arch/arm/mach-rockchip/spl-boot-order.c - filogic/uboot - Gitiles

 // SPDX-License-Identifier: GPL-2.0+
 /*
  * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH
  */

 #include <common.h>
 #include <dm.h>
 #include <fdt_support.h>
 #include <log.h>
 #include <mmc.h>
 #include <spl.h>
 #include <asm/global_data.h>
 #include <dm/uclass-internal.h>

 #if CONFIG_IS_ENABLED(OF_LIBFDT)
 /**
  * spl_node_to_boot_device() - maps from a DT-node to a SPL boot device
  * @node:	of_offset of the node
  *
  * The SPL framework uses BOOT_DEVICE_... constants to identify its boot
  * sources.  These may take on a device-specific meaning, depending on
  * what nodes are enabled in a DTS (e.g. BOOT_DEVICE_MMC1 may refer to
  * different controllers/block-devices, depending on which SD/MMC controllers
  * are enabled in any given DTS).  This function maps from a DT-node back
  * onto a BOOT_DEVICE_... constant, considering the currently active devices.
  *
  * Returns
  *   -ENOENT, if no device matching the node could be found
  *   -ENOSYS, if the device matching the node can not be mapped onto a
  *            SPL boot device (e.g. the third MMC device)
  *   -1, for unspecified failures
  *   a positive integer (from the BOOT_DEVICE_... family) on succes.
  */

 static int spl_node_to_boot_device(int node)
 {
 	struct udevice *parent;

 	/*
 	 * This should eventually move into the SPL code, once SPL becomes
 	 * aware of the block-device layer.  Until then (and to avoid unneeded
 	 * delays in getting this feature out), it lives at the board-level.
 	 */
 	if (!uclass_get_device_by_of_offset(UCLASS_MMC, node, &parent)) {
 		struct udevice *dev;
 		struct blk_desc *desc = NULL;

 		for (device_find_first_child(parent, &dev);
 		     dev;
 		     device_find_next_child(&dev)) {
 			if (device_get_uclass_id(dev) == UCLASS_BLK) {
 				desc = dev_get_uclass_plat(dev);
 				break;
 			}
 		}

 		if (!desc)
 			return -ENOENT;

 		switch (desc->devnum) {
 		case 0:
 			return BOOT_DEVICE_MMC1;
 		case 1:
 			return BOOT_DEVICE_MMC2;
 		default:
 			return -ENOSYS;
 		}
 	}

 	/*
 	 * SPL doesn't differentiate SPI flashes, so we keep the detection
 	 * brief and inaccurate... hopefully, the common SPL layer can be
 	 * extended with awareness of the BLK layer (and matching OF_CONTROL)
 	 * soon.
 	 */
 	if (!uclass_get_device_by_of_offset(UCLASS_SPI_FLASH, node, &parent))
 		return BOOT_DEVICE_SPI;

 	return -1;
 }

 /**
  * board_spl_was_booted_from() - retrieves the of-path the SPL was loaded from
  *
  * To support a 'same-as-spl' specification in the search-order for the next
  * stage, we need a SoC- or board-specific way to handshake with what 'came
  * before us' (either a BROM or TPL stage) and map the info retrieved onto
  * a OF path.
  *
  * Returns
  *   NULL, on failure or if the device could not be identified
  *   a of_path (a string), on success
  */
 __weak const char *board_spl_was_booted_from(void)
 {
 	debug("%s: no support for 'same-as-spl' for this board\n", __func__);
 	return NULL;
 }

 void board_boot_order(u32 *spl_boot_list)
 {
 	/* In case of no fdt (or only plat), use spl_boot_device() */
 	if (!CONFIG_IS_ENABLED(OF_CONTROL) || CONFIG_IS_ENABLED(OF_PLATDATA)) {
 		spl_boot_list[0] = spl_boot_device();
 		return;
 	}

 	const void *blob = gd->fdt_blob;
 	int chosen_node = fdt_path_offset(blob, "/chosen");
 	int idx = 0;
 	int elem;
 	int boot_device;
 	int node;
 	const char *conf;

 	if (chosen_node < 0) {
 		debug("%s: /chosen not found, using spl_boot_device()\n",
 		      __func__);
 		spl_boot_list[0] = spl_boot_device();
 		return;
 	}

 	for (elem = 0;
 	     (conf = fdt_stringlist_get(blob, chosen_node,
 					"u-boot,spl-boot-order", elem, NULL));
 	     elem++) {
 		const char *alias;

 		/* Handle the case of 'same device the SPL was loaded from' */
 		if (strncmp(conf, "same-as-spl", 11) == 0) {
 			conf = board_spl_was_booted_from();
 			if (!conf)
 				continue;
 		}

 		/* First check if the list element is an alias */
 		alias = fdt_get_alias(blob, conf);
 		if (alias)
 			conf = alias;

 		/* Try to resolve the config item (or alias) as a path */
 		node = fdt_path_offset(blob, conf);
 		if (node < 0) {
 			debug("%s: could not find %s in FDT\n", __func__, conf);
 			continue;
 		}

 		/* Try to map this back onto SPL boot devices */
 		boot_device = spl_node_to_boot_device(node);
 		if (boot_device < 0) {
 			debug("%s: could not map node @%x to a boot-device\n",
 			      __func__, node);
 			continue;
 		}

 		spl_boot_list[idx++] = boot_device;
 	}

 	/* If we had no matches, fall back to spl_boot_device */
 	if (idx == 0)
 		spl_boot_list[0] = spl_boot_device();
 }

 int spl_decode_boot_device(u32 boot_device, char *buf, size_t buflen)
 {
 	struct udevice *dev;
 #if CONFIG_IS_ENABLED(BLK)
 	int dev_num;
 #endif
 	int ret;

 	if (boot_device == BOOT_DEVICE_SPI) {
 		/* Revert spl_node_to_boot_device() logic to find appropriate SPI flash device */

 		/*
 		 * Devices with multiple SPI flash devices will take the first SPI flash found in
 		 * /chosen/u-boot,spl-boot-order.
 		 */
 		const void *blob = gd->fdt_blob;
 		int chosen_node = fdt_path_offset(blob, "/chosen");
 		int elem;
 		int node;
 		const char *conf;

 		if (chosen_node < 0) {
 			debug("%s: /chosen not found\n", __func__);
 			return -ENODEV;
 		}

 		for (elem = 0;
 		     (conf = fdt_stringlist_get(blob, chosen_node,
 						"u-boot,spl-boot-order", elem, NULL));
 		     elem++) {
 			const char *alias;

 			/* Handle the case of 'same device the SPL was loaded from' */
 			if (strncmp(conf, "same-as-spl", 11) == 0) {
 				conf = board_spl_was_booted_from();
 				if (!conf)
 					continue;
 			}

 			/* First check if the list element is an alias */
 			alias = fdt_get_alias(blob, conf);
 			if (alias)
 				conf = alias;

 			/* Try to resolve the config item (or alias) as a path */
 			node = fdt_path_offset(blob, conf);
 			if (node < 0) {
 				debug("%s: could not find %s in FDT\n", __func__, conf);
 				continue;
 			}

 			ret = uclass_find_device_by_of_offset(UCLASS_SPI_FLASH, node, &dev);
 			if (ret) {
 				debug("%s: could not find udevice for %s\n", __func__, conf);
 				continue;
 			}

 			return ofnode_get_path(dev_ofnode(dev), buf, buflen);
 		}

 		return -ENODEV;
 	}

 #if CONFIG_IS_ENABLED(BLK)
 	dev_num = (boot_device == BOOT_DEVICE_MMC1) ? 0 : 1;

 	ret = blk_find_device(UCLASS_MMC, dev_num, &dev);
 	if (ret) {
 		debug("%s: could not find blk device for MMC device %d: %d\n",
 		      __func__, dev_num, ret);
 		return ret;
 	}

 	dev = dev_get_parent(dev);
 	return ofnode_get_path(dev_ofnode(dev), buf, buflen);
 #else
 	return -ENODEV;
 #endif
 }

 void spl_perform_fixups(struct spl_image_info *spl_image)
 {
 	void *blob = spl_image_fdt_addr(spl_image);
 	char boot_ofpath[512];
 	int chosen, ret;

 	/*
 	 * Inject the ofpath of the device the full U-Boot (or Linux in
 	 * Falcon-mode) was booted from into the FDT, if a FDT has been
 	 * loaded at the same time.
 	 */
 	if (!blob)
 		return;

 	ret = spl_decode_boot_device(spl_image->boot_device, boot_ofpath, sizeof(boot_ofpath));
 	if (ret) {
 		pr_err("%s: could not map boot_device to ofpath: %d\n", __func__, ret);
 		return;
 	}

 	chosen = fdt_find_or_add_subnode(blob, 0, "chosen");
 	if (chosen < 0) {
 		pr_err("%s: could not find/create '/chosen'\n", __func__);
 		return;
 	}
 	fdt_setprop_string(blob, chosen,
 			   "u-boot,spl-boot-device", boot_ofpath);
 }
 #endif
	// SPDX-License-Identifier: GPL-2.0+
	/*
	* (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH
	*/

	#include <common.h>
	#include <dm.h>
	#include <fdt_support.h>
	#include <log.h>
	#include <mmc.h>
	#include <spl.h>
	#include <asm/global_data.h>
	#include <dm/uclass-internal.h>

	#if CONFIG_IS_ENABLED(OF_LIBFDT)
	/**
	* spl_node_to_boot_device() - maps from a DT-node to a SPL boot device
	* @node: of_offset of the node
	*
	* The SPL framework uses BOOT_DEVICE_... constants to identify its boot
	* sources. These may take on a device-specific meaning, depending on
	* what nodes are enabled in a DTS (e.g. BOOT_DEVICE_MMC1 may refer to
	* different controllers/block-devices, depending on which SD/MMC controllers
	* are enabled in any given DTS). This function maps from a DT-node back
	* onto a BOOT_DEVICE_... constant, considering the currently active devices.
	*
	* Returns
	* -ENOENT, if no device matching the node could be found
	* -ENOSYS, if the device matching the node can not be mapped onto a
	* SPL boot device (e.g. the third MMC device)
	* -1, for unspecified failures
	* a positive integer (from the BOOT_DEVICE_... family) on succes.
	*/

	static int spl_node_to_boot_device(int node)
	{
	struct udevice *parent;

	/*
	* This should eventually move into the SPL code, once SPL becomes
	* aware of the block-device layer. Until then (and to avoid unneeded
	* delays in getting this feature out), it lives at the board-level.
	*/
	if (!uclass_get_device_by_of_offset(UCLASS_MMC, node, &parent)) {
	struct udevice *dev;
	struct blk_desc *desc = NULL;

	for (device_find_first_child(parent, &dev);
	dev;
	device_find_next_child(&dev)) {
	if (device_get_uclass_id(dev) == UCLASS_BLK) {
	desc = dev_get_uclass_plat(dev);
	break;
	}
	}

	if (!desc)
	return -ENOENT;

	switch (desc->devnum) {
	case 0:
	return BOOT_DEVICE_MMC1;
	case 1:
	return BOOT_DEVICE_MMC2;
	default:
	return -ENOSYS;
	}
	}

	/*
	* SPL doesn't differentiate SPI flashes, so we keep the detection
	* brief and inaccurate... hopefully, the common SPL layer can be
	* extended with awareness of the BLK layer (and matching OF_CONTROL)
	* soon.
	*/
	if (!uclass_get_device_by_of_offset(UCLASS_SPI_FLASH, node, &parent))
	return BOOT_DEVICE_SPI;

	return -1;
	}

	/**
	* board_spl_was_booted_from() - retrieves the of-path the SPL was loaded from
	*
	* To support a 'same-as-spl' specification in the search-order for the next
	* stage, we need a SoC- or board-specific way to handshake with what 'came
	* before us' (either a BROM or TPL stage) and map the info retrieved onto
	* a OF path.
	*
	* Returns
	* NULL, on failure or if the device could not be identified
	* a of_path (a string), on success
	*/
	__weak const char *board_spl_was_booted_from(void)
	{
	debug("%s: no support for 'same-as-spl' for this board\n", __func__);
	return NULL;
	}

	void board_boot_order(u32 *spl_boot_list)
	{
	/* In case of no fdt (or only plat), use spl_boot_device() */
	if (!CONFIG_IS_ENABLED(OF_CONTROL) \|\| CONFIG_IS_ENABLED(OF_PLATDATA)) {
	spl_boot_list[0] = spl_boot_device();
	return;
	}

	const void *blob = gd->fdt_blob;
	int chosen_node = fdt_path_offset(blob, "/chosen");
	int idx = 0;
	int elem;
	int boot_device;
	int node;
	const char *conf;

	if (chosen_node < 0) {
	debug("%s: /chosen not found, using spl_boot_device()\n",
	__func__);
	spl_boot_list[0] = spl_boot_device();
	return;
	}

	for (elem = 0;
	(conf = fdt_stringlist_get(blob, chosen_node,
	"u-boot,spl-boot-order", elem, NULL));
	elem++) {
	const char *alias;

	/* Handle the case of 'same device the SPL was loaded from' */
	if (strncmp(conf, "same-as-spl", 11) == 0) {
	conf = board_spl_was_booted_from();
	if (!conf)
	continue;
	}

	/* First check if the list element is an alias */
	alias = fdt_get_alias(blob, conf);
	if (alias)
	conf = alias;

	/* Try to resolve the config item (or alias) as a path */
	node = fdt_path_offset(blob, conf);
	if (node < 0) {
	debug("%s: could not find %s in FDT\n", __func__, conf);
	continue;
	}

	/* Try to map this back onto SPL boot devices */
	boot_device = spl_node_to_boot_device(node);
	if (boot_device < 0) {
	debug("%s: could not map node @%x to a boot-device\n",
	__func__, node);
	continue;
	}

	spl_boot_list[idx++] = boot_device;
	}

	/* If we had no matches, fall back to spl_boot_device */
	if (idx == 0)
	spl_boot_list[0] = spl_boot_device();
	}

	int spl_decode_boot_device(u32 boot_device, char *buf, size_t buflen)
	{
	struct udevice *dev;
	#if CONFIG_IS_ENABLED(BLK)
	int dev_num;
	#endif
	int ret;

	if (boot_device == BOOT_DEVICE_SPI) {
	/* Revert spl_node_to_boot_device() logic to find appropriate SPI flash device */

	/*
	* Devices with multiple SPI flash devices will take the first SPI flash found in
	* /chosen/u-boot,spl-boot-order.
	*/
	const void *blob = gd->fdt_blob;
	int chosen_node = fdt_path_offset(blob, "/chosen");
	int elem;
	int node;
	const char *conf;

	if (chosen_node < 0) {
	debug("%s: /chosen not found\n", __func__);
	return -ENODEV;
	}

	for (elem = 0;
	(conf = fdt_stringlist_get(blob, chosen_node,
	"u-boot,spl-boot-order", elem, NULL));
	elem++) {
	const char *alias;

	/* Handle the case of 'same device the SPL was loaded from' */
	if (strncmp(conf, "same-as-spl", 11) == 0) {
	conf = board_spl_was_booted_from();
	if (!conf)
	continue;
	}

	/* First check if the list element is an alias */
	alias = fdt_get_alias(blob, conf);
	if (alias)
	conf = alias;

	/* Try to resolve the config item (or alias) as a path */
	node = fdt_path_offset(blob, conf);
	if (node < 0) {
	debug("%s: could not find %s in FDT\n", __func__, conf);
	continue;
	}

	ret = uclass_find_device_by_of_offset(UCLASS_SPI_FLASH, node, &dev);
	if (ret) {
	debug("%s: could not find udevice for %s\n", __func__, conf);
	continue;
	}

	return ofnode_get_path(dev_ofnode(dev), buf, buflen);
	}

	return -ENODEV;
	}

	#if CONFIG_IS_ENABLED(BLK)
	dev_num = (boot_device == BOOT_DEVICE_MMC1) ? 0 : 1;

	ret = blk_find_device(UCLASS_MMC, dev_num, &dev);
	if (ret) {
	debug("%s: could not find blk device for MMC device %d: %d\n",
	__func__, dev_num, ret);
	return ret;
	}

	dev = dev_get_parent(dev);
	return ofnode_get_path(dev_ofnode(dev), buf, buflen);
	#else
	return -ENODEV;
	#endif
	}

	void spl_perform_fixups(struct spl_image_info *spl_image)
	{
	void *blob = spl_image_fdt_addr(spl_image);
	char boot_ofpath[512];
	int chosen, ret;

	/*
	* Inject the ofpath of the device the full U-Boot (or Linux in
	* Falcon-mode) was booted from into the FDT, if a FDT has been
	* loaded at the same time.
	*/
	if (!blob)
	return;

	ret = spl_decode_boot_device(spl_image->boot_device, boot_ofpath, sizeof(boot_ofpath));
	if (ret) {
	pr_err("%s: could not map boot_device to ofpath: %d\n", __func__, ret);
	return;
	}

	chosen = fdt_find_or_add_subnode(blob, 0, "chosen");
	if (chosen < 0) {
	pr_err("%s: could not find/create '/chosen'\n", __func__);
	return;
	}
	fdt_setprop_string(blob, chosen,
	"u-boot,spl-boot-device", boot_ofpath);
	}
	#endif