| /* SPDX-License-Identifier: GPL-2.0+ */ |
| /* |
| * Copyright (C) 2011 Samsung Electronics |
| * Heungjun Kim <riverful.kim@samsung.com> |
| * |
| * Configuation settings for the SAMSUNG TRATS (EXYNOS4210) board. |
| */ |
| |
| #ifndef __CONFIG_TRATS_H |
| #define __CONFIG_TRATS_H |
| |
| #include <configs/exynos4-common.h> |
| |
| #ifndef CONFIG_SYS_L2CACHE_OFF |
| #define CFG_SYS_PL310_BASE 0x10502000 |
| #endif |
| |
| /* TRATS has 4 banks of DRAM */ |
| #define CFG_SYS_SDRAM_BASE 0x40000000 |
| #define PHYS_SDRAM_1 CFG_SYS_SDRAM_BASE |
| #define SDRAM_BANK_SIZE (256 << 20) /* 256 MB */ |
| |
| /* Tizen - partitions definitions */ |
| #define PARTS_CSA "csa-mmc" |
| #define PARTS_BOOT "boot" |
| #define PARTS_QBOOT "qboot" |
| #define PARTS_CSC "csc" |
| #define PARTS_ROOT "platform" |
| #define PARTS_DATA "data" |
| #define PARTS_UMS "ums" |
| |
| #define PARTS_DEFAULT \ |
| "uuid_disk=${uuid_gpt_disk};" \ |
| "name="PARTS_CSA",start=5MiB,size=8MiB,uuid=${uuid_gpt_"PARTS_CSA"};" \ |
| "name="PARTS_BOOT",size=60MiB,uuid=${uuid_gpt_"PARTS_BOOT"};" \ |
| "name="PARTS_QBOOT",size=100MiB,uuid=${uuid_gpt_"PARTS_QBOOT"};" \ |
| "name="PARTS_CSC",size=150MiB,uuid=${uuid_gpt_"PARTS_CSC"};" \ |
| "name="PARTS_ROOT",size=1536MiB,uuid=${uuid_gpt_"PARTS_ROOT"};" \ |
| "name="PARTS_DATA",size=3000MiB,uuid=${uuid_gpt_"PARTS_DATA"};" \ |
| "name="PARTS_UMS",size=-,uuid=${uuid_gpt_"PARTS_UMS"}\0" \ |
| |
| #define CONFIG_DFU_ALT \ |
| "u-boot raw 0x80 0x400;" \ |
| "/uImage ext4 0 2;" \ |
| "/modem.bin ext4 0 2;" \ |
| "/exynos4210-trats.dtb ext4 0 2;" \ |
| ""PARTS_CSA" part 0 1;" \ |
| ""PARTS_BOOT" part 0 2;" \ |
| ""PARTS_QBOOT" part 0 3;" \ |
| ""PARTS_CSC" part 0 4;" \ |
| ""PARTS_ROOT" part 0 5;" \ |
| ""PARTS_DATA" part 0 6;" \ |
| ""PARTS_UMS" part 0 7;" \ |
| "params.bin raw 0x38 0x8;" \ |
| "/Image.itb ext4 0 2\0" |
| |
| #define CONFIG_EXTRA_ENV_SETTINGS \ |
| "bootk=" \ |
| "run loaduimage;" \ |
| "if run loaddtb; then " \ |
| "bootm 0x40007FC0 - ${fdtaddr};" \ |
| "fi;" \ |
| "bootm 0x40007FC0;\0" \ |
| "updatebackup=" \ |
| "mmc dev 0 2; mmc write 0 0x42100000 0 0x200;" \ |
| "mmc dev 0 0\0" \ |
| "updatebootb=" \ |
| "mmc read 0 0x42100000 0x80 0x200; run updatebackup\0" \ |
| "lpj=lpj=3981312\0" \ |
| "nfsboot=" \ |
| "setenv bootargs root=/dev/nfs rw " \ |
| "nfsroot=${nfsroot},nolock,tcp " \ |
| "ip=${ipaddr}:${serverip}:${gatewayip}:" \ |
| "${netmask}:generic:usb0:off ${console} ${meminfo}" \ |
| "; run bootk\0" \ |
| "ramfsboot=" \ |
| "setenv bootargs root=/dev/ram0 rw rootfstype=ext2 " \ |
| "${console} ${meminfo} " \ |
| "initrd=0x43000000,8M ramdisk=8192\0" \ |
| "mmcboot=" \ |
| "setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \ |
| "${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo}; " \ |
| "run bootk\0" \ |
| "bootchart=setenv opts init=/sbin/bootchartd; run bootcmd\0" \ |
| "boottrace=setenv opts initcall_debug; run bootcmd\0" \ |
| "mmcoops=mmc read 0 0x40000000 0x40 8; md 0x40000000 0x400\0" \ |
| "verify=n\0" \ |
| "rootfstype=ext4\0" \ |
| "console=console=ttySAC2,115200n8\0" \ |
| "meminfo=crashkernel=32M@0x50000000\0" \ |
| "nfsroot=/nfsroot/arm\0" \ |
| "bootblock=10\0" \ |
| "loaduimage=ext4load mmc ${mmcdev}:${mmcbootpart} 0x40007FC0 uImage\0" \ |
| "loaddtb=ext4load mmc ${mmcdev}:${mmcbootpart} ${fdtaddr} " \ |
| "${fdtfile}\0" \ |
| "mmcdev=0\0" \ |
| "mmcbootpart=2\0" \ |
| "mmcrootpart=5\0" \ |
| "opts=always_resume=1\0" \ |
| "partitions=" PARTS_DEFAULT \ |
| "dfu_alt_info=" CONFIG_DFU_ALT \ |
| "spladdr=0x40000100\0" \ |
| "splsize=0x200\0" \ |
| "splfile=falcon.bin\0" \ |
| "spl_export=" \ |
| "setexpr spl_imgsize ${splsize} + 8 ;" \ |
| "setenv spl_imgsize 0x${spl_imgsize};" \ |
| "setexpr spl_imgaddr ${spladdr} - 8 ;" \ |
| "setexpr spl_addr_tmp ${spladdr} - 4 ;" \ |
| "mw.b ${spl_imgaddr} 0x00 ${spl_imgsize};run loaduimage;" \ |
| "setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \ |
| "${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo};" \ |
| "spl export atags 0x40007FC0;" \ |
| "crc32 ${spladdr} ${splsize} ${spl_imgaddr};" \ |
| "mw.l ${spl_addr_tmp} ${splsize};" \ |
| "ext4write mmc ${mmcdev}:${mmcbootpart}" \ |
| " /${splfile} ${spl_imgaddr} ${spl_imgsize};" \ |
| "setenv spl_imgsize;" \ |
| "setenv spl_imgaddr;" \ |
| "setenv spl_addr_tmp;\0" \ |
| ENV_ITB \ |
| "fdtaddr=40800000\0" \ |
| |
| /* Falcon mode definitions */ |
| |
| /* GPT */ |
| |
| /* Download menu - definitions for check keys */ |
| #ifndef __ASSEMBLY__ |
| |
| #define KEY_PWR_PMIC_NAME "MAX8997_PMIC" |
| #define KEY_PWR_STATUS_REG MAX8997_REG_STATUS1 |
| #define KEY_PWR_STATUS_MASK (1 << 0) |
| #define KEY_PWR_INTERRUPT_REG MAX8997_REG_INT1 |
| #define KEY_PWR_INTERRUPT_MASK (1 << 0) |
| |
| #define KEY_VOL_UP_GPIO EXYNOS4_GPIO_X20 |
| #define KEY_VOL_DOWN_GPIO EXYNOS4_GPIO_X21 |
| #endif /* __ASSEMBLY__ */ |
| |
| #endif /* __CONFIG_H */ |