| /* |
| * Copyright (C) 2015 Stefan Roese <sr@denx.de> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| #ifndef __CONFIG_SOCFPGA_SR1500_H__ |
| #define __CONFIG_SOCFPGA_SR1500_H__ |
| |
| #include <asm/arch/base_addr_ac5.h> |
| |
| #define CONFIG_HW_WATCHDOG |
| |
| /* Memory configurations */ |
| #define PHYS_SDRAM_1_SIZE 0x40000000 /* 1GiB on SR1500 */ |
| |
| /* Booting Linux */ |
| #define CONFIG_LOADADDR 0x01000000 |
| #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR |
| |
| /* Ethernet on SoC (EMAC) */ |
| #define CONFIG_PHY_INTERFACE_MODE PHY_INTERFACE_MODE_RGMII |
| /* The PHY is autodetected, so no MII PHY address is needed here */ |
| #define CONFIG_PHY_MARVELL |
| #define PHY_ANEG_TIMEOUT 8000 |
| |
| /* Environment */ |
| |
| /* Enable SPI NOR flash reset, needed for SPI booting */ |
| #define CONFIG_SPI_N25Q256A_RESET |
| |
| /* |
| * Bootcounter |
| */ |
| /* last 2 lwords in OCRAM */ |
| #define CONFIG_SYS_BOOTCOUNT_ADDR 0xfffffff8 |
| #define CONFIG_SYS_BOOTCOUNT_BE |
| |
| /* Environment setting for SPI flash */ |
| #define CONFIG_SYS_REDUNDAND_ENVIRONMENT |
| #define CONFIG_ENV_SECT_SIZE (64 * 1024) |
| #define CONFIG_ENV_SIZE (16 * 1024) |
| #define CONFIG_ENV_OFFSET 0x000e0000 |
| #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SECT_SIZE) |
| #define CONFIG_ENV_SPI_BUS 0 |
| #define CONFIG_ENV_SPI_CS 0 |
| #define CONFIG_ENV_SPI_MODE SPI_MODE_3 |
| #define CONFIG_ENV_SPI_MAX_HZ 100000000 /* Use max of 100MHz */ |
| #define CONFIG_SF_DEFAULT_SPEED 100000000 |
| |
| /* |
| * The QSPI NOR flash layout on SR1500: |
| * |
| * 0000.0000 - 0003.ffff: SPL (4 times) |
| * 0004.0000 - 000d.ffff: U-Boot |
| * 000e.0000 - 000e.ffff: env1 |
| * 000f.0000 - 000f.ffff: env2 |
| */ |
| |
| /* The rest of the configuration is shared */ |
| #include <configs/socfpga_common.h> |
| |
| #endif /* __CONFIG_SOCFPGA_SR1500_H__ */ |