| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * rtl8169.c : U-Boot driver for the RealTek RTL8169 |
| * |
| * Masami Komiya (mkomiya@sonare.it) |
| * |
| * Most part is taken from r8169.c of etherboot |
| * |
| */ |
| |
| /************************************************************************** |
| * r8169.c: Etherboot device driver for the RealTek RTL-8169 Gigabit |
| * Written 2003 by Timothy Legge <tlegge@rogers.com> |
| * |
| * Portions of this code based on: |
| * r8169.c: A RealTek RTL-8169 Gigabit Ethernet driver |
| * for Linux kernel 2.4.x. |
| * |
| * Written 2002 ShuChen <shuchen@realtek.com.tw> |
| * See Linux Driver for full information |
| * |
| * Linux Driver Version 1.27a, 10.02.2002 |
| * |
| * Thanks to: |
| * Jean Chen of RealTek Semiconductor Corp. for |
| * providing the evaluation NIC used to develop |
| * this driver. RealTek's support for Etherboot |
| * is appreciated. |
| * |
| * REVISION HISTORY: |
| * ================ |
| * |
| * v1.0 11-26-2003 timlegge Initial port of Linux driver |
| * v1.5 01-17-2004 timlegge Initial driver output cleanup |
| * |
| * Indent Options: indent -kr -i8 |
| ***************************************************************************/ |
| /* |
| * 26 August 2006 Mihai Georgian <u-boot@linuxnotincluded.org.uk> |
| * Modified to use le32_to_cpu and cpu_to_le32 properly |
| */ |
| #include <common.h> |
| #include <cpu_func.h> |
| #include <dm.h> |
| #include <errno.h> |
| #include <log.h> |
| #include <malloc.h> |
| #include <memalign.h> |
| #include <net.h> |
| #ifndef CONFIG_DM_ETH |
| #include <netdev.h> |
| #endif |
| #include <asm/cache.h> |
| #include <asm/io.h> |
| #include <pci.h> |
| |
| #undef DEBUG_RTL8169 |
| #undef DEBUG_RTL8169_TX |
| #undef DEBUG_RTL8169_RX |
| |
| #define drv_version "v1.5" |
| #define drv_date "01-17-2004" |
| |
| static unsigned long ioaddr; |
| |
| /* Condensed operations for readability. */ |
| #define currticks() get_timer(0) |
| |
| /* media options */ |
| #define MAX_UNITS 8 |
| static int media[MAX_UNITS] = { -1, -1, -1, -1, -1, -1, -1, -1 }; |
| |
| /* MAC address length*/ |
| #define MAC_ADDR_LEN 6 |
| |
| /* max supported gigabit ethernet frame size -- must be at least (dev->mtu+14+4).*/ |
| #define MAX_ETH_FRAME_SIZE 1536 |
| |
| #define TX_FIFO_THRESH 256 /* In bytes */ |
| |
| #define RX_FIFO_THRESH 7 /* 7 means NO threshold, Rx buffer level before first PCI xfer. */ |
| #define RX_DMA_BURST 6 /* Maximum PCI burst, '6' is 1024 */ |
| #define TX_DMA_BURST 6 /* Maximum PCI burst, '6' is 1024 */ |
| #define EarlyTxThld 0x3F /* 0x3F means NO early transmit */ |
| #define RxPacketMaxSize 0x0800 /* Maximum size supported is 16K-1 */ |
| #define InterFrameGap 0x03 /* 3 means InterFrameGap = the shortest one */ |
| |
| #define NUM_TX_DESC 1 /* Number of Tx descriptor registers */ |
| #ifdef CONFIG_SYS_RX_ETH_BUFFER |
| #define NUM_RX_DESC CONFIG_SYS_RX_ETH_BUFFER |
| #else |
| #define NUM_RX_DESC 4 /* Number of Rx descriptor registers */ |
| #endif |
| #define RX_BUF_SIZE 1536 /* Rx Buffer size */ |
| #define RX_BUF_LEN 8192 |
| |
| #define RTL_MIN_IO_SIZE 0x80 |
| #define TX_TIMEOUT (6*HZ) |
| |
| /* write/read MMIO register. Notice: {read,write}[wl] do the necessary swapping */ |
| #define RTL_W8(reg, val8) writeb((val8), ioaddr + (reg)) |
| #define RTL_W16(reg, val16) writew((val16), ioaddr + (reg)) |
| #define RTL_W32(reg, val32) writel((val32), ioaddr + (reg)) |
| #define RTL_R8(reg) readb(ioaddr + (reg)) |
| #define RTL_R16(reg) readw(ioaddr + (reg)) |
| #define RTL_R32(reg) readl(ioaddr + (reg)) |
| |
| #define bus_to_phys(a) pci_mem_to_phys((pci_dev_t)(unsigned long)dev->priv, \ |
| (pci_addr_t)(unsigned long)a) |
| #define phys_to_bus(a) pci_phys_to_mem((pci_dev_t)(unsigned long)dev->priv, \ |
| (phys_addr_t)a) |
| |
| enum RTL8169_registers { |
| MAC0 = 0, /* Ethernet hardware address. */ |
| MAR0 = 8, /* Multicast filter. */ |
| TxDescStartAddrLow = 0x20, |
| TxDescStartAddrHigh = 0x24, |
| TxHDescStartAddrLow = 0x28, |
| TxHDescStartAddrHigh = 0x2c, |
| FLASH = 0x30, |
| ERSR = 0x36, |
| ChipCmd = 0x37, |
| TxPoll = 0x38, |
| IntrMask = 0x3C, |
| IntrStatus = 0x3E, |
| TxConfig = 0x40, |
| RxConfig = 0x44, |
| RxMissed = 0x4C, |
| Cfg9346 = 0x50, |
| Config0 = 0x51, |
| Config1 = 0x52, |
| Config2 = 0x53, |
| Config3 = 0x54, |
| Config4 = 0x55, |
| Config5 = 0x56, |
| MultiIntr = 0x5C, |
| PHYAR = 0x60, |
| TBICSR = 0x64, |
| TBI_ANAR = 0x68, |
| TBI_LPAR = 0x6A, |
| PHYstatus = 0x6C, |
| RxMaxSize = 0xDA, |
| CPlusCmd = 0xE0, |
| RxDescStartAddrLow = 0xE4, |
| RxDescStartAddrHigh = 0xE8, |
| EarlyTxThres = 0xEC, |
| FuncEvent = 0xF0, |
| FuncEventMask = 0xF4, |
| FuncPresetState = 0xF8, |
| FuncForceEvent = 0xFC, |
| }; |
| |
| enum RTL8169_register_content { |
| /*InterruptStatusBits */ |
| SYSErr = 0x8000, |
| PCSTimeout = 0x4000, |
| SWInt = 0x0100, |
| TxDescUnavail = 0x80, |
| RxFIFOOver = 0x40, |
| RxUnderrun = 0x20, |
| RxOverflow = 0x10, |
| TxErr = 0x08, |
| TxOK = 0x04, |
| RxErr = 0x02, |
| RxOK = 0x01, |
| |
| /*RxStatusDesc */ |
| RxRES = 0x00200000, |
| RxCRC = 0x00080000, |
| RxRUNT = 0x00100000, |
| RxRWT = 0x00400000, |
| |
| /*ChipCmdBits */ |
| CmdReset = 0x10, |
| CmdRxEnb = 0x08, |
| CmdTxEnb = 0x04, |
| RxBufEmpty = 0x01, |
| |
| /*Cfg9346Bits */ |
| Cfg9346_Lock = 0x00, |
| Cfg9346_Unlock = 0xC0, |
| |
| /*rx_mode_bits */ |
| AcceptErr = 0x20, |
| AcceptRunt = 0x10, |
| AcceptBroadcast = 0x08, |
| AcceptMulticast = 0x04, |
| AcceptMyPhys = 0x02, |
| AcceptAllPhys = 0x01, |
| |
| /*RxConfigBits */ |
| RxCfgFIFOShift = 13, |
| RxCfgDMAShift = 8, |
| |
| /*TxConfigBits */ |
| TxInterFrameGapShift = 24, |
| TxDMAShift = 8, /* DMA burst value (0-7) is shift this many bits */ |
| |
| /*rtl8169_PHYstatus */ |
| TBI_Enable = 0x80, |
| TxFlowCtrl = 0x40, |
| RxFlowCtrl = 0x20, |
| _1000bpsF = 0x10, |
| _100bps = 0x08, |
| _10bps = 0x04, |
| LinkStatus = 0x02, |
| FullDup = 0x01, |
| |
| /*GIGABIT_PHY_registers */ |
| PHY_CTRL_REG = 0, |
| PHY_STAT_REG = 1, |
| PHY_AUTO_NEGO_REG = 4, |
| PHY_1000_CTRL_REG = 9, |
| |
| /*GIGABIT_PHY_REG_BIT */ |
| PHY_Restart_Auto_Nego = 0x0200, |
| PHY_Enable_Auto_Nego = 0x1000, |
| |
| /* PHY_STAT_REG = 1; */ |
| PHY_Auto_Nego_Comp = 0x0020, |
| |
| /* PHY_AUTO_NEGO_REG = 4; */ |
| PHY_Cap_10_Half = 0x0020, |
| PHY_Cap_10_Full = 0x0040, |
| PHY_Cap_100_Half = 0x0080, |
| PHY_Cap_100_Full = 0x0100, |
| |
| /* PHY_1000_CTRL_REG = 9; */ |
| PHY_Cap_1000_Full = 0x0200, |
| |
| PHY_Cap_Null = 0x0, |
| |
| /*_MediaType*/ |
| _10_Half = 0x01, |
| _10_Full = 0x02, |
| _100_Half = 0x04, |
| _100_Full = 0x08, |
| _1000_Full = 0x10, |
| |
| /*_TBICSRBit*/ |
| TBILinkOK = 0x02000000, |
| }; |
| |
| static struct { |
| const char *name; |
| u8 version; /* depend on RTL8169 docs */ |
| u32 RxConfigMask; /* should clear the bits supported by this chip */ |
| } rtl_chip_info[] = { |
| {"RTL-8169", 0x00, 0xff7e1880,}, |
| {"RTL-8169", 0x04, 0xff7e1880,}, |
| {"RTL-8169", 0x00, 0xff7e1880,}, |
| {"RTL-8169s/8110s", 0x02, 0xff7e1880,}, |
| {"RTL-8169s/8110s", 0x04, 0xff7e1880,}, |
| {"RTL-8169sb/8110sb", 0x10, 0xff7e1880,}, |
| {"RTL-8169sc/8110sc", 0x18, 0xff7e1880,}, |
| {"RTL-8168b/8111sb", 0x30, 0xff7e1880,}, |
| {"RTL-8168b/8111sb", 0x38, 0xff7e1880,}, |
| {"RTL-8168c/8111c", 0x3c, 0xff7e1880,}, |
| {"RTL-8168d/8111d", 0x28, 0xff7e1880,}, |
| {"RTL-8168evl/8111evl", 0x2e, 0xff7e1880,}, |
| {"RTL-8168/8111g", 0x4c, 0xff7e1880,}, |
| {"RTL-8101e", 0x34, 0xff7e1880,}, |
| {"RTL-8100e", 0x32, 0xff7e1880,}, |
| {"RTL-8168h/8111h", 0x54, 0xff7e1880,}, |
| }; |
| |
| enum _DescStatusBit { |
| OWNbit = 0x80000000, |
| EORbit = 0x40000000, |
| FSbit = 0x20000000, |
| LSbit = 0x10000000, |
| }; |
| |
| struct TxDesc { |
| u32 status; |
| u32 vlan_tag; |
| u32 buf_addr; |
| u32 buf_Haddr; |
| }; |
| |
| struct RxDesc { |
| u32 status; |
| u32 vlan_tag; |
| u32 buf_addr; |
| u32 buf_Haddr; |
| }; |
| |
| static unsigned char rxdata[RX_BUF_LEN]; |
| |
| #define RTL8169_DESC_SIZE 16 |
| |
| #if ARCH_DMA_MINALIGN > 256 |
| # define RTL8169_ALIGN ARCH_DMA_MINALIGN |
| #else |
| # define RTL8169_ALIGN 256 |
| #endif |
| |
| /* |
| * Warn if the cache-line size is larger than the descriptor size. In such |
| * cases the driver will likely fail because the CPU needs to flush the cache |
| * when requeuing RX buffers, therefore descriptors written by the hardware |
| * may be discarded. |
| * |
| * This can be fixed by defining CONFIG_SYS_NONCACHED_MEMORY which will cause |
| * the driver to allocate descriptors from a pool of non-cached memory. |
| */ |
| #if RTL8169_DESC_SIZE < ARCH_DMA_MINALIGN |
| #if !defined(CONFIG_SYS_NONCACHED_MEMORY) && \ |
| !CONFIG_IS_ENABLED(SYS_DCACHE_OFF) && !defined(CONFIG_X86) |
| #warning cache-line size is larger than descriptor size |
| #endif |
| #endif |
| |
| /* |
| * Create a static buffer of size RX_BUF_SZ for each TX Descriptor. All |
| * descriptors point to a part of this buffer. |
| */ |
| DEFINE_ALIGN_BUFFER(u8, txb, NUM_TX_DESC * RX_BUF_SIZE, RTL8169_ALIGN); |
| |
| /* |
| * Create a static buffer of size RX_BUF_SZ for each RX Descriptor. All |
| * descriptors point to a part of this buffer. |
| */ |
| DEFINE_ALIGN_BUFFER(u8, rxb, NUM_RX_DESC * RX_BUF_SIZE, RTL8169_ALIGN); |
| |
| struct rtl8169_private { |
| ulong iobase; |
| void *mmio_addr; /* memory map physical address */ |
| int chipset; |
| unsigned long cur_rx; /* Index into the Rx descriptor buffer of next Rx pkt. */ |
| unsigned long cur_tx; /* Index into the Tx descriptor buffer of next Rx pkt. */ |
| unsigned long dirty_tx; |
| struct TxDesc *TxDescArray; /* Index of 256-alignment Tx Descriptor buffer */ |
| struct RxDesc *RxDescArray; /* Index of 256-alignment Rx Descriptor buffer */ |
| unsigned char *RxBufferRings; /* Index of Rx Buffer */ |
| unsigned char *RxBufferRing[NUM_RX_DESC]; /* Index of Rx Buffer array */ |
| unsigned char *Tx_skbuff[NUM_TX_DESC]; |
| } tpx; |
| |
| static struct rtl8169_private *tpc; |
| |
| static const unsigned int rtl8169_rx_config = |
| (RX_FIFO_THRESH << RxCfgFIFOShift) | (RX_DMA_BURST << RxCfgDMAShift); |
| |
| static struct pci_device_id supported[] = { |
| { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8167) }, |
| { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8168) }, |
| { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8169) }, |
| {} |
| }; |
| |
| void mdio_write(int RegAddr, int value) |
| { |
| int i; |
| |
| RTL_W32(PHYAR, 0x80000000 | (RegAddr & 0xFF) << 16 | value); |
| udelay(1000); |
| |
| for (i = 2000; i > 0; i--) { |
| /* Check if the RTL8169 has completed writing to the specified MII register */ |
| if (!(RTL_R32(PHYAR) & 0x80000000)) { |
| break; |
| } else { |
| udelay(100); |
| } |
| } |
| } |
| |
| int mdio_read(int RegAddr) |
| { |
| int i, value = -1; |
| |
| RTL_W32(PHYAR, 0x0 | (RegAddr & 0xFF) << 16); |
| udelay(1000); |
| |
| for (i = 2000; i > 0; i--) { |
| /* Check if the RTL8169 has completed retrieving data from the specified MII register */ |
| if (RTL_R32(PHYAR) & 0x80000000) { |
| value = (int) (RTL_R32(PHYAR) & 0xFFFF); |
| break; |
| } else { |
| udelay(100); |
| } |
| } |
| return value; |
| } |
| |
| static int rtl8169_init_board(unsigned long dev_iobase, const char *name) |
| { |
| int i; |
| u32 tmp; |
| |
| #ifdef DEBUG_RTL8169 |
| printf ("%s\n", __FUNCTION__); |
| #endif |
| ioaddr = dev_iobase; |
| |
| /* Soft reset the chip. */ |
| RTL_W8(ChipCmd, CmdReset); |
| |
| /* Check that the chip has finished the reset. */ |
| for (i = 1000; i > 0; i--) |
| if ((RTL_R8(ChipCmd) & CmdReset) == 0) |
| break; |
| else |
| udelay(10); |
| |
| /* identify chip attached to board */ |
| tmp = RTL_R32(TxConfig); |
| tmp = ((tmp & 0x7c000000) + ((tmp & 0x00800000) << 2)) >> 24; |
| |
| for (i = ARRAY_SIZE(rtl_chip_info) - 1; i >= 0; i--){ |
| if (tmp == rtl_chip_info[i].version) { |
| tpc->chipset = i; |
| goto match; |
| } |
| } |
| |
| /* if unknown chip, assume array element #0, original RTL-8169 in this case */ |
| printf("PCI device %s: unknown chip version, assuming RTL-8169\n", |
| name); |
| printf("PCI device: TxConfig = 0x%lX\n", (unsigned long) RTL_R32(TxConfig)); |
| tpc->chipset = 0; |
| |
| match: |
| return 0; |
| } |
| |
| /* |
| * TX and RX descriptors are 16 bytes. This causes problems with the cache |
| * maintenance on CPUs where the cache-line size exceeds the size of these |
| * descriptors. What will happen is that when the driver receives a packet |
| * it will be immediately requeued for the hardware to reuse. The CPU will |
| * therefore need to flush the cache-line containing the descriptor, which |
| * will cause all other descriptors in the same cache-line to be flushed |
| * along with it. If one of those descriptors had been written to by the |
| * device those changes (and the associated packet) will be lost. |
| * |
| * To work around this, we make use of non-cached memory if available. If |
| * descriptors are mapped uncached there's no need to manually flush them |
| * or invalidate them. |
| * |
| * Note that this only applies to descriptors. The packet data buffers do |
| * not have the same constraints since they are 1536 bytes large, so they |
| * are unlikely to share cache-lines. |
| */ |
| static void *rtl_alloc_descs(unsigned int num) |
| { |
| size_t size = num * RTL8169_DESC_SIZE; |
| |
| #ifdef CONFIG_SYS_NONCACHED_MEMORY |
| return (void *)noncached_alloc(size, RTL8169_ALIGN); |
| #else |
| return memalign(RTL8169_ALIGN, size); |
| #endif |
| } |
| |
| /* |
| * Cache maintenance functions. These are simple wrappers around the more |
| * general purpose flush_cache() and invalidate_dcache_range() functions. |
| */ |
| |
| static void rtl_inval_rx_desc(struct RxDesc *desc) |
| { |
| #ifndef CONFIG_SYS_NONCACHED_MEMORY |
| unsigned long start = (unsigned long)desc & ~(ARCH_DMA_MINALIGN - 1); |
| unsigned long end = ALIGN(start + sizeof(*desc), ARCH_DMA_MINALIGN); |
| |
| invalidate_dcache_range(start, end); |
| #endif |
| } |
| |
| static void rtl_flush_rx_desc(struct RxDesc *desc) |
| { |
| #ifndef CONFIG_SYS_NONCACHED_MEMORY |
| flush_cache((unsigned long)desc, sizeof(*desc)); |
| #endif |
| } |
| |
| static void rtl_inval_tx_desc(struct TxDesc *desc) |
| { |
| #ifndef CONFIG_SYS_NONCACHED_MEMORY |
| unsigned long start = (unsigned long)desc & ~(ARCH_DMA_MINALIGN - 1); |
| unsigned long end = ALIGN(start + sizeof(*desc), ARCH_DMA_MINALIGN); |
| |
| invalidate_dcache_range(start, end); |
| #endif |
| } |
| |
| static void rtl_flush_tx_desc(struct TxDesc *desc) |
| { |
| #ifndef CONFIG_SYS_NONCACHED_MEMORY |
| flush_cache((unsigned long)desc, sizeof(*desc)); |
| #endif |
| } |
| |
| static void rtl_inval_buffer(void *buf, size_t size) |
| { |
| unsigned long start = (unsigned long)buf & ~(ARCH_DMA_MINALIGN - 1); |
| unsigned long end = ALIGN(start + size, ARCH_DMA_MINALIGN); |
| |
| invalidate_dcache_range(start, end); |
| } |
| |
| static void rtl_flush_buffer(void *buf, size_t size) |
| { |
| flush_cache((unsigned long)buf, size); |
| } |
| |
| /************************************************************************** |
| RECV - Receive a frame |
| ***************************************************************************/ |
| #ifdef CONFIG_DM_ETH |
| static int rtl_recv_common(struct udevice *dev, unsigned long dev_iobase, |
| uchar **packetp) |
| #else |
| static int rtl_recv_common(pci_dev_t dev, unsigned long dev_iobase, |
| uchar **packetp) |
| #endif |
| { |
| /* return true if there's an ethernet packet ready to read */ |
| /* nic->packet should contain data on return */ |
| /* nic->packetlen should contain length of data */ |
| int cur_rx; |
| int length = 0; |
| |
| #ifdef DEBUG_RTL8169_RX |
| printf ("%s\n", __FUNCTION__); |
| #endif |
| ioaddr = dev_iobase; |
| |
| cur_rx = tpc->cur_rx; |
| |
| rtl_inval_rx_desc(&tpc->RxDescArray[cur_rx]); |
| |
| if ((le32_to_cpu(tpc->RxDescArray[cur_rx].status) & OWNbit) == 0) { |
| if (!(le32_to_cpu(tpc->RxDescArray[cur_rx].status) & RxRES)) { |
| length = (int) (le32_to_cpu(tpc->RxDescArray[cur_rx]. |
| status) & 0x00001FFF) - 4; |
| |
| rtl_inval_buffer(tpc->RxBufferRing[cur_rx], length); |
| memcpy(rxdata, tpc->RxBufferRing[cur_rx], length); |
| |
| if (cur_rx == NUM_RX_DESC - 1) |
| tpc->RxDescArray[cur_rx].status = |
| cpu_to_le32((OWNbit | EORbit) + RX_BUF_SIZE); |
| else |
| tpc->RxDescArray[cur_rx].status = |
| cpu_to_le32(OWNbit + RX_BUF_SIZE); |
| #ifdef CONFIG_DM_ETH |
| tpc->RxDescArray[cur_rx].buf_addr = cpu_to_le32( |
| dm_pci_mem_to_phys(dev, |
| (pci_addr_t)(unsigned long) |
| tpc->RxBufferRing[cur_rx])); |
| #else |
| tpc->RxDescArray[cur_rx].buf_addr = cpu_to_le32( |
| pci_mem_to_phys(dev, (pci_addr_t)(unsigned long) |
| tpc->RxBufferRing[cur_rx])); |
| #endif |
| rtl_flush_rx_desc(&tpc->RxDescArray[cur_rx]); |
| #ifdef CONFIG_DM_ETH |
| *packetp = rxdata; |
| #else |
| net_process_received_packet(rxdata, length); |
| #endif |
| } else { |
| puts("Error Rx"); |
| length = -EIO; |
| } |
| cur_rx = (cur_rx + 1) % NUM_RX_DESC; |
| tpc->cur_rx = cur_rx; |
| return length; |
| |
| } else { |
| ushort sts = RTL_R8(IntrStatus); |
| RTL_W8(IntrStatus, sts & ~(TxErr | RxErr | SYSErr)); |
| udelay(100); /* wait */ |
| } |
| tpc->cur_rx = cur_rx; |
| return (0); /* initially as this is called to flush the input */ |
| } |
| |
| #ifdef CONFIG_DM_ETH |
| int rtl8169_eth_recv(struct udevice *dev, int flags, uchar **packetp) |
| { |
| struct rtl8169_private *priv = dev_get_priv(dev); |
| |
| return rtl_recv_common(dev, priv->iobase, packetp); |
| } |
| #else |
| static int rtl_recv(struct eth_device *dev) |
| { |
| return rtl_recv_common((pci_dev_t)(unsigned long)dev->priv, |
| dev->iobase, NULL); |
| } |
| #endif /* nCONFIG_DM_ETH */ |
| |
| #define HZ 1000 |
| /************************************************************************** |
| SEND - Transmit a frame |
| ***************************************************************************/ |
| #ifdef CONFIG_DM_ETH |
| static int rtl_send_common(struct udevice *dev, unsigned long dev_iobase, |
| void *packet, int length) |
| #else |
| static int rtl_send_common(pci_dev_t dev, unsigned long dev_iobase, |
| void *packet, int length) |
| #endif |
| { |
| /* send the packet to destination */ |
| |
| u32 to; |
| u8 *ptxb; |
| int entry = tpc->cur_tx % NUM_TX_DESC; |
| u32 len = length; |
| int ret; |
| |
| #ifdef DEBUG_RTL8169_TX |
| int stime = currticks(); |
| printf ("%s\n", __FUNCTION__); |
| printf("sending %d bytes\n", len); |
| #endif |
| |
| ioaddr = dev_iobase; |
| |
| /* point to the current txb incase multiple tx_rings are used */ |
| ptxb = tpc->Tx_skbuff[entry * MAX_ETH_FRAME_SIZE]; |
| memcpy(ptxb, (char *)packet, (int)length); |
| |
| while (len < ETH_ZLEN) |
| ptxb[len++] = '\0'; |
| |
| rtl_flush_buffer(ptxb, ALIGN(len, RTL8169_ALIGN)); |
| |
| tpc->TxDescArray[entry].buf_Haddr = 0; |
| #ifdef CONFIG_DM_ETH |
| tpc->TxDescArray[entry].buf_addr = cpu_to_le32( |
| dm_pci_mem_to_phys(dev, (pci_addr_t)(unsigned long)ptxb)); |
| #else |
| tpc->TxDescArray[entry].buf_addr = cpu_to_le32( |
| pci_mem_to_phys(dev, (pci_addr_t)(unsigned long)ptxb)); |
| #endif |
| if (entry != (NUM_TX_DESC - 1)) { |
| tpc->TxDescArray[entry].status = |
| cpu_to_le32((OWNbit | FSbit | LSbit) | |
| ((len > ETH_ZLEN) ? len : ETH_ZLEN)); |
| } else { |
| tpc->TxDescArray[entry].status = |
| cpu_to_le32((OWNbit | EORbit | FSbit | LSbit) | |
| ((len > ETH_ZLEN) ? len : ETH_ZLEN)); |
| } |
| rtl_flush_tx_desc(&tpc->TxDescArray[entry]); |
| RTL_W8(TxPoll, 0x40); /* set polling bit */ |
| |
| tpc->cur_tx++; |
| to = currticks() + TX_TIMEOUT; |
| do { |
| rtl_inval_tx_desc(&tpc->TxDescArray[entry]); |
| } while ((le32_to_cpu(tpc->TxDescArray[entry].status) & OWNbit) |
| && (currticks() < to)); /* wait */ |
| |
| if (currticks() >= to) { |
| #ifdef DEBUG_RTL8169_TX |
| puts("tx timeout/error\n"); |
| printf("%s elapsed time : %lu\n", __func__, currticks()-stime); |
| #endif |
| ret = -ETIMEDOUT; |
| } else { |
| #ifdef DEBUG_RTL8169_TX |
| puts("tx done\n"); |
| #endif |
| ret = 0; |
| } |
| /* Delay to make net console (nc) work properly */ |
| udelay(20); |
| return ret; |
| } |
| |
| #ifdef CONFIG_DM_ETH |
| int rtl8169_eth_send(struct udevice *dev, void *packet, int length) |
| { |
| struct rtl8169_private *priv = dev_get_priv(dev); |
| |
| return rtl_send_common(dev, priv->iobase, packet, length); |
| } |
| |
| #else |
| static int rtl_send(struct eth_device *dev, void *packet, int length) |
| { |
| return rtl_send_common((pci_dev_t)(unsigned long)dev->priv, |
| dev->iobase, packet, length); |
| } |
| #endif |
| |
| static void rtl8169_set_rx_mode(void) |
| { |
| u32 mc_filter[2]; /* Multicast hash filter */ |
| int rx_mode; |
| u32 tmp = 0; |
| |
| #ifdef DEBUG_RTL8169 |
| printf ("%s\n", __FUNCTION__); |
| #endif |
| |
| /* IFF_ALLMULTI */ |
| /* Too many to filter perfectly -- accept all multicasts. */ |
| rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys; |
| mc_filter[1] = mc_filter[0] = 0xffffffff; |
| |
| tmp = rtl8169_rx_config | rx_mode | (RTL_R32(RxConfig) & |
| rtl_chip_info[tpc->chipset].RxConfigMask); |
| |
| RTL_W32(RxConfig, tmp); |
| RTL_W32(MAR0 + 0, mc_filter[0]); |
| RTL_W32(MAR0 + 4, mc_filter[1]); |
| } |
| |
| #ifdef CONFIG_DM_ETH |
| static void rtl8169_hw_start(struct udevice *dev) |
| #else |
| static void rtl8169_hw_start(pci_dev_t dev) |
| #endif |
| { |
| u32 i; |
| |
| #ifdef DEBUG_RTL8169 |
| int stime = currticks(); |
| printf ("%s\n", __FUNCTION__); |
| #endif |
| |
| #if 0 |
| /* Soft reset the chip. */ |
| RTL_W8(ChipCmd, CmdReset); |
| |
| /* Check that the chip has finished the reset. */ |
| for (i = 1000; i > 0; i--) { |
| if ((RTL_R8(ChipCmd) & CmdReset) == 0) |
| break; |
| else |
| udelay(10); |
| } |
| #endif |
| |
| RTL_W8(Cfg9346, Cfg9346_Unlock); |
| |
| /* RTL-8169sb/8110sb or previous version */ |
| if (tpc->chipset <= 5) |
| RTL_W8(ChipCmd, CmdTxEnb | CmdRxEnb); |
| |
| RTL_W8(EarlyTxThres, EarlyTxThld); |
| |
| /* For gigabit rtl8169 */ |
| RTL_W16(RxMaxSize, RxPacketMaxSize); |
| |
| /* Set Rx Config register */ |
| i = rtl8169_rx_config | (RTL_R32(RxConfig) & |
| rtl_chip_info[tpc->chipset].RxConfigMask); |
| RTL_W32(RxConfig, i); |
| |
| /* Set DMA burst size and Interframe Gap Time */ |
| RTL_W32(TxConfig, (TX_DMA_BURST << TxDMAShift) | |
| (InterFrameGap << TxInterFrameGapShift)); |
| |
| |
| tpc->cur_rx = 0; |
| |
| #ifdef CONFIG_DM_ETH |
| RTL_W32(TxDescStartAddrLow, dm_pci_mem_to_phys(dev, |
| (pci_addr_t)(unsigned long)tpc->TxDescArray)); |
| #else |
| RTL_W32(TxDescStartAddrLow, pci_mem_to_phys(dev, |
| (pci_addr_t)(unsigned long)tpc->TxDescArray)); |
| #endif |
| RTL_W32(TxDescStartAddrHigh, (unsigned long)0); |
| #ifdef CONFIG_DM_ETH |
| RTL_W32(RxDescStartAddrLow, dm_pci_mem_to_phys( |
| dev, (pci_addr_t)(unsigned long)tpc->RxDescArray)); |
| #else |
| RTL_W32(RxDescStartAddrLow, pci_mem_to_phys( |
| dev, (pci_addr_t)(unsigned long)tpc->RxDescArray)); |
| #endif |
| RTL_W32(RxDescStartAddrHigh, (unsigned long)0); |
| |
| /* RTL-8169sc/8110sc or later version */ |
| if (tpc->chipset > 5) |
| RTL_W8(ChipCmd, CmdTxEnb | CmdRxEnb); |
| |
| RTL_W8(Cfg9346, Cfg9346_Lock); |
| udelay(10); |
| |
| RTL_W32(RxMissed, 0); |
| |
| rtl8169_set_rx_mode(); |
| |
| /* no early-rx interrupts */ |
| RTL_W16(MultiIntr, RTL_R16(MultiIntr) & 0xF000); |
| |
| #ifdef DEBUG_RTL8169 |
| printf("%s elapsed time : %lu\n", __func__, currticks()-stime); |
| #endif |
| } |
| |
| #ifdef CONFIG_DM_ETH |
| static void rtl8169_init_ring(struct udevice *dev) |
| #else |
| static void rtl8169_init_ring(pci_dev_t dev) |
| #endif |
| { |
| int i; |
| |
| #ifdef DEBUG_RTL8169 |
| int stime = currticks(); |
| printf ("%s\n", __FUNCTION__); |
| #endif |
| |
| tpc->cur_rx = 0; |
| tpc->cur_tx = 0; |
| tpc->dirty_tx = 0; |
| memset(tpc->TxDescArray, 0x0, NUM_TX_DESC * sizeof(struct TxDesc)); |
| memset(tpc->RxDescArray, 0x0, NUM_RX_DESC * sizeof(struct RxDesc)); |
| |
| for (i = 0; i < NUM_TX_DESC; i++) { |
| tpc->Tx_skbuff[i] = &txb[i]; |
| } |
| |
| for (i = 0; i < NUM_RX_DESC; i++) { |
| if (i == (NUM_RX_DESC - 1)) |
| tpc->RxDescArray[i].status = |
| cpu_to_le32((OWNbit | EORbit) + RX_BUF_SIZE); |
| else |
| tpc->RxDescArray[i].status = |
| cpu_to_le32(OWNbit + RX_BUF_SIZE); |
| |
| tpc->RxBufferRing[i] = &rxb[i * RX_BUF_SIZE]; |
| #ifdef CONFIG_DM_ETH |
| tpc->RxDescArray[i].buf_addr = cpu_to_le32(dm_pci_mem_to_phys( |
| dev, (pci_addr_t)(unsigned long)tpc->RxBufferRing[i])); |
| #else |
| tpc->RxDescArray[i].buf_addr = cpu_to_le32(pci_mem_to_phys( |
| dev, (pci_addr_t)(unsigned long)tpc->RxBufferRing[i])); |
| #endif |
| rtl_flush_rx_desc(&tpc->RxDescArray[i]); |
| } |
| |
| #ifdef DEBUG_RTL8169 |
| printf("%s elapsed time : %lu\n", __func__, currticks()-stime); |
| #endif |
| } |
| |
| #ifdef CONFIG_DM_ETH |
| static void rtl8169_common_start(struct udevice *dev, unsigned char *enetaddr, |
| unsigned long dev_iobase) |
| #else |
| static void rtl8169_common_start(pci_dev_t dev, unsigned char *enetaddr, |
| unsigned long dev_iobase) |
| #endif |
| { |
| int i; |
| |
| #ifdef DEBUG_RTL8169 |
| int stime = currticks(); |
| printf ("%s\n", __FUNCTION__); |
| #endif |
| |
| ioaddr = dev_iobase; |
| |
| rtl8169_init_ring(dev); |
| rtl8169_hw_start(dev); |
| /* Construct a perfect filter frame with the mac address as first match |
| * and broadcast for all others */ |
| for (i = 0; i < 192; i++) |
| txb[i] = 0xFF; |
| |
| txb[0] = enetaddr[0]; |
| txb[1] = enetaddr[1]; |
| txb[2] = enetaddr[2]; |
| txb[3] = enetaddr[3]; |
| txb[4] = enetaddr[4]; |
| txb[5] = enetaddr[5]; |
| |
| #ifdef DEBUG_RTL8169 |
| printf("%s elapsed time : %lu\n", __func__, currticks()-stime); |
| #endif |
| } |
| |
| #ifdef CONFIG_DM_ETH |
| static int rtl8169_eth_start(struct udevice *dev) |
| { |
| struct eth_pdata *plat = dev_get_platdata(dev); |
| struct rtl8169_private *priv = dev_get_priv(dev); |
| |
| rtl8169_common_start(dev, plat->enetaddr, priv->iobase); |
| |
| return 0; |
| } |
| #else |
| /************************************************************************** |
| RESET - Finish setting up the ethernet interface |
| ***************************************************************************/ |
| static int rtl_reset(struct eth_device *dev, bd_t *bis) |
| { |
| rtl8169_common_start((pci_dev_t)(unsigned long)dev->priv, |
| dev->enetaddr, dev->iobase); |
| |
| return 0; |
| } |
| #endif /* nCONFIG_DM_ETH */ |
| |
| static void rtl_halt_common(unsigned long dev_iobase) |
| { |
| int i; |
| |
| #ifdef DEBUG_RTL8169 |
| printf ("%s\n", __FUNCTION__); |
| #endif |
| |
| ioaddr = dev_iobase; |
| |
| /* Stop the chip's Tx and Rx DMA processes. */ |
| RTL_W8(ChipCmd, 0x00); |
| |
| /* Disable interrupts by clearing the interrupt mask. */ |
| RTL_W16(IntrMask, 0x0000); |
| |
| RTL_W32(RxMissed, 0); |
| |
| for (i = 0; i < NUM_RX_DESC; i++) { |
| tpc->RxBufferRing[i] = NULL; |
| } |
| } |
| |
| #ifdef CONFIG_DM_ETH |
| void rtl8169_eth_stop(struct udevice *dev) |
| { |
| struct rtl8169_private *priv = dev_get_priv(dev); |
| |
| rtl_halt_common(priv->iobase); |
| } |
| #else |
| /************************************************************************** |
| HALT - Turn off ethernet interface |
| ***************************************************************************/ |
| static void rtl_halt(struct eth_device *dev) |
| { |
| rtl_halt_common(dev->iobase); |
| } |
| #endif |
| |
| #ifdef CONFIG_DM_ETH |
| static int rtl8169_write_hwaddr(struct udevice *dev) |
| { |
| struct eth_pdata *plat = dev_get_platdata(dev); |
| unsigned int i; |
| |
| RTL_W8(Cfg9346, Cfg9346_Unlock); |
| |
| for (i = 0; i < MAC_ADDR_LEN; i++) |
| RTL_W8(MAC0 + i, plat->enetaddr[i]); |
| |
| RTL_W8(Cfg9346, Cfg9346_Lock); |
| |
| return 0; |
| } |
| #endif |
| |
| /************************************************************************** |
| INIT - Look for an adapter, this routine's visible to the outside |
| ***************************************************************************/ |
| |
| #define board_found 1 |
| #define valid_link 0 |
| static int rtl_init(unsigned long dev_ioaddr, const char *name, |
| unsigned char *enetaddr) |
| { |
| static int board_idx = -1; |
| int i, rc; |
| int option = -1, Cap10_100 = 0, Cap1000 = 0; |
| |
| #ifdef DEBUG_RTL8169 |
| printf ("%s\n", __FUNCTION__); |
| #endif |
| ioaddr = dev_ioaddr; |
| |
| board_idx++; |
| |
| /* point to private storage */ |
| tpc = &tpx; |
| |
| rc = rtl8169_init_board(ioaddr, name); |
| if (rc) |
| return rc; |
| |
| /* Get MAC address. FIXME: read EEPROM */ |
| for (i = 0; i < MAC_ADDR_LEN; i++) |
| enetaddr[i] = RTL_R8(MAC0 + i); |
| |
| #ifdef DEBUG_RTL8169 |
| printf("chipset = %d\n", tpc->chipset); |
| printf("MAC Address"); |
| for (i = 0; i < MAC_ADDR_LEN; i++) |
| printf(":%02x", enetaddr[i]); |
| putc('\n'); |
| #endif |
| |
| #ifdef DEBUG_RTL8169 |
| /* Print out some hardware info */ |
| printf("%s: at ioaddr 0x%lx\n", name, ioaddr); |
| #endif |
| |
| /* if TBI is not endbled */ |
| if (!(RTL_R8(PHYstatus) & TBI_Enable)) { |
| int val = mdio_read(PHY_AUTO_NEGO_REG); |
| |
| option = (board_idx >= MAX_UNITS) ? 0 : media[board_idx]; |
| /* Force RTL8169 in 10/100/1000 Full/Half mode. */ |
| if (option > 0) { |
| #ifdef DEBUG_RTL8169 |
| printf("%s: Force-mode Enabled.\n", name); |
| #endif |
| Cap10_100 = 0, Cap1000 = 0; |
| switch (option) { |
| case _10_Half: |
| Cap10_100 = PHY_Cap_10_Half; |
| Cap1000 = PHY_Cap_Null; |
| break; |
| case _10_Full: |
| Cap10_100 = PHY_Cap_10_Full; |
| Cap1000 = PHY_Cap_Null; |
| break; |
| case _100_Half: |
| Cap10_100 = PHY_Cap_100_Half; |
| Cap1000 = PHY_Cap_Null; |
| break; |
| case _100_Full: |
| Cap10_100 = PHY_Cap_100_Full; |
| Cap1000 = PHY_Cap_Null; |
| break; |
| case _1000_Full: |
| Cap10_100 = PHY_Cap_Null; |
| Cap1000 = PHY_Cap_1000_Full; |
| break; |
| default: |
| break; |
| } |
| mdio_write(PHY_AUTO_NEGO_REG, Cap10_100 | (val & 0x1F)); /* leave PHY_AUTO_NEGO_REG bit4:0 unchanged */ |
| mdio_write(PHY_1000_CTRL_REG, Cap1000); |
| } else { |
| #ifdef DEBUG_RTL8169 |
| printf("%s: Auto-negotiation Enabled.\n", |
| name); |
| #endif |
| /* enable 10/100 Full/Half Mode, leave PHY_AUTO_NEGO_REG bit4:0 unchanged */ |
| mdio_write(PHY_AUTO_NEGO_REG, |
| PHY_Cap_10_Half | PHY_Cap_10_Full | |
| PHY_Cap_100_Half | PHY_Cap_100_Full | |
| (val & 0x1F)); |
| |
| /* enable 1000 Full Mode */ |
| mdio_write(PHY_1000_CTRL_REG, PHY_Cap_1000_Full); |
| |
| } |
| |
| /* Enable auto-negotiation and restart auto-nigotiation */ |
| mdio_write(PHY_CTRL_REG, |
| PHY_Enable_Auto_Nego | PHY_Restart_Auto_Nego); |
| udelay(100); |
| |
| /* wait for auto-negotiation process */ |
| for (i = 10000; i > 0; i--) { |
| /* check if auto-negotiation complete */ |
| if (mdio_read(PHY_STAT_REG) & PHY_Auto_Nego_Comp) { |
| udelay(100); |
| option = RTL_R8(PHYstatus); |
| if (option & _1000bpsF) { |
| #ifdef DEBUG_RTL8169 |
| printf("%s: 1000Mbps Full-duplex operation.\n", |
| name); |
| #endif |
| } else { |
| #ifdef DEBUG_RTL8169 |
| printf("%s: %sMbps %s-duplex operation.\n", |
| name, |
| (option & _100bps) ? "100" : |
| "10", |
| (option & FullDup) ? "Full" : |
| "Half"); |
| #endif |
| } |
| break; |
| } else { |
| udelay(100); |
| } |
| } /* end for-loop to wait for auto-negotiation process */ |
| |
| } else { |
| udelay(100); |
| #ifdef DEBUG_RTL8169 |
| printf |
| ("%s: 1000Mbps Full-duplex operation, TBI Link %s!\n", |
| name, |
| (RTL_R32(TBICSR) & TBILinkOK) ? "OK" : "Failed"); |
| #endif |
| } |
| |
| |
| tpc->RxDescArray = rtl_alloc_descs(NUM_RX_DESC); |
| if (!tpc->RxDescArray) |
| return -ENOMEM; |
| |
| tpc->TxDescArray = rtl_alloc_descs(NUM_TX_DESC); |
| if (!tpc->TxDescArray) |
| return -ENOMEM; |
| |
| return 0; |
| } |
| |
| #ifndef CONFIG_DM_ETH |
| int rtl8169_initialize(bd_t *bis) |
| { |
| pci_dev_t devno; |
| int card_number = 0; |
| struct eth_device *dev; |
| u32 iobase; |
| int idx=0; |
| |
| while(1){ |
| unsigned int region; |
| u16 device; |
| int err; |
| |
| /* Find RTL8169 */ |
| if ((devno = pci_find_devices(supported, idx++)) < 0) |
| break; |
| |
| pci_read_config_word(devno, PCI_DEVICE_ID, &device); |
| switch (device) { |
| case 0x8168: |
| region = 2; |
| break; |
| |
| default: |
| region = 1; |
| break; |
| } |
| |
| pci_read_config_dword(devno, PCI_BASE_ADDRESS_0 + (region * 4), &iobase); |
| iobase &= ~0xf; |
| |
| debug ("rtl8169: REALTEK RTL8169 @0x%x\n", iobase); |
| |
| dev = (struct eth_device *)malloc(sizeof *dev); |
| if (!dev) { |
| printf("Can not allocate memory of rtl8169\n"); |
| break; |
| } |
| |
| memset(dev, 0, sizeof(*dev)); |
| sprintf (dev->name, "RTL8169#%d", card_number); |
| |
| dev->priv = (void *)(unsigned long)devno; |
| dev->iobase = (int)pci_mem_to_phys(devno, iobase); |
| |
| dev->init = rtl_reset; |
| dev->halt = rtl_halt; |
| dev->send = rtl_send; |
| dev->recv = rtl_recv; |
| |
| err = rtl_init(dev->iobase, dev->name, dev->enetaddr); |
| if (err < 0) { |
| printf(pr_fmt("failed to initialize card: %d\n"), err); |
| free(dev); |
| continue; |
| } |
| |
| eth_register (dev); |
| |
| card_number++; |
| } |
| return card_number; |
| } |
| #endif |
| |
| #ifdef CONFIG_DM_ETH |
| static int rtl8169_eth_probe(struct udevice *dev) |
| { |
| struct pci_child_platdata *pplat = dev_get_parent_platdata(dev); |
| struct rtl8169_private *priv = dev_get_priv(dev); |
| struct eth_pdata *plat = dev_get_platdata(dev); |
| u32 iobase; |
| int region; |
| int ret; |
| |
| debug("rtl8169: REALTEK RTL8169 @0x%x\n", iobase); |
| switch (pplat->device) { |
| case 0x8168: |
| region = 2; |
| break; |
| default: |
| region = 1; |
| break; |
| } |
| dm_pci_read_config32(dev, PCI_BASE_ADDRESS_0 + region * 4, &iobase); |
| iobase &= ~0xf; |
| priv->iobase = (int)dm_pci_mem_to_phys(dev, iobase); |
| |
| ret = rtl_init(priv->iobase, dev->name, plat->enetaddr); |
| if (ret < 0) { |
| printf(pr_fmt("failed to initialize card: %d\n"), ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static const struct eth_ops rtl8169_eth_ops = { |
| .start = rtl8169_eth_start, |
| .send = rtl8169_eth_send, |
| .recv = rtl8169_eth_recv, |
| .stop = rtl8169_eth_stop, |
| .write_hwaddr = rtl8169_write_hwaddr, |
| }; |
| |
| static const struct udevice_id rtl8169_eth_ids[] = { |
| { .compatible = "realtek,rtl8169" }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(eth_rtl8169) = { |
| .name = "eth_rtl8169", |
| .id = UCLASS_ETH, |
| .of_match = rtl8169_eth_ids, |
| .probe = rtl8169_eth_probe, |
| .ops = &rtl8169_eth_ops, |
| .priv_auto_alloc_size = sizeof(struct rtl8169_private), |
| .platdata_auto_alloc_size = sizeof(struct eth_pdata), |
| }; |
| |
| U_BOOT_PCI_DEVICE(eth_rtl8169, supported); |
| #endif |