| /* |
| * Copyright (c) 2014 Rene Griessl <rgriessl@cit-ec.uni-bielefeld.de> |
| * based on the U-Boot Asix driver as well as information |
| * from the Linux AX88179_178a driver |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <usb.h> |
| #include <net.h> |
| #include <linux/mii.h> |
| #include "usb_ether.h" |
| #include <malloc.h> |
| #include <memalign.h> |
| #include <errno.h> |
| |
| /* ASIX AX88179 based USB 3.0 Ethernet Devices */ |
| #define AX88179_PHY_ID 0x03 |
| #define AX_EEPROM_LEN 0x100 |
| #define AX88179_EEPROM_MAGIC 0x17900b95 |
| #define AX_MCAST_FLTSIZE 8 |
| #define AX_MAX_MCAST 64 |
| #define AX_INT_PPLS_LINK (1 << 16) |
| #define AX_RXHDR_L4_TYPE_MASK 0x1c |
| #define AX_RXHDR_L4_TYPE_UDP 4 |
| #define AX_RXHDR_L4_TYPE_TCP 16 |
| #define AX_RXHDR_L3CSUM_ERR 2 |
| #define AX_RXHDR_L4CSUM_ERR 1 |
| #define AX_RXHDR_CRC_ERR (1 << 29) |
| #define AX_RXHDR_DROP_ERR (1 << 31) |
| #define AX_ENDPOINT_INT 0x01 |
| #define AX_ENDPOINT_IN 0x02 |
| #define AX_ENDPOINT_OUT 0x03 |
| #define AX_ACCESS_MAC 0x01 |
| #define AX_ACCESS_PHY 0x02 |
| #define AX_ACCESS_EEPROM 0x04 |
| #define AX_ACCESS_EFUS 0x05 |
| #define AX_PAUSE_WATERLVL_HIGH 0x54 |
| #define AX_PAUSE_WATERLVL_LOW 0x55 |
| |
| #define PHYSICAL_LINK_STATUS 0x02 |
| #define AX_USB_SS (1 << 2) |
| #define AX_USB_HS (1 << 1) |
| |
| #define GENERAL_STATUS 0x03 |
| #define AX_SECLD (1 << 2) |
| |
| #define AX_SROM_ADDR 0x07 |
| #define AX_SROM_CMD 0x0a |
| #define EEP_RD (1 << 2) |
| #define EEP_BUSY (1 << 4) |
| |
| #define AX_SROM_DATA_LOW 0x08 |
| #define AX_SROM_DATA_HIGH 0x09 |
| |
| #define AX_RX_CTL 0x0b |
| #define AX_RX_CTL_DROPCRCERR (1 << 8) |
| #define AX_RX_CTL_IPE (1 << 9) |
| #define AX_RX_CTL_START (1 << 7) |
| #define AX_RX_CTL_AP (1 << 5) |
| #define AX_RX_CTL_AM (1 << 4) |
| #define AX_RX_CTL_AB (1 << 3) |
| #define AX_RX_CTL_AMALL (1 << 1) |
| #define AX_RX_CTL_PRO (1 << 0) |
| #define AX_RX_CTL_STOP 0 |
| |
| #define AX_NODE_ID 0x10 |
| #define AX_MULFLTARY 0x16 |
| |
| #define AX_MEDIUM_STATUS_MODE 0x22 |
| #define AX_MEDIUM_GIGAMODE (1 << 0) |
| #define AX_MEDIUM_FULL_DUPLEX (1 << 1) |
| #define AX_MEDIUM_EN_125MHZ (1 << 3) |
| #define AX_MEDIUM_RXFLOW_CTRLEN (1 << 4) |
| #define AX_MEDIUM_TXFLOW_CTRLEN (1 << 5) |
| #define AX_MEDIUM_RECEIVE_EN (1 << 8) |
| #define AX_MEDIUM_PS (1 << 9) |
| #define AX_MEDIUM_JUMBO_EN 0x8040 |
| |
| #define AX_MONITOR_MOD 0x24 |
| #define AX_MONITOR_MODE_RWLC (1 << 1) |
| #define AX_MONITOR_MODE_RWMP (1 << 2) |
| #define AX_MONITOR_MODE_PMEPOL (1 << 5) |
| #define AX_MONITOR_MODE_PMETYPE (1 << 6) |
| |
| #define AX_GPIO_CTRL 0x25 |
| #define AX_GPIO_CTRL_GPIO3EN (1 << 7) |
| #define AX_GPIO_CTRL_GPIO2EN (1 << 6) |
| #define AX_GPIO_CTRL_GPIO1EN (1 << 5) |
| |
| #define AX_PHYPWR_RSTCTL 0x26 |
| #define AX_PHYPWR_RSTCTL_BZ (1 << 4) |
| #define AX_PHYPWR_RSTCTL_IPRL (1 << 5) |
| #define AX_PHYPWR_RSTCTL_AT (1 << 12) |
| |
| #define AX_RX_BULKIN_QCTRL 0x2e |
| #define AX_CLK_SELECT 0x33 |
| #define AX_CLK_SELECT_BCS (1 << 0) |
| #define AX_CLK_SELECT_ACS (1 << 1) |
| #define AX_CLK_SELECT_ULR (1 << 3) |
| |
| #define AX_RXCOE_CTL 0x34 |
| #define AX_RXCOE_IP (1 << 0) |
| #define AX_RXCOE_TCP (1 << 1) |
| #define AX_RXCOE_UDP (1 << 2) |
| #define AX_RXCOE_TCPV6 (1 << 5) |
| #define AX_RXCOE_UDPV6 (1 << 6) |
| |
| #define AX_TXCOE_CTL 0x35 |
| #define AX_TXCOE_IP (1 << 0) |
| #define AX_TXCOE_TCP (1 << 1) |
| #define AX_TXCOE_UDP (1 << 2) |
| #define AX_TXCOE_TCPV6 (1 << 5) |
| #define AX_TXCOE_UDPV6 (1 << 6) |
| |
| #define AX_LEDCTRL 0x73 |
| |
| #define GMII_PHY_PHYSR 0x11 |
| #define GMII_PHY_PHYSR_SMASK 0xc000 |
| #define GMII_PHY_PHYSR_GIGA (1 << 15) |
| #define GMII_PHY_PHYSR_100 (1 << 14) |
| #define GMII_PHY_PHYSR_FULL (1 << 13) |
| #define GMII_PHY_PHYSR_LINK (1 << 10) |
| |
| #define GMII_LED_ACT 0x1a |
| #define GMII_LED_ACTIVE_MASK 0xff8f |
| #define GMII_LED0_ACTIVE (1 << 4) |
| #define GMII_LED1_ACTIVE (1 << 5) |
| #define GMII_LED2_ACTIVE (1 << 6) |
| |
| #define GMII_LED_LINK 0x1c |
| #define GMII_LED_LINK_MASK 0xf888 |
| #define GMII_LED0_LINK_10 (1 << 0) |
| #define GMII_LED0_LINK_100 (1 << 1) |
| #define GMII_LED0_LINK_1000 (1 << 2) |
| #define GMII_LED1_LINK_10 (1 << 4) |
| #define GMII_LED1_LINK_100 (1 << 5) |
| #define GMII_LED1_LINK_1000 (1 << 6) |
| #define GMII_LED2_LINK_10 (1 << 8) |
| #define GMII_LED2_LINK_100 (1 << 9) |
| #define GMII_LED2_LINK_1000 (1 << 10) |
| #define LED0_ACTIVE (1 << 0) |
| #define LED0_LINK_10 (1 << 1) |
| #define LED0_LINK_100 (1 << 2) |
| #define LED0_LINK_1000 (1 << 3) |
| #define LED0_FD (1 << 4) |
| #define LED0_USB3_MASK 0x001f |
| #define LED1_ACTIVE (1 << 5) |
| #define LED1_LINK_10 (1 << 6) |
| #define LED1_LINK_100 (1 << 7) |
| #define LED1_LINK_1000 (1 << 8) |
| #define LED1_FD (1 << 9) |
| #define LED1_USB3_MASK 0x03e0 |
| #define LED2_ACTIVE (1 << 10) |
| #define LED2_LINK_1000 (1 << 13) |
| #define LED2_LINK_100 (1 << 12) |
| #define LED2_LINK_10 (1 << 11) |
| #define LED2_FD (1 << 14) |
| #define LED_VALID (1 << 15) |
| #define LED2_USB3_MASK 0x7c00 |
| |
| #define GMII_PHYPAGE 0x1e |
| #define GMII_PHY_PAGE_SELECT 0x1f |
| #define GMII_PHY_PGSEL_EXT 0x0007 |
| #define GMII_PHY_PGSEL_PAGE0 0x0000 |
| |
| /* local defines */ |
| #define ASIX_BASE_NAME "axg" |
| #define USB_CTRL_SET_TIMEOUT 5000 |
| #define USB_CTRL_GET_TIMEOUT 5000 |
| #define USB_BULK_SEND_TIMEOUT 5000 |
| #define USB_BULK_RECV_TIMEOUT 5000 |
| |
| #define AX_RX_URB_SIZE 1024 * 0x12 |
| #define BLK_FRAME_SIZE 0x200 |
| #define PHY_CONNECT_TIMEOUT 5000 |
| |
| #define TIMEOUT_RESOLUTION 50 /* ms */ |
| |
| #define FLAG_NONE 0 |
| #define FLAG_TYPE_AX88179 (1U << 0) |
| #define FLAG_TYPE_AX88178a (1U << 1) |
| #define FLAG_TYPE_DLINK_DUB1312 (1U << 2) |
| #define FLAG_TYPE_SITECOM (1U << 3) |
| #define FLAG_TYPE_SAMSUNG (1U << 4) |
| #define FLAG_TYPE_LENOVO (1U << 5) |
| #define FLAG_TYPE_GX3 (1U << 6) |
| |
| /* local vars */ |
| static const struct { |
| unsigned char ctrl, timer_l, timer_h, size, ifg; |
| } AX88179_BULKIN_SIZE[] = { |
| {7, 0x4f, 0, 0x02, 0xff}, |
| {7, 0x20, 3, 0x03, 0xff}, |
| {7, 0xae, 7, 0x04, 0xff}, |
| {7, 0xcc, 0x4c, 0x04, 8}, |
| }; |
| |
| static int curr_eth_dev; /* index for name of next device detected */ |
| |
| /* driver private */ |
| struct asix_private { |
| int flags; |
| int rx_urb_size; |
| int maxpacketsize; |
| }; |
| |
| /* |
| * Asix infrastructure commands |
| */ |
| static int asix_write_cmd(struct ueth_data *dev, u8 cmd, u16 value, u16 index, |
| u16 size, void *data) |
| { |
| int len; |
| ALLOC_CACHE_ALIGN_BUFFER(unsigned char, buf, size); |
| |
| debug("asix_write_cmd() cmd=0x%02x value=0x%04x index=0x%04x size=%d\n", |
| cmd, value, index, size); |
| |
| memcpy(buf, data, size); |
| |
| len = usb_control_msg( |
| dev->pusb_dev, |
| usb_sndctrlpipe(dev->pusb_dev, 0), |
| cmd, |
| USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, |
| value, |
| index, |
| buf, |
| size, |
| USB_CTRL_SET_TIMEOUT); |
| |
| return len == size ? 0 : ECOMM; |
| } |
| |
| static int asix_read_cmd(struct ueth_data *dev, u8 cmd, u16 value, u16 index, |
| u16 size, void *data) |
| { |
| int len; |
| ALLOC_CACHE_ALIGN_BUFFER(unsigned char, buf, size); |
| |
| debug("asix_read_cmd() cmd=0x%02x value=0x%04x index=0x%04x size=%d\n", |
| cmd, value, index, size); |
| |
| len = usb_control_msg( |
| dev->pusb_dev, |
| usb_rcvctrlpipe(dev->pusb_dev, 0), |
| cmd, |
| USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, |
| value, |
| index, |
| buf, |
| size, |
| USB_CTRL_GET_TIMEOUT); |
| |
| memcpy(data, buf, size); |
| |
| return len == size ? 0 : ECOMM; |
| } |
| |
| static int asix_read_mac(struct eth_device *eth) |
| { |
| struct ueth_data *dev = (struct ueth_data *)eth->priv; |
| u8 buf[ETH_ALEN]; |
| |
| asix_read_cmd(dev, AX_ACCESS_MAC, AX_NODE_ID, 6, 6, buf); |
| debug("asix_read_mac() returning %02x:%02x:%02x:%02x:%02x:%02x\n", |
| buf[0], buf[1], buf[2], buf[3], buf[4], buf[5]); |
| |
| memcpy(eth->enetaddr, buf, ETH_ALEN); |
| |
| return 0; |
| } |
| |
| static int asix_write_mac(struct eth_device *eth) |
| { |
| struct ueth_data *dev = (struct ueth_data *)eth->priv; |
| int ret; |
| |
| ret = asix_write_cmd(dev, AX_ACCESS_MAC, AX_NODE_ID, ETH_ALEN, |
| ETH_ALEN, eth->enetaddr); |
| if (ret < 0) |
| debug("Failed to set MAC address: %02x\n", ret); |
| |
| return ret; |
| } |
| |
| static int asix_basic_reset(struct ueth_data *dev) |
| { |
| struct asix_private *dev_priv = (struct asix_private *)dev->dev_priv; |
| u8 buf[5]; |
| u16 *tmp16; |
| u8 *tmp; |
| |
| tmp16 = (u16 *)buf; |
| tmp = (u8 *)buf; |
| |
| /* Power up ethernet PHY */ |
| *tmp16 = 0; |
| asix_write_cmd(dev, AX_ACCESS_MAC, AX_PHYPWR_RSTCTL, 2, 2, tmp16); |
| |
| *tmp16 = AX_PHYPWR_RSTCTL_IPRL; |
| asix_write_cmd(dev, AX_ACCESS_MAC, AX_PHYPWR_RSTCTL, 2, 2, tmp16); |
| mdelay(200); |
| |
| *tmp = AX_CLK_SELECT_ACS | AX_CLK_SELECT_BCS; |
| asix_write_cmd(dev, AX_ACCESS_MAC, AX_CLK_SELECT, 1, 1, tmp); |
| mdelay(200); |
| |
| /* RX bulk configuration */ |
| memcpy(tmp, &AX88179_BULKIN_SIZE[0], 5); |
| asix_write_cmd(dev, AX_ACCESS_MAC, AX_RX_BULKIN_QCTRL, 5, 5, tmp); |
| |
| dev_priv->rx_urb_size = 128 * 20; |
| |
| /* Water Level configuration */ |
| *tmp = 0x34; |
| asix_write_cmd(dev, AX_ACCESS_MAC, AX_PAUSE_WATERLVL_LOW, 1, 1, tmp); |
| |
| *tmp = 0x52; |
| asix_write_cmd(dev, AX_ACCESS_MAC, AX_PAUSE_WATERLVL_HIGH, 1, 1, tmp); |
| |
| /* Enable checksum offload */ |
| *tmp = AX_RXCOE_IP | AX_RXCOE_TCP | AX_RXCOE_UDP | |
| AX_RXCOE_TCPV6 | AX_RXCOE_UDPV6; |
| asix_write_cmd(dev, AX_ACCESS_MAC, AX_RXCOE_CTL, 1, 1, tmp); |
| |
| *tmp = AX_TXCOE_IP | AX_TXCOE_TCP | AX_TXCOE_UDP | |
| AX_TXCOE_TCPV6 | AX_TXCOE_UDPV6; |
| asix_write_cmd(dev, AX_ACCESS_MAC, AX_TXCOE_CTL, 1, 1, tmp); |
| |
| /* Configure RX control register => start operation */ |
| *tmp16 = AX_RX_CTL_DROPCRCERR | AX_RX_CTL_IPE | AX_RX_CTL_START | |
| AX_RX_CTL_AP | AX_RX_CTL_AMALL | AX_RX_CTL_AB; |
| asix_write_cmd(dev, AX_ACCESS_MAC, AX_RX_CTL, 2, 2, tmp16); |
| |
| *tmp = AX_MONITOR_MODE_PMETYPE | AX_MONITOR_MODE_PMEPOL | |
| AX_MONITOR_MODE_RWMP; |
| asix_write_cmd(dev, AX_ACCESS_MAC, AX_MONITOR_MOD, 1, 1, tmp); |
| |
| /* Configure default medium type => giga */ |
| *tmp16 = AX_MEDIUM_RECEIVE_EN | AX_MEDIUM_TXFLOW_CTRLEN | |
| AX_MEDIUM_RXFLOW_CTRLEN | AX_MEDIUM_FULL_DUPLEX | |
| AX_MEDIUM_GIGAMODE | AX_MEDIUM_JUMBO_EN; |
| asix_write_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE, 2, 2, tmp16); |
| |
| u16 adv = 0; |
| adv = ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_LPACK | |
| ADVERTISE_NPAGE | ADVERTISE_PAUSE_ASYM | ADVERTISE_PAUSE_CAP; |
| asix_write_cmd(dev, AX_ACCESS_PHY, 0x03, MII_ADVERTISE, 2, &adv); |
| |
| adv = ADVERTISE_1000FULL; |
| asix_write_cmd(dev, AX_ACCESS_PHY, 0x03, MII_CTRL1000, 2, &adv); |
| |
| return 0; |
| } |
| |
| static int asix_wait_link(struct ueth_data *dev) |
| { |
| int timeout = 0; |
| int link_detected; |
| u8 buf[2]; |
| u16 *tmp16; |
| |
| tmp16 = (u16 *)buf; |
| |
| do { |
| asix_read_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID, |
| MII_BMSR, 2, buf); |
| link_detected = *tmp16 & BMSR_LSTATUS; |
| if (!link_detected) { |
| if (timeout == 0) |
| printf("Waiting for Ethernet connection... "); |
| mdelay(TIMEOUT_RESOLUTION); |
| timeout += TIMEOUT_RESOLUTION; |
| } |
| } while (!link_detected && timeout < PHY_CONNECT_TIMEOUT); |
| |
| if (link_detected) { |
| if (timeout > 0) |
| printf("done.\n"); |
| return 0; |
| } else { |
| printf("unable to connect.\n"); |
| return -ENETUNREACH; |
| } |
| } |
| |
| /* |
| * Asix callbacks |
| */ |
| static int asix_init(struct eth_device *eth, bd_t *bd) |
| { |
| struct ueth_data *dev = (struct ueth_data *)eth->priv; |
| struct asix_private *dev_priv = (struct asix_private *)dev->dev_priv; |
| u8 buf[2], tmp[5], link_sts; |
| u16 *tmp16, mode; |
| |
| |
| tmp16 = (u16 *)buf; |
| |
| debug("** %s()\n", __func__); |
| |
| /* Configure RX control register => start operation */ |
| *tmp16 = AX_RX_CTL_DROPCRCERR | AX_RX_CTL_IPE | AX_RX_CTL_START | |
| AX_RX_CTL_AP | AX_RX_CTL_AMALL | AX_RX_CTL_AB; |
| if (asix_write_cmd(dev, AX_ACCESS_MAC, AX_RX_CTL, 2, 2, tmp16) != 0) |
| goto out_err; |
| |
| if (asix_wait_link(dev) != 0) { |
| /*reset device and try again*/ |
| printf("Reset Ethernet Device\n"); |
| asix_basic_reset(dev); |
| if (asix_wait_link(dev) != 0) |
| goto out_err; |
| } |
| |
| /* Configure link */ |
| mode = AX_MEDIUM_RECEIVE_EN | AX_MEDIUM_TXFLOW_CTRLEN | |
| AX_MEDIUM_RXFLOW_CTRLEN; |
| |
| asix_read_cmd(dev, AX_ACCESS_MAC, PHYSICAL_LINK_STATUS, |
| 1, 1, &link_sts); |
| |
| asix_read_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID, |
| GMII_PHY_PHYSR, 2, tmp16); |
| |
| if (!(*tmp16 & GMII_PHY_PHYSR_LINK)) { |
| return 0; |
| } else if (GMII_PHY_PHYSR_GIGA == (*tmp16 & GMII_PHY_PHYSR_SMASK)) { |
| mode |= AX_MEDIUM_GIGAMODE | AX_MEDIUM_EN_125MHZ | |
| AX_MEDIUM_JUMBO_EN; |
| |
| if (link_sts & AX_USB_SS) |
| memcpy(tmp, &AX88179_BULKIN_SIZE[0], 5); |
| else if (link_sts & AX_USB_HS) |
| memcpy(tmp, &AX88179_BULKIN_SIZE[1], 5); |
| else |
| memcpy(tmp, &AX88179_BULKIN_SIZE[3], 5); |
| } else if (GMII_PHY_PHYSR_100 == (*tmp16 & GMII_PHY_PHYSR_SMASK)) { |
| mode |= AX_MEDIUM_PS; |
| |
| if (link_sts & (AX_USB_SS | AX_USB_HS)) |
| memcpy(tmp, &AX88179_BULKIN_SIZE[2], 5); |
| else |
| memcpy(tmp, &AX88179_BULKIN_SIZE[3], 5); |
| } else { |
| memcpy(tmp, &AX88179_BULKIN_SIZE[3], 5); |
| } |
| |
| /* RX bulk configuration */ |
| asix_write_cmd(dev, AX_ACCESS_MAC, AX_RX_BULKIN_QCTRL, 5, 5, tmp); |
| |
| dev_priv->rx_urb_size = (1024 * (tmp[3] + 2)); |
| if (*tmp16 & GMII_PHY_PHYSR_FULL) |
| mode |= AX_MEDIUM_FULL_DUPLEX; |
| asix_write_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE, |
| 2, 2, &mode); |
| |
| return 0; |
| out_err: |
| return -1; |
| } |
| |
| static int asix_send(struct eth_device *eth, void *packet, int length) |
| { |
| struct ueth_data *dev = (struct ueth_data *)eth->priv; |
| struct asix_private *dev_priv = (struct asix_private *)dev->dev_priv; |
| |
| int err; |
| u32 packet_len, tx_hdr2; |
| int actual_len, framesize; |
| ALLOC_CACHE_ALIGN_BUFFER(unsigned char, msg, |
| PKTSIZE + (2 * sizeof(packet_len))); |
| |
| debug("** %s(), len %d\n", __func__, length); |
| |
| packet_len = length; |
| cpu_to_le32s(&packet_len); |
| |
| memcpy(msg, &packet_len, sizeof(packet_len)); |
| framesize = dev_priv->maxpacketsize; |
| tx_hdr2 = 0; |
| if (((length + 8) % framesize) == 0) |
| tx_hdr2 |= 0x80008000; /* Enable padding */ |
| |
| cpu_to_le32s(&tx_hdr2); |
| |
| memcpy(msg + sizeof(packet_len), &tx_hdr2, sizeof(tx_hdr2)); |
| |
| memcpy(msg + sizeof(packet_len) + sizeof(tx_hdr2), |
| (void *)packet, length); |
| |
| err = usb_bulk_msg(dev->pusb_dev, |
| usb_sndbulkpipe(dev->pusb_dev, dev->ep_out), |
| (void *)msg, |
| length + sizeof(packet_len) + sizeof(tx_hdr2), |
| &actual_len, |
| USB_BULK_SEND_TIMEOUT); |
| debug("Tx: len = %zu, actual = %u, err = %d\n", |
| length + sizeof(packet_len), actual_len, err); |
| |
| return err; |
| } |
| |
| static int asix_recv(struct eth_device *eth) |
| { |
| struct ueth_data *dev = (struct ueth_data *)eth->priv; |
| struct asix_private *dev_priv = (struct asix_private *)dev->dev_priv; |
| |
| u16 frame_pos; |
| int err; |
| int actual_len; |
| |
| int pkt_cnt; |
| u32 rx_hdr; |
| u16 hdr_off; |
| u32 *pkt_hdr; |
| ALLOC_CACHE_ALIGN_BUFFER(u8, recv_buf, dev_priv->rx_urb_size); |
| |
| actual_len = -1; |
| |
| debug("** %s()\n", __func__); |
| |
| err = usb_bulk_msg(dev->pusb_dev, |
| usb_rcvbulkpipe(dev->pusb_dev, dev->ep_in), |
| (void *)recv_buf, |
| dev_priv->rx_urb_size, |
| &actual_len, |
| USB_BULK_RECV_TIMEOUT); |
| debug("Rx: len = %u, actual = %u, err = %d\n", dev_priv->rx_urb_size, |
| actual_len, err); |
| |
| if (err != 0) { |
| debug("Rx: failed to receive\n"); |
| return -ECOMM; |
| } |
| if (actual_len > dev_priv->rx_urb_size) { |
| debug("Rx: received too many bytes %d\n", actual_len); |
| return -EMSGSIZE; |
| } |
| |
| |
| rx_hdr = *(u32 *)(recv_buf + actual_len - 4); |
| le32_to_cpus(&pkt_hdr); |
| |
| pkt_cnt = (u16)rx_hdr; |
| hdr_off = (u16)(rx_hdr >> 16); |
| pkt_hdr = (u32 *)(recv_buf + hdr_off); |
| |
| |
| frame_pos = 0; |
| |
| while (pkt_cnt--) { |
| u16 pkt_len; |
| |
| le32_to_cpus(pkt_hdr); |
| pkt_len = (*pkt_hdr >> 16) & 0x1fff; |
| |
| frame_pos += 2; |
| |
| net_process_received_packet(recv_buf + frame_pos, pkt_len); |
| |
| pkt_hdr++; |
| frame_pos += ((pkt_len + 7) & 0xFFF8)-2; |
| |
| if (pkt_cnt == 0) |
| return 0; |
| } |
| return err; |
| } |
| |
| static void asix_halt(struct eth_device *eth) |
| { |
| debug("** %s()\n", __func__); |
| } |
| |
| /* |
| * Asix probing functions |
| */ |
| void ax88179_eth_before_probe(void) |
| { |
| curr_eth_dev = 0; |
| } |
| |
| struct asix_dongle { |
| unsigned short vendor; |
| unsigned short product; |
| int flags; |
| }; |
| |
| static const struct asix_dongle asix_dongles[] = { |
| { 0x0b95, 0x1790, FLAG_TYPE_AX88179 }, |
| { 0x0b95, 0x178a, FLAG_TYPE_AX88178a }, |
| { 0x2001, 0x4a00, FLAG_TYPE_DLINK_DUB1312 }, |
| { 0x0df6, 0x0072, FLAG_TYPE_SITECOM }, |
| { 0x04e8, 0xa100, FLAG_TYPE_SAMSUNG }, |
| { 0x17ef, 0x304b, FLAG_TYPE_LENOVO }, |
| { 0x04b4, 0x3610, FLAG_TYPE_GX3 }, |
| { 0x0000, 0x0000, FLAG_NONE } /* END - Do not remove */ |
| }; |
| |
| /* Probe to see if a new device is actually an asix device */ |
| int ax88179_eth_probe(struct usb_device *dev, unsigned int ifnum, |
| struct ueth_data *ss) |
| { |
| struct usb_interface *iface; |
| struct usb_interface_descriptor *iface_desc; |
| struct asix_private *dev_priv; |
| int ep_in_found = 0, ep_out_found = 0; |
| int i; |
| |
| /* let's examine the device now */ |
| iface = &dev->config.if_desc[ifnum]; |
| iface_desc = &dev->config.if_desc[ifnum].desc; |
| |
| for (i = 0; asix_dongles[i].vendor != 0; i++) { |
| if (dev->descriptor.idVendor == asix_dongles[i].vendor && |
| dev->descriptor.idProduct == asix_dongles[i].product) |
| /* Found a supported dongle */ |
| break; |
| } |
| |
| if (asix_dongles[i].vendor == 0) |
| return 0; |
| |
| memset(ss, 0, sizeof(struct ueth_data)); |
| |
| /* At this point, we know we've got a live one */ |
| debug("\n\nUSB Ethernet device detected: %#04x:%#04x\n", |
| dev->descriptor.idVendor, dev->descriptor.idProduct); |
| |
| /* Initialize the ueth_data structure with some useful info */ |
| ss->ifnum = ifnum; |
| ss->pusb_dev = dev; |
| ss->subclass = iface_desc->bInterfaceSubClass; |
| ss->protocol = iface_desc->bInterfaceProtocol; |
| |
| /* alloc driver private */ |
| ss->dev_priv = calloc(1, sizeof(struct asix_private)); |
| if (!ss->dev_priv) |
| return 0; |
| dev_priv = ss->dev_priv; |
| dev_priv->flags = asix_dongles[i].flags; |
| |
| /* |
| * We are expecting a minimum of 3 endpoints - in, out (bulk), and |
| * int. We will ignore any others. |
| */ |
| for (i = 0; i < iface_desc->bNumEndpoints; i++) { |
| /* is it an interrupt endpoint? */ |
| if ((iface->ep_desc[i].bmAttributes & |
| USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT) { |
| ss->ep_int = iface->ep_desc[i].bEndpointAddress & |
| USB_ENDPOINT_NUMBER_MASK; |
| ss->irqinterval = iface->ep_desc[i].bInterval; |
| continue; |
| } |
| |
| /* is it an BULK endpoint? */ |
| if (!((iface->ep_desc[i].bmAttributes & |
| USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_BULK)) |
| continue; |
| |
| u8 ep_addr = iface->ep_desc[i].bEndpointAddress; |
| if ((ep_addr & USB_DIR_IN) && !ep_in_found) { |
| ss->ep_in = ep_addr & |
| USB_ENDPOINT_NUMBER_MASK; |
| ep_in_found = 1; |
| } |
| if (!(ep_addr & USB_DIR_IN) && !ep_out_found) { |
| ss->ep_out = ep_addr & |
| USB_ENDPOINT_NUMBER_MASK; |
| dev_priv->maxpacketsize = |
| dev->epmaxpacketout[AX_ENDPOINT_OUT]; |
| ep_out_found = 1; |
| } |
| } |
| debug("Endpoints In %d Out %d Int %d\n", |
| ss->ep_in, ss->ep_out, ss->ep_int); |
| |
| /* Do some basic sanity checks, and bail if we find a problem */ |
| if (usb_set_interface(dev, iface_desc->bInterfaceNumber, 0) || |
| !ss->ep_in || !ss->ep_out || !ss->ep_int) { |
| debug("Problems with device\n"); |
| return 0; |
| } |
| dev->privptr = (void *)ss; |
| return 1; |
| } |
| |
| int ax88179_eth_get_info(struct usb_device *dev, struct ueth_data *ss, |
| struct eth_device *eth) |
| { |
| if (!eth) { |
| debug("%s: missing parameter.\n", __func__); |
| return 0; |
| } |
| sprintf(eth->name, "%s%d", ASIX_BASE_NAME, curr_eth_dev++); |
| eth->init = asix_init; |
| eth->send = asix_send; |
| eth->recv = asix_recv; |
| eth->halt = asix_halt; |
| eth->write_hwaddr = asix_write_mac; |
| eth->priv = ss; |
| |
| if (asix_basic_reset(ss)) |
| return 0; |
| |
| /* Get the MAC address */ |
| if (asix_read_mac(eth)) |
| return 0; |
| debug("MAC %pM\n", eth->enetaddr); |
| |
| return 1; |
| } |