arch/arm/cpu/arm926ejs/armada100/cpu.c

/*
 * (C) Copyright 2010
 * Marvell Semiconductor <www.marvell.com>
 * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
 * Contributor: Mahavir Jain <mjain@marvell.com>
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
 * MA 02110-1301 USA
 */

#include <common.h>
#include <asm/arch/armada100.h>
#include <asm/io.h>

#define UARTCLK14745KHZ	(APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(1))
#define SET_MRVL_ID	(1<<8)
#define L2C_RAM_SEL	(1<<4)

int arch_cpu_init(void)
{
	u32 val;
	struct armd1cpu_registers *cpuregs =
		(struct armd1cpu_registers *) ARMD1_CPU_BASE;

	struct armd1apb1_registers *apb1clkres =
		(struct armd1apb1_registers *) ARMD1_APBC1_BASE;

	struct armd1mpmu_registers *mpmu =
		(struct armd1mpmu_registers *) ARMD1_MPMU_BASE;

	/* set SEL_MRVL_ID bit in ARMADA100_CPU_CONF register */
	val = readl(&cpuregs->cpu_conf);
	val = val | SET_MRVL_ID;
	writel(val, &cpuregs->cpu_conf);

	/* Enable Clocks for all hardware units */
	writel(0xFFFFFFFF, &mpmu->acgr);

	/* Turn on AIB and AIB-APB Functional clock */
	writel(APBC_APBCLK | APBC_FNCLK, &apb1clkres->aib);

	/* ensure L2 cache is not mapped as SRAM */
	val = readl(&cpuregs->cpu_conf);
	val = val & ~(L2C_RAM_SEL);
	writel(val, &cpuregs->cpu_conf);

	/* Enable GPIO clock */
	writel(APBC_APBCLK, &apb1clkres->gpio);

#ifdef CONFIG_I2C_MV
	/* Enable general I2C clock */
	writel(APBC_RST | APBC_FNCLK | APBC_APBCLK, &apb1clkres->twsi0);
	writel(APBC_FNCLK | APBC_APBCLK, &apb1clkres->twsi0);

	/* Enable power I2C clock */
	writel(APBC_RST | APBC_FNCLK | APBC_APBCLK, &apb1clkres->twsi1);
	writel(APBC_FNCLK | APBC_APBCLK, &apb1clkres->twsi1);
#endif

	/*
	 * Enable Functional and APB clock at 14.7456MHz
	 * for configured UART console
	 */
#if (CONFIG_SYS_NS16550_COM1 == ARMD1_UART3_BASE)
	writel(UARTCLK14745KHZ, &apb1clkres->uart3);
#elif (CONFIG_SYS_NS16550_COM1 == ARMD1_UART2_BASE)
	writel(UARTCLK14745KHZ, &apb1clkres->uart2);
#else
	writel(UARTCLK14745KHZ, &apb1clkres->uart1);
#endif
	icache_enable();

	return 0;
}

#if defined(CONFIG_DISPLAY_CPUINFO)
int print_cpuinfo(void)
{
	u32 id;
	struct armd1cpu_registers *cpuregs =
		(struct armd1cpu_registers *) ARMD1_CPU_BASE;

	id = readl(&cpuregs->chip_id);
	printf("SoC:   Armada 88AP%X-%X\n", (id & 0xFFF), (id >> 0x10));
	return 0;
}
#endif

#ifdef CONFIG_I2C_MV
void i2c_clk_enable(void)
{
}
#endif