drivers/input/tegra-kbc.c - filogic/uboot - Gitiles

 // SPDX-License-Identifier: GPL-2.0+
 /*
  *  (C) Copyright 2011
  *  NVIDIA Corporation <www.nvidia.com>
  */

 #include <common.h>
 #include <dm.h>
 #include <fdtdec.h>
 #include <input.h>
 #include <keyboard.h>
 #include <key_matrix.h>
 #include <log.h>
 #include <stdio_dev.h>
 #include <tegra-kbc.h>
 #include <asm/io.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/funcmux.h>
 #include <asm/arch-tegra/timer.h>
 #include <linux/input.h>

 enum {
 	KBC_MAX_GPIO		= 24,
 	KBC_MAX_KPENT		= 8,	/* size of keypress entry queue */
 };

 #define KBC_FIFO_TH_CNT_SHIFT		14
 #define KBC_DEBOUNCE_CNT_SHIFT		4
 #define KBC_CONTROL_FIFO_CNT_INT_EN	(1 << 3)
 #define KBC_CONTROL_KBC_EN		(1 << 0)
 #define KBC_INT_FIFO_CNT_INT_STATUS	(1 << 2)
 #define KBC_KPENT_VALID			(1 << 7)
 #define KBC_ST_STATUS			(1 << 3)

 enum {
 	KBC_DEBOUNCE_COUNT	= 2,
 	KBC_REPEAT_RATE_MS	= 30,
 	KBC_REPEAT_DELAY_MS	= 240,
 	KBC_CLOCK_KHZ		= 32,	/* Keyboard uses a 32KHz clock */
 };

 /* keyboard controller config and state */
 struct tegra_kbd_priv {
 	struct input_config *input;	/* The input layer */
 	struct key_matrix matrix;	/* The key matrix layer */

 	struct kbc_tegra *kbc;		/* tegra keyboard controller */
 	unsigned char inited;		/* 1 if keyboard has been inited */
 	unsigned char first_scan;	/* 1 if this is our first key scan */

 	/*
 	 * After init we must wait a short time before polling the keyboard.
 	 * This gives the tegra keyboard controller time to react after reset
 	 * and lets us grab keys pressed during reset.
 	 */
 	unsigned int init_dly_ms;	/* Delay before we can read keyboard */
 	unsigned int start_time_ms;	/* Time that we inited (in ms) */
 	unsigned int last_poll_ms;	/* Time we should last polled */
 	unsigned int next_repeat_ms;	/* Next time we repeat a key */
 };

 /**
  * reads the keyboard fifo for current keypresses
  *
  * @param priv		Keyboard private data
  * @param fifo		Place to put fifo results
  * @param max_keycodes	Maximum number of key codes to put in the fifo
  * @return number of items put into fifo
  */
 static int tegra_kbc_find_keys(struct tegra_kbd_priv *priv, int *fifo,
 			       int max_keycodes)
 {
 	struct key_matrix_key keys[KBC_MAX_KPENT], *key;
 	u32 kp_ent = 0;
 	int i;

 	for (key = keys, i = 0; i < KBC_MAX_KPENT; i++, key++) {
 		/* Get next word */
 		if (!(i & 3))
 			kp_ent = readl(&priv->kbc->kp_ent[i / 4]);

 		key->valid = (kp_ent & KBC_KPENT_VALID) != 0;
 		key->row = (kp_ent >> 3) & 0xf;
 		key->col = kp_ent & 0x7;

 		/* Shift to get next entry */
 		kp_ent >>= 8;
 	}
 	return key_matrix_decode(&priv->matrix, keys, KBC_MAX_KPENT, fifo,
 				 max_keycodes);
 }

 /**
  * Process all the keypress sequences in fifo and send key codes
  *
  * The fifo contains zero or more keypress sets. Each set
  * consists of from 1-8 keycodes, representing the keycodes which
  * were simultaneously pressed during that scan.
  *
  * This function works through each set and generates ASCII characters
  * for each. Not that one set may produce more than one ASCII characters -
  * for example holding down 'd' and 'f' at the same time will generate
  * two ASCII characters.
  *
  * Note: if fifo_cnt is 0, we will tell the input layer that no keys are
  * pressed.
  *
  * @param priv		Keyboard private data
  * @param fifo_cnt	Number of entries in the keyboard fifo
  */
 static void process_fifo(struct tegra_kbd_priv *priv, int fifo_cnt)
 {
 	int fifo[KBC_MAX_KPENT];
 	int cnt = 0;

 	/* Always call input_send_keycodes() at least once */
 	do {
 		if (fifo_cnt)
 			cnt = tegra_kbc_find_keys(priv, fifo, KBC_MAX_KPENT);

 		input_send_keycodes(priv->input, fifo, cnt);
 	} while (--fifo_cnt > 0);
 }

 /**
  * Check the keyboard controller and emit ASCII characters for any keys that
  * are pressed.
  *
  * @param priv		Keyboard private data
  */
 static void check_for_keys(struct tegra_kbd_priv *priv)
 {
 	int fifo_cnt;

 	if (!priv->first_scan &&
 	    get_timer(priv->last_poll_ms) < KBC_REPEAT_RATE_MS)
 		return;
 	priv->last_poll_ms = get_timer(0);
 	priv->first_scan = 0;

 	/*
 	 * Once we get here we know the keyboard has been scanned. So if there
 	 * scan waiting for us, we know that nothing is held down.
 	 */
 	fifo_cnt = (readl(&priv->kbc->interrupt) >> 4) & 0xf;
 	process_fifo(priv, fifo_cnt);
 }

 /**
  * In order to detect keys pressed on boot, wait for the hardware to
  * complete scanning the keys. This includes time to transition from
  * Wkup mode to Continous polling mode and the repoll time. We can
  * deduct the time that's already elapsed.
  *
  * @param priv		Keyboard private data
  */
 static void kbd_wait_for_fifo_init(struct tegra_kbd_priv *priv)
 {
 	if (!priv->inited) {
 		unsigned long elapsed_time;
 		long delay_ms;

 		elapsed_time = get_timer(priv->start_time_ms);
 		delay_ms = priv->init_dly_ms - elapsed_time;
 		if (delay_ms > 0) {
 			udelay(delay_ms * 1000);
 			debug("%s: delay %ldms\n", __func__, delay_ms);
 		}

 		priv->inited = 1;
 	}
 }

 /**
  * Check the tegra keyboard, and send any keys that are pressed.
  *
  * This is called by input_tstc() and input_getc() when they need more
  * characters
  *
  * @param input		Input configuration
  * @return 1, to indicate that we have something to look at
  */
 static int tegra_kbc_check(struct input_config *input)
 {
 	struct tegra_kbd_priv *priv = dev_get_priv(input->dev);

 	kbd_wait_for_fifo_init(priv);
 	check_for_keys(priv);

 	return 1;
 }

 /* configures keyboard GPIO registers to use the rows and columns */
 static void config_kbc_gpio(struct tegra_kbd_priv *priv, struct kbc_tegra *kbc)
 {
 	int i;

 	for (i = 0; i < KBC_MAX_GPIO; i++) {
 		u32 row_cfg, col_cfg;
 		u32 r_shift = 5 * (i % 6);
 		u32 c_shift = 4 * (i % 8);
 		u32 r_mask = 0x1f << r_shift;
 		u32 c_mask = 0xf << c_shift;
 		u32 r_offs = i / 6;
 		u32 c_offs = i / 8;

 		row_cfg = readl(&kbc->row_cfg[r_offs]);
 		col_cfg = readl(&kbc->col_cfg[c_offs]);

 		row_cfg &= ~r_mask;
 		col_cfg &= ~c_mask;

 		if (i < priv->matrix.num_rows) {
 			row_cfg |= ((i << 1) | 1) << r_shift;
 		} else {
 			col_cfg |= (((i - priv->matrix.num_rows) << 1) | 1)
 					<< c_shift;
 		}

 		writel(row_cfg, &kbc->row_cfg[r_offs]);
 		writel(col_cfg, &kbc->col_cfg[c_offs]);
 	}
 }

 /**
  * Start up the keyboard device
  */
 static void tegra_kbc_open(struct tegra_kbd_priv *priv)
 {
 	struct kbc_tegra *kbc = priv->kbc;
 	unsigned int scan_period;
 	u32 val;

 	/*
 	 * We will scan at twice the keyboard repeat rate, so that there is
 	 * always a scan ready when we check it in check_for_keys().
 	 */
 	scan_period = KBC_REPEAT_RATE_MS / 2;
 	writel(scan_period * KBC_CLOCK_KHZ, &kbc->rpt_dly);
 	writel(scan_period * KBC_CLOCK_KHZ, &kbc->init_dly);
 	/*
 	 * Before reading from the keyboard we must wait for the init_dly
 	 * plus the rpt_delay, plus 2ms for the row scan time.
 	 */
 	priv->init_dly_ms = scan_period * 2 + 2;

 	val = KBC_DEBOUNCE_COUNT << KBC_DEBOUNCE_CNT_SHIFT;
 	val |= 1 << KBC_FIFO_TH_CNT_SHIFT;	/* fifo interrupt threshold */
 	val |= KBC_CONTROL_KBC_EN;		/* enable */
 	writel(val, &kbc->control);

 	priv->start_time_ms = get_timer(0);
 	priv->last_poll_ms = get_timer(0);
 	priv->next_repeat_ms = priv->last_poll_ms;
 	priv->first_scan = 1;
 }

 static int tegra_kbd_start(struct udevice *dev)
 {
 	struct tegra_kbd_priv *priv = dev_get_priv(dev);

 	/* Set up pin mux and enable the clock */
 	funcmux_select(PERIPH_ID_KBC, FUNCMUX_DEFAULT);
 	clock_enable(PERIPH_ID_KBC);
 	config_kbc_gpio(priv, priv->kbc);

 	tegra_kbc_open(priv);
 	debug("%s: Tegra keyboard ready\n", __func__);

 	return 0;
 }

 /**
  * Set up the tegra keyboard. This is called by the stdio device handler
  *
  * We want to do this init when the keyboard is actually used rather than
  * at start-up, since keyboard input may not currently be selected.
  *
  * Once the keyboard starts there will be a period during which we must
  * wait for the keyboard to init. We do this only when a key is first
  * read - see kbd_wait_for_fifo_init().
  *
  * @return 0 if ok, -ve on error
  */
 static int tegra_kbd_probe(struct udevice *dev)
 {
 	struct tegra_kbd_priv *priv = dev_get_priv(dev);
 	struct keyboard_priv *uc_priv = dev_get_uclass_priv(dev);
 	struct stdio_dev *sdev = &uc_priv->sdev;
 	struct input_config *input = &uc_priv->input;
 	int ret;

 	priv->kbc = (struct kbc_tegra *)devfdt_get_addr(dev);
 	if ((fdt_addr_t)priv->kbc == FDT_ADDR_T_NONE) {
 		debug("%s: No keyboard register found\n", __func__);
 		return -EINVAL;
 	}
 	input_set_delays(input, KBC_REPEAT_DELAY_MS, KBC_REPEAT_RATE_MS);

 	/* Decode the keyboard matrix information (16 rows, 8 columns) */
 	ret = key_matrix_init(&priv->matrix, 16, 8, 1);
 	if (ret) {
 		debug("%s: Could not init key matrix: %d\n", __func__, ret);
 		return ret;
 	}
 	ret = key_matrix_decode_fdt(dev, &priv->matrix);
 	if (ret) {
 		debug("%s: Could not decode key matrix from fdt: %d\n",
 		      __func__, ret);
 		return ret;
 	}
 	input_add_tables(input, false);
 	if (priv->matrix.fn_keycode) {
 		ret = input_add_table(input, KEY_FN, -1,
 				      priv->matrix.fn_keycode,
 				      priv->matrix.key_count);
 		if (ret) {
 			debug("%s: input_add_table() failed\n", __func__);
 			return ret;
 		}
 	}

 	/* Register the device. init_tegra_keyboard() will be called soon */
 	priv->input = input;
 	input->dev = dev;
 	input->read_keys = tegra_kbc_check;
 	strcpy(sdev->name, "tegra-kbc");
 	ret = input_stdio_register(sdev);
 	if (ret) {
 		debug("%s: input_stdio_register() failed\n", __func__);
 		return ret;
 	}

 	return 0;
 }

 static const struct keyboard_ops tegra_kbd_ops = {
 	.start	= tegra_kbd_start,
 };

 static const struct udevice_id tegra_kbd_ids[] = {
 	{ .compatible = "nvidia,tegra20-kbc" },
 	{ }
 };

 U_BOOT_DRIVER(tegra_kbd) = {
 	.name	= "tegra_kbd",
 	.id	= UCLASS_KEYBOARD,
 	.of_match = tegra_kbd_ids,
 	.probe = tegra_kbd_probe,
 	.ops	= &tegra_kbd_ops,
 	.priv_auto_alloc_size = sizeof(struct tegra_kbd_priv),
 };
	// SPDX-License-Identifier: GPL-2.0+
	/*
	* (C) Copyright 2011
	* NVIDIA Corporation <www.nvidia.com>
	*/

	#include <common.h>
	#include <dm.h>
	#include <fdtdec.h>
	#include <input.h>
	#include <keyboard.h>
	#include <key_matrix.h>
	#include <log.h>
	#include <stdio_dev.h>
	#include <tegra-kbc.h>
	#include <asm/io.h>
	#include <asm/arch/clock.h>
	#include <asm/arch/funcmux.h>
	#include <asm/arch-tegra/timer.h>
	#include <linux/input.h>

	enum {
	KBC_MAX_GPIO = 24,
	KBC_MAX_KPENT = 8, /* size of keypress entry queue */
	};

	#define KBC_FIFO_TH_CNT_SHIFT 14
	#define KBC_DEBOUNCE_CNT_SHIFT 4
	#define KBC_CONTROL_FIFO_CNT_INT_EN (1 << 3)
	#define KBC_CONTROL_KBC_EN (1 << 0)
	#define KBC_INT_FIFO_CNT_INT_STATUS (1 << 2)
	#define KBC_KPENT_VALID (1 << 7)
	#define KBC_ST_STATUS (1 << 3)

	enum {
	KBC_DEBOUNCE_COUNT = 2,
	KBC_REPEAT_RATE_MS = 30,
	KBC_REPEAT_DELAY_MS = 240,
	KBC_CLOCK_KHZ = 32, /* Keyboard uses a 32KHz clock */
	};

	/* keyboard controller config and state */
	struct tegra_kbd_priv {
	struct input_config input; / The input layer */
	struct key_matrix matrix; /* The key matrix layer */

	struct kbc_tegra kbc; / tegra keyboard controller */
	unsigned char inited; /* 1 if keyboard has been inited */
	unsigned char first_scan; /* 1 if this is our first key scan */

	/*
	* After init we must wait a short time before polling the keyboard.
	* This gives the tegra keyboard controller time to react after reset
	* and lets us grab keys pressed during reset.
	*/
	unsigned int init_dly_ms; /* Delay before we can read keyboard */
	unsigned int start_time_ms; /* Time that we inited (in ms) */
	unsigned int last_poll_ms; /* Time we should last polled */
	unsigned int next_repeat_ms; /* Next time we repeat a key */
	};

	/**
	* reads the keyboard fifo for current keypresses
	*
	* @param priv Keyboard private data
	* @param fifo Place to put fifo results
	* @param max_keycodes Maximum number of key codes to put in the fifo
	* @return number of items put into fifo
	*/
	static int tegra_kbc_find_keys(struct tegra_kbd_priv priv, int fifo,
	int max_keycodes)
	{
	struct key_matrix_key keys[KBC_MAX_KPENT], *key;
	u32 kp_ent = 0;
	int i;

	for (key = keys, i = 0; i < KBC_MAX_KPENT; i++, key++) {
	/* Get next word */
	if (!(i & 3))
	kp_ent = readl(&priv->kbc->kp_ent[i / 4]);

	key->valid = (kp_ent & KBC_KPENT_VALID) != 0;
	key->row = (kp_ent >> 3) & 0xf;
	key->col = kp_ent & 0x7;

	/* Shift to get next entry */
	kp_ent >>= 8;
	}
	return key_matrix_decode(&priv->matrix, keys, KBC_MAX_KPENT, fifo,
	max_keycodes);
	}

	/**
	* Process all the keypress sequences in fifo and send key codes
	*
	* The fifo contains zero or more keypress sets. Each set
	* consists of from 1-8 keycodes, representing the keycodes which
	* were simultaneously pressed during that scan.
	*
	* This function works through each set and generates ASCII characters
	* for each. Not that one set may produce more than one ASCII characters -
	* for example holding down 'd' and 'f' at the same time will generate
	* two ASCII characters.
	*
	* Note: if fifo_cnt is 0, we will tell the input layer that no keys are
	* pressed.
	*
	* @param priv Keyboard private data
	* @param fifo_cnt Number of entries in the keyboard fifo
	*/
	static void process_fifo(struct tegra_kbd_priv *priv, int fifo_cnt)
	{
	int fifo[KBC_MAX_KPENT];
	int cnt = 0;

	/* Always call input_send_keycodes() at least once */
	do {
	if (fifo_cnt)
	cnt = tegra_kbc_find_keys(priv, fifo, KBC_MAX_KPENT);

	input_send_keycodes(priv->input, fifo, cnt);
	} while (--fifo_cnt > 0);
	}

	/**
	* Check the keyboard controller and emit ASCII characters for any keys that
	* are pressed.
	*
	* @param priv Keyboard private data
	*/
	static void check_for_keys(struct tegra_kbd_priv *priv)
	{
	int fifo_cnt;

	if (!priv->first_scan &&
	get_timer(priv->last_poll_ms) < KBC_REPEAT_RATE_MS)
	return;
	priv->last_poll_ms = get_timer(0);
	priv->first_scan = 0;

	/*
	* Once we get here we know the keyboard has been scanned. So if there
	* scan waiting for us, we know that nothing is held down.
	*/
	fifo_cnt = (readl(&priv->kbc->interrupt) >> 4) & 0xf;
	process_fifo(priv, fifo_cnt);
	}

	/**
	* In order to detect keys pressed on boot, wait for the hardware to
	* complete scanning the keys. This includes time to transition from
	* Wkup mode to Continous polling mode and the repoll time. We can
	* deduct the time that's already elapsed.
	*
	* @param priv Keyboard private data
	*/
	static void kbd_wait_for_fifo_init(struct tegra_kbd_priv *priv)
	{
	if (!priv->inited) {
	unsigned long elapsed_time;
	long delay_ms;

	elapsed_time = get_timer(priv->start_time_ms);
	delay_ms = priv->init_dly_ms - elapsed_time;
	if (delay_ms > 0) {
	udelay(delay_ms * 1000);
	debug("%s: delay %ldms\n", __func__, delay_ms);
	}

	priv->inited = 1;
	}
	}

	/**
	* Check the tegra keyboard, and send any keys that are pressed.
	*
	* This is called by input_tstc() and input_getc() when they need more
	* characters
	*
	* @param input Input configuration
	* @return 1, to indicate that we have something to look at
	*/
	static int tegra_kbc_check(struct input_config *input)
	{
	struct tegra_kbd_priv *priv = dev_get_priv(input->dev);

	kbd_wait_for_fifo_init(priv);
	check_for_keys(priv);

	return 1;
	}

	/* configures keyboard GPIO registers to use the rows and columns */
	static void config_kbc_gpio(struct tegra_kbd_priv priv, struct kbc_tegra kbc)
	{
	int i;

	for (i = 0; i < KBC_MAX_GPIO; i++) {
	u32 row_cfg, col_cfg;
	u32 r_shift = 5 * (i % 6);
	u32 c_shift = 4 * (i % 8);
	u32 r_mask = 0x1f << r_shift;
	u32 c_mask = 0xf << c_shift;
	u32 r_offs = i / 6;
	u32 c_offs = i / 8;

	row_cfg = readl(&kbc->row_cfg[r_offs]);
	col_cfg = readl(&kbc->col_cfg[c_offs]);

	row_cfg &= ~r_mask;
	col_cfg &= ~c_mask;

	if (i < priv->matrix.num_rows) {
	row_cfg \|= ((i << 1) \| 1) << r_shift;
	} else {
	col_cfg \|= (((i - priv->matrix.num_rows) << 1) \| 1)
	<< c_shift;
	}

	writel(row_cfg, &kbc->row_cfg[r_offs]);
	writel(col_cfg, &kbc->col_cfg[c_offs]);
	}
	}

	/**
	* Start up the keyboard device
	*/
	static void tegra_kbc_open(struct tegra_kbd_priv *priv)
	{
	struct kbc_tegra *kbc = priv->kbc;
	unsigned int scan_period;
	u32 val;

	/*
	* We will scan at twice the keyboard repeat rate, so that there is
	* always a scan ready when we check it in check_for_keys().
	*/
	scan_period = KBC_REPEAT_RATE_MS / 2;
	writel(scan_period * KBC_CLOCK_KHZ, &kbc->rpt_dly);
	writel(scan_period * KBC_CLOCK_KHZ, &kbc->init_dly);
	/*
	* Before reading from the keyboard we must wait for the init_dly
	* plus the rpt_delay, plus 2ms for the row scan time.
	*/
	priv->init_dly_ms = scan_period * 2 + 2;

	val = KBC_DEBOUNCE_COUNT << KBC_DEBOUNCE_CNT_SHIFT;
	val \|= 1 << KBC_FIFO_TH_CNT_SHIFT; /* fifo interrupt threshold */
	val \|= KBC_CONTROL_KBC_EN; /* enable */
	writel(val, &kbc->control);

	priv->start_time_ms = get_timer(0);
	priv->last_poll_ms = get_timer(0);
	priv->next_repeat_ms = priv->last_poll_ms;
	priv->first_scan = 1;
	}

	static int tegra_kbd_start(struct udevice *dev)
	{
	struct tegra_kbd_priv *priv = dev_get_priv(dev);

	/* Set up pin mux and enable the clock */
	funcmux_select(PERIPH_ID_KBC, FUNCMUX_DEFAULT);
	clock_enable(PERIPH_ID_KBC);
	config_kbc_gpio(priv, priv->kbc);

	tegra_kbc_open(priv);
	debug("%s: Tegra keyboard ready\n", __func__);

	return 0;
	}

	/**
	* Set up the tegra keyboard. This is called by the stdio device handler
	*
	* We want to do this init when the keyboard is actually used rather than
	* at start-up, since keyboard input may not currently be selected.
	*
	* Once the keyboard starts there will be a period during which we must
	* wait for the keyboard to init. We do this only when a key is first
	* read - see kbd_wait_for_fifo_init().
	*
	* @return 0 if ok, -ve on error
	*/
	static int tegra_kbd_probe(struct udevice *dev)
	{
	struct tegra_kbd_priv *priv = dev_get_priv(dev);
	struct keyboard_priv *uc_priv = dev_get_uclass_priv(dev);
	struct stdio_dev *sdev = &uc_priv->sdev;
	struct input_config *input = &uc_priv->input;
	int ret;

	priv->kbc = (struct kbc_tegra *)devfdt_get_addr(dev);
	if ((fdt_addr_t)priv->kbc == FDT_ADDR_T_NONE) {
	debug("%s: No keyboard register found\n", __func__);
	return -EINVAL;
	}
	input_set_delays(input, KBC_REPEAT_DELAY_MS, KBC_REPEAT_RATE_MS);

	/* Decode the keyboard matrix information (16 rows, 8 columns) */
	ret = key_matrix_init(&priv->matrix, 16, 8, 1);
	if (ret) {
	debug("%s: Could not init key matrix: %d\n", __func__, ret);
	return ret;
	}
	ret = key_matrix_decode_fdt(dev, &priv->matrix);
	if (ret) {
	debug("%s: Could not decode key matrix from fdt: %d\n",
	__func__, ret);
	return ret;
	}
	input_add_tables(input, false);
	if (priv->matrix.fn_keycode) {
	ret = input_add_table(input, KEY_FN, -1,
	priv->matrix.fn_keycode,
	priv->matrix.key_count);
	if (ret) {
	debug("%s: input_add_table() failed\n", __func__);
	return ret;
	}
	}

	/* Register the device. init_tegra_keyboard() will be called soon */
	priv->input = input;
	input->dev = dev;
	input->read_keys = tegra_kbc_check;
	strcpy(sdev->name, "tegra-kbc");
	ret = input_stdio_register(sdev);
	if (ret) {
	debug("%s: input_stdio_register() failed\n", __func__);
	return ret;
	}

	return 0;
	}

	static const struct keyboard_ops tegra_kbd_ops = {
	.start = tegra_kbd_start,
	};

	static const struct udevice_id tegra_kbd_ids[] = {
	{ .compatible = "nvidia,tegra20-kbc" },
	{ }
	};

	U_BOOT_DRIVER(tegra_kbd) = {
	.name = "tegra_kbd",
	.id = UCLASS_KEYBOARD,
	.of_match = tegra_kbd_ids,
	.probe = tegra_kbd_probe,
	.ops = &tegra_kbd_ops,
	.priv_auto_alloc_size = sizeof(struct tegra_kbd_priv),
	};