init |
| |
| 1: |
| /* for UART */ |
| bl uart_asm_init |
| bl tzpc_init |
| pop {pc} |
| |
| wakeup_reset: |
| bl system_clock_init |
| bl mem_ctrl_asm_init |
| bl tzpc_init |
| |
| exit_wakeup: |
| /* Load return address and jump to kernel */ |
| ldr r0, =(S5PC210_POWER_BASE + 0x800) @ INFORM0 |
| |
| /* r1 = physical address of s5pc210_cpu_resume function */ |
| ldr r1, [r0] |
| |
| /* Jump to kernel*/ |
| mov pc, r1 |
| nop |
| nop |
| |
| /* |
| * system_clock_init: Initialize core clock and bus clock. |
| * void system_clock_init(void) |
| */ |
| system_clock_init: |
| push {lr} |
| ldr r0, =S5PC210_CLOCK_BASE |
| |
| /* APLL(1), MPLL(1), CORE(0), HPM(0) */ |
| ldr r1, =0x0101 |
| ldr r2, =0x14200 @CLK_SRC_CPU |
| str r1, [r0, r2] |
| |
| /* wait ?us */ |
| mov r1, #0x10000 |
| 2: subs r1, r1, #1 |
| bne 2b |
| |
| ldr r1, =0x00 |
| ldr r2, =0x0C210 @CLK_SRC_TOP0 |
| str r1, [r0, r2] |
| |
| ldr r1, =0x00 |
| ldr r2, =0x0C214 @CLK_SRC_TOP1_OFFSET |
| str r1, [r0, r2] |
| |
| /* DMC */ |
| ldr r1, =0x00 |
| ldr r2, =0x10200 @CLK_SRC_DMC_OFFSET |
| str r1, [r0, r2] |
| |
| /*CLK_SRC_LEFTBUS */ |
| ldr r1, =0x00 |
| ldr r2, =0x04200 @CLK_SRC_LEFTBUS_OFFSET |
| str r1, [r0, r2] |
| |
| /*CLK_SRC_RIGHTBUS */ |
| ldr r1, =0x00 |
| ldr r2, =0x08200 @CLK_SRC_RIGHTBUS_OFFSET |
| str r1, [r0, r2] |
| |
| /* SATA: SCLKMPLL(0), MMC[0:4]: SCLKMPLL(6) */ |
| ldr r1, =0x066666 |
| ldr r2, =0x0C240 @ CLK_SRC_FSYS |
| str r1, [r0, r2] |
| |
| /* UART[0:4], PWM: SCLKMPLL(6) */ |
| ldr r1, =0x06666666 |
| ldr r2, =0x0C250 @CLK_SRC_PERIL0_OFFSET |
| str r1, [r0, r2] |
| |
| /* wait ?us */ |
| mov r1, #0x10000 |
| 3: subs r1, r1, #1 |
| bne 3b |
| |
| /* |
| * CLK_DIV_CPU0: |
| * |
| * PCLK_DBG_RATIO[20] 0x1 |
| * ATB_RATIO[16] 0x3 |
| * PERIPH_RATIO[12] 0x3 |
| * COREM1_RATIO[8] 0x7 |
| * COREM0_RATIO[4] 0x3 |
| */ |
| ldr r1, =0x0133730 |
| ldr r2, =0x14500 @CLK_DIV_CPU0_OFFSET |
| str r1, [r0, r2] |
| |
| /* CLK_DIV_CPU1: COPY_RATIO [0] 0x3 */ |
| ldr r1, =0x03 |
| ldr r2, =0x14504 @CLK_DIV_CPU1_OFFSET |
| str r1, [r0, r2] |
| |
| /* |
| * CLK_DIV_DMC0: |
| * |
| * CORE_TIMERS_RATIO[28] 0x1 |
| * COPY2_RATIO[24] 0x3 |
| * DMCP_RATIO[20] 0x1 |
| * DMCD_RATIO[16] 0x1 |
| * DMC_RATIO[12] 0x1 |
| * DPHY_RATIO[8] 0x1 |
| * ACP_PCLK_RATIO[4] 0x1 |
| * ACP_RATIO[0] 0x3 |
| */ |
| ldr r1, =0x13111113 |
| ldr r2, =0x010500 @CLK_DIV_DMC0_OFFSET |
| str r1, [r0, r2] |
| |
| /* |
| * CLK_DIV_DMC1: |
| * |
| * DPM_RATIO[24] 0x1 |
| * DVSEM_RATIO[16] 0x1 |
| * PWI_RATIO[8] 0x1 |
| */ |
| ldr r1, =0x01010100 |
| ldr r2, =0x010504 @CLK_DIV_DMC1_OFFSET |
| str r1, [r0, r2] |
| |
| /* |
| * CLK_DIV_LEFRBUS: |
| * |
| * GPL_RATIO[4] 0x1 |
| * GDL_RATIO[0] 0x3 |
| */ |
| ldr r1, =0x013 |
| ldr r2, =0x04500 @CLK_DIV_LEFTBUS_OFFSET |
| str r1, [r0, r2] |
| |
| /* |
| * CLK_DIV_RIGHTBUS: |
| * |
| * GPR_RATIO[4] 0x1 |
| * GDR_RATIO[0] 0x3 |
| */ |
| ldr r1, =0x013 |
| ldr r2, =0x08500 @CLK_DIV_RIGHTBUS_OFFSET |
| str r1, [r0, r2] |
| |
| /* |
| * CLK_DIV_TOP: |
| * |
| * ONENAND_RATIO[16] 0x0 |
| * ACLK_133_RATIO[12] 0x5 |
| * ACLK_160_RATIO[8] 0x4 |
| * ACLK_100_RATIO[4] 0x7 |
| * ACLK_200_RATIO[0] 0x3 |
| */ |
| ldr r1, =0x05473 |
| ldr r2, =0x0C510 @CLK_DIV_TOP_OFFSET |
| str r1, [r0, r2] |
| |
| /* MMC[0:1] */ |
| ldr r1, =0x000f000f /* 800(MPLL) / (15 + 1) */ |
| ldr r2, =0x0C544 @ CLK_DIV_FSYS1 |
| str r1, [r0, r2] |
| |
| /* MMC[2:3] */ |
| ldr r1, =0x000f000f /* 800(MPLL) / (15 + 1) */ |
| ldr r2, =0x0C548 @ CLK_DIV_FSYS2 |
| str r1, [r0, r2] |
| |
| /* MMC4 */ |
| ldr r1, =0x000f /* 800(MPLL) / (15 + 1) */ |
| ldr r2, =0x0C54C @ CLK_DIV_FSYS3 |
| str r1, [r0, r2] |
| |
| /* wait ?us */ |
| mov r1, #0x10000 |
| 4: subs r1, r1, #1 |
| bne 4b |
| |
| /* |
| * CLK_DIV_PERIL0: |
| * |
| * UART5_RATIO[20] 8 |
| * UART4_RATIO[16] 8 |
| * UART3_RATIO[12] 8 |
| * UART2_RATIO[8] 8 |
| * UART1_RATIO[4] 8 |
| * UART0_RATIO[0] 8 |
| */ |
| ldr r1, =0x774777 |
| ldr r2, =0x0C550 @CLK_DIV_PERIL0_OFFSET |
| str r1, [r0, r2] |
| |
| /* SLIMBUS: ???, PWM */ |
| ldr r1, =0x8 |
| ldr r2, =0x0C55C @ CLK_DIV_PERIL3 |
| str r1, [r0, r2] |
| |
| /* Set PLL locktime */ |
| ldr r1, =0x01C20 |
| ldr r2, =0x014000 @APLL_LOCK_OFFSET |
| str r1, [r0, r2] |
| ldr r1, =0x01C20 |
| ldr r2, =0x014008 @MPLL_LOCK_OFFSET |
| str r1, [r0, r2] |
| ldr r1, =0x01C20 |
| ldr r2, =0x0C010 @EPLL_LOCK_OFFSET |
| str r1, [r0, r2] |
| ldr r1, =0x01C20 |
| ldr r2, =0x0C020 @VPLL_LOCK_OFFSET |
| str r1, [r0, r2] |
| |
| /* |
| * APLL_CON1: |
| * |
| * APLL_AFC_ENB[31] 0x1 |
| * APLL_AFC[0] 0xC |
| */ |
| ldr r1, =0x8000000C |
| ldr r2, =0x014104 @APLL_CON1_OFFSET |
| str r1, [r0, r2] |
| |
| /* |
| * APLL_CON0: |
| * |
| * APLL_MDIV[16] 0xFA |
| * APLL_PDIV[8] 0x6 |
| * APLL_SDIV[0] 0x1 |
| */ |
| ldr r1, =0x80FA0601 |
| ldr r2, =0x014100 @APLL_CON0_OFFSET |
| str r1, [r0, r2] |
| |
| /* |
| * MPLL_CON1: |
| * |
| * MPLL_AFC_ENB[31] 0x1 |
| * MPLL_AFC[0] 0x1C |
| */ |
| ldr r1, =0x0000001C |
| ldr r2, =0x01410C @MPLL_CON1_OFFSET |
| str r1, [r0, r2] |
| |
| /* |
| * MPLL_CON0: |
| * |
| * MPLL_MDIV[16] 0xC8 |
| * MPLL_PDIV[8] 0x6 |
| * MPLL_SDIV[0] 0x1 |
| */ |
| ldr r1, =0x80C80601 |
| ldr r2, =0x014108 @MPLL_CON0_OFFSET |
| str r1, [r0, r2] |
| |
| /* EPLL */ |
| ldr r1, =0x0 |
| ldr r2, =0x0C114 @EPLL_CON1_OFFSET |
| str r1, [r0, r2] |
| |
| /* |
| * EPLL_CON0: |
| * |
| * EPLL_MDIV[16] 0x30 |
| * EPLL_PDIV[8] 0x3 |
| * EPLL_SDIV[0] 0x2 |
| */ |
| ldr r1, =0x80300302 |
| ldr r2, =0x0C110 @EPLL_CON0_OFFSET |
| str r1, [r0, r2] |
| |
| /* |
| * VPLL_CON1: |
| * |
| * VPLL_MRR[24] 0x11 |
| * VPLL_MFR[16] 0x0 |
| * VPLL_K[0] 0x400 |
| */ |
| ldr r1, =0x11000400 |
| ldr r2, =0x0C124 @VPLL_CON1_OFFSET |
| str r1, [r0, r2] |
| |
| /* |
| * VPLL_CON0: |
| * |
| * VPLL_MDIV[16] 0x35 |
| * VPLL_PDIV[8] 0x3 |
| * VPLL_SDIV[0] 0x2 |
| */ |
| ldr r1, =0x80350302 |
| ldr r2, =0x0C120 @VPLL_CON0_OFFSET |
| str r1, [r0, r2] |
| |
| /* wait ?us */ |
| mov r1, #0x30000 |
| 3: subs r1, r1, #1 |
| bne 3b |
| |
| pop {pc} |
| /* |
| * uart_asm_init: Initialize UART in asm mode, 115200bps fixed. |
| * void uart_asm_init(void) |
| */ |
| .globl uart_asm_init |
| uart_asm_init: |
| |
| /* setup UART0-UART3 GPIOs (part1) */ |
| mov r0, r7 |
| ldr r1, =0x22222222 |
| str r1, [r0, #0x00] @ S5PC210_GPIO_A0_OFFSET |
| ldr r1, =0x00222222 |
| str r1, [r0, #0x20] @ S5PC210_GPIO_A1_OFFSET |
| |
| ldr r0, =S5PC210_UART_BASE |
| add r0, r0, #S5PC210_DEFAULT_UART_OFFSET |
| |
| ldr r1, =0x3C5 |
| str r1, [r0, #0x4] |
| ldr r1, =0x111 |
| str r1, [r0, #0x8] |
| ldr r1, =0x3 |
| str r1, [r0, #0x0] |
| ldr r1, =0x35 |
| str r1, [r0, #0x28] |
| ldr r1, =0x4 |
| str r1, [r0, #0x2c] |
| |
| mov pc, lr |
| nop |
| nop |
| nop |
| |
| /* Setting TZPC[TrustZone Protection Controller] */ |
| tzpc_init: |
| ldr r0, =0x10110000 |
| mov r1, #0x0 |
| str r1, [r0] |
| mov r1, #0xff |
| str r1, [r0, #0x0804] |
| str r1, [r0, #0x0810] |
| str r1, [r0, #0x081C] |
| str r1, [r0, #0x0828] |
| |
| ldr r0, =0x10120000 |
| mov r1, #0x0 |
| str r1, [r0] |
| mov r1, #0xff |
| str r1, [r0, #0x0804] |
| str r1, [r0, #0x0810] |
| str r1, [r0, #0x081C] |
| str r1, [r0, #0x0828] |
| |
| ldr r0, =0x10130000 |
| mov r1, #0x0 |
| str r1, [r0] |
| mov r1, #0xff |
| str r1, [r0, #0x0804] |
| str r1, [r0, #0x0810] |
| str r1, [r0, #0x081C] |
| str r1, [r0, #0x0828] |
| |
| ldr r0, =0x10140000 |
| mov r1, #0x0 |
| str r1, [r0] |
| mov r1, #0xff |
| str r1, [r0, #0x0804] |
| str r1, [r0, #0x0810] |
| str r1, [r0, #0x081C] |
| str r1, [r0, #0x0828] |
| |
| ldr r0, =0x10150000 |
| mov r1, #0x0 |
| str r1, [r0] |
| mov r1, #0xff |
| str r1, [r0, #0x0804] |
| str r1, [r0, #0x0810] |
| str r1, [r0, #0x081C] |
| str r1, [r0, #0x0828] |
| |
| ldr r0, =0x10160000 |
| mov r1, #0x0 |
| str r1, [r0] |
| mov r1, #0xff |
| str r1, [r0, #0x0804] |
| str r1, [r0, #0x0810] |
| str r1, [r0, #0x081C] |
| str r1, [r0, #0x0828] |
| |
| mov pc, lr |