| /* |
| * Common APIs for EXYNOS based board |
| * |
| * Copyright (C) 2013 Samsung Electronics |
| * Rajeshwari Shinde <rajeshwari.s@samsung.com> |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <asm/arch/system.h> |
| |
| #define DMC_OFFSET 0x10000 |
| |
| /* |
| * Memory initialization |
| * |
| * @param reset Reset PHY during initialization. |
| */ |
| void mem_ctrl_init(int reset); |
| |
| /* System Clock initialization */ |
| void system_clock_init(void); |
| |
| /* |
| * Init subsystems according to the reset status |
| * |
| * @return 0 for a normal boot, non-zero for a resume |
| */ |
| int do_lowlevel_init(void); |
| |
| void sdelay(unsigned long); |
| |
| enum l2_cache_params { |
| CACHE_DATA_RAM_LATENCY_2_CYCLES = (2 << 0), |
| CACHE_DATA_RAM_LATENCY_3_CYCLES = (3 << 0), |
| CACHE_DISABLE_CLEAN_EVICT = (1 << 3), |
| CACHE_DATA_RAM_SETUP = (1 << 5), |
| CACHE_TAG_RAM_LATENCY_2_CYCLES = (2 << 6), |
| CACHE_TAG_RAM_LATENCY_3_CYCLES = (3 << 6), |
| CACHE_ENABLE_HAZARD_DETECT = (1 << 7), |
| CACHE_TAG_RAM_SETUP = (1 << 9), |
| CACHE_ECC_AND_PARITY = (1 << 21), |
| CACHE_ENABLE_FORCE_L2_LOGIC = (1 << 27) |
| }; |
| |
| |
| #ifndef CONFIG_SYS_L2CACHE_OFF |
| /* |
| * Configure L2CTLR to get timings that keep us from hanging/crashing. |
| * |
| * Must be inline here since low_power_start() is called without a |
| * stack (!). |
| */ |
| static inline void configure_l2_ctlr(void) |
| { |
| uint32_t val; |
| |
| mrc_l2_ctlr(val); |
| |
| val |= CACHE_TAG_RAM_SETUP | |
| CACHE_DATA_RAM_SETUP | |
| CACHE_TAG_RAM_LATENCY_2_CYCLES | |
| CACHE_DATA_RAM_LATENCY_2_CYCLES; |
| |
| if (proid_is_exynos5420() || proid_is_exynos5800()) { |
| val |= CACHE_ECC_AND_PARITY | |
| CACHE_TAG_RAM_LATENCY_3_CYCLES | |
| CACHE_DATA_RAM_LATENCY_3_CYCLES; |
| } |
| |
| mcr_l2_ctlr(val); |
| } |
| |
| /* |
| * Configure L2ACTLR. |
| * |
| * Must be inline here since low_power_start() is called without a |
| * stack (!). |
| */ |
| static inline void configure_l2_actlr(void) |
| { |
| uint32_t val; |
| |
| if (proid_is_exynos5420() || proid_is_exynos5800()) { |
| mrc_l2_aux_ctlr(val); |
| val |= CACHE_ENABLE_FORCE_L2_LOGIC | |
| CACHE_DISABLE_CLEAN_EVICT; |
| mcr_l2_aux_ctlr(val); |
| } |
| } |
| #endif |