| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * dts file for Xilinx Versal a2197 RevA System Controller |
| * |
| * (C) Copyright 2019, Xilinx, Inc. |
| * |
| * Michal Simek <michal.simek@xilinx.com> |
| */ |
| /dts-v1/; |
| |
| #include "zynqmp.dtsi" |
| #include "zynqmp-clk-ccf.dtsi" |
| #include <dt-bindings/gpio/gpio.h> |
| |
| / { |
| model = "Versal System Controller on a2197 Memory Char board RevA"; |
| compatible = "xlnx,zynqmp-m-a2197-01-revA", "xlnx,zynqmp-a2197-revA", |
| "xlnx,zynqmp-a2197", "xlnx,zynqmp"; |
| |
| aliases { |
| ethernet0 = &gem0; |
| i2c0 = &i2c0; |
| i2c1 = &i2c1; |
| mmc0 = &sdhci0; |
| mmc1 = &sdhci1; |
| nvmem0 = &eeprom; |
| rtc0 = &rtc; |
| serial0 = &uart0; |
| serial1 = &uart1; |
| serial2 = &dcc; |
| usb0 = &usb0; |
| usb1 = &usb1; |
| spi0 = &qspi; |
| }; |
| |
| chosen { |
| bootargs = "earlycon"; |
| stdout-path = "serial0:115200n8"; |
| }; |
| |
| memory@0 { |
| device_type = "memory"; |
| reg = <0x0 0x0 0x0 0x80000000>; /* FIXME don't know how big memory is there */ |
| }; |
| |
| ina226-vcc-aux { |
| compatible = "iio-hwmon"; |
| io-channels = <&vcc_aux 0>, <&vcc_aux 1>, <&vcc_aux 2>, <&vcc_aux 3>; |
| }; |
| ina226-vcc-ram { |
| compatible = "iio-hwmon"; |
| io-channels = <&vcc_ram 0>, <&vcc_ram 1>, <&vcc_ram 2>, <&vcc_ram 3>; |
| }; |
| ina226-vcc1v1-lp4 { |
| compatible = "iio-hwmon"; |
| io-channels = <&vcc1v1_lp4 0>, <&vcc1v1_lp4 1>, <&vcc1v1_lp4 2>, <&vcc1v1_lp4 3>; |
| }; |
| ina226-vcc1v2-lp4 { |
| compatible = "iio-hwmon"; |
| io-channels = <&vcc1v2_lp4 0>, <&vcc1v2_lp4 1>, <&vcc1v2_lp4 2>, <&vcc1v2_lp4 3>; |
| }; |
| ina226-vdd1-1v8-lp4 { |
| compatible = "iio-hwmon"; |
| io-channels = <&vdd1_1v8_lp4 0>, <&vdd1_1v8_lp4 1>, <&vdd1_1v8_lp4 2>, <&vdd1_1v8_lp4 3>; |
| }; |
| ina226-vcc0v6-lp4 { |
| compatible = "iio-hwmon"; |
| io-channels = <&vcc0v6_lp4 0>, <&vcc0v6_lp4 1>, <&vcc0v6_lp4 2>, <&vcc0v6_lp4 3>; |
| }; |
| }; |
| |
| &qspi { |
| status = "okay"; |
| is-dual = <1>; |
| flash@0 { |
| compatible = "m25p80", "jedec,spi-nor"; /* 32MB */ |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x0>; |
| spi-tx-bus-width = <4>; |
| spi-rx-bus-width = <4>; |
| spi-max-frequency = <108000000>; |
| }; |
| }; |
| |
| &sdhci0 { /* emmc MIO 13-23 - with some settings 16GB */ |
| status = "okay"; |
| non-removable; |
| disable-wp; |
| bus-width = <8>; |
| xlnx,mio-bank = <0>; /* FIXME tap delay */ |
| }; |
| |
| &uart0 { /* uart0 MIO38-39 */ |
| status = "okay"; |
| }; |
| |
| &uart1 { /* uart1 MIO40-41 */ |
| status = "okay"; |
| }; |
| |
| &sdhci1 { /* sd1 MIO45-51 cd in place */ |
| status = "disable"; |
| no-1-8-v; |
| disable-wp; |
| xlnx,mio-bank = <1>; |
| }; |
| |
| &gem0 { |
| status = "okay"; |
| phy-handle = <&phy0>; |
| phy-mode = "sgmii"; /* DTG generates this properly 1512 */ |
| phy-reset-gpios = <&gpio 142 GPIO_ACTIVE_LOW>; |
| phy0: ethernet-phy@0 { /* marwell m88e1512 - SGMII */ |
| reg = <0>; |
| /* xlnx,phy-type = <PHY_TYPE_SGMII>; */ |
| }; |
| }; |
| |
| &gpio { |
| status = "okay"; |
| gpio-line-names = "SCLK_OUT", "MISO_MO1", "MO2", "MO3", "MOSI_MIO0", /* 0 - 4 */ |
| "N_SS_OUT", "", "SYS_CTRL0", "SYS_CTRL1", "SYS_CTRL2", /* 5 - 9 */ |
| "SYS_CTRL3", "SYS_CTRL4", "SYS_CTRL5", "EMMC_DAT0", "EMMC_DAT1", /* 10 - 14 */ |
| "EMMC_DAT2", "EMMC_DAT3", "EMMC_DAT4", "EMMC_DAT5", "EMMC_DAT6", /* 15 - 19 */ |
| "EMMC_DAT7", "EMMC_CMD", "EMMC_CLK", "EMMC_RST_B", "", /* 20 - 24 */ |
| "", "RXD0_IN", "TXD0_OUT", "TXD1_OUT", "RXD1_IN", /* 25 - 29 */ |
| "", "", "", "", "LP_I2C0_PMC_SCL", /* 30 - 34 */ |
| "LP_I2C0_PMC_SDA", "LP_I2C1_SCL", "LP_I2C1_SDA", "UART0_RXD_IN", "UART0_TXD_OUT", /* 35 - 39 */ |
| "UART1_TXD_OUT", "UART1_RXD_IN", "ETH_RESET_B", "", "", /* 40 - 44 */ |
| "SD1_CD_B", "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3", /* 45 - 49 */ |
| "SD1_CMD", "SD1_CLK", "USB0_CLK", "USB0_DIR", "USB0_DATA2", /* 50 - 54 */ |
| "USB0_NXT", "USB0_DATA0", "USB0_DATA1", "USB0_STP", "USB0_DATA3", /* 55 - 59 */ |
| "USB0_DATA4", "USB0_DATA5", "USB0_DATA6", "USB0_DATA7", "USB1_CLK", /* 60 - 64 */ |
| "USB1_DIR", "USB1_DATA2", "USB1_NXT", "USB1_DATA0", "USB1_DATA1", /* 65 - 69 */ |
| "USB1_STP", "USB1_DATA3", "USB1_DATA4", "USB1_DATA5", "USB1_DATA6", /* 70 - 74 */ |
| "USB1_DATA7", "ETH_MDC", "ETH_MDIO", /* 75 - 77, MIO end and EMIO start */ |
| "", "", "", "", "", /* 78 - 79 */ |
| "", "", "", "", "", /* 80 - 84 */ |
| "", "", "", "", "", /* 85 -89 */ |
| "", "", "", "", "", /* 90 - 94 */ |
| "", "", "", "", "", /* 95 - 99 */ |
| "", "", "", "", "", /* 100 - 104 */ |
| "", "", "", "", "", /* 105 - 109 */ |
| "", "", "", "", "", /* 110 - 114 */ |
| "", "", "", "", "", /* 115 - 119 */ |
| "", "", "", "", "", /* 120 - 124 */ |
| "", "", "", "", "", /* 125 - 129 */ |
| "", "", "", "", "", /* 130 - 134 */ |
| "", "", "", "", "", /* 135 - 139 */ |
| "", "", "", "", "", /* 140 - 144 */ |
| "", "", "", "", "", /* 145 - 149 */ |
| "", "", "", "", "", /* 150 - 154 */ |
| "", "", "", "", "", /* 155 - 159 */ |
| "", "", "", "", "", /* 160 - 164 */ |
| "", "", "", "", "", /* 165 - 169 */ |
| "", "", "", ""; /* 170 - 174 */ |
| }; |
| |
| &i2c0 { /* MIO 34-35 - can't stay here */ |
| status = "okay"; |
| clock-frequency = <400000>; |
| i2c-mux@74 { /* u46 */ |
| compatible = "nxp,pca9548"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x74>; |
| /* FIXME reset connected to SYSCTRL_IIC_MUX0_RESET */ |
| i2c@0 { /* PMBUS must be enabled via SW21 */ |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0>; |
| reg_vcc1v2_lp4: tps544@15 { /* u97 */ |
| compatible = "ti,tps544b25"; |
| reg = <0x15>; |
| }; |
| reg_vcc1v1_lp4: tps544@16 { /* u95 */ |
| compatible = "ti,tps544b25"; |
| reg = <0x16>; |
| }; |
| reg_vdd1_1v8_lp4: tps544@17 { /* u99 */ |
| compatible = "ti,tps544b25"; |
| reg = <0x17>; |
| }; |
| /* UTIL_PMBUS connection */ |
| reg_vcc1v8: tps544@13 { /* u92 */ |
| compatible = "ti,tps544b25"; |
| reg = <0x13>; |
| }; |
| reg_vcc3v3: tps544@14 { /* u93 */ |
| compatible = "ti,tps544b25"; |
| reg = <0x14>; |
| }; |
| reg_vcc5v0: tps544@1e { /* u94 */ |
| compatible = "ti,tps544b25"; |
| reg = <0x1e>; |
| }; |
| }; |
| i2c@1 { /* PMBUS_INA226 */ |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <1>; |
| vcc_aux: ina226@42 { /* u86 */ |
| compatible = "ti,ina226"; |
| #io-channel-cells = <1>; |
| label = "ina226-vcc-aux"; |
| reg = <0x42>; |
| shunt-resistor = <5000>; |
| }; |
| vcc_ram: ina226@43 { /* u81 */ |
| compatible = "ti,ina226"; |
| #io-channel-cells = <1>; |
| label = "ina226-vcc-ram"; |
| reg = <0x43>; |
| shunt-resistor = <5000>; |
| }; |
| vcc1v1_lp4: ina226@46 { /* u96 */ |
| compatible = "ti,ina226"; |
| #io-channel-cells = <1>; |
| label = "ina226-vcc1v1-lp4"; |
| reg = <0x46>; |
| shunt-resistor = <5000>; |
| }; |
| vcc1v2_lp4: ina226@47 { /* u98 */ |
| compatible = "ti,ina226"; |
| #io-channel-cells = <1>; |
| label = "ina226-vcc1v2-lp4"; |
| reg = <0x47>; |
| shunt-resistor = <5000>; |
| }; |
| vdd1_1v8_lp4: ina226@48 { /* u100 */ |
| compatible = "ti,ina226"; |
| #io-channel-cells = <1>; |
| label = "ina226-vdd1-1v8-lp4"; |
| reg = <0x48>; |
| shunt-resistor = <5000>; |
| }; |
| vcc0v6_lp4: ina226@49 { /* u101 */ |
| compatible = "ti,ina226"; |
| #io-channel-cells = <1>; |
| label = "ina226-vcc0v6-lp4"; |
| reg = <0x49>; |
| shunt-resistor = <5000>; |
| }; |
| }; |
| i2c@2 { /* PMBUS1 */ |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <2>; |
| reg_vccint: tps53681@60 { /* u69 - 0xc0 */ |
| compatible = "ti,tps53681", "ti,tps53679"; |
| reg = <0x60>; |
| }; |
| reg_vcc_pmc: tps544@7 { /* u80 */ |
| compatible = "ti,tps544b25"; |
| reg = <0x7>; |
| }; |
| reg_vcc_ram: tps544@8 { /* u82 */ |
| compatible = "ti,tps544b25"; |
| reg = <0x8>; |
| }; |
| reg_vcc_pslp: tps544@9 { /* u83 */ |
| compatible = "ti,tps544b25"; |
| reg = <0x9>; |
| }; |
| reg_vcc_psfp: tps544@a { /* u84 */ |
| compatible = "ti,tps544b25"; |
| reg = <0xa>; |
| }; |
| reg_vccaux: tps544@d { /* u85 */ |
| compatible = "ti,tps544b25"; |
| reg = <0xd>; |
| }; |
| reg_vccaux_pmc: tps544@e { /* u87 */ |
| compatible = "ti,tps544b25"; |
| reg = <0xe>; |
| }; |
| reg_vcco_500: tps544@f { /* u88 */ |
| compatible = "ti,tps544b25"; |
| reg = <0xf>; |
| }; |
| reg_vcco_501: tps544@10 { /* u89 */ |
| compatible = "ti,tps544b25"; |
| reg = <0x10>; |
| }; |
| reg_vcco_502: tps544@11 { /* u90 */ |
| compatible = "ti,tps544b25"; |
| reg = <0x11>; |
| }; |
| reg_vcco_503: tps544@12 { /* u91 */ |
| compatible = "ti,tps544b25"; |
| reg = <0x12>; |
| }; |
| }; |
| i2c@3 { /* MEM PMBUS - FIXME bug in schematics */ |
| #address-cells = <1>; |
| #size-cells = <0>; |
| /* reg = <3>; */ |
| }; |
| i2c@4 { /* LP_I2C_SM */ |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <4>; |
| /* connected to U20G */ |
| }; |
| /* 5-7 unused */ |
| }; |
| }; |
| |
| /* TODO sysctrl via J239 */ |
| /* TODO samtec J212G/H via J242 */ |
| /* TODO teensy via U30 PCA9543A bus 1 */ |
| &i2c1 { /* i2c1 MIO 36-37 */ |
| status = "okay"; |
| clock-frequency = <400000>; |
| |
| /* Must be enabled via J242 */ |
| eeprom_versal: eeprom@51 { /* x-prc-01-revA u116, x-prc-02-revA u12 */ |
| compatible = "atmel,24c02"; |
| reg = <0x51>; |
| }; |
| |
| i2c-mux@74 { /* u47 */ |
| compatible = "nxp,pca9548"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x74>; |
| /* FIXME reset connected to SYSCTRL_IIC_MUX1_RESET */ |
| dc_i2c: i2c@0 { /* DC_I2C */ |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0>; |
| /* Use for storing information about SC board */ |
| eeprom: eeprom@54 { /* u51 - m24128 16kB FIXME addr */ |
| compatible = "atmel,24c08"; |
| reg = <0x54>; |
| }; |
| si570_ref_clk: clock-generator@5d { /* u26 */ |
| #clock-cells = <0>; |
| compatible = "silabs,si570"; |
| reg = <0x5d>; /* FIXME addr */ |
| temperature-stability = <50>; |
| factory-fout = <33333333>; |
| clock-frequency = <33333333>; |
| clock-output-names = "REF_CLK"; /* FIXME */ |
| silabs,skip-recall; |
| }; |
| /* Connection via Samtec U20D */ |
| /* Use for storing information about X-PRC card */ |
| x_prc_eeprom: eeprom@52 { /* x-prc-01-revA u120, x-prc-02-revA u16 */ |
| compatible = "atmel,24c02"; |
| reg = <0x52>; |
| }; |
| |
| /* Use for setting up certain features on X-PRC card */ |
| x_prc_tca9534: gpio@22 { /* x-prc-01-revA u121, x-prc-02-revA u17 */ |
| compatible = "nxp,pca9534"; |
| reg = <0x22>; |
| gpio-controller; /* IRQ not connected */ |
| #gpio-cells = <2>; |
| gpio-line-names = "sw4_1", "sw4_2", "sw4_3", "sw4_4", |
| "", "", "", ""; |
| gtr_sel0 { |
| gpio-hog; |
| gpios = <0 0>; |
| input; /* FIXME add meaning */ |
| line-name = "sw4_1"; |
| }; |
| gtr_sel1 { |
| gpio-hog; |
| gpios = <1 0>; |
| input; /* FIXME add meaning */ |
| line-name = "sw4_2"; |
| }; |
| gtr_sel2 { |
| gpio-hog; |
| gpios = <2 0>; |
| input; /* FIXME add meaning */ |
| line-name = "sw4_3"; |
| }; |
| gtr_sel3 { |
| gpio-hog; |
| gpios = <3 0>; |
| input; /* FIXME add meaning */ |
| line-name = "sw4_4"; |
| }; |
| }; |
| }; |
| i2c@2 { /* C0_LP4 */ |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <2>; |
| si570_c0_lp4: clock-generator@55 { /* u10 */ |
| #clock-cells = <0>; |
| compatible = "silabs,si570"; |
| reg = <0x55>; |
| temperature-stability = <50>; |
| factory-fout = <30000000>; |
| clock-frequency = <30000000>; |
| clock-output-names = "C0_LP4_SI570_CLK"; |
| }; |
| }; |
| i2c@3 { /* C1_LP4 */ |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <3>; |
| si570_c1_lp4: clock-generator@5d { /* u10 */ |
| #clock-cells = <0>; |
| compatible = "silabs,si570"; |
| reg = <0x5d>; /* FIXME addr */ |
| temperature-stability = <50>; |
| factory-fout = <30000000>; |
| clock-frequency = <30000000>; |
| clock-output-names = "C1_LP4_SI570_CLK"; |
| }; |
| }; |
| i2c@4 { /* C2_LP4 */ |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <4>; |
| si570_c2_lp4: clock-generator@55 { /* u10 */ |
| #clock-cells = <0>; |
| compatible = "silabs,si570"; |
| reg = <0x55>; |
| temperature-stability = <50>; |
| factory-fout = <30000000>; |
| clock-frequency = <30000000>; |
| clock-output-names = "C2_LP4_SI570_CLK"; |
| }; |
| }; |
| i2c@5 { /* C3_LP4 */ |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <5>; |
| si570_c3_lp4: clock-generator@55 { /* u15 */ |
| #clock-cells = <0>; |
| compatible = "silabs,si570"; |
| reg = <0x55>; |
| temperature-stability = <50>; |
| factory-fout = <30000000>; |
| clock-frequency = <30000000>; |
| clock-output-names = "C3_LP4_SI570_CLK"; |
| }; |
| }; |
| i2c@6 { /* HSDP_SI570 */ |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <6>; |
| si570_hsdp: clock-generator@5d { /* u19 */ |
| #clock-cells = <0>; |
| compatible = "silabs,si570"; |
| reg = <0x5d>; /* FIXME addr */ |
| temperature-stability = <50>; |
| factory-fout = <156250000>; |
| clock-frequency = <156250000>; |
| clock-output-names = "HSDP_SI570"; |
| }; |
| }; |
| }; |
| }; |
| |
| &usb0 { |
| status = "okay"; |
| xlnx,usb-polarity = <0>; |
| xlnx,usb-reset-mode = <0>; |
| }; |
| |
| &dwc3_0 { |
| status = "okay"; |
| dr_mode = "host"; |
| /* dr_mode = "peripheral"; */ |
| maximum-speed = "high-speed"; |
| }; |
| |
| &usb1 { |
| status = "disabled"; /* not at mem board */ |
| xlnx,usb-polarity = <0>; |
| xlnx,usb-reset-mode = <0>; |
| }; |
| |
| &dwc3_1 { |
| /delete-property/ phy-names ; |
| /delete-property/ phys ; |
| maximum-speed = "high-speed"; |
| snps,dis_u2_susphy_quirk ; |
| snps,dis_u3_susphy_quirk ; |
| status = "disabled"; |
| }; |