| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Rockchip USB3.0/PCIe Gen2/SATA/SGMII combphy driver |
| * |
| * Copyright (C) 2021 Rockchip Electronics Co., Ltd. |
| */ |
| |
| #include <common.h> |
| #include <clk.h> |
| #include <dm.h> |
| #include <dm/lists.h> |
| #include <dt-bindings/phy/phy.h> |
| #include <generic-phy.h> |
| #include <syscon.h> |
| #include <asm/io.h> |
| #include <asm/arch-rockchip/clock.h> |
| #include <regmap.h> |
| #include <reset-uclass.h> |
| #include <dm/device_compat.h> |
| |
| #define BIT_WRITEABLE_SHIFT 16 |
| |
| struct rockchip_combphy_priv; |
| |
| struct combphy_reg { |
| u16 offset; |
| u16 bitend; |
| u16 bitstart; |
| u16 disable; |
| u16 enable; |
| }; |
| |
| struct rockchip_combphy_grfcfg { |
| struct combphy_reg pcie_mode_set; |
| struct combphy_reg usb_mode_set; |
| struct combphy_reg sgmii_mode_set; |
| struct combphy_reg qsgmii_mode_set; |
| struct combphy_reg pipe_rxterm_set; |
| struct combphy_reg pipe_txelec_set; |
| struct combphy_reg pipe_txcomp_set; |
| struct combphy_reg pipe_clk_25m; |
| struct combphy_reg pipe_clk_100m; |
| struct combphy_reg pipe_phymode_sel; |
| struct combphy_reg pipe_rate_sel; |
| struct combphy_reg pipe_rxterm_sel; |
| struct combphy_reg pipe_txelec_sel; |
| struct combphy_reg pipe_txcomp_sel; |
| struct combphy_reg pipe_clk_ext; |
| struct combphy_reg pipe_sel_usb; |
| struct combphy_reg pipe_sel_qsgmii; |
| struct combphy_reg pipe_phy_status; |
| struct combphy_reg con0_for_pcie; |
| struct combphy_reg con1_for_pcie; |
| struct combphy_reg con2_for_pcie; |
| struct combphy_reg con3_for_pcie; |
| struct combphy_reg con0_for_sata; |
| struct combphy_reg con1_for_sata; |
| struct combphy_reg con2_for_sata; |
| struct combphy_reg con3_for_sata; |
| struct combphy_reg pipe_con0_for_sata; |
| struct combphy_reg pipe_con1_for_sata; |
| struct combphy_reg pipe_sgmii_mac_sel; |
| struct combphy_reg pipe_xpcs_phy_ready; |
| struct combphy_reg u3otg0_port_en; |
| struct combphy_reg u3otg1_port_en; |
| }; |
| |
| struct rockchip_combphy_cfg { |
| const struct rockchip_combphy_grfcfg *grfcfg; |
| int (*combphy_cfg)(struct rockchip_combphy_priv *priv); |
| }; |
| |
| struct rockchip_combphy_priv { |
| u32 mode; |
| void __iomem *mmio; |
| struct udevice *dev; |
| struct regmap *pipe_grf; |
| struct regmap *phy_grf; |
| struct phy *phy; |
| struct reset_ctl_bulk phy_rsts; |
| struct clk ref_clk; |
| const struct rockchip_combphy_cfg *cfg; |
| }; |
| |
| static int param_write(struct regmap *base, |
| const struct combphy_reg *reg, bool en) |
| { |
| u32 val, mask, tmp; |
| |
| tmp = en ? reg->enable : reg->disable; |
| mask = GENMASK(reg->bitend, reg->bitstart); |
| val = (tmp << reg->bitstart) | (mask << BIT_WRITEABLE_SHIFT); |
| |
| return regmap_write(base, reg->offset, val); |
| } |
| |
| static int rockchip_combphy_pcie_init(struct rockchip_combphy_priv *priv) |
| { |
| int ret = 0; |
| |
| if (priv->cfg->combphy_cfg) { |
| ret = priv->cfg->combphy_cfg(priv); |
| if (ret) { |
| dev_err(priv->dev, "failed to init phy for pcie\n"); |
| return ret; |
| } |
| } |
| |
| return ret; |
| } |
| |
| static int rockchip_combphy_usb3_init(struct rockchip_combphy_priv *priv) |
| { |
| int ret = 0; |
| |
| if (priv->cfg->combphy_cfg) { |
| ret = priv->cfg->combphy_cfg(priv); |
| if (ret) { |
| dev_err(priv->dev, "failed to init phy for usb3\n"); |
| return ret; |
| } |
| } |
| |
| return ret; |
| } |
| |
| static int rockchip_combphy_sata_init(struct rockchip_combphy_priv *priv) |
| { |
| int ret = 0; |
| |
| if (priv->cfg->combphy_cfg) { |
| ret = priv->cfg->combphy_cfg(priv); |
| if (ret) { |
| dev_err(priv->dev, "failed to init phy for sata\n"); |
| return ret; |
| } |
| } |
| |
| return ret; |
| } |
| |
| static int rockchip_combphy_sgmii_init(struct rockchip_combphy_priv *priv) |
| { |
| int ret = 0; |
| |
| if (priv->cfg->combphy_cfg) { |
| ret = priv->cfg->combphy_cfg(priv); |
| if (ret) { |
| dev_err(priv->dev, "failed to init phy for sgmii\n"); |
| return ret; |
| } |
| } |
| |
| return ret; |
| } |
| |
| static int rockchip_combphy_set_mode(struct rockchip_combphy_priv *priv) |
| { |
| switch (priv->mode) { |
| case PHY_TYPE_PCIE: |
| rockchip_combphy_pcie_init(priv); |
| break; |
| case PHY_TYPE_USB3: |
| rockchip_combphy_usb3_init(priv); |
| break; |
| case PHY_TYPE_SATA: |
| rockchip_combphy_sata_init(priv); |
| break; |
| case PHY_TYPE_SGMII: |
| case PHY_TYPE_QSGMII: |
| return rockchip_combphy_sgmii_init(priv); |
| default: |
| dev_err(priv->dev, "incompatible PHY type\n"); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int rockchip_combphy_init(struct phy *phy) |
| { |
| struct rockchip_combphy_priv *priv = dev_get_priv(phy->dev); |
| int ret; |
| |
| ret = clk_enable(&priv->ref_clk); |
| if (ret < 0 && ret != -ENOSYS) |
| return ret; |
| |
| ret = rockchip_combphy_set_mode(priv); |
| if (ret) |
| goto err_clk; |
| |
| reset_deassert_bulk(&priv->phy_rsts); |
| |
| return 0; |
| |
| err_clk: |
| clk_disable(&priv->ref_clk); |
| |
| return ret; |
| } |
| |
| static int rockchip_combphy_exit(struct phy *phy) |
| { |
| struct rockchip_combphy_priv *priv = dev_get_priv(phy->dev); |
| |
| clk_disable(&priv->ref_clk); |
| reset_assert_bulk(&priv->phy_rsts); |
| |
| return 0; |
| } |
| |
| static int rockchip_combphy_xlate(struct phy *phy, struct ofnode_phandle_args *args) |
| { |
| struct rockchip_combphy_priv *priv = dev_get_priv(phy->dev); |
| |
| if (args->args_count != 1) { |
| pr_err("invalid number of arguments\n"); |
| return -EINVAL; |
| } |
| |
| priv->mode = args->args[0]; |
| |
| return 0; |
| } |
| |
| static const struct phy_ops rochchip_combphy_ops = { |
| .init = rockchip_combphy_init, |
| .exit = rockchip_combphy_exit, |
| .of_xlate = rockchip_combphy_xlate, |
| }; |
| |
| static int rockchip_combphy_parse_dt(struct udevice *dev, |
| struct rockchip_combphy_priv *priv) |
| { |
| struct udevice *syscon; |
| int ret; |
| |
| ret = uclass_get_device_by_phandle(UCLASS_SYSCON, dev, "rockchip,pipe-grf", &syscon); |
| if (ret) { |
| dev_err(dev, "failed to find peri_ctrl pipe-grf regmap"); |
| return ret; |
| } |
| priv->pipe_grf = syscon_get_regmap(syscon); |
| |
| ret = uclass_get_device_by_phandle(UCLASS_SYSCON, dev, "rockchip,pipe-phy-grf", &syscon); |
| if (ret) { |
| dev_err(dev, "failed to find peri_ctrl pipe-phy-grf regmap\n"); |
| return ret; |
| } |
| priv->phy_grf = syscon_get_regmap(syscon); |
| |
| ret = clk_get_by_index(dev, 0, &priv->ref_clk); |
| if (ret) { |
| dev_err(dev, "failed to find ref clock\n"); |
| return PTR_ERR(&priv->ref_clk); |
| } |
| |
| ret = reset_get_bulk(dev, &priv->phy_rsts); |
| if (ret) { |
| dev_err(dev, "no phy reset control specified\n"); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int rockchip_combphy_probe(struct udevice *udev) |
| { |
| struct rockchip_combphy_priv *priv = dev_get_priv(udev); |
| const struct rockchip_combphy_cfg *phy_cfg; |
| |
| priv->mmio = (void __iomem *)dev_read_addr(udev); |
| if (IS_ERR(priv->mmio)) |
| return PTR_ERR(priv->mmio); |
| |
| phy_cfg = (const struct rockchip_combphy_cfg *)dev_get_driver_data(udev); |
| if (!phy_cfg) { |
| dev_err(udev, "No OF match data provided\n"); |
| return -EINVAL; |
| } |
| |
| priv->dev = udev; |
| priv->mode = PHY_TYPE_SATA; |
| priv->cfg = phy_cfg; |
| |
| return rockchip_combphy_parse_dt(udev, priv); |
| } |
| |
| static int rk3568_combphy_cfg(struct rockchip_combphy_priv *priv) |
| { |
| const struct rockchip_combphy_grfcfg *cfg = priv->cfg->grfcfg; |
| u32 val; |
| |
| switch (priv->mode) { |
| case PHY_TYPE_PCIE: |
| /* Set SSC downward spread spectrum */ |
| val = readl(priv->mmio + (0x1f << 2)); |
| val &= ~GENMASK(5, 4); |
| val |= 0x01 << 4; |
| writel(val, priv->mmio + 0x7c); |
| |
| param_write(priv->phy_grf, &cfg->con0_for_pcie, true); |
| param_write(priv->phy_grf, &cfg->con1_for_pcie, true); |
| param_write(priv->phy_grf, &cfg->con2_for_pcie, true); |
| param_write(priv->phy_grf, &cfg->con3_for_pcie, true); |
| break; |
| case PHY_TYPE_USB3: |
| /* Set SSC downward spread spectrum */ |
| val = readl(priv->mmio + (0x1f << 2)); |
| val &= ~GENMASK(5, 4); |
| val |= 0x01 << 4; |
| writel(val, priv->mmio + 0x7c); |
| |
| /* Enable adaptive CTLE for USB3.0 Rx */ |
| val = readl(priv->mmio + (0x0e << 2)); |
| val &= ~GENMASK(0, 0); |
| val |= 0x01; |
| writel(val, priv->mmio + (0x0e << 2)); |
| |
| /* Set PLL KVCO fine tuning signals */ |
| val = readl(priv->mmio + (0x20 << 2)); |
| val &= ~(0x7 << 2); |
| val |= 0x2 << 2; |
| writel(val, priv->mmio + (0x20 << 2)); |
| |
| /* Set PLL LPF R1 to su_trim[10:7]=1001 */ |
| writel(0x4, priv->mmio + (0xb << 2)); |
| |
| /* Set PLL input clock divider 1/2 */ |
| val = readl(priv->mmio + (0x5 << 2)); |
| val &= ~(0x3 << 6); |
| val |= 0x1 << 6; |
| writel(val, priv->mmio + (0x5 << 2)); |
| |
| /* Set PLL loop divider */ |
| writel(0x32, priv->mmio + (0x11 << 2)); |
| |
| /* Set PLL KVCO to min and set PLL charge pump current to max */ |
| writel(0xf0, priv->mmio + (0xa << 2)); |
| |
| param_write(priv->phy_grf, &cfg->pipe_sel_usb, true); |
| param_write(priv->phy_grf, &cfg->pipe_txcomp_sel, false); |
| param_write(priv->phy_grf, &cfg->pipe_txelec_sel, false); |
| param_write(priv->phy_grf, &cfg->usb_mode_set, true); |
| break; |
| case PHY_TYPE_SATA: |
| writel(0x41, priv->mmio + 0x38); |
| writel(0x8F, priv->mmio + 0x18); |
| param_write(priv->phy_grf, &cfg->con0_for_sata, true); |
| param_write(priv->phy_grf, &cfg->con1_for_sata, true); |
| param_write(priv->phy_grf, &cfg->con2_for_sata, true); |
| param_write(priv->phy_grf, &cfg->con3_for_sata, true); |
| param_write(priv->pipe_grf, &cfg->pipe_con0_for_sata, true); |
| break; |
| case PHY_TYPE_SGMII: |
| param_write(priv->pipe_grf, &cfg->pipe_xpcs_phy_ready, true); |
| param_write(priv->phy_grf, &cfg->pipe_phymode_sel, true); |
| param_write(priv->phy_grf, &cfg->pipe_sel_qsgmii, true); |
| param_write(priv->phy_grf, &cfg->sgmii_mode_set, true); |
| break; |
| case PHY_TYPE_QSGMII: |
| param_write(priv->pipe_grf, &cfg->pipe_xpcs_phy_ready, true); |
| param_write(priv->phy_grf, &cfg->pipe_phymode_sel, true); |
| param_write(priv->phy_grf, &cfg->pipe_rate_sel, true); |
| param_write(priv->phy_grf, &cfg->pipe_sel_qsgmii, true); |
| param_write(priv->phy_grf, &cfg->qsgmii_mode_set, true); |
| break; |
| default: |
| pr_err("%s, phy-type %d\n", __func__, priv->mode); |
| return -EINVAL; |
| } |
| |
| /* The default ref clock is 25Mhz */ |
| param_write(priv->phy_grf, &cfg->pipe_clk_25m, true); |
| |
| if (dev_read_bool(priv->dev, "rockchip,enable-ssc")) { |
| val = readl(priv->mmio + (0x7 << 2)); |
| val |= BIT(4); |
| writel(val, priv->mmio + (0x7 << 2)); |
| } |
| |
| return 0; |
| } |
| |
| static const struct rockchip_combphy_grfcfg rk3568_combphy_grfcfgs = { |
| /* pipe-phy-grf */ |
| .pcie_mode_set = { 0x0000, 5, 0, 0x00, 0x11 }, |
| .usb_mode_set = { 0x0000, 5, 0, 0x00, 0x04 }, |
| .sgmii_mode_set = { 0x0000, 5, 0, 0x00, 0x01 }, |
| .qsgmii_mode_set = { 0x0000, 5, 0, 0x00, 0x21 }, |
| .pipe_rxterm_set = { 0x0000, 12, 12, 0x00, 0x01 }, |
| .pipe_txelec_set = { 0x0004, 1, 1, 0x00, 0x01 }, |
| .pipe_txcomp_set = { 0x0004, 4, 4, 0x00, 0x01 }, |
| .pipe_clk_25m = { 0x0004, 14, 13, 0x00, 0x01 }, |
| .pipe_clk_100m = { 0x0004, 14, 13, 0x00, 0x02 }, |
| .pipe_phymode_sel = { 0x0008, 1, 1, 0x00, 0x01 }, |
| .pipe_rate_sel = { 0x0008, 2, 2, 0x00, 0x01 }, |
| .pipe_rxterm_sel = { 0x0008, 8, 8, 0x00, 0x01 }, |
| .pipe_txelec_sel = { 0x0008, 12, 12, 0x00, 0x01 }, |
| .pipe_txcomp_sel = { 0x0008, 15, 15, 0x00, 0x01 }, |
| .pipe_clk_ext = { 0x000c, 9, 8, 0x02, 0x01 }, |
| .pipe_sel_usb = { 0x000c, 14, 13, 0x00, 0x01 }, |
| .pipe_sel_qsgmii = { 0x000c, 15, 13, 0x00, 0x07 }, |
| .pipe_phy_status = { 0x0034, 6, 6, 0x01, 0x00 }, |
| .con0_for_pcie = { 0x0000, 15, 0, 0x00, 0x1000 }, |
| .con1_for_pcie = { 0x0004, 15, 0, 0x00, 0x0000 }, |
| .con2_for_pcie = { 0x0008, 15, 0, 0x00, 0x0101 }, |
| .con3_for_pcie = { 0x000c, 15, 0, 0x00, 0x0200 }, |
| .con0_for_sata = { 0x0000, 15, 0, 0x00, 0x0119 }, |
| .con1_for_sata = { 0x0004, 15, 0, 0x00, 0x0040 }, |
| .con2_for_sata = { 0x0008, 15, 0, 0x00, 0x80c3 }, |
| .con3_for_sata = { 0x000c, 15, 0, 0x00, 0x4407 }, |
| /* pipe-grf */ |
| .pipe_con0_for_sata = { 0x0000, 15, 0, 0x00, 0x2220 }, |
| .pipe_sgmii_mac_sel = { 0x0040, 1, 1, 0x00, 0x01 }, |
| .pipe_xpcs_phy_ready = { 0x0040, 2, 2, 0x00, 0x01 }, |
| .u3otg0_port_en = { 0x0104, 15, 0, 0x0181, 0x1100 }, |
| .u3otg1_port_en = { 0x0144, 15, 0, 0x0181, 0x1100 }, |
| }; |
| |
| static const struct rockchip_combphy_cfg rk3568_combphy_cfgs = { |
| .grfcfg = &rk3568_combphy_grfcfgs, |
| .combphy_cfg = rk3568_combphy_cfg, |
| }; |
| |
| static int rk3588_combphy_cfg(struct rockchip_combphy_priv *priv) |
| { |
| const struct rockchip_combphy_grfcfg *cfg = priv->cfg->grfcfg; |
| u32 val; |
| |
| switch (priv->mode) { |
| case PHY_TYPE_PCIE: |
| param_write(priv->phy_grf, &cfg->con0_for_pcie, true); |
| param_write(priv->phy_grf, &cfg->con1_for_pcie, true); |
| param_write(priv->phy_grf, &cfg->con2_for_pcie, true); |
| param_write(priv->phy_grf, &cfg->con3_for_pcie, true); |
| break; |
| case PHY_TYPE_USB3: |
| param_write(priv->phy_grf, &cfg->pipe_txcomp_sel, false); |
| param_write(priv->phy_grf, &cfg->pipe_txelec_sel, false); |
| param_write(priv->phy_grf, &cfg->usb_mode_set, true); |
| break; |
| case PHY_TYPE_SATA: |
| param_write(priv->phy_grf, &cfg->con0_for_sata, true); |
| param_write(priv->phy_grf, &cfg->con1_for_sata, true); |
| param_write(priv->phy_grf, &cfg->con2_for_sata, true); |
| param_write(priv->phy_grf, &cfg->con3_for_sata, true); |
| param_write(priv->pipe_grf, &cfg->pipe_con0_for_sata, true); |
| param_write(priv->pipe_grf, &cfg->pipe_con1_for_sata, true); |
| break; |
| case PHY_TYPE_SGMII: |
| case PHY_TYPE_QSGMII: |
| default: |
| dev_err(priv->dev, "incompatible PHY type\n"); |
| return -EINVAL; |
| } |
| |
| /* 100MHz refclock signal is good */ |
| clk_set_rate(&priv->ref_clk, 100000000); |
| param_write(priv->phy_grf, &cfg->pipe_clk_100m, true); |
| if (priv->mode == PHY_TYPE_PCIE) { |
| /* PLL KVCO tuning fine */ |
| val = readl(priv->mmio + (0x20 << 2)); |
| val &= ~GENMASK(4, 2); |
| val |= 0x4 << 2; |
| writel(val, priv->mmio + (0x20 << 2)); |
| |
| /* Set up rx_trim: PLL LPF C1 85pf R1 1.25kohm */ |
| val = 0x4c; |
| writel(val, priv->mmio + (0x1b << 2)); |
| |
| /* Set up su_trim: T3 */ |
| val = 0xb0; |
| writel(val, priv->mmio + (0xa << 2)); |
| val = 0x47; |
| writel(val, priv->mmio + (0xb << 2)); |
| val = 0x57; |
| writel(val, priv->mmio + (0xd << 2)); |
| } |
| |
| return 0; |
| } |
| |
| static const struct rockchip_combphy_grfcfg rk3588_combphy_grfcfgs = { |
| /* pipe-phy-grf */ |
| .pcie_mode_set = { 0x0000, 5, 0, 0x00, 0x11 }, |
| .usb_mode_set = { 0x0000, 5, 0, 0x00, 0x04 }, |
| .pipe_rxterm_set = { 0x0000, 12, 12, 0x00, 0x01 }, |
| .pipe_txelec_set = { 0x0004, 1, 1, 0x00, 0x01 }, |
| .pipe_txcomp_set = { 0x0004, 4, 4, 0x00, 0x01 }, |
| .pipe_clk_25m = { 0x0004, 14, 13, 0x00, 0x01 }, |
| .pipe_clk_100m = { 0x0004, 14, 13, 0x00, 0x02 }, |
| .pipe_rxterm_sel = { 0x0008, 8, 8, 0x00, 0x01 }, |
| .pipe_txelec_sel = { 0x0008, 12, 12, 0x00, 0x01 }, |
| .pipe_txcomp_sel = { 0x0008, 15, 15, 0x00, 0x01 }, |
| .pipe_clk_ext = { 0x000c, 9, 8, 0x02, 0x01 }, |
| .pipe_phy_status = { 0x0034, 6, 6, 0x01, 0x00 }, |
| .con0_for_pcie = { 0x0000, 15, 0, 0x00, 0x1000 }, |
| .con1_for_pcie = { 0x0004, 15, 0, 0x00, 0x0000 }, |
| .con2_for_pcie = { 0x0008, 15, 0, 0x00, 0x0101 }, |
| .con3_for_pcie = { 0x000c, 15, 0, 0x00, 0x0200 }, |
| .con0_for_sata = { 0x0000, 15, 0, 0x00, 0x0129 }, |
| .con1_for_sata = { 0x0004, 15, 0, 0x00, 0x0040 }, |
| .con2_for_sata = { 0x0008, 15, 0, 0x00, 0x80c1 }, |
| .con3_for_sata = { 0x000c, 15, 0, 0x00, 0x0407 }, |
| /* pipe-grf */ |
| .pipe_con0_for_sata = { 0x0000, 11, 5, 0x00, 0x22 }, |
| .pipe_con1_for_sata = { 0x0000, 2, 0, 0x00, 0x2 }, |
| }; |
| |
| static const struct rockchip_combphy_cfg rk3588_combphy_cfgs = { |
| .grfcfg = &rk3588_combphy_grfcfgs, |
| .combphy_cfg = rk3588_combphy_cfg, |
| }; |
| |
| static const struct udevice_id rockchip_combphy_ids[] = { |
| { |
| .compatible = "rockchip,rk3568-naneng-combphy", |
| .data = (ulong)&rk3568_combphy_cfgs |
| }, |
| { |
| .compatible = "rockchip,rk3588-naneng-combphy", |
| .data = (ulong)&rk3588_combphy_cfgs |
| }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(rockchip_naneng_combphy) = { |
| .name = "naneng-combphy", |
| .id = UCLASS_PHY, |
| .of_match = rockchip_combphy_ids, |
| .ops = &rochchip_combphy_ops, |
| .probe = rockchip_combphy_probe, |
| .priv_auto = sizeof(struct rockchip_combphy_priv), |
| }; |