| /* |
| * Freescale i.MX28 Boot setup |
| * |
| * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> |
| * on behalf of DENX Software Engineering GmbH |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <config.h> |
| #include <asm/io.h> |
| #include <asm/arch/imx-regs.h> |
| #include <asm/arch/sys_proto.h> |
| #include <asm/gpio.h> |
| |
| #include "mxs_init.h" |
| |
| /* |
| * This delay function is intended to be used only in early stage of boot, where |
| * clock are not set up yet. The timer used here is reset on every boot and |
| * takes a few seconds to roll. The boot doesn't take that long, so to keep the |
| * code simple, it doesn't take rolling into consideration. |
| */ |
| void early_delay(int delay) |
| { |
| struct mxs_digctl_regs *digctl_regs = |
| (struct mxs_digctl_regs *)MXS_DIGCTL_BASE; |
| |
| uint32_t st = readl(&digctl_regs->hw_digctl_microseconds); |
| st += delay; |
| while (st > readl(&digctl_regs->hw_digctl_microseconds)) |
| ; |
| } |
| |
| #define MUX_CONFIG_BOOTMODE_PAD (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL) |
| static const iomux_cfg_t iomux_boot[] = { |
| #if defined(CONFIG_MX23) |
| MX23_PAD_LCD_D00__GPIO_1_0 | MUX_CONFIG_BOOTMODE_PAD, |
| MX23_PAD_LCD_D01__GPIO_1_1 | MUX_CONFIG_BOOTMODE_PAD, |
| MX23_PAD_LCD_D02__GPIO_1_2 | MUX_CONFIG_BOOTMODE_PAD, |
| MX23_PAD_LCD_D03__GPIO_1_3 | MUX_CONFIG_BOOTMODE_PAD, |
| MX23_PAD_LCD_D04__GPIO_1_4 | MUX_CONFIG_BOOTMODE_PAD, |
| MX23_PAD_LCD_D05__GPIO_1_5 | MUX_CONFIG_BOOTMODE_PAD, |
| #elif defined(CONFIG_MX28) |
| MX28_PAD_LCD_D00__GPIO_1_0 | MUX_CONFIG_BOOTMODE_PAD, |
| MX28_PAD_LCD_D01__GPIO_1_1 | MUX_CONFIG_BOOTMODE_PAD, |
| MX28_PAD_LCD_D02__GPIO_1_2 | MUX_CONFIG_BOOTMODE_PAD, |
| MX28_PAD_LCD_D03__GPIO_1_3 | MUX_CONFIG_BOOTMODE_PAD, |
| MX28_PAD_LCD_D04__GPIO_1_4 | MUX_CONFIG_BOOTMODE_PAD, |
| MX28_PAD_LCD_D05__GPIO_1_5 | MUX_CONFIG_BOOTMODE_PAD, |
| #endif |
| }; |
| |
| static uint8_t mxs_get_bootmode_index(void) |
| { |
| uint8_t bootmode = 0; |
| int i; |
| uint8_t masked; |
| |
| /* Setup IOMUX of bootmode pads to GPIO */ |
| mxs_iomux_setup_multiple_pads(iomux_boot, ARRAY_SIZE(iomux_boot)); |
| |
| #if defined(CONFIG_MX23) |
| /* Setup bootmode pins as GPIO input */ |
| gpio_direction_input(MX23_PAD_LCD_D00__GPIO_1_0); |
| gpio_direction_input(MX23_PAD_LCD_D01__GPIO_1_1); |
| gpio_direction_input(MX23_PAD_LCD_D02__GPIO_1_2); |
| gpio_direction_input(MX23_PAD_LCD_D03__GPIO_1_3); |
| gpio_direction_input(MX23_PAD_LCD_D05__GPIO_1_5); |
| |
| /* Read bootmode pads */ |
| bootmode |= (gpio_get_value(MX23_PAD_LCD_D00__GPIO_1_0) ? 1 : 0) << 0; |
| bootmode |= (gpio_get_value(MX23_PAD_LCD_D01__GPIO_1_1) ? 1 : 0) << 1; |
| bootmode |= (gpio_get_value(MX23_PAD_LCD_D02__GPIO_1_2) ? 1 : 0) << 2; |
| bootmode |= (gpio_get_value(MX23_PAD_LCD_D03__GPIO_1_3) ? 1 : 0) << 3; |
| bootmode |= (gpio_get_value(MX23_PAD_LCD_D05__GPIO_1_5) ? 1 : 0) << 5; |
| #elif defined(CONFIG_MX28) |
| /* Setup bootmode pins as GPIO input */ |
| gpio_direction_input(MX28_PAD_LCD_D00__GPIO_1_0); |
| gpio_direction_input(MX28_PAD_LCD_D01__GPIO_1_1); |
| gpio_direction_input(MX28_PAD_LCD_D02__GPIO_1_2); |
| gpio_direction_input(MX28_PAD_LCD_D03__GPIO_1_3); |
| gpio_direction_input(MX28_PAD_LCD_D04__GPIO_1_4); |
| gpio_direction_input(MX28_PAD_LCD_D05__GPIO_1_5); |
| |
| /* Read bootmode pads */ |
| bootmode |= (gpio_get_value(MX28_PAD_LCD_D00__GPIO_1_0) ? 1 : 0) << 0; |
| bootmode |= (gpio_get_value(MX28_PAD_LCD_D01__GPIO_1_1) ? 1 : 0) << 1; |
| bootmode |= (gpio_get_value(MX28_PAD_LCD_D02__GPIO_1_2) ? 1 : 0) << 2; |
| bootmode |= (gpio_get_value(MX28_PAD_LCD_D03__GPIO_1_3) ? 1 : 0) << 3; |
| bootmode |= (gpio_get_value(MX28_PAD_LCD_D04__GPIO_1_4) ? 1 : 0) << 4; |
| bootmode |= (gpio_get_value(MX28_PAD_LCD_D05__GPIO_1_5) ? 1 : 0) << 5; |
| #endif |
| |
| for (i = 0; i < ARRAY_SIZE(mxs_boot_modes); i++) { |
| masked = bootmode & mxs_boot_modes[i].boot_mask; |
| if (masked == mxs_boot_modes[i].boot_pads) |
| break; |
| } |
| |
| return i; |
| } |
| |
| void mxs_common_spl_init(const uint32_t arg, const uint32_t *resptr, |
| const iomux_cfg_t *iomux_setup, |
| const unsigned int iomux_size) |
| { |
| struct mxs_spl_data *data = (struct mxs_spl_data *) |
| ((CONFIG_SYS_TEXT_BASE - sizeof(struct mxs_spl_data)) & ~0xf); |
| uint8_t bootmode = mxs_get_bootmode_index(); |
| |
| mxs_iomux_setup_multiple_pads(iomux_setup, iomux_size); |
| mxs_power_init(); |
| |
| mxs_mem_init(); |
| data->mem_dram_size = mxs_mem_get_size(); |
| |
| data->boot_mode_idx = bootmode; |
| |
| mxs_power_wait_pswitch(); |
| } |
| |
| /* Support aparatus */ |
| inline void board_init_f(unsigned long bootflag) |
| { |
| for (;;) |
| ; |
| } |
| |
| inline void board_init_r(gd_t *id, ulong dest_addr) |
| { |
| for (;;) |
| ; |
| } |