| // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| /* |
| * Copyright (C) 2021 Microchip Technology Inc. |
| * Padmarao Begari <padmarao.begari@microchip.com> |
| */ |
| |
| /dts-v1/; |
| |
| #include "microchip-mpfs.dtsi" |
| |
| /* Clock frequency (in Hz) of the rtcclk */ |
| #define RTCCLK_FREQ 1000000 |
| |
| / { |
| model = "Microchip PolarFire-SoC Icicle Kit"; |
| compatible = "microchip,mpfs-icicle-kit", "microchip,mpfs"; |
| |
| aliases { |
| serial1 = &uart1; |
| ethernet0 = &mac1; |
| }; |
| |
| chosen { |
| stdout-path = "serial1"; |
| }; |
| |
| cpus { |
| timebase-frequency = <RTCCLK_FREQ>; |
| }; |
| |
| reserved-memory { |
| ranges; |
| #size-cells = <2>; |
| #address-cells = <2>; |
| |
| fabricbuf0: fabricbuf@0 { |
| compatible = "shared-dma-pool"; |
| reg = <0x0 0xae000000 0x0 0x2000000>; |
| label = "fabricbuf0-ddr-c"; |
| }; |
| |
| fabricbuf1: fabricbuf@1 { |
| compatible = "shared-dma-pool"; |
| reg = <0x0 0xc0000000 0x0 0x8000000>; |
| label = "fabricbuf1-ddr-nc"; |
| }; |
| |
| fabricbuf2: fabricbuf@2 { |
| compatible = "shared-dma-pool"; |
| reg = <0x0 0xd8000000 0x0 0x8000000>; |
| label = "fabricbuf2-ddr-nc-wcb"; |
| }; |
| }; |
| |
| udmabuf0 { |
| compatible = "ikwzm,u-dma-buf"; |
| device-name = "udmabuf-ddr-c0"; |
| minor-number = <0>; |
| size = <0x0 0x2000000>; |
| memory-region = <&fabricbuf0>; |
| sync-mode = <3>; |
| }; |
| |
| udmabuf1 { |
| compatible = "ikwzm,u-dma-buf"; |
| device-name = "udmabuf-ddr-nc0"; |
| minor-number = <1>; |
| size = <0x0 0x8000000>; |
| memory-region = <&fabricbuf1>; |
| sync-mode = <3>; |
| }; |
| |
| udmabuf2 { |
| compatible = "ikwzm,u-dma-buf"; |
| device-name = "udmabuf-ddr-nc-wcb0"; |
| minor-number = <2>; |
| size = <0x0 0x8000000>; |
| memory-region = <&fabricbuf2>; |
| sync-mode = <3>; |
| }; |
| |
| ddrc_cache_lo: memory@80000000 { |
| device_type = "memory"; |
| reg = <0x0 0x80000000 0x0 0x2e000000>; |
| clocks = <&clkcfg CLK_DDRC>; |
| status = "okay"; |
| }; |
| |
| ddrc_cache_hi: memory@1000000000 { |
| device_type = "memory"; |
| reg = <0x10 0x0 0x0 0x40000000>; |
| clocks = <&clkcfg CLK_DDRC>; |
| status = "okay"; |
| }; |
| }; |
| |
| &uart1 { |
| status = "okay"; |
| }; |
| |
| &mmc { |
| status = "okay"; |
| |
| bus-width = <4>; |
| disable-wp; |
| cap-mmc-highspeed; |
| cap-sd-highspeed; |
| card-detect-delay = <200>; |
| mmc-ddr-1_8v; |
| mmc-hs200-1_8v; |
| sd-uhs-sdr12; |
| sd-uhs-sdr25; |
| sd-uhs-sdr50; |
| sd-uhs-sdr104; |
| }; |
| |
| &i2c1 { |
| status = "okay"; |
| clock-frequency = <100000>; |
| |
| pac193x: pac193x@10 { |
| compatible = "microchip,pac1934"; |
| reg = <0x10>; |
| samp-rate = <64>; |
| status = "okay"; |
| ch1: channel0 { |
| uohms-shunt-res = <10000>; |
| rail-name = "VDDREG"; |
| channel_enabled; |
| }; |
| ch2: channel1 { |
| uohms-shunt-res = <10000>; |
| rail-name = "VDDA25"; |
| channel_enabled; |
| }; |
| ch3: channel2 { |
| uohms-shunt-res = <10000>; |
| rail-name = "VDD25"; |
| channel_enabled; |
| }; |
| ch4: channel3 { |
| uohms-shunt-res = <10000>; |
| rail-name = "VDDA_REG"; |
| channel_enabled; |
| }; |
| }; |
| }; |
| |
| &mac1 { |
| status = "okay"; |
| phy-mode = "sgmii"; |
| phy-handle = <&phy1>; |
| phy1: ethernet-phy@9 { |
| reg = <9>; |
| ti,fifo-depth = <0x1>; |
| }; |
| }; |