| if ARCH_MVEBU |
| |
| config HAVE_MVEBU_EFUSE |
| bool |
| |
| config ARMADA_32BIT |
| bool |
| select ARCH_MISC_INIT |
| select BOARD_EARLY_INIT_F |
| select CPU_V7A |
| select SPL_DM if SPL |
| select SPL_DM_SEQ_ALIAS if SPL |
| select SPL_OF_CONTROL if SPL |
| select SPL_SKIP_LOWLEVEL_INIT if SPL |
| select SPL_SIMPLE_BUS if SPL |
| select SUPPORT_SPL |
| select SYS_L2_PL310 if !SYS_L2CACHE_OFF |
| select TRANSLATION_OFFSET |
| select SPL_SYS_NO_VECTOR_TABLE if SPL |
| select ARCH_VERY_EARLY_INIT |
| |
| # ARMv7 SoCs... |
| config ARMADA_375 |
| bool |
| select ARMADA_32BIT |
| |
| config ARMADA_38X |
| bool |
| select ARMADA_32BIT |
| select HAVE_MVEBU_EFUSE |
| |
| config ARMADA_38X_HS_IMPEDANCE_THRESH |
| hex "Armada 38x USB 2.0 High-Speed Impedance Threshold (0x0 - 0x7)" |
| depends on ARMADA_38X |
| default 0x6 |
| range 0x0 0x7 |
| |
| config ARMADA_XP |
| bool |
| select ARMADA_32BIT |
| |
| # ARMv8 SoCs... |
| config ARMADA_3700 |
| bool |
| select ARM64 |
| select HAVE_MVEBU_EFUSE |
| |
| # Armada 7K and 8K are very similar - use only one Kconfig symbol for both |
| config ARMADA_8K |
| bool |
| select ARM64 |
| |
| config ALLEYCAT_5 |
| bool |
| select ARM64 |
| |
| # Armada PLL frequency (used for NAND clock generation) |
| config SYS_MVEBU_PLL_CLOCK |
| int |
| default "2000000000" if ARMADA_XP || ARMADA_3700 || ARMADA_8K || ARMADA_MSYS |
| default "1000000000" if ARMADA_38X || ARMADA_375 |
| |
| # Armada XP/38x SoC types... |
| config MV78230 |
| bool |
| select ARMADA_XP |
| |
| config MV78260 |
| bool |
| select ARMADA_XP |
| imply CMD_SATA |
| |
| config MV78460 |
| bool |
| select ARMADA_XP |
| |
| config ARMADA_MSYS |
| bool |
| select ARMADA_32BIT |
| |
| config 98DX4251 |
| bool |
| select ARMADA_MSYS |
| |
| config 98DX3336 |
| bool |
| select ARMADA_MSYS |
| |
| config 98DX3236 |
| bool |
| select ARMADA_MSYS |
| |
| config 88F6820 |
| bool |
| select ARMADA_38X |
| |
| config CUSTOMER_BOARD_SUPPORT |
| bool |
| |
| config DDR4 |
| bool "Support Marvell DDR4 Training driver" |
| |
| choice |
| prompt "Armada XP/375/38x/3700/7K/8K/Alleycat-5 board select" |
| optional |
| |
| config TARGET_CLEARFOG |
| bool "Support ClearFog" |
| select 88F6820 |
| select BOARD_LATE_INIT |
| |
| config TARGET_HELIOS4 |
| bool "Support Helios4" |
| select 88F6820 |
| |
| config TARGET_MVEBU_ARMADA_37XX |
| bool "Support Armada 37xx platforms" |
| select ARMADA_3700 |
| imply SCSI |
| |
| config TARGET_DB_88F6720 |
| bool "Support DB-88F6720 Armada 375" |
| select ARMADA_375 |
| |
| config TARGET_DB_88F6820_GP |
| bool "Support DB-88F6820-GP" |
| select 88F6820 |
| |
| config TARGET_DB_88F6820_AMC |
| bool "Support DB-88F6820-AMC" |
| select 88F6820 |
| |
| config TARGET_TURRIS_OMNIA |
| bool "Support Turris Omnia" |
| select 88F6820 |
| select BOARD_LATE_INIT |
| select DM_I2C |
| select I2C_MUX |
| select I2C_MUX_PCA954x |
| select SPL_DRIVERS_MISC |
| select SPL_I2C_MUX |
| select SPL_SYS_MALLOC_SIMPLE |
| select SYS_I2C_MVTWSI |
| select ATSHA204A |
| |
| config TARGET_TURRIS_MOX |
| bool "Support Turris Mox" |
| select ARMADA_3700 |
| |
| config TARGET_MVEBU_ARMADA_8K |
| bool "Support Armada 7k/8k platforms" |
| select ARMADA_8K |
| select BOARD_LATE_INIT |
| imply SCSI |
| |
| config TARGET_MVEBU_ALLEYCAT5 |
| bool "Support AlleyCat 5 platforms" |
| select ALLEYCAT_5 |
| |
| config TARGET_OCTEONTX2_CN913x |
| bool "Support CN913x platforms" |
| select ARMADA_8K |
| imply BOARD_EARLY_INIT_R |
| select BOARD_LATE_INIT |
| imply SCSI |
| |
| config TARGET_DB_MV784MP_GP |
| bool "Support db-mv784mp-gp" |
| select BOARD_ECC_SUPPORT |
| select MV78460 |
| |
| config TARGET_DS414 |
| bool "Support Synology DS414" |
| select MV78230 |
| |
| config TARGET_MAXBCM |
| bool "Support maxbcm" |
| select BOARD_ECC_SUPPORT |
| select MV78460 |
| |
| config TARGET_N2350 |
| bool "Support Thecus N2350" |
| select 88F6820 |
| select DDR4 |
| |
| config TARGET_THEADORABLE |
| bool "Support theadorable Armada XP" |
| select BOARD_LATE_INIT if USB |
| select MV78260 |
| imply CMD_SATA |
| |
| config TARGET_CONTROLCENTERDC |
| bool "Support CONTROLCENTERDC" |
| select 88F6820 |
| select CUSTOMER_BOARD_SUPPORT |
| |
| config TARGET_X530 |
| bool "Support Allied Telesis x530" |
| select 88F6820 |
| |
| config TARGET_DB_XC3_24G4XG |
| bool "Support DB-XC3-24G4XG" |
| select 98DX3336 |
| |
| config TARGET_CRS3XX_98DX3236 |
| bool "Support CRS3XX-98DX3236" |
| select 98DX3236 |
| |
| endchoice |
| |
| choice |
| prompt "DDR bus width" |
| default DDR_64BIT |
| depends on ARMADA_XP |
| |
| config DDR_64BIT |
| bool "64bit bus width" |
| |
| config DDR_32BIT |
| bool "32bit bus width" |
| |
| endchoice |
| |
| config DDR_LOG_LEVEL |
| int "DDR training code log level" |
| depends on ARMADA_XP |
| default 0 |
| range 0 3 |
| help |
| Amount of information provided on error while running the DDR |
| training code. At level 0, provides an error code in a case of |
| failure, RL, WL errors and other algorithm failure. At level 1, |
| provides the D-Unit setup (SPD/Static configuration). At level 2, |
| provides the windows margin as a results of DQS centeralization. |
| At level 3, rovides the windows margin of each DQ as a results of |
| DQS centeralization. |
| |
| config DDR_RESET_ON_TRAINING_FAILURE |
| bool "Reset the board on DDR training failure instead of hanging" |
| depends on ARMADA_38X || ARMADA_XP |
| help |
| If DDR training fails in SPL, reset the board instead of hanging. |
| Some boards are known to fail DDR training occasionally and an |
| immediate reset may be preferable to waiting until the board is |
| reset by watchdog (if there even is one). |
| |
| Note that if booting via UART and the DDR training fails, the |
| device will still hang - it doesn't make sense to reset the board |
| in such a case. |
| |
| config BOARD_ECC_SUPPORT |
| bool |
| |
| config SYS_BOARD |
| default "clearfog" if TARGET_CLEARFOG |
| default "helios4" if TARGET_HELIOS4 |
| default "mvebu_armada-37xx" if TARGET_MVEBU_ARMADA_37XX |
| default "db-88f6720" if TARGET_DB_88F6720 |
| default "db-88f6820-gp" if TARGET_DB_88F6820_GP |
| default "db-88f6820-amc" if TARGET_DB_88F6820_AMC |
| default "turris_omnia" if TARGET_TURRIS_OMNIA |
| default "turris_mox" if TARGET_TURRIS_MOX |
| default "mvebu_armada-8k" if TARGET_MVEBU_ARMADA_8K |
| default "octeontx2_cn913x" if TARGET_OCTEONTX2_CN913x |
| default "db-mv784mp-gp" if TARGET_DB_MV784MP_GP |
| default "ds414" if TARGET_DS414 |
| default "maxbcm" if TARGET_MAXBCM |
| default "n2350" if TARGET_N2350 |
| default "theadorable" if TARGET_THEADORABLE |
| default "a38x" if TARGET_CONTROLCENTERDC |
| default "x530" if TARGET_X530 |
| default "db-xc3-24g4xg" if TARGET_DB_XC3_24G4XG |
| default "crs3xx-98dx3236" if TARGET_CRS3XX_98DX3236 |
| default "mvebu_alleycat-5" if TARGET_MVEBU_ALLEYCAT5 |
| |
| config SYS_CONFIG_NAME |
| default "clearfog" if TARGET_CLEARFOG |
| default "helios4" if TARGET_HELIOS4 |
| default "mvebu_armada-37xx" if TARGET_MVEBU_ARMADA_37XX |
| default "db-88f6720" if TARGET_DB_88F6720 |
| default "db-88f6820-gp" if TARGET_DB_88F6820_GP |
| default "db-88f6820-amc" if TARGET_DB_88F6820_AMC |
| default "mvebu_armada-8k" if TARGET_MVEBU_ARMADA_8K |
| default "mvebu_armada-8k" if TARGET_OCTEONTX2_CN913x |
| default "db-mv784mp-gp" if TARGET_DB_MV784MP_GP |
| default "ds414" if TARGET_DS414 |
| default "maxbcm" if TARGET_MAXBCM |
| default "n2350" if TARGET_N2350 |
| default "theadorable" if TARGET_THEADORABLE |
| default "turris_omnia" if TARGET_TURRIS_OMNIA |
| default "turris_mox" if TARGET_TURRIS_MOX |
| default "controlcenterdc" if TARGET_CONTROLCENTERDC |
| default "x530" if TARGET_X530 |
| default "db-xc3-24g4xg" if TARGET_DB_XC3_24G4XG |
| default "crs3xx-98dx3236" if TARGET_CRS3XX_98DX3236 |
| default "mvebu_alleycat-5" if TARGET_MVEBU_ALLEYCAT5 |
| |
| config SYS_VENDOR |
| default "Marvell" if TARGET_DB_MV784MP_GP |
| default "Marvell" if TARGET_MVEBU_ARMADA_37XX |
| default "Marvell" if TARGET_DB_88F6720 |
| default "Marvell" if TARGET_DB_88F6820_GP |
| default "Marvell" if TARGET_DB_88F6820_AMC |
| default "Marvell" if TARGET_MVEBU_ARMADA_8K |
| default "Marvell" if TARGET_OCTEONTX2_CN913x |
| default "Marvell" if TARGET_DB_XC3_24G4XG |
| default "Marvell" if TARGET_MVEBU_DB_88F7040 |
| default "solidrun" if TARGET_CLEARFOG |
| default "kobol" if TARGET_HELIOS4 |
| default "Synology" if TARGET_DS414 |
| default "thecus" if TARGET_N2350 |
| default "CZ.NIC" if TARGET_TURRIS_OMNIA |
| default "CZ.NIC" if TARGET_TURRIS_MOX |
| default "gdsys" if TARGET_CONTROLCENTERDC |
| default "alliedtelesis" if TARGET_X530 |
| default "mikrotik" if TARGET_CRS3XX_98DX3236 |
| default "Marvell" if TARGET_MVEBU_ALLEYCAT5 |
| |
| config SYS_SOC |
| default "mvebu" |
| |
| choice |
| prompt "Boot method" |
| depends on SPL |
| |
| config MVEBU_SPL_BOOT_DEVICE_SPI |
| bool "SPI NOR flash" |
| imply ENV_IS_IN_SPI_FLASH |
| imply SPL_DM_SPI |
| imply SPL_SPI_FLASH_SUPPORT |
| imply SPL_SPI_LOAD |
| imply SPL_SPI |
| select SPL_BOOTROM_SUPPORT |
| |
| config MVEBU_SPL_BOOT_DEVICE_MMC |
| bool "SDIO/MMC card" |
| imply ENV_IS_IN_MMC |
| # GPIO needed for eMMC/SD card presence detection |
| imply SPL_DM_GPIO |
| imply SPL_DM_MMC |
| imply SPL_GPIO |
| imply SPL_LIBDISK_SUPPORT |
| imply SPL_MMC |
| select SPL_BOOTROM_SUPPORT |
| |
| config MVEBU_SPL_BOOT_DEVICE_SATA |
| bool "SATA" |
| imply SPL_SATA |
| imply SPL_LIBDISK_SUPPORT |
| select SPL_BOOTROM_SUPPORT |
| |
| config MVEBU_SPL_BOOT_DEVICE_UART |
| bool "UART" |
| select SPL_BOOTROM_SUPPORT |
| |
| endchoice |
| |
| config MVEBU_EFUSE |
| bool "Enable eFuse support" |
| depends on HAVE_MVEBU_EFUSE |
| help |
| Enable support for reading and writing eFuses on mvebu SoCs. |
| |
| config MVEBU_EFUSE_FAKE |
| bool "Fake eFuse access (dry run)" |
| depends on MVEBU_EFUSE |
| help |
| This enables a "dry run" mode where eFuses are not really programmed. |
| Instead the eFuse accesses are emulated by writing to and reading |
| from a memory block. |
| This is can be used for testing prog scripts. |
| |
| config MVEBU_EFUSE_VHV_GPIO |
| string "VHV_Enable GPIO name for eFuse programming" |
| depends on MVEBU_EFUSE && !ARMADA_3700 |
| help |
| The eFuse programing (burning) phase requires supplying 1.8V to the |
| device on the VHV power pin, while for normal operation the VHV power |
| rail must be left unconnected. See Marvell AN-389: ARMADA VHV Power |
| document (Doc. No. MV-S302545-00 Rev. C, August 2, 2016) for details. |
| . |
| This specify VHV_Enable GPIO name used in U-Boot for enabling VHV power. |
| |
| config MVEBU_EFUSE_VHV_GPIO_ACTIVE_LOW |
| bool "VHV_Enable GPIO is Active Low" |
| depends on MVEBU_EFUSE_VHV_GPIO != "" |
| |
| config SECURED_MODE_IMAGE |
| bool "Build image for trusted boot" |
| default false |
| depends on 88F6820 |
| help |
| Build an image that employs the ARMADA SoC's trusted boot framework |
| for securely booting images. |
| |
| config SECURED_MODE_CSK_INDEX |
| int "Index of active CSK" |
| default 0 |
| depends on SECURED_MODE_IMAGE |
| |
| source "board/solidrun/clearfog/Kconfig" |
| source "board/kobol/helios4/Kconfig" |
| |
| endif |