blob: bc5a564679516efa94bf08167611ad57af4e5f21 [file] [log] [blame]
/*
* Copyright (C) 2016 Freescale Semiconductor, Inc.
*
* Configuration settings for the Freescale i.MX7ULP EVK board.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __MX7ULP_EVK_CONFIG_H
#define __MX7ULP_EVK_CONFIG_H
#include <linux/sizes.h>
#include <asm/arch/imx-regs.h>
/*Uncomment it to use secure boot*/
/*#define CONFIG_SECURE_BOOT*/
#ifdef CONFIG_SECURE_BOOT
#ifndef CONFIG_CSF_SIZE
#define CONFIG_CSF_SIZE 0x4000
#endif
#endif
#define CONFIG_BOARD_POSTCLK_INIT
#define CONFIG_SYS_BOOTM_LEN 0x1000000
#define SRC_BASE_ADDR CMC1_RBASE
#define IRAM_BASE_ADDR OCRAM_0_BASE
#define IOMUXC_BASE_ADDR IOMUXC1_RBASE
#define CONFIG_BOUNCE_BUFFER
#define CONFIG_FSL_ESDHC
#define CONFIG_FSL_USDHC
#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
#define CONFIG_SYS_FSL_USDHC_NUM 1
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
#define CONFIG_SYS_MMC_ENV_DEV 0 /* USDHC1 */
#define CONFIG_SYS_MMC_ENV_PART 0 /* user area */
#define CONFIG_MMCROOT "/dev/mmcblk0p2" /* USDHC1 */
#define CONFIG_SYS_MMC_IMG_LOAD_PART 1
#define CONFIG_ENV_OFFSET (12 * SZ_64K)
#define CONFIG_ENV_SIZE SZ_8K
/* Using ULP WDOG for reset */
#define WDOG_BASE_ADDR WDG1_RBASE
#define CONFIG_SYS_ARCH_TIMER
#define CONFIG_SYS_HZ_CLOCK 1000000 /* Fixed at 1Mhz from TSTMR */
#define CONFIG_INITRD_TAG
#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
/*#define CONFIG_REVISION_TAG*/
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (8 * SZ_1M)
#define CONFIG_BOARD_EARLY_INIT_F
/* UART */
#define LPUART_BASE LPUART4_RBASE
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_LONGHELP
#define CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_CACHELINE_SIZE 64
/* Miscellaneous configurable options */
#define CONFIG_SYS_PROMPT "=> "
#define CONFIG_SYS_CBSIZE 512
#define CONFIG_SYS_MAXARGS 256
#define CONFIG_CMDLINE_EDITING
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM 0x60000000
#define PHYS_SDRAM_SIZE SZ_1G
#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
#define CONFIG_LOADADDR 0x60800000
#define CONFIG_CMD_MEMTEST
#define CONFIG_SYS_MEMTEST_END 0x9E000000
#define CONFIG_EXTRA_ENV_SETTINGS \
"script=boot.scr\0" \
"image=zImage\0" \
"console=ttyLP0\0" \
"fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
"fdt_file=imx7ulp-evk.dtb\0" \
"fdt_addr=0x63000000\0" \
"boot_fdt=try\0" \
"earlycon=lpuart32,0x402D0010\0" \
"ip_dyn=yes\0" \
"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
"mmcautodetect=yes\0" \
"mmcargs=setenv bootargs console=${console},${baudrate} " \
"root=${mmcroot}\0" \
"loadbootscript=" \
"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
"bootscript=echo Running bootscript from mmc ...; " \
"source\0" \
"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
"mmcboot=echo Booting from mmc ...; " \
"run mmcargs; " \
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
"if run loadfdt; then " \
"bootz ${loadaddr} - ${fdt_addr}; " \
"else " \
"if test ${boot_fdt} = try; then " \
"bootz; " \
"else " \
"echo WARN: Cannot load the DT; " \
"fi; " \
"fi; " \
"else " \
"bootz; " \
"fi;\0" \
"netargs=setenv bootargs console=${console},${baudrate} " \
"root=/dev/nfs " \
"ip=:::::eth0:dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
"netboot=echo Booting from net ...; " \
"run netargs; " \
"if test ${ip_dyn} = yes; then " \
"setenv get_cmd dhcp; " \
"else " \
"setenv get_cmd tftp; " \
"fi; " \
"usb start; "\
"${get_cmd} ${image}; " \
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
"bootz ${loadaddr} - ${fdt_addr}; " \
"else " \
"if test ${boot_fdt} = try; then " \
"bootz; " \
"else " \
"echo WARN: Cannot load the DT; " \
"fi; " \
"fi; " \
"else " \
"bootz; " \
"fi;\0" \
#define CONFIG_BOOTCOMMAND \
"mmc dev ${mmcdev}; if mmc rescan; then " \
"if run loadbootscript; then " \
"run bootscript; " \
"else " \
"if run loadimage; then " \
"run mmcboot; " \
"fi; " \
"fi; " \
"fi"
#define CONFIG_SYS_HZ 1000
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE SZ_256K
#define CONFIG_SYS_INIT_SP_OFFSET \
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
#ifndef CONFIG_SYS_DCACHE_OFF
#define CONFIG_CMD_CACHE
#endif
#endif /* __CONFIG_H */