| CONFIG_ARM=y |
| CONFIG_TARGET_LS1028AQDS=y |
| CONFIG_TFABOOT=y |
| CONFIG_SYS_MALLOC_F_LEN=0x6000 |
| CONFIG_NXP_ESBC=y |
| CONFIG_SYS_FSL_SDHC_CLK_DIV=1 |
| CONFIG_ENV_SIZE=0x2000 |
| CONFIG_NR_DRAM_BANKS=2 |
| CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y |
| CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y |
| CONFIG_AHCI=y |
| CONFIG_DISTRO_DEFAULTS=y |
| CONFIG_FIT_VERBOSE=y |
| CONFIG_OF_BOARD_SETUP=y |
| CONFIG_OF_STDOUT_VIA_ALIAS=y |
| CONFIG_BOOTDELAY=10 |
| CONFIG_USE_BOOTARGS=y |
| CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256 video=1920x1080-32@60 cma=256M" |
| CONFIG_CMD_GREPENV=y |
| CONFIG_CMD_GPT=y |
| CONFIG_CMD_I2C=y |
| CONFIG_CMD_MMC=y |
| CONFIG_CMD_PCI=y |
| CONFIG_CMD_USB=y |
| CONFIG_CMD_WDT=y |
| CONFIG_CMD_CACHE=y |
| CONFIG_OF_CONTROL=y |
| CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1028a-qds" |
| CONFIG_NET_RANDOM_ETHADDR=y |
| CONFIG_NETCONSOLE=y |
| CONFIG_DM=y |
| CONFIG_SCSI_AHCI=y |
| CONFIG_SATA_CEVA=y |
| CONFIG_DM_GPIO=y |
| CONFIG_DM_I2C=y |
| CONFIG_I2C_SET_DEFAULT_BUS_NUM=y |
| CONFIG_I2C_DEFAULT_BUS_NUMBER=0 |
| CONFIG_I2C_MUX=y |
| CONFIG_I2C_MUX_PCA954x=y |
| CONFIG_DM_MMC=y |
| CONFIG_FSL_ESDHC=y |
| CONFIG_DM_SPI_FLASH=y |
| CONFIG_SPI_FLASH_SPANSION=y |
| CONFIG_SPI_FLASH_STMICRO=y |
| # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set |
| CONFIG_PHYLIB=y |
| CONFIG_PHY_AQUANTIA=y |
| CONFIG_PHY_ATHEROS=y |
| CONFIG_PHY_VITESSE=y |
| CONFIG_DM_ETH=y |
| CONFIG_DM_MDIO=y |
| CONFIG_E1000=y |
| CONFIG_FSL_ENETC=y |
| CONFIG_PCI=y |
| CONFIG_DM_PCI=y |
| CONFIG_DM_PCI_COMPAT=y |
| CONFIG_PCIE_ECAM_GENERIC=y |
| CONFIG_PCIE_LAYERSCAPE=y |
| CONFIG_DM_RTC=y |
| CONFIG_RTC_PCF2127=y |
| CONFIG_SCSI=y |
| CONFIG_DM_SCSI=y |
| CONFIG_SYS_NS16550=y |
| CONFIG_SPI=y |
| CONFIG_DM_SPI=y |
| CONFIG_FSL_DSPI=y |
| CONFIG_USB=y |
| CONFIG_DM_USB=y |
| CONFIG_USB_XHCI_HCD=y |
| CONFIG_USB_XHCI_DWC3=y |
| CONFIG_WDT=y |
| CONFIG_WDT_SP805=y |
| CONFIG_RSA=y |
| CONFIG_EFI_LOADER_BOUNCE_BUFFER=y |