| if ROCKCHIP_RK3588 |
| |
| config TARGET_EVB_RK3588 |
| bool "Rockchip EVB1 v10" |
| select BOARD_LATE_INIT |
| help |
| RK3588 EVB is a evaluation board for Rockchp RK3588. |
| |
| config TARGET_JAGUAR_RK3588 |
| bool "Theobroma Systems SBC-RK3588-AMR (Jaguar)" |
| select BOARD_LATE_INIT |
| help |
| The SBC-RK3588-AMR is a Single Board Computer designed by |
| Theobroma Systems for autonomous mobile robots. |
| |
| It provides the following features: |
| * up to 32GB LDDR4 |
| * up to 128GB on-module eMMC (with 8-bit 1.8V interface) |
| * SD card |
| * Gigabit Ethernet |
| * 1x USB-A 2.0 host |
| * PCIe M.2 2230 Key M (Gen 2 1-lane) for WiFi+BT |
| * PCIe M.2 2280 Key M (Gen 3 4-lane) for NVMe |
| * CAN |
| * RS485 UART |
| * 2x USB Type-C 3.1 host/device |
| * HDMI output |
| * 2x camera connectors (MIPI-CSI 2-lane + I2C/SPI for IMUs + GPIOs) |
| * EEPROM |
| * Secure Element |
| * ATtiny companion controller implementing: |
| - low-power RTC functionality (ISL1208 emulation) |
| - fan controller (AMC6821 emulation) |
| * 80-pin Mezzanine connector |
| |
| config TARGET_NANOPCT6_RK3588 |
| bool "FriendlyElec NanoPC-T6 RK3588 board" |
| select BOARD_LATE_INIT |
| help |
| The NanoPC-T6 is a Rockchip RK3588 based SBC by FriendlyElec. |
| |
| There are four variants depending on the DRAM size: 4G/32GB eMMC, |
| 8G/64GB eMMC, 16G/16MB SPI NOR, and 16G/256GB eMMC/16MB SPI NOR |
| |
| Specifications: |
| |
| CPU: Rockchip RK3588, 4x Cortex-A76 (up to 2.4GHz) |
| + 4x Cortex-A55 (up to 1.8GHz) |
| GPU: Mali-G610 MP4 |
| VPU: 8K@60fps H.265 and VP9 decoder, 8K@30fps H.264 decoder, |
| 4K@60fps AV1 decoder, 8K@30fps H.264 and H.265 encoder |
| NPU: 6TOPs, supports INT4/INT8/INT16/FP16 |
| RAM: 64-bit 4GB/8GB/16GB LPDDR4X at 2133MHz |
| eMMC: 0GB/32GB/64GB/256GB HS400 |
| MicroSD Slot: MicroSD SDR104 |
| PCIe 3.0: M.2 M-Key x1, PCIe 3.0 x4 for NVMe SSDs up to 2,500 MB/s |
| Ethernet: PCIe 2.5G 2x Ethernet (RTL8125BG) |
| PCIe 2.1: M.2 E-Key x1, PCIe 2.1 x1 and USB2.0 Host, |
| supports M.2 WiFi and Bluetooth |
| 4G Module: MiniPCIe x1, MicroSIM Card Slot x1 |
| Audio Out: 3.5mm jack for stereo headphone output |
| Audio In: 2.0mm PH-2A connector for analog microphone input |
| Video Input: standard HDMI input port, up to 4Kp60 |
| 2x 4-lane MIPI-CSI, compatible with MIPI V1.2 |
| Video Output: 2x standard HDMI output ports compatible with HDMI2.1, |
| HDMI2.0, and HDMI1.4 |
| 2x 4-lane MIPI-DSI, compatible with MIPI DPHY 2.0 or CPHY 1.1 |
| USB-A: USB 3.0, Type A |
| USB-C: Full function USB Type‑C port, DP display up to 4Kp60, USB 3.0 |
| 40-pin 2.54mm header connector: up to 2x SPIs, 6x UARTs, 1x I2Cs, |
| 8x PWMs, 2x I2Ss, 28x GPIOs |
| Debug UART: 3 Pin 2.54mm header, 3V level, 1500000bps |
| Onboard IR receiver: 38KHz carrier frequency |
| RTC Battery: 2 Pin 1.27/1.25mm RTC battery connector for low power |
| RTC IC HYM8563TS |
| 5V Fan connector |
| Working Temperature: 0C to 70C |
| Power: 5.5*2.1mm DC Jack, 12VDC input |
| Dimensions: 110x80x1.6mm (without case) / 86x114.5x30mm (with case) |
| |
| config TARGET_RK3588_NEU6 |
| bool "Edgeble Neural Compute Module 6(Neu6) SoM" |
| select BOARD_LATE_INIT |
| help |
| Neu6A: |
| Neural Compute Module 6A(Neu6A) is a 96boards SoM-CB compute module |
| based on Rockchip RK3588 from Edgeble AI. |
| |
| Neu6A-IO: |
| Neural Compute Module 6A(Neu6A) IO board is an industrial form factor |
| IO board and Neu6a needs to mount on top of this IO board in order to |
| create complete Edgeble Neural Compute Module 6A(Neu6A) IO platform. |
| |
| Neu6B: |
| Neural Compute Module 6B(Neu6B) is a 96boards SoM-CB compute module |
| based on Rockchip RK3588J from Edgeble AI. |
| |
| Neu6A-IO: |
| Neural Compute Module 6B(Neu6B) IO board is an industrial form factor |
| IO board and Neu6a needs to mount on top of this IO board in order to |
| create complete Edgeble Neural Compute Module 6B(Neu6B) IO platform. |
| |
| config TARGET_ROCK5A_RK3588 |
| bool "Radxa ROCK5A RK3588 board" |
| select BOARD_LATE_INIT |
| help |
| Radxa ROCK5A is a Rockchip RK3588S based SBC (Single Board Computer) |
| by Radxa. |
| |
| There are tree variants depending on the DRAM size : 4G, 8G and 16G. |
| |
| Specification: |
| |
| Rockchip Rk3588S SoC |
| 4x ARM Cortex-A76, 4x ARM Cortex-A55 |
| 4/8/16GB memory LPDDR4x |
| Mali G610MC4 GPU |
| MIPI CSI 2 multiple lanes connector |
| 4-lane MIPI DSI connector |
| Audio – 3.5mm earphone jack |
| eMMC module connector |
| uSD slot (up to 128GB) |
| 2x USB 2.0, 2x USB 3.0 |
| 2x micro HDMI 2.1 ports, one up to 8Kp60, the other up to 4Kp60 |
| Gigabit Ethernet RJ45 with optional PoE support |
| 40-pin IO header including UART, SPI, I2C and 5V DC power in |
| USB PD over USB Type-C |
| Size: 85mm x 56mm (Raspberry Pi 4 form factor) |
| |
| config TARGET_ROCK5B_RK3588 |
| bool "Radxa ROCK5B RK3588 board" |
| select BOARD_LATE_INIT |
| help |
| Radxa ROCK5B is a Rockchip RK3588 based SBC (Single Board Computer) |
| by Radxa. |
| |
| There are tree variants depending on the DRAM size : 4G, 8G and 16G. |
| |
| Specification: |
| |
| Rockchip Rk3588 SoC |
| 4x ARM Cortex-A76, 4x ARM Cortex-A55 |
| 4/8/16GB memory LPDDR4x |
| Mali G610MC4 GPU |
| 2x MIPI CSI 2 multiple lanes connector |
| eMMC module connector |
| uSD slot (up to 128GB) |
| 2x USB 2.0 Type-A, 2x USB 3.0 Type-A, 1x USB 3.0 Type-C |
| 2x HDMI 2.1 output, 1x micro HDMI input |
| 2.5 Gbps Ethernet port |
| 40-pin IO header including UART, SPI, I2C and 5V DC power in |
| USB PD over USB Type-C |
| Size: 100mm x 72mm (Pico-ITX form factor) |
| |
| config TARGET_QUARTZPRO64_RK3588 |
| bool "Pine64 QuartzPro64 RK3588 board" |
| select BOARD_LATE_INIT |
| help |
| Pine64 QuartzPro64 is a Rockchip RK3588 based SBC (Single Board |
| Computer) by Pine64. |
| |
| config TARGET_TURINGRK1_RK3588 |
| bool "Turing Machines RK1 RK3588 board" |
| select BOARD_LATE_INIT |
| help |
| The Turing RK1 is a Rockchip RK3588 based SoM from Turing Machines. |
| |
| There are three variants depending on the DRAM size : 8G, 16G and 32G. |
| |
| Specifications: |
| |
| Rockchip RK3588 SoC |
| 4x ARM Cortex-A76, 4x ARM Cortex-A55 |
| 8/16/32GB memory LPDDR4x |
| Mali G610MC4 GPU |
| 32GB eMMC HS400 |
| 2x USB 2.0, 2x USB 3.0 |
| 2x MIPI CSI 4x lanes |
| 1x MIPI-DSI DPHY 2x lanes |
| PCIe 2.0 x1, PCIe 3.0 x4 |
| 1x HDMI 2.1 output, 1x DP 1.4 output |
| Gigabit Ethernet |
| Size: 69.6mm x 45mm (260-pin SO-DIMM connector) |
| |
| config ROCKCHIP_BOOT_MODE_REG |
| default 0xfd588080 |
| |
| config ROCKCHIP_STIMER_BASE |
| default 0xfd8c8000 |
| |
| config SYS_SOC |
| default "rk3588" |
| |
| config SYS_MALLOC_F_LEN |
| default 0x80000 |
| |
| source board/edgeble/neural-compute-module-6/Kconfig |
| source board/friendlyelec/nanopc-t6-rk3588/Kconfig |
| source board/pine64/quartzpro64-rk3588/Kconfig |
| source board/turing/turing-rk1-rk3588/Kconfig |
| source board/rockchip/evb_rk3588/Kconfig |
| source board/radxa/rock5a-rk3588s/Kconfig |
| source board/radxa/rock5b-rk3588/Kconfig |
| source board/theobroma-systems/jaguar_rk3588/Kconfig |
| |
| endif |