| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (c) 2011 The Chromium OS Authors. |
| * (C) Copyright 2002 |
| * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se> |
| */ |
| |
| /* |
| * Linux x86 zImage and bzImage loading |
| * |
| * based on the procdure described in |
| * linux/Documentation/i386/boot.txt |
| */ |
| |
| #define LOG_CATEGORY LOGC_BOOT |
| |
| #include <common.h> |
| #include <bootm.h> |
| #include <command.h> |
| #include <env.h> |
| #include <init.h> |
| #include <irq_func.h> |
| #include <log.h> |
| #include <malloc.h> |
| #include <mapmem.h> |
| #include <acpi/acpi_table.h> |
| #include <asm/io.h> |
| #include <asm/ptrace.h> |
| #include <asm/zimage.h> |
| #include <asm/byteorder.h> |
| #include <asm/bootm.h> |
| #include <asm/bootparam.h> |
| #include <asm/efi.h> |
| #include <asm/global_data.h> |
| #ifdef CONFIG_SYS_COREBOOT |
| #include <asm/arch/timestamp.h> |
| #endif |
| #include <linux/compiler.h> |
| #include <linux/ctype.h> |
| #include <linux/libfdt.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| /* |
| * Memory lay-out: |
| * |
| * relative to setup_base (which is 0x90000 currently) |
| * |
| * 0x0000-0x7FFF Real mode kernel |
| * 0x8000-0x8FFF Stack and heap |
| * 0x9000-0x90FF Kernel command line |
| */ |
| #define DEFAULT_SETUP_BASE 0x90000 |
| #define COMMAND_LINE_OFFSET 0x9000 |
| #define HEAP_END_OFFSET 0x8e00 |
| |
| #define COMMAND_LINE_SIZE 2048 |
| |
| /* Current state of the boot */ |
| struct zboot_state state; |
| |
| static void build_command_line(char *command_line, int auto_boot) |
| { |
| char *env_command_line; |
| |
| command_line[0] = '\0'; |
| |
| env_command_line = env_get("bootargs"); |
| |
| /* set console= argument if we use a serial console */ |
| if (!strstr(env_command_line, "console=")) { |
| if (!strcmp(env_get("stdout"), "serial")) { |
| |
| /* We seem to use serial console */ |
| sprintf(command_line, "console=ttyS0,%s ", |
| env_get("baudrate")); |
| } |
| } |
| |
| if (auto_boot) |
| strcat(command_line, "auto "); |
| |
| if (env_command_line) |
| strcat(command_line, env_command_line); |
| #ifdef DEBUG |
| printf("Kernel command line:"); |
| puts(command_line); |
| printf("\n"); |
| #endif |
| } |
| |
| static int kernel_magic_ok(struct setup_header *hdr) |
| { |
| if (KERNEL_MAGIC != hdr->boot_flag) { |
| printf("Error: Invalid Boot Flag " |
| "(found 0x%04x, expected 0x%04x)\n", |
| hdr->boot_flag, KERNEL_MAGIC); |
| return 0; |
| } else { |
| printf("Valid Boot Flag\n"); |
| return 1; |
| } |
| } |
| |
| static int get_boot_protocol(struct setup_header *hdr, bool verbose) |
| { |
| if (hdr->header == KERNEL_V2_MAGIC) { |
| if (verbose) |
| printf("Magic signature found\n"); |
| return hdr->version; |
| } else { |
| /* Very old kernel */ |
| if (verbose) |
| printf("Magic signature not found\n"); |
| return 0x0100; |
| } |
| } |
| |
| static int setup_device_tree(struct setup_header *hdr, const void *fdt_blob) |
| { |
| int bootproto = get_boot_protocol(hdr, false); |
| struct setup_data *sd; |
| int size; |
| |
| if (bootproto < 0x0209) |
| return -ENOTSUPP; |
| |
| if (!fdt_blob) |
| return 0; |
| |
| size = fdt_totalsize(fdt_blob); |
| if (size < 0) |
| return -EINVAL; |
| |
| size += sizeof(struct setup_data); |
| sd = (struct setup_data *)malloc(size); |
| if (!sd) { |
| printf("Not enough memory for DTB setup data\n"); |
| return -ENOMEM; |
| } |
| |
| sd->next = hdr->setup_data; |
| sd->type = SETUP_DTB; |
| sd->len = fdt_totalsize(fdt_blob); |
| memcpy(sd->data, fdt_blob, sd->len); |
| hdr->setup_data = (unsigned long)sd; |
| |
| return 0; |
| } |
| |
| const char *zimage_get_kernel_version(struct boot_params *params, |
| void *kernel_base) |
| { |
| struct setup_header *hdr = ¶ms->hdr; |
| int bootproto; |
| const char *s, *end; |
| |
| bootproto = get_boot_protocol(hdr, false); |
| log_debug("bootproto %x, hdr->setup_sects %x\n", bootproto, |
| hdr->setup_sects); |
| if (bootproto < 0x0200 || hdr->setup_sects < 15) |
| return NULL; |
| |
| /* sanity-check the kernel version in case it is missing */ |
| log_debug("hdr->kernel_version %x, str at %p\n", hdr->kernel_version, |
| kernel_base + hdr->kernel_version + 0x200); |
| for (s = kernel_base + hdr->kernel_version + 0x200, end = s + 0x100; *s; |
| s++) { |
| if (!isprint(*s)) |
| return NULL; |
| } |
| |
| return kernel_base + hdr->kernel_version + 0x200; |
| } |
| |
| struct boot_params *load_zimage(char *image, unsigned long kernel_size, |
| ulong *load_addressp) |
| { |
| struct boot_params *setup_base; |
| const char *version; |
| int setup_size; |
| int bootproto; |
| int big_image; |
| |
| struct boot_params *params = (struct boot_params *)image; |
| struct setup_header *hdr = ¶ms->hdr; |
| |
| /* base address for real-mode segment */ |
| setup_base = (struct boot_params *)DEFAULT_SETUP_BASE; |
| |
| if (!kernel_magic_ok(hdr)) |
| return 0; |
| |
| /* determine size of setup */ |
| if (0 == hdr->setup_sects) { |
| log_warning("Setup Sectors = 0 (defaulting to 4)\n"); |
| setup_size = 5 * 512; |
| } else { |
| setup_size = (hdr->setup_sects + 1) * 512; |
| } |
| |
| log_debug("Setup Size = 0x%8.8lx\n", (ulong)setup_size); |
| |
| if (setup_size > SETUP_MAX_SIZE) |
| printf("Error: Setup is too large (%d bytes)\n", setup_size); |
| |
| /* determine boot protocol version */ |
| bootproto = get_boot_protocol(hdr, true); |
| |
| log_debug("Using boot protocol version %x.%02x\n", |
| (bootproto & 0xff00) >> 8, bootproto & 0xff); |
| |
| version = zimage_get_kernel_version(params, image); |
| if (version) |
| printf("Linux kernel version %s\n", version); |
| else |
| printf("Setup Sectors < 15 - Cannot print kernel version\n"); |
| |
| /* Determine image type */ |
| big_image = (bootproto >= 0x0200) && |
| (hdr->loadflags & BIG_KERNEL_FLAG); |
| |
| /* Determine load address */ |
| if (big_image) |
| *load_addressp = BZIMAGE_LOAD_ADDR; |
| else |
| *load_addressp = ZIMAGE_LOAD_ADDR; |
| |
| printf("Building boot_params at 0x%8.8lx\n", (ulong)setup_base); |
| memset(setup_base, 0, sizeof(*setup_base)); |
| setup_base->hdr = params->hdr; |
| |
| if (bootproto >= 0x0204) |
| kernel_size = hdr->syssize * 16; |
| else |
| kernel_size -= setup_size; |
| |
| if (bootproto == 0x0100) { |
| /* |
| * A very old kernel MUST have its real-mode code |
| * loaded at 0x90000 |
| */ |
| if ((ulong)setup_base != 0x90000) { |
| /* Copy the real-mode kernel */ |
| memmove((void *)0x90000, setup_base, setup_size); |
| |
| /* Copy the command line */ |
| memmove((void *)0x99000, |
| (u8 *)setup_base + COMMAND_LINE_OFFSET, |
| COMMAND_LINE_SIZE); |
| |
| /* Relocated */ |
| setup_base = (struct boot_params *)0x90000; |
| } |
| |
| /* It is recommended to clear memory up to the 32K mark */ |
| memset((u8 *)0x90000 + setup_size, 0, |
| SETUP_MAX_SIZE - setup_size); |
| } |
| |
| if (big_image) { |
| if (kernel_size > BZIMAGE_MAX_SIZE) { |
| printf("Error: bzImage kernel too big! " |
| "(size: %ld, max: %d)\n", |
| kernel_size, BZIMAGE_MAX_SIZE); |
| return 0; |
| } |
| } else if ((kernel_size) > ZIMAGE_MAX_SIZE) { |
| printf("Error: zImage kernel too big! (size: %ld, max: %d)\n", |
| kernel_size, ZIMAGE_MAX_SIZE); |
| return 0; |
| } |
| |
| printf("Loading %s at address %lx (%ld bytes)\n", |
| big_image ? "bzImage" : "zImage", *load_addressp, kernel_size); |
| |
| memmove((void *)*load_addressp, image + setup_size, kernel_size); |
| |
| return setup_base; |
| } |
| |
| int setup_zimage(struct boot_params *setup_base, char *cmd_line, int auto_boot, |
| ulong initrd_addr, ulong initrd_size, ulong cmdline_force) |
| { |
| struct setup_header *hdr = &setup_base->hdr; |
| int bootproto = get_boot_protocol(hdr, false); |
| |
| log_debug("Setup E820 entries\n"); |
| if (IS_ENABLED(CONFIG_COREBOOT_SYSINFO)) { |
| setup_base->e820_entries = cb_install_e820_map( |
| ARRAY_SIZE(setup_base->e820_map), setup_base->e820_map); |
| } else { |
| setup_base->e820_entries = install_e820_map( |
| ARRAY_SIZE(setup_base->e820_map), setup_base->e820_map); |
| } |
| |
| if (bootproto == 0x0100) { |
| setup_base->screen_info.cl_magic = COMMAND_LINE_MAGIC; |
| setup_base->screen_info.cl_offset = COMMAND_LINE_OFFSET; |
| } |
| if (bootproto >= 0x0200) { |
| hdr->type_of_loader = 0x80; /* U-Boot version 0 */ |
| if (initrd_addr) { |
| printf("Initial RAM disk at linear address " |
| "0x%08lx, size %ld bytes\n", |
| initrd_addr, initrd_size); |
| |
| hdr->ramdisk_image = initrd_addr; |
| hdr->ramdisk_size = initrd_size; |
| } |
| } |
| |
| if (bootproto >= 0x0201) { |
| hdr->heap_end_ptr = HEAP_END_OFFSET; |
| hdr->loadflags |= HEAP_FLAG; |
| } |
| |
| if (cmd_line) { |
| int max_size = 0xff; |
| int ret; |
| |
| log_debug("Setup cmdline\n"); |
| if (bootproto >= 0x0206) |
| max_size = hdr->cmdline_size; |
| if (bootproto >= 0x0202) { |
| hdr->cmd_line_ptr = (uintptr_t)cmd_line; |
| } else if (bootproto >= 0x0200) { |
| setup_base->screen_info.cl_magic = COMMAND_LINE_MAGIC; |
| setup_base->screen_info.cl_offset = |
| (uintptr_t)cmd_line - (uintptr_t)setup_base; |
| |
| hdr->setup_move_size = 0x9100; |
| } |
| |
| /* build command line at COMMAND_LINE_OFFSET */ |
| if (cmdline_force) |
| strcpy(cmd_line, (char *)cmdline_force); |
| else |
| build_command_line(cmd_line, auto_boot); |
| if (IS_ENABLED(CONFIG_CMD_BOOTM)) { |
| ret = bootm_process_cmdline(cmd_line, max_size, |
| BOOTM_CL_ALL); |
| if (ret) { |
| printf("Cmdline setup failed (max_size=%x, bootproto=%x, err=%d)\n", |
| max_size, bootproto, ret); |
| return ret; |
| } |
| } |
| printf("Kernel command line: \""); |
| puts(cmd_line); |
| printf("\"\n"); |
| } |
| |
| if (IS_ENABLED(CONFIG_INTEL_MID) && bootproto >= 0x0207) |
| hdr->hardware_subarch = X86_SUBARCH_INTEL_MID; |
| |
| if (IS_ENABLED(CONFIG_GENERATE_ACPI_TABLE)) |
| setup_base->acpi_rsdp_addr = acpi_get_rsdp_addr(); |
| |
| log_debug("Setup devicetree\n"); |
| setup_device_tree(hdr, (const void *)env_get_hex("fdtaddr", 0)); |
| setup_video(&setup_base->screen_info); |
| |
| if (IS_ENABLED(CONFIG_EFI_STUB)) |
| setup_efi_info(&setup_base->efi_info); |
| |
| return 0; |
| } |
| |
| int zboot_load(void) |
| { |
| struct boot_params *base_ptr; |
| int ret; |
| |
| if (state.base_ptr) { |
| struct boot_params *from = (struct boot_params *)state.base_ptr; |
| |
| base_ptr = (struct boot_params *)DEFAULT_SETUP_BASE; |
| log_debug("Building boot_params at 0x%8.8lx\n", |
| (ulong)base_ptr); |
| memset(base_ptr, '\0', sizeof(*base_ptr)); |
| base_ptr->hdr = from->hdr; |
| } else { |
| base_ptr = load_zimage((void *)state.bzimage_addr, state.bzimage_size, |
| &state.load_address); |
| if (!base_ptr) { |
| puts("## Kernel loading failed ...\n"); |
| return -EINVAL; |
| } |
| } |
| state.base_ptr = base_ptr; |
| |
| ret = env_set_hex("zbootbase", map_to_sysmem(state.base_ptr)); |
| if (!ret) |
| ret = env_set_hex("zbootaddr", state.load_address); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| |
| int zboot_setup(void) |
| { |
| struct boot_params *base_ptr = state.base_ptr; |
| int ret; |
| |
| ret = setup_zimage(base_ptr, (char *)base_ptr + COMMAND_LINE_OFFSET, |
| 0, state.initrd_addr, state.initrd_size, |
| (ulong)state.cmdline); |
| if (ret) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| int zboot_go(void) |
| { |
| struct boot_params *params = state.base_ptr; |
| struct setup_header *hdr = ¶ms->hdr; |
| bool image_64bit; |
| ulong entry; |
| int ret; |
| |
| disable_interrupts(); |
| |
| entry = state.load_address; |
| image_64bit = false; |
| if (IS_ENABLED(CONFIG_X86_RUN_64BIT) && |
| (hdr->xloadflags & XLF_KERNEL_64)) { |
| entry += 0x200; |
| image_64bit = true; |
| } |
| |
| /* we assume that the kernel is in place */ |
| ret = boot_linux_kernel((ulong)state.base_ptr, entry, image_64bit); |
| |
| return ret; |
| } |
| |
| int zboot_run(ulong addr, ulong size, ulong initrd, ulong initrd_size, |
| ulong base, char *cmdline) |
| { |
| int ret; |
| |
| zboot_start(addr, size, initrd, initrd_size, base, cmdline); |
| ret = zboot_load(); |
| if (ret) |
| return log_msg_ret("ld", ret); |
| ret = zboot_setup(); |
| if (ret) |
| return log_msg_ret("set", ret); |
| ret = zboot_go(); |
| if (ret) |
| return log_msg_ret("go", ret); |
| |
| return -EFAULT; |
| } |
| |
| static void print_num(const char *name, ulong value) |
| { |
| printf("%-20s: %lx\n", name, value); |
| } |
| |
| static void print_num64(const char *name, u64 value) |
| { |
| printf("%-20s: %llx\n", name, value); |
| } |
| |
| static const char *const e820_type_name[E820_COUNT] = { |
| [E820_RAM] = "RAM", |
| [E820_RESERVED] = "Reserved", |
| [E820_ACPI] = "ACPI", |
| [E820_NVS] = "ACPI NVS", |
| [E820_UNUSABLE] = "Unusable", |
| }; |
| |
| static const char *const bootloader_id[] = { |
| "LILO", |
| "Loadlin", |
| "bootsect-loader", |
| "Syslinux", |
| "Etherboot/gPXE/iPXE", |
| "ELILO", |
| "undefined", |
| "GRUB", |
| "U-Boot", |
| "Xen", |
| "Gujin", |
| "Qemu", |
| "Arcturus Networks uCbootloader", |
| "kexec-tools", |
| "Extended", |
| "Special", |
| "Reserved", |
| "Minimal Linux Bootloader", |
| "OVMF UEFI virtualization stack", |
| }; |
| |
| struct flag_info { |
| uint bit; |
| const char *name; |
| }; |
| |
| static struct flag_info load_flags[] = { |
| { LOADED_HIGH, "loaded-high" }, |
| { QUIET_FLAG, "quiet" }, |
| { KEEP_SEGMENTS, "keep-segments" }, |
| { CAN_USE_HEAP, "can-use-heap" }, |
| }; |
| |
| static struct flag_info xload_flags[] = { |
| { XLF_KERNEL_64, "64-bit-entry" }, |
| { XLF_CAN_BE_LOADED_ABOVE_4G, "can-load-above-4gb" }, |
| { XLF_EFI_HANDOVER_32, "32-efi-handoff" }, |
| { XLF_EFI_HANDOVER_64, "64-efi-handoff" }, |
| { XLF_EFI_KEXEC, "kexec-efi-runtime" }, |
| }; |
| |
| static void print_flags(struct flag_info *flags, int count, uint value) |
| { |
| int i; |
| |
| printf("%-20s:", ""); |
| for (i = 0; i < count; i++) { |
| uint mask = flags[i].bit; |
| |
| if (value & mask) |
| printf(" %s", flags[i].name); |
| } |
| printf("\n"); |
| } |
| |
| static void show_loader(struct setup_header *hdr) |
| { |
| bool version_valid = false; |
| int type, version; |
| const char *name; |
| |
| type = hdr->type_of_loader >> 4; |
| version = hdr->type_of_loader & 0xf; |
| if (type == 0xe) |
| type = 0x10 + hdr->ext_loader_type; |
| version |= hdr->ext_loader_ver << 4; |
| if (!hdr->type_of_loader) { |
| name = "pre-2.00 bootloader"; |
| } else if (hdr->type_of_loader == 0xff) { |
| name = "unknown"; |
| } else if (type < ARRAY_SIZE(bootloader_id)) { |
| name = bootloader_id[type]; |
| version_valid = true; |
| } else { |
| name = "undefined"; |
| } |
| printf("%20s %s", "", name); |
| if (version_valid) |
| printf(", version %x", version); |
| printf("\n"); |
| } |
| |
| void zimage_dump(struct boot_params *base_ptr, bool show_cmdline) |
| { |
| struct setup_header *hdr; |
| const char *version; |
| int i; |
| |
| printf("Setup located at %p:\n\n", base_ptr); |
| print_num64("ACPI RSDP addr", base_ptr->acpi_rsdp_addr); |
| |
| printf("E820: %d entries\n", base_ptr->e820_entries); |
| if (base_ptr->e820_entries) { |
| printf("%12s %10s %s\n", "Addr", "Size", "Type"); |
| for (i = 0; i < base_ptr->e820_entries; i++) { |
| struct e820_entry *entry = &base_ptr->e820_map[i]; |
| |
| printf("%12llx %10llx %s\n", entry->addr, entry->size, |
| entry->type < E820_COUNT ? |
| e820_type_name[entry->type] : |
| simple_itoa(entry->type)); |
| } |
| } |
| |
| hdr = &base_ptr->hdr; |
| print_num("Setup sectors", hdr->setup_sects); |
| print_num("Root flags", hdr->root_flags); |
| print_num("Sys size", hdr->syssize); |
| print_num("RAM size", hdr->ram_size); |
| print_num("Video mode", hdr->vid_mode); |
| print_num("Root dev", hdr->root_dev); |
| print_num("Boot flag", hdr->boot_flag); |
| print_num("Jump", hdr->jump); |
| print_num("Header", hdr->header); |
| if (hdr->header == KERNEL_V2_MAGIC) |
| printf("%-20s %s\n", "", "Kernel V2"); |
| else |
| printf("%-20s %s\n", "", "Ancient kernel, using version 100"); |
| print_num("Version", hdr->version); |
| print_num("Real mode switch", hdr->realmode_swtch); |
| print_num("Start sys seg", hdr->start_sys_seg); |
| print_num("Kernel version", hdr->kernel_version); |
| version = zimage_get_kernel_version(base_ptr, |
| (void *)state.bzimage_addr); |
| if (version) |
| printf(" @%p: %s\n", version, version); |
| print_num("Type of loader", hdr->type_of_loader); |
| show_loader(hdr); |
| print_num("Load flags", hdr->loadflags); |
| print_flags(load_flags, ARRAY_SIZE(load_flags), hdr->loadflags); |
| print_num("Setup move size", hdr->setup_move_size); |
| print_num("Code32 start", hdr->code32_start); |
| print_num("Ramdisk image", hdr->ramdisk_image); |
| print_num("Ramdisk size", hdr->ramdisk_size); |
| print_num("Bootsect kludge", hdr->bootsect_kludge); |
| print_num("Heap end ptr", hdr->heap_end_ptr); |
| print_num("Ext loader ver", hdr->ext_loader_ver); |
| print_num("Ext loader type", hdr->ext_loader_type); |
| print_num("Command line ptr", hdr->cmd_line_ptr); |
| if (show_cmdline && hdr->cmd_line_ptr) { |
| printf(" "); |
| /* Use puts() to avoid limits from CONFIG_SYS_PBSIZE */ |
| puts((char *)(ulong)hdr->cmd_line_ptr); |
| printf("\n"); |
| } |
| print_num("Initrd addr max", hdr->initrd_addr_max); |
| print_num("Kernel alignment", hdr->kernel_alignment); |
| print_num("Relocatable kernel", hdr->relocatable_kernel); |
| print_num("Min alignment", hdr->min_alignment); |
| if (hdr->min_alignment) |
| printf("%-20s: %x\n", "", 1 << hdr->min_alignment); |
| print_num("Xload flags", hdr->xloadflags); |
| print_flags(xload_flags, ARRAY_SIZE(xload_flags), hdr->xloadflags); |
| print_num("Cmdline size", hdr->cmdline_size); |
| print_num("Hardware subarch", hdr->hardware_subarch); |
| print_num64("HW subarch data", hdr->hardware_subarch_data); |
| print_num("Payload offset", hdr->payload_offset); |
| print_num("Payload length", hdr->payload_length); |
| print_num64("Setup data", hdr->setup_data); |
| print_num64("Pref address", hdr->pref_address); |
| print_num("Init size", hdr->init_size); |
| print_num("Handover offset", hdr->handover_offset); |
| if (get_boot_protocol(hdr, false) >= 0x215) |
| print_num("Kernel info offset", hdr->kernel_info_offset); |
| } |
| |
| void zboot_start(ulong bzimage_addr, ulong bzimage_size, ulong initrd_addr, |
| ulong initrd_size, ulong base_addr, const char *cmdline) |
| { |
| memset(&state, '\0', sizeof(state)); |
| |
| state.bzimage_size = bzimage_size; |
| state.initrd_addr = initrd_addr; |
| state.initrd_size = initrd_size; |
| if (base_addr) { |
| state.base_ptr = map_sysmem(base_addr, 0); |
| state.load_address = bzimage_addr; |
| } else { |
| state.bzimage_addr = bzimage_addr; |
| } |
| state.cmdline = cmdline; |
| } |
| |
| void zboot_info(void) |
| { |
| printf("Kernel loaded at %08lx, setup_base=%p\n", |
| state.load_address, state.base_ptr); |
| } |