| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. |
| */ |
| |
| /* |
| * CPU specific code for the MPC83xx family. |
| * |
| * Derived from the MPC8260 and MPC85xx. |
| */ |
| |
| #include <common.h> |
| #include <vsprintf.h> |
| #include <watchdog.h> |
| #include <command.h> |
| #include <mpc83xx.h> |
| #include <asm/processor.h> |
| #include <linux/libfdt.h> |
| #include <tsec.h> |
| #include <netdev.h> |
| #include <fsl_esdhc.h> |
| #if defined(CONFIG_BOOTCOUNT_LIMIT) && !defined(CONFIG_ARCH_MPC831X) |
| #include <linux/immap_qe.h> |
| #include <asm/io.h> |
| #endif |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| #ifndef CONFIG_CPU_MPC83XX |
| int checkcpu(void) |
| { |
| volatile immap_t *immr; |
| ulong clock = gd->cpu_clk; |
| u32 pvr = get_pvr(); |
| u32 spridr; |
| char buf[32]; |
| int ret; |
| int i; |
| |
| const struct cpu_type { |
| char name[15]; |
| u32 partid; |
| } cpu_type_list [] = { |
| CPU_TYPE_ENTRY(8308), |
| CPU_TYPE_ENTRY(8309), |
| CPU_TYPE_ENTRY(8311), |
| CPU_TYPE_ENTRY(8313), |
| CPU_TYPE_ENTRY(8314), |
| CPU_TYPE_ENTRY(8315), |
| CPU_TYPE_ENTRY(8321), |
| CPU_TYPE_ENTRY(8323), |
| CPU_TYPE_ENTRY(8343), |
| CPU_TYPE_ENTRY(8347_TBGA_), |
| CPU_TYPE_ENTRY(8347_PBGA_), |
| CPU_TYPE_ENTRY(8349), |
| CPU_TYPE_ENTRY(8358_TBGA_), |
| CPU_TYPE_ENTRY(8358_PBGA_), |
| CPU_TYPE_ENTRY(8360), |
| CPU_TYPE_ENTRY(8377), |
| CPU_TYPE_ENTRY(8378), |
| CPU_TYPE_ENTRY(8379), |
| }; |
| |
| immr = (immap_t *)CONFIG_SYS_IMMR; |
| |
| ret = prt_83xx_rsr(); |
| if (ret) |
| return ret; |
| |
| puts("CPU: "); |
| |
| switch (pvr & 0xffff0000) { |
| case PVR_E300C1: |
| printf("e300c1, "); |
| break; |
| |
| case PVR_E300C2: |
| printf("e300c2, "); |
| break; |
| |
| case PVR_E300C3: |
| printf("e300c3, "); |
| break; |
| |
| case PVR_E300C4: |
| printf("e300c4, "); |
| break; |
| |
| default: |
| printf("Unknown core, "); |
| } |
| |
| spridr = immr->sysconf.spridr; |
| |
| for (i = 0; i < ARRAY_SIZE(cpu_type_list); i++) |
| if (cpu_type_list[i].partid == PARTID_NO_E(spridr)) { |
| puts("MPC"); |
| puts(cpu_type_list[i].name); |
| if (IS_E_PROCESSOR(spridr)) |
| puts("E"); |
| if ((SPR_FAMILY(spridr) == SPR_834X_FAMILY || |
| SPR_FAMILY(spridr) == SPR_836X_FAMILY) && |
| REVID_MAJOR(spridr) >= 2) |
| puts("A"); |
| printf(", Rev: %d.%d", REVID_MAJOR(spridr), |
| REVID_MINOR(spridr)); |
| break; |
| } |
| |
| if (i == ARRAY_SIZE(cpu_type_list)) |
| printf("(SPRIDR %08x unknown), ", spridr); |
| |
| printf(" at %s MHz, ", strmhz(buf, clock)); |
| |
| printf("CSB: %s MHz\n", strmhz(buf, gd->arch.csb_clk)); |
| |
| return 0; |
| } |
| #endif |
| |
| #ifndef CONFIG_SYSRESET |
| int |
| do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) |
| { |
| ulong msr; |
| #ifndef MPC83xx_RESET |
| ulong addr; |
| #endif |
| |
| volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; |
| |
| puts("Resetting the board.\n"); |
| |
| #ifdef MPC83xx_RESET |
| |
| /* Interrupts and MMU off */ |
| msr = mfmsr(); |
| msr &= ~(MSR_EE | MSR_IR | MSR_DR); |
| mtmsr(msr); |
| |
| /* enable Reset Control Reg */ |
| immap->reset.rpr = 0x52535445; |
| sync(); |
| isync(); |
| |
| /* confirm Reset Control Reg is enabled */ |
| while(!((immap->reset.rcer) & RCER_CRE)) |
| ; |
| |
| udelay(200); |
| |
| /* perform reset, only one bit */ |
| immap->reset.rcr = RCR_SWHR; |
| |
| #else /* ! MPC83xx_RESET */ |
| |
| immap->reset.rmr = RMR_CSRE; /* Checkstop Reset enable */ |
| |
| /* Interrupts and MMU off */ |
| msr = mfmsr(); |
| msr &= ~(MSR_ME | MSR_EE | MSR_IR | MSR_DR); |
| mtmsr(msr); |
| |
| /* |
| * Trying to execute the next instruction at a non-existing address |
| * should cause a machine check, resulting in reset |
| */ |
| addr = CONFIG_SYS_RESET_ADDRESS; |
| |
| ((void (*)(void)) addr) (); |
| #endif /* MPC83xx_RESET */ |
| |
| return 1; |
| } |
| #endif |
| |
| /* |
| * Get timebase clock frequency (like cpu_clk in Hz) |
| */ |
| #ifndef CONFIG_TIMER |
| unsigned long get_tbclk(void) |
| { |
| return (gd->bus_clk + 3L) / 4L; |
| } |
| #endif |
| |
| #if defined(CONFIG_WATCHDOG) |
| void watchdog_reset (void) |
| { |
| int re_enable = disable_interrupts(); |
| |
| /* Reset the 83xx watchdog */ |
| volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; |
| immr->wdt.swsrr = 0x556c; |
| immr->wdt.swsrr = 0xaa39; |
| |
| if (re_enable) |
| enable_interrupts (); |
| } |
| #endif |
| |
| #ifndef CONFIG_DM_ETH |
| /* |
| * Initializes on-chip ethernet controllers. |
| * to override, implement board_eth_init() |
| */ |
| int cpu_eth_init(bd_t *bis) |
| { |
| #if defined(CONFIG_UEC_ETH) |
| uec_standard_init(bis); |
| #endif |
| |
| #if defined(CONFIG_TSEC_ENET) |
| tsec_standard_init(bis); |
| #endif |
| return 0; |
| } |
| #endif /* !CONFIG_DM_ETH */ |
| |
| /* |
| * Initializes on-chip MMC controllers. |
| * to override, implement board_mmc_init() |
| */ |
| int cpu_mmc_init(bd_t *bis) |
| { |
| #ifdef CONFIG_FSL_ESDHC |
| return fsl_esdhc_mmc_init(bis); |
| #else |
| return 0; |
| #endif |
| } |
| |
| void ppcDWstore(unsigned int *addr, unsigned int *value) |
| { |
| asm("lfd 1, 0(%1)\n\t" |
| "stfd 1, 0(%0)" |
| : |
| : "r" (addr), "r" (value) |
| : "memory"); |
| } |
| |
| void ppcDWload(unsigned int *addr, unsigned int *ret) |
| { |
| asm("lfd 1, 0(%0)\n\t" |
| "stfd 1, 0(%1)" |
| : |
| : "r" (addr), "r" (ret) |
| : "memory"); |
| } |