| /* |
| * Copyright (C) 2013 Samsung Electronics |
| * Sanghee Kim <sh0130.kim@samsung.com> |
| * Piotr Wilczek <p.wilczek@samsung.com> |
| * |
| * Configuation settings for the SAMSUNG TRATS2 (EXYNOS4412) board. |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #ifndef __CONFIG_TRATS2_H |
| #define __CONFIG_TRATS2_H |
| |
| #include <configs/exynos4-common.h> |
| |
| #define CONFIG_TIZEN /* TIZEN lib */ |
| |
| #define CONFIG_SYS_L2CACHE_OFF |
| #ifndef CONFIG_SYS_L2CACHE_OFF |
| #define CONFIG_SYS_L2_PL310 |
| #define CONFIG_SYS_PL310_BASE 0x10502000 |
| #endif |
| |
| /* TRATS2 has 4 banks of DRAM */ |
| #define CONFIG_NR_DRAM_BANKS 4 |
| #define CONFIG_SYS_SDRAM_BASE 0x40000000 |
| #define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE |
| #define SDRAM_BANK_SIZE (256 << 20) /* 256 MB */ |
| /* memtest works on */ |
| #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE |
| #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5E00000) |
| #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000) |
| |
| #define CONFIG_SYS_TEXT_BASE 0x43e00000 |
| |
| /* select serial console configuration */ |
| #define CONFIG_SERIAL2 |
| #define CONFIG_BAUDRATE 115200 |
| |
| /* Console configuration */ |
| #define CONFIG_SYS_CONSOLE_INFO_QUIET |
| #define CONFIG_SYS_CONSOLE_IS_IN_ENV |
| |
| #define CONFIG_BOOTARGS "Please use defined boot" |
| #define CONFIG_BOOTCOMMAND "run autoboot" |
| #define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0" |
| |
| #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \ |
| - GENERATED_GBL_DATA_SIZE) |
| |
| #define CONFIG_SYS_MEM_TOP_HIDE (1 << 20) /* ram console */ |
| |
| #define CONFIG_SYS_MONITOR_BASE 0x00000000 |
| |
| #define CONFIG_ENV_IS_IN_MMC |
| #define CONFIG_SYS_MMC_ENV_DEV CONFIG_MMC_DEFAULT_DEV |
| #define CONFIG_ENV_SIZE 4096 |
| #define CONFIG_ENV_OFFSET ((32 - 4) << 10) /* 32KiB - 4KiB */ |
| |
| #define CONFIG_ENV_OVERWRITE |
| |
| #define CONFIG_ENV_VARS_UBOOT_CONFIG |
| #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG |
| |
| /* Tizen - partitions definitions */ |
| #define PARTS_CSA "csa-mmc" |
| #define PARTS_BOOT "boot" |
| #define PARTS_QBOOT "qboot" |
| #define PARTS_CSC "csc" |
| #define PARTS_ROOT "platform" |
| #define PARTS_DATA "data" |
| #define PARTS_UMS "ums" |
| |
| #define PARTS_DEFAULT \ |
| "uuid_disk=${uuid_gpt_disk};" \ |
| "name="PARTS_CSA",start=5MiB,size=8MiB,uuid=${uuid_gpt_"PARTS_CSA"};" \ |
| "name="PARTS_BOOT",size=60MiB,uuid=${uuid_gpt_"PARTS_BOOT"};" \ |
| "name="PARTS_QBOOT",size=100MiB,uuid=${uuid_gpt_"PARTS_QBOOT"};" \ |
| "name="PARTS_CSC",size=150MiB,uuid=${uuid_gpt_"PARTS_CSC"};" \ |
| "name="PARTS_ROOT",size=1536MiB,uuid=${uuid_gpt_"PARTS_ROOT"};" \ |
| "name="PARTS_DATA",size=3000MiB,uuid=${uuid_gpt_"PARTS_DATA"};" \ |
| "name="PARTS_UMS",size=-,uuid=${uuid_gpt_"PARTS_UMS"}\0" \ |
| |
| #define CONFIG_DFU_ALT \ |
| "u-boot raw 0x80 0x800;" \ |
| "/uImage ext4 0 2;" \ |
| "/modem.bin ext4 0 2;" \ |
| "/exynos4412-trats2.dtb ext4 0 2;" \ |
| ""PARTS_CSA" part 0 1;" \ |
| ""PARTS_BOOT" part 0 2;" \ |
| ""PARTS_QBOOT" part 0 3;" \ |
| ""PARTS_CSC" part 0 4;" \ |
| ""PARTS_ROOT" part 0 5;" \ |
| ""PARTS_DATA" part 0 6;" \ |
| ""PARTS_UMS" part 0 7;" \ |
| "params.bin raw 0x38 0x8;" \ |
| "/Image.itb ext4 0 2\0" |
| |
| #define CONFIG_EXTRA_ENV_SETTINGS \ |
| "bootk=" \ |
| "run loaduimage;" \ |
| "if run loaddtb; then " \ |
| "bootm 0x40007FC0 - ${fdtaddr};" \ |
| "fi;" \ |
| "bootm 0x40007FC0;\0" \ |
| "updatebackup=" \ |
| "mmc dev 0 2; mmc write 0x51000000 0 0x800;" \ |
| " mmc dev 0 0\0" \ |
| "updatebootb=" \ |
| "mmc read 0x51000000 0x80 0x800; run updatebackup\0" \ |
| "mmcboot=" \ |
| "setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \ |
| "${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo}; " \ |
| "run bootk\0" \ |
| "bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \ |
| "boottrace=setenv opts initcall_debug; run bootcmd\0" \ |
| "verify=n\0" \ |
| "rootfstype=ext4\0" \ |
| "console=" CONFIG_DEFAULT_CONSOLE \ |
| "kernelname=uImage\0" \ |
| "loaduimage=ext4load mmc ${mmcdev}:${mmcbootpart} 0x40007FC0 " \ |
| "${kernelname}\0" \ |
| "loaddtb=ext4load mmc ${mmcdev}:${mmcbootpart} ${fdtaddr} " \ |
| "${fdtfile}\0" \ |
| "mmcdev=" __stringify(CONFIG_MMC_DEFAULT_DEV) "\0" \ |
| "mmcbootpart=2\0" \ |
| "mmcrootpart=5\0" \ |
| "opts=always_resume=1\0" \ |
| "partitions=" PARTS_DEFAULT \ |
| "dfu_alt_info=" CONFIG_DFU_ALT \ |
| "uartpath=ap\0" \ |
| "usbpath=ap\0" \ |
| "consoleon=set console console=ttySAC2,115200n8; save; reset\0" \ |
| "consoleoff=set console console=ram; save; reset\0" \ |
| "spladdr=0x40000100\0" \ |
| "splsize=0x200\0" \ |
| "splfile=falcon.bin\0" \ |
| "spl_export=" \ |
| "setexpr spl_imgsize ${splsize} + 8 ;" \ |
| "setenv spl_imgsize 0x${spl_imgsize};" \ |
| "setexpr spl_imgaddr ${spladdr} - 8 ;" \ |
| "setexpr spl_addr_tmp ${spladdr} - 4 ;" \ |
| "mw.b ${spl_imgaddr} 0x00 ${spl_imgsize};run loaduimage;" \ |
| "setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \ |
| "${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo};" \ |
| "spl export atags 0x40007FC0;" \ |
| "crc32 ${spladdr} ${splsize} ${spl_imgaddr};" \ |
| "mw.l ${spl_addr_tmp} ${splsize};" \ |
| "ext4write mmc ${mmcdev}:${mmcbootpart}" \ |
| " /${splfile} ${spl_imgaddr} ${spl_imgsize};" \ |
| "setenv spl_imgsize;" \ |
| "setenv spl_imgaddr;" \ |
| "setenv spl_addr_tmp;\0" \ |
| CONFIG_EXTRA_ENV_ITB \ |
| "fdtaddr=40800000\0" \ |
| |
| /* GPT */ |
| #define CONFIG_RANDOM_UUID |
| |
| /* I2C */ |
| #include <asm/arch/gpio.h> |
| |
| |
| #define CONFIG_SYS_I2C |
| #define CONFIG_SYS_I2C_S3C24X0 |
| #define CONFIG_SYS_I2C_S3C24X0_SPEED 100000 |
| #define CONFIG_SYS_I2C_S3C24X0_SLAVE 0 |
| #define CONFIG_MAX_I2C_NUM 8 |
| #define CONFIG_SYS_I2C_SOFT |
| #define CONFIG_SYS_I2C_SOFT_SPEED 50000 |
| #define CONFIG_SYS_I2C_SOFT_SLAVE 0x00 |
| #define I2C_SOFT_DECLARATIONS2 |
| #define CONFIG_SYS_I2C_SOFT_SPEED_2 50000 |
| #define CONFIG_SYS_I2C_SOFT_SLAVE_2 0x00 |
| #define CONFIG_SOFT_I2C_READ_REPEATED_START |
| #define CONFIG_SYS_I2C_INIT_BOARD |
| |
| #ifndef __ASSEMBLY__ |
| int get_soft_i2c_scl_pin(void); |
| int get_soft_i2c_sda_pin(void); |
| #endif |
| #define CONFIG_SOFT_I2C_GPIO_SCL get_soft_i2c_scl_pin() |
| #define CONFIG_SOFT_I2C_GPIO_SDA get_soft_i2c_sda_pin() |
| |
| /* POWER */ |
| #define CONFIG_POWER |
| #define CONFIG_POWER_I2C |
| #define CONFIG_POWER_MAX77686 |
| #define CONFIG_POWER_PMIC_MAX77693 |
| #define CONFIG_POWER_MUIC_MAX77693 |
| #define CONFIG_POWER_FG_MAX77693 |
| #define CONFIG_POWER_BATTERY_TRATS2 |
| |
| /* Security subsystem - enable hw_rand() */ |
| #define CONFIG_EXYNOS_ACE_SHA |
| #define CONFIG_LIB_HW_RAND |
| |
| /* Common misc for Samsung */ |
| #define CONFIG_MISC_COMMON |
| |
| #define CONFIG_MISC_INIT_R |
| |
| /* Download menu - Samsung common */ |
| #define CONFIG_LCD_MENU |
| #define CONFIG_LCD_MENU_BOARD |
| |
| /* Download menu - definitions for check keys */ |
| #ifndef __ASSEMBLY__ |
| #include <power/max77686_pmic.h> |
| |
| #define KEY_PWR_PMIC_NAME "MAX77686_PMIC" |
| #define KEY_PWR_STATUS_REG MAX77686_REG_PMIC_STATUS1 |
| #define KEY_PWR_STATUS_MASK (1 << 0) |
| #define KEY_PWR_INTERRUPT_REG MAX77686_REG_PMIC_INT1 |
| #define KEY_PWR_INTERRUPT_MASK (1 << 1) |
| |
| #define KEY_VOL_UP_GPIO EXYNOS4X12_GPIO_X22 |
| #define KEY_VOL_DOWN_GPIO EXYNOS4X12_GPIO_X33 |
| #endif /* __ASSEMBLY__ */ |
| |
| /* LCD console */ |
| #define LCD_BPP LCD_COLOR16 |
| #define CONFIG_SYS_WHITE_ON_BLACK |
| |
| /* LCD */ |
| #define CONFIG_EXYNOS_FB |
| #define CONFIG_LCD |
| #define CONFIG_CMD_BMP |
| #define CONFIG_BMP_16BPP |
| #define CONFIG_FB_ADDR 0x52504000 |
| #define CONFIG_S6E8AX0 |
| #define CONFIG_EXYNOS_MIPI_DSIM |
| #define CONFIG_VIDEO_BMP_GZIP |
| #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE ((500 * 160 * 4) + 54) |
| |
| #endif /* __CONFIG_H */ |