| /* |
| * (C) Copyright 2010 |
| * Texas Instruments, <www.ti.com> |
| * |
| * Aneesh V <aneesh@ti.com> |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| #include <common.h> |
| #include <asm/u-boot.h> |
| #include <asm/utils.h> |
| #include <asm/arch/sys_proto.h> |
| #include <mmc.h> |
| #include <fat.h> |
| #include <version.h> |
| #include <asm/omap_common.h> |
| #include <asm/arch/mmc_host_def.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| #ifdef CONFIG_GENERIC_MMC |
| int board_mmc_init(bd_t *bis) |
| { |
| switch (omap_boot_device()) { |
| case BOOT_DEVICE_MMC1: |
| omap_mmc_init(0); |
| break; |
| case BOOT_DEVICE_MMC2: |
| omap_mmc_init(1); |
| break; |
| } |
| return 0; |
| } |
| #endif |
| |
| static void mmc_load_image_raw(struct mmc *mmc) |
| { |
| u32 image_size_sectors, err; |
| const struct image_header *header; |
| |
| header = (struct image_header *)(CONFIG_SYS_TEXT_BASE - |
| sizeof(struct image_header)); |
| |
| /* read image header to find the image size & load address */ |
| err = mmc->block_dev.block_read(0, |
| CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR, 1, |
| (void *)header); |
| |
| if (err <= 0) |
| goto end; |
| |
| spl_parse_image_header(header); |
| |
| /* convert size to sectors - round up */ |
| image_size_sectors = (spl_image.size + MMCSD_SECTOR_SIZE - 1) / |
| MMCSD_SECTOR_SIZE; |
| |
| /* Read the header too to avoid extra memcpy */ |
| err = mmc->block_dev.block_read(0, |
| CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR, |
| image_size_sectors, (void *)spl_image.load_addr); |
| |
| end: |
| if (err <= 0) { |
| printf("spl: mmc blk read err - %d\n", err); |
| hang(); |
| } |
| } |
| |
| static void mmc_load_image_fat(struct mmc *mmc) |
| { |
| s32 err; |
| struct image_header *header; |
| |
| header = (struct image_header *)(CONFIG_SYS_TEXT_BASE - |
| sizeof(struct image_header)); |
| |
| err = fat_register_device(&mmc->block_dev, |
| CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION); |
| if (err) { |
| printf("spl: fat register err - %d\n", err); |
| hang(); |
| } |
| |
| err = file_fat_read(CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME, |
| (u8 *)header, sizeof(struct image_header)); |
| if (err <= 0) |
| goto end; |
| |
| spl_parse_image_header(header); |
| |
| err = file_fat_read(CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME, |
| (u8 *)spl_image.load_addr, 0); |
| |
| end: |
| if (err <= 0) { |
| printf("spl: error reading image %s, err - %d\n", |
| CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME, err); |
| hang(); |
| } |
| } |
| |
| void spl_mmc_load_image(void) |
| { |
| struct mmc *mmc; |
| int err; |
| u32 boot_mode; |
| |
| mmc_initialize(gd->bd); |
| /* We register only one device. So, the dev id is always 0 */ |
| mmc = find_mmc_device(0); |
| if (!mmc) { |
| puts("spl: mmc device not found!!\n"); |
| hang(); |
| } |
| |
| err = mmc_init(mmc); |
| if (err) { |
| printf("spl: mmc init failed: err - %d\n", err); |
| hang(); |
| } |
| boot_mode = omap_boot_mode(); |
| if (boot_mode == MMCSD_MODE_RAW) { |
| debug("boot mode - RAW\n"); |
| mmc_load_image_raw(mmc); |
| } else if (boot_mode == MMCSD_MODE_FAT) { |
| debug("boot mode - FAT\n"); |
| mmc_load_image_fat(mmc); |
| } else { |
| puts("spl: wrong MMC boot mode\n"); |
| hang(); |
| } |
| } |