sunxi: add support for Allwinner H6 SoC
Allwinner H6 is a new SoC from Allwinner features USB3 and PCIe
interfaces.
This patch adds support for it.
The corresponding DTSI file, from Linux next-20180720, is also
introduced.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com>
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index 32a4679..558363b 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -82,6 +82,7 @@
config SUNXI_SRAM_ADDRESS
hex
default 0x10000 if MACH_SUN9I || MACH_SUN50I || MACH_SUN50I_H5
+ default 0x20000 if MACH_SUN50I_H6
default 0x0
---help---
Older Allwinner SoCs have their mask boot ROM mapped just below 4GB,
@@ -287,6 +288,14 @@
select FIT
select SPL_LOAD_FIT
+config MACH_SUN50I_H6
+ bool "sun50i (Allwinner H6)"
+ select ARM64
+ select SUPPORT_SPL
+ select FIT
+ select SPL_LOAD_FIT
+ select DRAM_SUN50I_H6
+
endchoice
# The sun8i SoCs share a lot, this helps to avoid a lot of "if A23 || A33"
@@ -380,6 +389,7 @@
default 360 if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || \
MACH_SUN8I_V3S
default 672 if MACH_SUN50I
+ default 744 if MACH_SUN50I_H6
---help---
Set the dram clock speed, valid range 240 - 480 (prior to sun9i),
must be a multiple of 24. For the sun9i (A80), the tested values
@@ -399,7 +409,7 @@
default 123 if MACH_SUN4I || MACH_SUN5I || MACH_SUN6I || MACH_SUN8I
default 127 if MACH_SUN7I
default 14779 if MACH_SUN8I_V3S
- default 3881979 if MACH_SUN8I_R40
+ default 3881979 if MACH_SUN8I_R40 || MACH_SUN50I_H6
default 4145117 if MACH_SUN9I
default 3881915 if MACH_SUN50I
---help---
@@ -411,6 +421,7 @@
default y if MACH_SUN8I_A23
default y if MACH_SUN8I_R40
default y if MACH_SUN50I
+ default y if MACH_SUN50I_H6
---help---
Select this to enable dram odt (on die termination).
@@ -501,6 +512,7 @@
default 816000000 if MACH_SUN50I || MACH_SUN50I_H5
default 1008000000 if MACH_SUN8I
default 1008000000 if MACH_SUN9I
+ default 888000000 if MACH_SUN50I_H6
config SYS_CONFIG_NAME
default "sun4i" if MACH_SUN4I
@@ -510,6 +522,7 @@
default "sun8i" if MACH_SUN8I
default "sun9i" if MACH_SUN9I
default "sun50i" if MACH_SUN50I
+ default "sun50i" if MACH_SUN50I_H6
config SYS_BOARD
default "sunxi"
@@ -715,6 +728,7 @@
depends on !MACH_SUN8I_V3S
depends on !MACH_SUN9I
depends on !MACH_SUN50I
+ depends on !MACH_SUN50I_H6
select VIDEO
imply VIDEO_DT_SIMPLEFB
default y
@@ -947,6 +961,7 @@
default 0x4fe00000 if MACH_SUN8I
default 0x2fe00000 if MACH_SUN9I
default 0x4fe00000 if MACH_SUN50I
+ default 0x4fe00000 if MACH_SUN50I_H6
config SPL_SPI_SUNXI
bool "Support for SPI Flash on Allwinner SoCs in SPL"