| if ARM64 |
| |
| config ARMV8_SPL_EXCEPTION_VECTORS |
| bool "Install crash dump exception vectors" |
| depends on SPL |
| help |
| The default exception vector table is only used for the crash |
| dump, but still takes quite a lot of space in the image size. |
| |
| Say N here if you are running out of code space in the image |
| and want to save some space at the cost of less debugging info. |
| |
| config ARMV8_MULTIENTRY |
| bool "Enable multiple CPUs to enter into U-Boot" |
| |
| config ARMV8_SET_SMPEN |
| bool "Enable data coherency with other cores in cluster" |
| help |
| Say Y here if there is not any trust firmware to set |
| CPUECTLR_EL1.SMPEN bit before U-Boot. |
| |
| For A53, it enables data coherency with other cores in the |
| cluster, and for A57/A72, it enables receiving of instruction |
| cache and TLB maintenance operations. |
| Cortex A53/57/72 cores require CPUECTLR_EL1.SMPEN set even |
| for single core systems. Unfortunately write access to this |
| register may be controlled by EL3/EL2 firmware. To be more |
| precise, by default (if there is EL2/EL3 firmware running) |
| this register is RO for NS EL1. |
| This switch can be used to avoid writing to CPUECTLR_EL1, |
| it can be safely enabled when EL2/EL3 initialized SMPEN bit |
| or when CPU implementation doesn't include that register. |
| |
| config ARMV8_SWITCH_TO_EL1 |
| bool "Enable switching to running in EL1" |
| help |
| In some circumstances we need to switch to running in EL1. |
| Enable this option to have U-Boot switch to EL1. |
| |
| config ARMV8_SPIN_TABLE |
| bool "Support spin-table enable method" |
| depends on ARMV8_MULTIENTRY && OF_LIBFDT |
| help |
| Say Y here to support "spin-table" enable method for booting Linux. |
| |
| To use this feature, you must do: |
| - Specify enable-method = "spin-table" in each CPU node in the |
| Device Tree you are using to boot the kernel |
| - Bring secondary CPUs into U-Boot proper in a board specific |
| manner. This must be done *after* relocation. Otherwise, the |
| secondary CPUs will spin in unprotected memory area because the |
| master CPU protects the relocated spin code. |
| |
| U-Boot automatically does: |
| - Set "cpu-release-addr" property of each CPU node |
| (overwrites it if already exists). |
| - Reserve the code for the spin-table and the release address |
| via a /memreserve/ region in the Device Tree. |
| |
| menu "ARMv8 secure monitor firmware" |
| config ARMV8_SEC_FIRMWARE_SUPPORT |
| bool "Enable ARMv8 secure monitor firmware framework support" |
| select FIT |
| select OF_LIBFDT |
| help |
| This framework is aimed at making secure monitor firmware load |
| process brief. |
| Note: Only FIT format image is supported. |
| You should prepare and provide the below information: |
| - Address of secure firmware. |
| - Address to hold the return address from secure firmware. |
| - Secure firmware FIT image related information. |
| Such as: SEC_FIRMWARE_FIT_IMAGE and SEC_FIRMWARE_FIT_CNF_NAME |
| - The target exception level that secure monitor firmware will |
| return to. |
| |
| config SPL_ARMV8_SEC_FIRMWARE_SUPPORT |
| bool "Enable ARMv8 secure monitor firmware framework support for SPL" |
| select SPL_FIT |
| select SPL_OF_LIBFDT |
| help |
| Say Y here to support this framework in SPL phase. |
| |
| config SPL_RECOVER_DATA_SECTION |
| bool "save/restore SPL data section" |
| help |
| Say Y here to save SPL data section for cold boot, and restore |
| at warm boot in SPL phase. |
| |
| config SEC_FIRMWARE_ARMV8_PSCI |
| bool "PSCI implementation in secure monitor firmware" |
| depends on ARMV8_SEC_FIRMWARE_SUPPORT || SPL_ARMV8_SEC_FIRMWARE_SUPPORT |
| depends on ARMV8_PSCI=n |
| help |
| This config enables the ARMv8 PSCI implementation in secure monitor |
| firmware. This is a private PSCI implementation and different from |
| those implemented under the common ARMv8 PSCI framework. |
| |
| config ARMV8_SEC_FIRMWARE_ERET_ADDR_REVERT |
| bool "ARMv8 secure monitor firmware ERET address byteorder swap" |
| depends on ARMV8_SEC_FIRMWARE_SUPPORT || SPL_ARMV8_SEC_FIRMWARE_SUPPORT |
| help |
| Say Y here when the endianness of the register or memory holding the |
| Secure firmware exception return address is different with core's. |
| |
| endmenu |
| |
| config PSCI_RESET |
| bool "Use PSCI for reset and shutdown" |
| default y |
| select ARM_SMCCC if OF_CONTROL |
| depends on !ARCH_APPLE && !ARCH_BCM283X && !ARCH_EXYNOS7 && \ |
| !TARGET_LS2080AQDS && \ |
| !TARGET_LS2080ARDB && !TARGET_LS2080A_EMU && \ |
| !TARGET_LS1088ARDB && !TARGET_LS1088AQDS && \ |
| !TARGET_LS1012ARDB && !TARGET_LS1012AFRDM && \ |
| !TARGET_LS1012A2G5RDB && !TARGET_LS1012AQDS && \ |
| !TARGET_LS1012AFRWY && \ |
| !TARGET_LS1028ARDB && !TARGET_LS1028AQDS && \ |
| !TARGET_LS1043ARDB && !TARGET_LS1043AQDS && \ |
| !TARGET_LS1046ARDB && !TARGET_LS1046AQDS && \ |
| !TARGET_LS1046AFRWY && \ |
| !TARGET_LS2081ARDB && !TARGET_LX2160ARDB && \ |
| !TARGET_LX2160AQDS && !TARGET_LX2162AQDS && \ |
| !ARCH_UNIPHIER |
| help |
| Most armv8 systems have PSCI support enabled in EL3, either through |
| ARM Trusted Firmware or other firmware. |
| |
| On these systems, we do not need to implement system reset manually, |
| but can instead rely on higher level firmware to deal with it. |
| |
| Select Y here to make use of PSCI calls for system reset |
| |
| config SYS_HAS_ARMV8_SECURE_BASE |
| bool |
| |
| config ARMV8_PSCI |
| bool "Enable PSCI support" if EXPERT |
| help |
| PSCI is Power State Coordination Interface defined by ARM. |
| The PSCI in U-boot provides a general framework and each platform |
| can implement their own specific PSCI functions. |
| Say Y here to enable PSCI support on ARMv8 platform. |
| |
| config ARMV8_PSCI_NR_CPUS |
| int "Maximum supported CPUs for PSCI" |
| depends on ARMV8_PSCI |
| default 4 |
| help |
| The maximum number of CPUs supported in the PSCI firmware. |
| It is no problem to set a larger value than the number of CPUs in |
| the actual hardware implementation. |
| |
| config ARMV8_PSCI_CPUS_PER_CLUSTER |
| int "Number of CPUs per cluster" |
| depends on ARMV8_PSCI |
| default 0 |
| help |
| The number of CPUs per cluster, suppose each cluster has same number |
| of CPU cores, platforms with asymmetric clusters don't apply here. |
| A value 0 or no definition of it works for single cluster system. |
| System with multi-cluster should difine their own exact value. |
| |
| config ARMV8_PSCI_RELOCATE |
| bool "Relocate PSCI code" |
| depends on ARMV8_PSCI |
| depends on SYS_HAS_ARMV8_SECURE_BASE |
| help |
| Relocate PSCI code, for example to a secure memory on the SoC. If not |
| set, the PSCI sections are placed together with the u-boot and the |
| regions will be marked as reserved before linux is started. |
| |
| config ARMV8_SECURE_BASE |
| hex "Secure address for PSCI image" |
| depends on ARMV8_PSCI_RELOCATE |
| default 0x18000000 if ARCH_LS1028A |
| help |
| Address for placing the PSCI text, data and stack sections. |
| |
| |
| config ARMV8_EA_EL3_FIRST |
| bool "External aborts and SError interrupt exception are taken in EL3" |
| help |
| Exception handling at all exception levels for External Abort and |
| SError interrupt exception are taken in EL3. |
| |
| menuconfig ARMV8_CRYPTO |
| bool "ARM64 Accelerated Cryptographic Algorithms" |
| |
| if ARMV8_CRYPTO |
| |
| config ARMV8_CE_SHA1 |
| bool "SHA-1 digest algorithm (ARMv8 Crypto Extensions)" |
| default y if SHA1 |
| |
| endif |
| |
| endif |