| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright 2007, 2010-2011 Freescale Semiconductor, Inc |
| * Copyright 2019-2020 NXP |
| * Andy Fleming |
| * |
| * Based vaguely on the pxa mmc code: |
| * (C) Copyright 2003 |
| * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net |
| */ |
| |
| #include <config.h> |
| #include <common.h> |
| #include <command.h> |
| #include <cpu_func.h> |
| #include <errno.h> |
| #include <hwconfig.h> |
| #include <mmc.h> |
| #include <part.h> |
| #include <malloc.h> |
| #include <fsl_esdhc.h> |
| #include <fdt_support.h> |
| #include <asm/cache.h> |
| #include <asm/io.h> |
| #include <dm.h> |
| #include <dm/device_compat.h> |
| #include <linux/bitops.h> |
| #include <linux/delay.h> |
| #include <linux/dma-mapping.h> |
| #include <sdhci.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| struct fsl_esdhc { |
| uint dsaddr; /* SDMA system address register */ |
| uint blkattr; /* Block attributes register */ |
| uint cmdarg; /* Command argument register */ |
| uint xfertyp; /* Transfer type register */ |
| uint cmdrsp0; /* Command response 0 register */ |
| uint cmdrsp1; /* Command response 1 register */ |
| uint cmdrsp2; /* Command response 2 register */ |
| uint cmdrsp3; /* Command response 3 register */ |
| uint datport; /* Buffer data port register */ |
| uint prsstat; /* Present state register */ |
| uint proctl; /* Protocol control register */ |
| uint sysctl; /* System Control Register */ |
| uint irqstat; /* Interrupt status register */ |
| uint irqstaten; /* Interrupt status enable register */ |
| uint irqsigen; /* Interrupt signal enable register */ |
| uint autoc12err; /* Auto CMD error status register */ |
| uint hostcapblt; /* Host controller capabilities register */ |
| uint wml; /* Watermark level register */ |
| char reserved1[8]; /* reserved */ |
| uint fevt; /* Force event register */ |
| uint admaes; /* ADMA error status register */ |
| uint adsaddrl; /* ADMA system address low register */ |
| uint adsaddrh; /* ADMA system address high register */ |
| char reserved2[156]; |
| uint hostver; /* Host controller version register */ |
| char reserved3[4]; /* reserved */ |
| uint dmaerraddr; /* DMA error address register */ |
| char reserved4[4]; /* reserved */ |
| uint dmaerrattr; /* DMA error attribute register */ |
| char reserved5[4]; /* reserved */ |
| uint hostcapblt2; /* Host controller capabilities register 2 */ |
| char reserved6[8]; /* reserved */ |
| uint tbctl; /* Tuning block control register */ |
| char reserved7[32]; /* reserved */ |
| uint sdclkctl; /* SD clock control register */ |
| uint sdtimingctl; /* SD timing control register */ |
| char reserved8[20]; /* reserved */ |
| uint dllcfg0; /* DLL config 0 register */ |
| char reserved9[12]; /* reserved */ |
| uint dllstat0; /* DLL status 0 register */ |
| char reserved10[664];/* reserved */ |
| uint esdhcctl; /* eSDHC control register */ |
| }; |
| |
| struct fsl_esdhc_plat { |
| struct mmc_config cfg; |
| struct mmc mmc; |
| }; |
| |
| /** |
| * struct fsl_esdhc_priv |
| * |
| * @esdhc_regs: registers of the sdhc controller |
| * @sdhc_clk: Current clk of the sdhc controller |
| * @bus_width: bus width, 1bit, 4bit or 8bit |
| * @cfg: mmc config |
| * @mmc: mmc |
| * Following is used when Driver Model is enabled for MMC |
| * @dev: pointer for the device |
| * @cd_gpio: gpio for card detection |
| * @wp_gpio: gpio for write protection |
| */ |
| struct fsl_esdhc_priv { |
| struct fsl_esdhc *esdhc_regs; |
| unsigned int sdhc_clk; |
| bool is_sdhc_per_clk; |
| unsigned int clock; |
| #if !CONFIG_IS_ENABLED(DM_MMC) |
| struct mmc *mmc; |
| #endif |
| struct udevice *dev; |
| struct sdhci_adma_desc *adma_desc_table; |
| dma_addr_t dma_addr; |
| }; |
| |
| /* Return the XFERTYP flags for a given command and data packet */ |
| static uint esdhc_xfertyp(struct mmc_cmd *cmd, struct mmc_data *data) |
| { |
| uint xfertyp = 0; |
| |
| if (data) { |
| xfertyp |= XFERTYP_DPSEL; |
| if (!IS_ENABLED(CONFIG_SYS_FSL_ESDHC_USE_PIO) && |
| cmd->cmdidx != MMC_CMD_SEND_TUNING_BLOCK && |
| cmd->cmdidx != MMC_CMD_SEND_TUNING_BLOCK_HS200) |
| xfertyp |= XFERTYP_DMAEN; |
| if (data->blocks > 1) { |
| xfertyp |= XFERTYP_MSBSEL; |
| xfertyp |= XFERTYP_BCEN; |
| if (IS_ENABLED(CONFIG_SYS_FSL_ERRATUM_ESDHC111)) |
| xfertyp |= XFERTYP_AC12EN; |
| } |
| |
| if (data->flags & MMC_DATA_READ) |
| xfertyp |= XFERTYP_DTDSEL; |
| } |
| |
| if (cmd->resp_type & MMC_RSP_CRC) |
| xfertyp |= XFERTYP_CCCEN; |
| if (cmd->resp_type & MMC_RSP_OPCODE) |
| xfertyp |= XFERTYP_CICEN; |
| if (cmd->resp_type & MMC_RSP_136) |
| xfertyp |= XFERTYP_RSPTYP_136; |
| else if (cmd->resp_type & MMC_RSP_BUSY) |
| xfertyp |= XFERTYP_RSPTYP_48_BUSY; |
| else if (cmd->resp_type & MMC_RSP_PRESENT) |
| xfertyp |= XFERTYP_RSPTYP_48; |
| |
| if (cmd->cmdidx == MMC_CMD_STOP_TRANSMISSION) |
| xfertyp |= XFERTYP_CMDTYP_ABORT; |
| |
| return XFERTYP_CMD(cmd->cmdidx) | xfertyp; |
| } |
| |
| /* |
| * PIO Read/Write Mode reduce the performace as DMA is not used in this mode. |
| */ |
| static void esdhc_pio_read_write(struct fsl_esdhc_priv *priv, |
| struct mmc_data *data) |
| { |
| struct fsl_esdhc *regs = priv->esdhc_regs; |
| uint blocks; |
| char *buffer; |
| uint databuf; |
| uint size; |
| uint irqstat; |
| ulong start; |
| |
| if (data->flags & MMC_DATA_READ) { |
| blocks = data->blocks; |
| buffer = data->dest; |
| while (blocks) { |
| start = get_timer(0); |
| size = data->blocksize; |
| irqstat = esdhc_read32(®s->irqstat); |
| while (!(esdhc_read32(®s->prsstat) & PRSSTAT_BREN)) { |
| if (get_timer(start) > PIO_TIMEOUT) { |
| printf("\nData Read Failed in PIO Mode."); |
| return; |
| } |
| } |
| while (size && (!(irqstat & IRQSTAT_TC))) { |
| udelay(100); /* Wait before last byte transfer complete */ |
| irqstat = esdhc_read32(®s->irqstat); |
| databuf = in_le32(®s->datport); |
| *((uint *)buffer) = databuf; |
| buffer += 4; |
| size -= 4; |
| } |
| blocks--; |
| } |
| } else { |
| blocks = data->blocks; |
| buffer = (char *)data->src; |
| while (blocks) { |
| start = get_timer(0); |
| size = data->blocksize; |
| irqstat = esdhc_read32(®s->irqstat); |
| while (!(esdhc_read32(®s->prsstat) & PRSSTAT_BWEN)) { |
| if (get_timer(start) > PIO_TIMEOUT) { |
| printf("\nData Write Failed in PIO Mode."); |
| return; |
| } |
| } |
| while (size && (!(irqstat & IRQSTAT_TC))) { |
| udelay(100); /* Wait before last byte transfer complete */ |
| databuf = *((uint *)buffer); |
| buffer += 4; |
| size -= 4; |
| irqstat = esdhc_read32(®s->irqstat); |
| out_le32(®s->datport, databuf); |
| } |
| blocks--; |
| } |
| } |
| } |
| |
| static void esdhc_setup_watermark_level(struct fsl_esdhc_priv *priv, |
| struct mmc_data *data) |
| { |
| struct fsl_esdhc *regs = priv->esdhc_regs; |
| uint wml_value = data->blocksize / 4; |
| |
| if (data->flags & MMC_DATA_READ) { |
| if (wml_value > WML_RD_WML_MAX) |
| wml_value = WML_RD_WML_MAX_VAL; |
| |
| esdhc_clrsetbits32(®s->wml, WML_RD_WML_MASK, wml_value); |
| } else { |
| if (wml_value > WML_WR_WML_MAX) |
| wml_value = WML_WR_WML_MAX_VAL; |
| |
| esdhc_clrsetbits32(®s->wml, WML_WR_WML_MASK, |
| wml_value << 16); |
| } |
| } |
| |
| static void esdhc_setup_dma(struct fsl_esdhc_priv *priv, struct mmc_data *data) |
| { |
| uint trans_bytes = data->blocksize * data->blocks; |
| struct fsl_esdhc *regs = priv->esdhc_regs; |
| phys_addr_t adma_addr; |
| void *buf; |
| |
| if (data->flags & MMC_DATA_WRITE) |
| buf = (void *)data->src; |
| else |
| buf = data->dest; |
| |
| priv->dma_addr = dma_map_single(buf, trans_bytes, |
| mmc_get_dma_dir(data)); |
| |
| if (IS_ENABLED(CONFIG_FSL_ESDHC_SUPPORT_ADMA2) && |
| priv->adma_desc_table) { |
| debug("Using ADMA2\n"); |
| /* prefer ADMA2 if it is available */ |
| sdhci_prepare_adma_table(priv->adma_desc_table, data, |
| priv->dma_addr); |
| |
| adma_addr = virt_to_phys(priv->adma_desc_table); |
| esdhc_write32(®s->adsaddrl, lower_32_bits(adma_addr)); |
| if (IS_ENABLED(CONFIG_DMA_ADDR_T_64BIT)) |
| esdhc_write32(®s->adsaddrh, upper_32_bits(adma_addr)); |
| esdhc_clrsetbits32(®s->proctl, PROCTL_DMAS_MASK, |
| PROCTL_DMAS_ADMA2); |
| } else { |
| debug("Using SDMA\n"); |
| if (upper_32_bits(priv->dma_addr)) |
| printf("Cannot use 64 bit addresses with SDMA\n"); |
| esdhc_write32(®s->dsaddr, lower_32_bits(priv->dma_addr)); |
| esdhc_clrsetbits32(®s->proctl, PROCTL_DMAS_MASK, |
| PROCTL_DMAS_SDMA); |
| } |
| |
| esdhc_write32(®s->blkattr, data->blocks << 16 | data->blocksize); |
| } |
| |
| static int esdhc_setup_data(struct fsl_esdhc_priv *priv, struct mmc *mmc, |
| struct mmc_data *data) |
| { |
| int timeout; |
| bool is_write = data->flags & MMC_DATA_WRITE; |
| struct fsl_esdhc *regs = priv->esdhc_regs; |
| |
| if (is_write && !(esdhc_read32(®s->prsstat) & PRSSTAT_WPSPL)) { |
| printf("Can not write to locked SD card.\n"); |
| return -EINVAL; |
| } |
| |
| if (IS_ENABLED(CONFIG_SYS_FSL_ESDHC_USE_PIO)) |
| esdhc_setup_watermark_level(priv, data); |
| else |
| esdhc_setup_dma(priv, data); |
| |
| /* Calculate the timeout period for data transactions */ |
| /* |
| * 1)Timeout period = (2^(timeout+13)) SD Clock cycles |
| * 2)Timeout period should be minimum 0.250sec as per SD Card spec |
| * So, Number of SD Clock cycles for 0.25sec should be minimum |
| * (SD Clock/sec * 0.25 sec) SD Clock cycles |
| * = (mmc->clock * 1/4) SD Clock cycles |
| * As 1) >= 2) |
| * => (2^(timeout+13)) >= mmc->clock * 1/4 |
| * Taking log2 both the sides |
| * => timeout + 13 >= log2(mmc->clock/4) |
| * Rounding up to next power of 2 |
| * => timeout + 13 = log2(mmc->clock/4) + 1 |
| * => timeout + 13 = fls(mmc->clock/4) |
| * |
| * However, the MMC spec "It is strongly recommended for hosts to |
| * implement more than 500ms timeout value even if the card |
| * indicates the 250ms maximum busy length." Even the previous |
| * value of 300ms is known to be insufficient for some cards. |
| * So, we use |
| * => timeout + 13 = fls(mmc->clock/2) |
| */ |
| timeout = fls(mmc->clock/2); |
| timeout -= 13; |
| |
| if (timeout > 14) |
| timeout = 14; |
| |
| if (timeout < 0) |
| timeout = 0; |
| |
| if (IS_ENABLED(CONFIG_SYS_FSL_ERRATUM_ESDHC_A001) && |
| (timeout == 4 || timeout == 8 || timeout == 12)) |
| timeout++; |
| |
| if (IS_ENABLED(ESDHCI_QUIRK_BROKEN_TIMEOUT_VALUE)) |
| timeout = 0xE; |
| |
| esdhc_clrsetbits32(®s->sysctl, SYSCTL_TIMEOUT_MASK, timeout << 16); |
| |
| return 0; |
| } |
| |
| /* |
| * Sends a command out on the bus. Takes the mmc pointer, |
| * a command pointer, and an optional data pointer. |
| */ |
| static int esdhc_send_cmd_common(struct fsl_esdhc_priv *priv, struct mmc *mmc, |
| struct mmc_cmd *cmd, struct mmc_data *data) |
| { |
| int err = 0; |
| uint xfertyp; |
| uint irqstat; |
| u32 flags = IRQSTAT_CC | IRQSTAT_CTOE; |
| struct fsl_esdhc *regs = priv->esdhc_regs; |
| unsigned long start; |
| |
| if (IS_ENABLED(CONFIG_SYS_FSL_ERRATUM_ESDHC111) && |
| cmd->cmdidx == MMC_CMD_STOP_TRANSMISSION) |
| return 0; |
| |
| esdhc_write32(®s->irqstat, -1); |
| |
| sync(); |
| |
| /* Wait for the bus to be idle */ |
| while ((esdhc_read32(®s->prsstat) & PRSSTAT_CICHB) || |
| (esdhc_read32(®s->prsstat) & PRSSTAT_CIDHB)) |
| ; |
| |
| while (esdhc_read32(®s->prsstat) & PRSSTAT_DLA) |
| ; |
| |
| /* Wait at least 8 SD clock cycles before the next command */ |
| /* |
| * Note: This is way more than 8 cycles, but 1ms seems to |
| * resolve timing issues with some cards |
| */ |
| udelay(1000); |
| |
| /* Set up for a data transfer if we have one */ |
| if (data) { |
| err = esdhc_setup_data(priv, mmc, data); |
| if(err) |
| return err; |
| } |
| |
| /* Figure out the transfer arguments */ |
| xfertyp = esdhc_xfertyp(cmd, data); |
| |
| /* Mask all irqs */ |
| esdhc_write32(®s->irqsigen, 0); |
| |
| /* Send the command */ |
| esdhc_write32(®s->cmdarg, cmd->cmdarg); |
| esdhc_write32(®s->xfertyp, xfertyp); |
| |
| if (cmd->cmdidx == MMC_CMD_SEND_TUNING_BLOCK || |
| cmd->cmdidx == MMC_CMD_SEND_TUNING_BLOCK_HS200) |
| flags = IRQSTAT_BRR; |
| |
| /* Wait for the command to complete */ |
| start = get_timer(0); |
| while (!(esdhc_read32(®s->irqstat) & flags)) { |
| if (get_timer(start) > 1000) { |
| err = -ETIMEDOUT; |
| goto out; |
| } |
| } |
| |
| irqstat = esdhc_read32(®s->irqstat); |
| |
| if (irqstat & CMD_ERR) { |
| err = -ECOMM; |
| goto out; |
| } |
| |
| if (irqstat & IRQSTAT_CTOE) { |
| err = -ETIMEDOUT; |
| goto out; |
| } |
| |
| /* Workaround for ESDHC errata ENGcm03648 */ |
| if (!data && (cmd->resp_type & MMC_RSP_BUSY)) { |
| int timeout = 6000; |
| |
| /* Poll on DATA0 line for cmd with busy signal for 600 ms */ |
| while (timeout > 0 && !(esdhc_read32(®s->prsstat) & |
| PRSSTAT_DAT0)) { |
| udelay(100); |
| timeout--; |
| } |
| |
| if (timeout <= 0) { |
| printf("Timeout waiting for DAT0 to go high!\n"); |
| err = -ETIMEDOUT; |
| goto out; |
| } |
| } |
| |
| /* Copy the response to the response buffer */ |
| if (cmd->resp_type & MMC_RSP_136) { |
| u32 cmdrsp3, cmdrsp2, cmdrsp1, cmdrsp0; |
| |
| cmdrsp3 = esdhc_read32(®s->cmdrsp3); |
| cmdrsp2 = esdhc_read32(®s->cmdrsp2); |
| cmdrsp1 = esdhc_read32(®s->cmdrsp1); |
| cmdrsp0 = esdhc_read32(®s->cmdrsp0); |
| cmd->response[0] = (cmdrsp3 << 8) | (cmdrsp2 >> 24); |
| cmd->response[1] = (cmdrsp2 << 8) | (cmdrsp1 >> 24); |
| cmd->response[2] = (cmdrsp1 << 8) | (cmdrsp0 >> 24); |
| cmd->response[3] = (cmdrsp0 << 8); |
| } else |
| cmd->response[0] = esdhc_read32(®s->cmdrsp0); |
| |
| /* Wait until all of the blocks are transferred */ |
| if (data) { |
| if (IS_ENABLED(CONFIG_SYS_FSL_ESDHC_USE_PIO)) { |
| esdhc_pio_read_write(priv, data); |
| } else { |
| flags = DATA_COMPLETE; |
| if (cmd->cmdidx == MMC_CMD_SEND_TUNING_BLOCK || |
| cmd->cmdidx == MMC_CMD_SEND_TUNING_BLOCK_HS200) |
| flags = IRQSTAT_BRR; |
| |
| do { |
| irqstat = esdhc_read32(®s->irqstat); |
| |
| if (irqstat & IRQSTAT_DTOE) { |
| err = -ETIMEDOUT; |
| goto out; |
| } |
| |
| if (irqstat & DATA_ERR) { |
| err = -ECOMM; |
| goto out; |
| } |
| } while ((irqstat & flags) != flags); |
| |
| /* |
| * Need invalidate the dcache here again to avoid any |
| * cache-fill during the DMA operations such as the |
| * speculative pre-fetching etc. |
| */ |
| dma_unmap_single(priv->dma_addr, |
| data->blocks * data->blocksize, |
| mmc_get_dma_dir(data)); |
| } |
| } |
| |
| out: |
| /* Reset CMD and DATA portions on error */ |
| if (err) { |
| esdhc_write32(®s->sysctl, esdhc_read32(®s->sysctl) | |
| SYSCTL_RSTC); |
| while (esdhc_read32(®s->sysctl) & SYSCTL_RSTC) |
| ; |
| |
| if (data) { |
| esdhc_write32(®s->sysctl, |
| esdhc_read32(®s->sysctl) | |
| SYSCTL_RSTD); |
| while ((esdhc_read32(®s->sysctl) & SYSCTL_RSTD)) |
| ; |
| } |
| } |
| |
| esdhc_write32(®s->irqstat, -1); |
| |
| return err; |
| } |
| |
| static void set_sysctl(struct fsl_esdhc_priv *priv, struct mmc *mmc, uint clock) |
| { |
| struct fsl_esdhc *regs = priv->esdhc_regs; |
| int div = 1; |
| int pre_div = 2; |
| unsigned int sdhc_clk = priv->sdhc_clk; |
| u32 time_out; |
| u32 value; |
| uint clk; |
| |
| if (clock < mmc->cfg->f_min) |
| clock = mmc->cfg->f_min; |
| |
| while (sdhc_clk / (16 * pre_div) > clock && pre_div < 256) |
| pre_div *= 2; |
| |
| while (sdhc_clk / (div * pre_div) > clock && div < 16) |
| div++; |
| |
| mmc->clock = sdhc_clk / pre_div / div; |
| priv->clock = mmc->clock; |
| |
| pre_div >>= 1; |
| div -= 1; |
| |
| clk = (pre_div << 8) | (div << 4); |
| |
| esdhc_clrbits32(®s->sysctl, SYSCTL_CKEN); |
| |
| esdhc_clrsetbits32(®s->sysctl, SYSCTL_CLOCK_MASK, clk); |
| |
| time_out = 20; |
| value = PRSSTAT_SDSTB; |
| while (!(esdhc_read32(®s->prsstat) & value)) { |
| if (time_out == 0) { |
| printf("fsl_esdhc: Internal clock never stabilised.\n"); |
| break; |
| } |
| time_out--; |
| mdelay(1); |
| } |
| |
| esdhc_setbits32(®s->sysctl, SYSCTL_PEREN | SYSCTL_CKEN); |
| } |
| |
| static void esdhc_clock_control(struct fsl_esdhc_priv *priv, bool enable) |
| { |
| struct fsl_esdhc *regs = priv->esdhc_regs; |
| u32 value; |
| u32 time_out; |
| |
| value = esdhc_read32(®s->sysctl); |
| |
| if (enable) |
| value |= SYSCTL_CKEN; |
| else |
| value &= ~SYSCTL_CKEN; |
| |
| esdhc_write32(®s->sysctl, value); |
| |
| time_out = 20; |
| value = PRSSTAT_SDSTB; |
| while (!(esdhc_read32(®s->prsstat) & value)) { |
| if (time_out == 0) { |
| printf("fsl_esdhc: Internal clock never stabilised.\n"); |
| break; |
| } |
| time_out--; |
| mdelay(1); |
| } |
| } |
| |
| static void esdhc_flush_async_fifo(struct fsl_esdhc_priv *priv) |
| { |
| struct fsl_esdhc *regs = priv->esdhc_regs; |
| u32 time_out; |
| |
| esdhc_setbits32(®s->esdhcctl, ESDHCCTL_FAF); |
| |
| time_out = 20; |
| while (esdhc_read32(®s->esdhcctl) & ESDHCCTL_FAF) { |
| if (time_out == 0) { |
| printf("fsl_esdhc: Flush asynchronous FIFO timeout.\n"); |
| break; |
| } |
| time_out--; |
| mdelay(1); |
| } |
| } |
| |
| static void esdhc_tuning_block_enable(struct fsl_esdhc_priv *priv, |
| bool en) |
| { |
| struct fsl_esdhc *regs = priv->esdhc_regs; |
| |
| esdhc_clock_control(priv, false); |
| esdhc_flush_async_fifo(priv); |
| if (en) |
| esdhc_setbits32(®s->tbctl, TBCTL_TB_EN); |
| else |
| esdhc_clrbits32(®s->tbctl, TBCTL_TB_EN); |
| esdhc_clock_control(priv, true); |
| } |
| |
| static void esdhc_exit_hs400(struct fsl_esdhc_priv *priv) |
| { |
| struct fsl_esdhc *regs = priv->esdhc_regs; |
| |
| esdhc_clrbits32(®s->sdtimingctl, FLW_CTL_BG); |
| esdhc_clrbits32(®s->sdclkctl, CMD_CLK_CTL); |
| |
| esdhc_clock_control(priv, false); |
| esdhc_clrbits32(®s->tbctl, HS400_MODE); |
| esdhc_clock_control(priv, true); |
| |
| esdhc_clrbits32(®s->dllcfg0, DLL_FREQ_SEL | DLL_ENABLE); |
| esdhc_clrbits32(®s->tbctl, HS400_WNDW_ADJUST); |
| |
| esdhc_tuning_block_enable(priv, false); |
| } |
| |
| static int esdhc_set_timing(struct fsl_esdhc_priv *priv, enum bus_mode mode) |
| { |
| struct fsl_esdhc *regs = priv->esdhc_regs; |
| ulong start; |
| u32 val; |
| |
| /* Exit HS400 mode before setting any other mode */ |
| if (esdhc_read32(®s->tbctl) & HS400_MODE && |
| mode != MMC_HS_400) |
| esdhc_exit_hs400(priv); |
| |
| esdhc_clock_control(priv, false); |
| |
| if (mode == MMC_HS_200) |
| esdhc_clrsetbits32(®s->autoc12err, UHSM_MASK, |
| UHSM_SDR104_HS200); |
| if (mode == MMC_HS_400) { |
| esdhc_setbits32(®s->tbctl, HS400_MODE); |
| esdhc_setbits32(®s->sdclkctl, CMD_CLK_CTL); |
| esdhc_clock_control(priv, true); |
| |
| if (priv->clock == 200000000) |
| esdhc_setbits32(®s->dllcfg0, DLL_FREQ_SEL); |
| |
| esdhc_setbits32(®s->dllcfg0, DLL_ENABLE); |
| |
| esdhc_setbits32(®s->dllcfg0, DLL_RESET); |
| udelay(1); |
| esdhc_clrbits32(®s->dllcfg0, DLL_RESET); |
| |
| start = get_timer(0); |
| val = DLL_STS_SLV_LOCK; |
| while (!(esdhc_read32(®s->dllstat0) & val)) { |
| if (get_timer(start) > 1000) { |
| printf("fsl_esdhc: delay chain lock timeout\n"); |
| return -ETIMEDOUT; |
| } |
| } |
| |
| esdhc_setbits32(®s->tbctl, HS400_WNDW_ADJUST); |
| |
| esdhc_clock_control(priv, false); |
| esdhc_flush_async_fifo(priv); |
| } |
| esdhc_clock_control(priv, true); |
| return 0; |
| } |
| |
| static int esdhc_set_ios_common(struct fsl_esdhc_priv *priv, struct mmc *mmc) |
| { |
| struct fsl_esdhc *regs = priv->esdhc_regs; |
| int ret; |
| |
| if (priv->is_sdhc_per_clk) { |
| /* Select to use peripheral clock */ |
| esdhc_clock_control(priv, false); |
| esdhc_setbits32(®s->esdhcctl, ESDHCCTL_PCS); |
| esdhc_clock_control(priv, true); |
| } |
| |
| if (mmc->selected_mode == MMC_HS_400) |
| esdhc_tuning_block_enable(priv, true); |
| |
| /* Set the clock speed */ |
| if (priv->clock != mmc->clock) |
| set_sysctl(priv, mmc, mmc->clock); |
| |
| /* Set timing */ |
| ret = esdhc_set_timing(priv, mmc->selected_mode); |
| if (ret) |
| return ret; |
| |
| /* Set the bus width */ |
| esdhc_clrbits32(®s->proctl, PROCTL_DTW_4 | PROCTL_DTW_8); |
| |
| if (mmc->bus_width == 4) |
| esdhc_setbits32(®s->proctl, PROCTL_DTW_4); |
| else if (mmc->bus_width == 8) |
| esdhc_setbits32(®s->proctl, PROCTL_DTW_8); |
| |
| return 0; |
| } |
| |
| static void esdhc_enable_cache_snooping(struct fsl_esdhc *regs) |
| { |
| #ifdef CONFIG_ARCH_MPC830X |
| immap_t *immr = (immap_t *)CONFIG_SYS_IMMR; |
| sysconf83xx_t *sysconf = &immr->sysconf; |
| |
| setbits_be32(&sysconf->sdhccr, 0x02000000); |
| #else |
| esdhc_write32(®s->esdhcctl, 0x00000040); |
| #endif |
| } |
| |
| static int esdhc_init_common(struct fsl_esdhc_priv *priv, struct mmc *mmc) |
| { |
| struct fsl_esdhc *regs = priv->esdhc_regs; |
| ulong start; |
| |
| /* Reset the entire host controller */ |
| esdhc_setbits32(®s->sysctl, SYSCTL_RSTA); |
| |
| /* Wait until the controller is available */ |
| start = get_timer(0); |
| while ((esdhc_read32(®s->sysctl) & SYSCTL_RSTA)) { |
| if (get_timer(start) > 1000) |
| return -ETIMEDOUT; |
| } |
| |
| /* Clean TBCTL[TB_EN] which is not able to be reset by reset all */ |
| esdhc_clrbits32(®s->tbctl, TBCTL_TB_EN); |
| |
| esdhc_enable_cache_snooping(regs); |
| |
| esdhc_setbits32(®s->sysctl, SYSCTL_HCKEN | SYSCTL_IPGEN); |
| |
| /* Set the initial clock speed */ |
| set_sysctl(priv, mmc, 400000); |
| |
| /* Disable the BRR and BWR bits in IRQSTAT */ |
| esdhc_clrbits32(®s->irqstaten, IRQSTATEN_BRR | IRQSTATEN_BWR); |
| |
| /* Put the PROCTL reg back to the default */ |
| esdhc_write32(®s->proctl, PROCTL_INIT); |
| |
| /* Set timout to the maximum value */ |
| esdhc_clrsetbits32(®s->sysctl, SYSCTL_TIMEOUT_MASK, 14 << 16); |
| |
| return 0; |
| } |
| |
| static int esdhc_getcd_common(struct fsl_esdhc_priv *priv) |
| { |
| struct fsl_esdhc *regs = priv->esdhc_regs; |
| |
| #ifdef CONFIG_ESDHC_DETECT_QUIRK |
| if (CONFIG_ESDHC_DETECT_QUIRK) |
| return 1; |
| #endif |
| if (esdhc_read32(®s->prsstat) & PRSSTAT_CINS) |
| return 1; |
| |
| return 0; |
| } |
| |
| static void fsl_esdhc_get_cfg_common(struct fsl_esdhc_priv *priv, |
| struct mmc_config *cfg) |
| { |
| struct fsl_esdhc *regs = priv->esdhc_regs; |
| u32 caps; |
| |
| caps = esdhc_read32(®s->hostcapblt); |
| if (IS_ENABLED(CONFIG_SYS_FSL_ERRATUM_ESDHC135)) |
| caps &= ~(HOSTCAPBLT_SRS | HOSTCAPBLT_VS18 | HOSTCAPBLT_VS30); |
| if (IS_ENABLED(CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33)) |
| caps |= HOSTCAPBLT_VS33; |
| if (caps & HOSTCAPBLT_VS18) |
| cfg->voltages |= MMC_VDD_165_195; |
| if (caps & HOSTCAPBLT_VS30) |
| cfg->voltages |= MMC_VDD_29_30 | MMC_VDD_30_31; |
| if (caps & HOSTCAPBLT_VS33) |
| cfg->voltages |= MMC_VDD_32_33 | MMC_VDD_33_34; |
| |
| cfg->name = "FSL_SDHC"; |
| |
| if (caps & HOSTCAPBLT_HSS) |
| cfg->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS; |
| |
| cfg->f_min = 400000; |
| cfg->f_max = min(priv->sdhc_clk, (u32)200000000); |
| cfg->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT; |
| } |
| |
| #ifdef CONFIG_OF_LIBFDT |
| __weak int esdhc_status_fixup(void *blob, const char *compat) |
| { |
| if (IS_ENABLED(CONFIG_FSL_ESDHC_PIN_MUX) && !hwconfig("esdhc")) { |
| do_fixup_by_compat(blob, compat, "status", "disabled", |
| sizeof("disabled"), 1); |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| |
| #if CONFIG_IS_ENABLED(DM_MMC) |
| static int fsl_esdhc_get_cd(struct udevice *dev); |
| static void esdhc_disable_for_no_card(void *blob) |
| { |
| struct udevice *dev; |
| |
| for (uclass_first_device(UCLASS_MMC, &dev); |
| dev; |
| uclass_next_device(&dev)) { |
| char esdhc_path[50]; |
| |
| if (fsl_esdhc_get_cd(dev)) |
| continue; |
| |
| snprintf(esdhc_path, sizeof(esdhc_path), "/soc/esdhc@%lx", |
| (unsigned long)dev_read_addr(dev)); |
| do_fixup_by_path(blob, esdhc_path, "status", "disabled", |
| sizeof("disabled"), 1); |
| } |
| } |
| #else |
| static void esdhc_disable_for_no_card(void *blob) |
| { |
| } |
| #endif |
| |
| void fdt_fixup_esdhc(void *blob, struct bd_info *bd) |
| { |
| const char *compat = "fsl,esdhc"; |
| |
| if (esdhc_status_fixup(blob, compat)) |
| return; |
| |
| if (IS_ENABLED(CONFIG_FSL_ESDHC_33V_IO_RELIABILITY_WORKAROUND)) |
| esdhc_disable_for_no_card(blob); |
| |
| do_fixup_by_compat_u32(blob, compat, "clock-frequency", |
| gd->arch.sdhc_clk, 1); |
| } |
| #endif |
| |
| #if !CONFIG_IS_ENABLED(DM_MMC) |
| static int esdhc_getcd(struct mmc *mmc) |
| { |
| struct fsl_esdhc_priv *priv = mmc->priv; |
| |
| return esdhc_getcd_common(priv); |
| } |
| |
| static int esdhc_init(struct mmc *mmc) |
| { |
| struct fsl_esdhc_priv *priv = mmc->priv; |
| |
| return esdhc_init_common(priv, mmc); |
| } |
| |
| static int esdhc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, |
| struct mmc_data *data) |
| { |
| struct fsl_esdhc_priv *priv = mmc->priv; |
| |
| return esdhc_send_cmd_common(priv, mmc, cmd, data); |
| } |
| |
| static int esdhc_set_ios(struct mmc *mmc) |
| { |
| struct fsl_esdhc_priv *priv = mmc->priv; |
| |
| return esdhc_set_ios_common(priv, mmc); |
| } |
| |
| static const struct mmc_ops esdhc_ops = { |
| .getcd = esdhc_getcd, |
| .init = esdhc_init, |
| .send_cmd = esdhc_send_cmd, |
| .set_ios = esdhc_set_ios, |
| }; |
| |
| int fsl_esdhc_initialize(struct bd_info *bis, struct fsl_esdhc_cfg *cfg) |
| { |
| struct fsl_esdhc_plat *plat; |
| struct fsl_esdhc_priv *priv; |
| struct mmc_config *mmc_cfg; |
| struct mmc *mmc; |
| |
| if (!cfg) |
| return -EINVAL; |
| |
| priv = calloc(sizeof(struct fsl_esdhc_priv), 1); |
| if (!priv) |
| return -ENOMEM; |
| plat = calloc(sizeof(struct fsl_esdhc_plat), 1); |
| if (!plat) { |
| free(priv); |
| return -ENOMEM; |
| } |
| |
| priv->esdhc_regs = (struct fsl_esdhc *)(unsigned long)(cfg->esdhc_base); |
| priv->sdhc_clk = cfg->sdhc_clk; |
| if (gd->arch.sdhc_per_clk) |
| priv->is_sdhc_per_clk = true; |
| |
| mmc_cfg = &plat->cfg; |
| |
| if (cfg->max_bus_width == 8) { |
| mmc_cfg->host_caps |= MMC_MODE_1BIT | MMC_MODE_4BIT | |
| MMC_MODE_8BIT; |
| } else if (cfg->max_bus_width == 4) { |
| mmc_cfg->host_caps |= MMC_MODE_1BIT | MMC_MODE_4BIT; |
| } else if (cfg->max_bus_width == 1) { |
| mmc_cfg->host_caps |= MMC_MODE_1BIT; |
| } else { |
| mmc_cfg->host_caps |= MMC_MODE_1BIT | MMC_MODE_4BIT | |
| MMC_MODE_8BIT; |
| printf("No max bus width provided. Assume 8-bit supported.\n"); |
| } |
| |
| if (IS_ENABLED(CONFIG_ESDHC_DETECT_8_BIT_QUIRK)) |
| mmc_cfg->host_caps &= ~MMC_MODE_8BIT; |
| |
| mmc_cfg->ops = &esdhc_ops; |
| |
| fsl_esdhc_get_cfg_common(priv, mmc_cfg); |
| |
| mmc = mmc_create(mmc_cfg, priv); |
| if (!mmc) |
| return -EIO; |
| |
| priv->mmc = mmc; |
| return 0; |
| } |
| |
| int fsl_esdhc_mmc_init(struct bd_info *bis) |
| { |
| struct fsl_esdhc_cfg *cfg; |
| |
| cfg = calloc(sizeof(struct fsl_esdhc_cfg), 1); |
| cfg->esdhc_base = CONFIG_SYS_FSL_ESDHC_ADDR; |
| /* Prefer peripheral clock which provides higher frequency. */ |
| if (gd->arch.sdhc_per_clk) |
| cfg->sdhc_clk = gd->arch.sdhc_per_clk; |
| else |
| cfg->sdhc_clk = gd->arch.sdhc_clk; |
| return fsl_esdhc_initialize(bis, cfg); |
| } |
| #else /* DM_MMC */ |
| static int fsl_esdhc_probe(struct udevice *dev) |
| { |
| struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev); |
| struct fsl_esdhc_plat *plat = dev_get_platdata(dev); |
| struct fsl_esdhc_priv *priv = dev_get_priv(dev); |
| u32 caps, hostver; |
| fdt_addr_t addr; |
| struct mmc *mmc; |
| int ret; |
| |
| addr = dev_read_addr(dev); |
| if (addr == FDT_ADDR_T_NONE) |
| return -EINVAL; |
| #ifdef CONFIG_PPC |
| priv->esdhc_regs = (struct fsl_esdhc *)lower_32_bits(addr); |
| #else |
| priv->esdhc_regs = (struct fsl_esdhc *)addr; |
| #endif |
| priv->dev = dev; |
| |
| if (IS_ENABLED(CONFIG_FSL_ESDHC_SUPPORT_ADMA2)) { |
| /* |
| * Only newer eSDHC controllers can do ADMA2 if the ADMA flag |
| * is set in the host capabilities register. |
| */ |
| caps = esdhc_read32(&priv->esdhc_regs->hostcapblt); |
| hostver = esdhc_read32(&priv->esdhc_regs->hostver); |
| if (caps & HOSTCAPBLT_DMAS && |
| HOSTVER_VENDOR(hostver) > VENDOR_V_22) { |
| priv->adma_desc_table = sdhci_adma_init(); |
| if (!priv->adma_desc_table) |
| debug("Could not allocate ADMA tables, falling back to SDMA\n"); |
| } |
| } |
| |
| if (gd->arch.sdhc_per_clk) { |
| priv->sdhc_clk = gd->arch.sdhc_per_clk; |
| priv->is_sdhc_per_clk = true; |
| } else { |
| priv->sdhc_clk = gd->arch.sdhc_clk; |
| } |
| |
| if (priv->sdhc_clk <= 0) { |
| dev_err(dev, "Unable to get clk for %s\n", dev->name); |
| return -EINVAL; |
| } |
| |
| fsl_esdhc_get_cfg_common(priv, &plat->cfg); |
| |
| mmc_of_parse(dev, &plat->cfg); |
| |
| mmc = &plat->mmc; |
| mmc->cfg = &plat->cfg; |
| mmc->dev = dev; |
| |
| upriv->mmc = mmc; |
| |
| ret = esdhc_init_common(priv, mmc); |
| if (ret) |
| return ret; |
| |
| if (IS_ENABLED(CONFIG_FSL_ESDHC_33V_IO_RELIABILITY_WORKAROUND) && |
| !fsl_esdhc_get_cd(dev)) |
| esdhc_setbits32(&priv->esdhc_regs->proctl, PROCTL_VOLT_SEL); |
| |
| return 0; |
| } |
| |
| static int fsl_esdhc_get_cd(struct udevice *dev) |
| { |
| struct fsl_esdhc_plat *plat = dev_get_platdata(dev); |
| struct fsl_esdhc_priv *priv = dev_get_priv(dev); |
| |
| if (plat->cfg.host_caps & MMC_CAP_NONREMOVABLE) |
| return 1; |
| |
| return esdhc_getcd_common(priv); |
| } |
| |
| static int fsl_esdhc_send_cmd(struct udevice *dev, struct mmc_cmd *cmd, |
| struct mmc_data *data) |
| { |
| struct fsl_esdhc_plat *plat = dev_get_platdata(dev); |
| struct fsl_esdhc_priv *priv = dev_get_priv(dev); |
| |
| return esdhc_send_cmd_common(priv, &plat->mmc, cmd, data); |
| } |
| |
| static int fsl_esdhc_set_ios(struct udevice *dev) |
| { |
| struct fsl_esdhc_plat *plat = dev_get_platdata(dev); |
| struct fsl_esdhc_priv *priv = dev_get_priv(dev); |
| |
| return esdhc_set_ios_common(priv, &plat->mmc); |
| } |
| |
| static int fsl_esdhc_reinit(struct udevice *dev) |
| { |
| struct fsl_esdhc_plat *plat = dev_get_platdata(dev); |
| struct fsl_esdhc_priv *priv = dev_get_priv(dev); |
| |
| return esdhc_init_common(priv, &plat->mmc); |
| } |
| |
| #ifdef MMC_SUPPORTS_TUNING |
| static int fsl_esdhc_execute_tuning(struct udevice *dev, uint32_t opcode) |
| { |
| struct fsl_esdhc_plat *plat = dev_get_platdata(dev); |
| struct fsl_esdhc_priv *priv = dev_get_priv(dev); |
| struct fsl_esdhc *regs = priv->esdhc_regs; |
| u32 val, irqstaten; |
| int i; |
| |
| esdhc_tuning_block_enable(priv, true); |
| esdhc_setbits32(®s->autoc12err, EXECUTE_TUNING); |
| |
| irqstaten = esdhc_read32(®s->irqstaten); |
| esdhc_write32(®s->irqstaten, IRQSTATEN_BRR); |
| |
| for (i = 0; i < MAX_TUNING_LOOP; i++) { |
| mmc_send_tuning(&plat->mmc, opcode, NULL); |
| mdelay(1); |
| |
| val = esdhc_read32(®s->autoc12err); |
| if (!(val & EXECUTE_TUNING)) { |
| if (val & SMPCLKSEL) |
| break; |
| } |
| } |
| |
| esdhc_write32(®s->irqstaten, irqstaten); |
| |
| if (i != MAX_TUNING_LOOP) { |
| if (plat->mmc.hs400_tuning) |
| esdhc_setbits32(®s->sdtimingctl, FLW_CTL_BG); |
| return 0; |
| } |
| |
| printf("fsl_esdhc: tuning failed!\n"); |
| esdhc_clrbits32(®s->autoc12err, SMPCLKSEL); |
| esdhc_clrbits32(®s->autoc12err, EXECUTE_TUNING); |
| esdhc_tuning_block_enable(priv, false); |
| return -ETIMEDOUT; |
| } |
| #endif |
| |
| int fsl_esdhc_hs400_prepare_ddr(struct udevice *dev) |
| { |
| struct fsl_esdhc_priv *priv = dev_get_priv(dev); |
| |
| esdhc_tuning_block_enable(priv, false); |
| return 0; |
| } |
| |
| static const struct dm_mmc_ops fsl_esdhc_ops = { |
| .get_cd = fsl_esdhc_get_cd, |
| .send_cmd = fsl_esdhc_send_cmd, |
| .set_ios = fsl_esdhc_set_ios, |
| #ifdef MMC_SUPPORTS_TUNING |
| .execute_tuning = fsl_esdhc_execute_tuning, |
| #endif |
| .reinit = fsl_esdhc_reinit, |
| .hs400_prepare_ddr = fsl_esdhc_hs400_prepare_ddr, |
| }; |
| |
| static const struct udevice_id fsl_esdhc_ids[] = { |
| { .compatible = "fsl,esdhc", }, |
| { /* sentinel */ } |
| }; |
| |
| static int fsl_esdhc_bind(struct udevice *dev) |
| { |
| struct fsl_esdhc_plat *plat = dev_get_platdata(dev); |
| |
| return mmc_bind(dev, &plat->mmc, &plat->cfg); |
| } |
| |
| U_BOOT_DRIVER(fsl_esdhc) = { |
| .name = "fsl-esdhc-mmc", |
| .id = UCLASS_MMC, |
| .of_match = fsl_esdhc_ids, |
| .ops = &fsl_esdhc_ops, |
| .bind = fsl_esdhc_bind, |
| .probe = fsl_esdhc_probe, |
| .platdata_auto_alloc_size = sizeof(struct fsl_esdhc_plat), |
| .priv_auto_alloc_size = sizeof(struct fsl_esdhc_priv), |
| }; |
| #endif |