| /* |
| * U-boot - Configuration file for BF526 EZBrd board |
| */ |
| |
| #ifndef __CONFIG_BF526_EZBRD_H__ |
| #define __CONFIG_BF526_EZBRD_H__ |
| |
| #include <asm/config-pre.h> |
| |
| |
| /* |
| * Processor Settings |
| */ |
| #define CONFIG_BFIN_CPU bf526-0.0 |
| #define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_PARA |
| |
| |
| /* |
| * Clock Settings |
| * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV |
| * SCLK = (CLKIN * VCO_MULT) / SCLK_DIV |
| */ |
| /* CONFIG_CLKIN_HZ is any value in Hz */ |
| #define CONFIG_CLKIN_HZ 25000000 |
| /* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */ |
| /* 1 = CLKIN / 2 */ |
| #define CONFIG_CLKIN_HALF 0 |
| /* PLL_BYPASS controls the BYPASS bit in PLL_CTL 0 = do not bypass */ |
| /* 1 = bypass PLL */ |
| #define CONFIG_PLL_BYPASS 0 |
| /* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */ |
| /* Values can range from 0-63 (where 0 means 64) */ |
| #define CONFIG_VCO_MULT 16 |
| /* CCLK_DIV controls the core clock divider */ |
| /* Values can be 1, 2, 4, or 8 ONLY */ |
| #define CONFIG_CCLK_DIV 1 |
| /* SCLK_DIV controls the system clock divider */ |
| /* Values can range from 1-15 */ |
| #define CONFIG_SCLK_DIV 5 |
| |
| |
| /* |
| * Memory Settings |
| */ |
| /* This board has a 64meg MT48H32M16 */ |
| #define CONFIG_MEM_ADD_WDTH 10 |
| #define CONFIG_MEM_SIZE 64 |
| |
| #define CONFIG_EBIU_SDRRC_VAL 0x0267 |
| #define CONFIG_EBIU_SDGCTL_VAL (SCTLE | CL_2 | PASR_ALL | TRAS_6 | TRP_4 | TRCD_2 | TWR_2 | PSS) |
| |
| #define CONFIG_EBIU_AMGCTL_VAL (AMCKEN | AMBEN_ALL) |
| #define CONFIG_EBIU_AMBCTL0_VAL (B1WAT_15 | B1RAT_15 | B1HT_3 | B1RDYPOL | B0WAT_15 | B0RAT_15 | B0HT_3 | B0RDYPOL) |
| #define CONFIG_EBIU_AMBCTL1_VAL (B3WAT_15 | B3RAT_15 | B3HT_3 | B3RDYPOL | B2WAT_15 | B2RAT_15 | B2HT_3 | B2RDYPOL) |
| |
| #define CONFIG_SYS_MONITOR_LEN (512 * 1024) |
| #define CONFIG_SYS_MALLOC_LEN (512 * 1024) |
| |
| |
| /* |
| * NAND Settings |
| * (can't be used same time as ethernet) |
| */ |
| #if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_NAND) |
| #define CONFIG_BFIN_NFC |
| #endif |
| #ifdef CONFIG_BFIN_NFC |
| #define CONFIG_BFIN_NFC_CTL_VAL 0x0033 |
| #define CONFIG_DRIVER_NAND_BFIN |
| #define CONFIG_SYS_NAND_BASE 0 /* not actually used */ |
| #define CONFIG_SYS_MAX_NAND_DEVICE 1 |
| #define NAND_MAX_CHIPS 1 |
| #define CONFIG_CMD_NAND |
| #endif |
| |
| |
| /* |
| * Network Settings |
| */ |
| #if !defined(__ADSPBF522__) && !defined(__ADSPBF523__) && \ |
| !defined(__ADSPBF524__) && !defined(__ADSPBF525__) && !defined(CONFIG_BFIN_NFC) |
| #define ADI_CMDS_NETWORK 1 |
| #define CONFIG_BFIN_MAC |
| #define CONFIG_RMII |
| #define CONFIG_NETCONSOLE 1 |
| #define CONFIG_NET_MULTI 1 |
| #endif |
| #define CONFIG_HOSTNAME bf526-ezbrd |
| /* Uncomment next line to use fixed MAC address */ |
| /* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */ |
| |
| |
| /* |
| * Flash Settings |
| */ |
| #define CONFIG_FLASH_CFI_DRIVER |
| #define CONFIG_SYS_FLASH_BASE 0x20000000 |
| #define CONFIG_SYS_FLASH_CFI |
| #define CONFIG_SYS_FLASH_PROTECTION |
| #define CONFIG_SYS_MAX_FLASH_BANKS 1 |
| #define CONFIG_SYS_MAX_FLASH_SECT 71 |
| |
| |
| /* |
| * SPI Settings |
| */ |
| #define CONFIG_BFIN_SPI |
| #define CONFIG_ENV_SPI_MAX_HZ 30000000 |
| #define CONFIG_SF_DEFAULT_SPEED 30000000 |
| #define CONFIG_SPI_FLASH |
| #define CONFIG_SPI_FLASH_SST |
| |
| |
| /* |
| * Env Storage Settings |
| */ |
| #if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER) |
| #define CONFIG_ENV_IS_IN_SPI_FLASH |
| #define CONFIG_ENV_OFFSET 0x4000 |
| #define CONFIG_ENV_SIZE 0x2000 |
| #define CONFIG_ENV_SECT_SIZE 0x2000 |
| #else |
| #define CONFIG_ENV_IS_IN_FLASH |
| #define CONFIG_ENV_OFFSET 0x4000 |
| #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET) |
| #define CONFIG_ENV_SIZE 0x2000 |
| #define CONFIG_ENV_SECT_SIZE 0x2000 |
| #endif |
| #define CONFIG_ENV_IS_EMBEDDED_IN_LDR |
| |
| |
| /* |
| * I2C Settings |
| */ |
| #define CONFIG_BFIN_TWI_I2C 1 |
| #define CONFIG_HARD_I2C 1 |
| #define CONFIG_SYS_I2C_SPEED 50000 |
| #define CONFIG_SYS_I2C_SLAVE 0 |
| |
| |
| /* |
| * USB Settings |
| */ |
| #if !defined(__ADSPBF522__) && !defined(__ADSPBF523__) |
| #define CONFIG_USB |
| #define CONFIG_MUSB_HCD |
| #define CONFIG_USB_BLACKFIN |
| #define CONFIG_USB_STORAGE |
| #define CONFIG_MUSB_TIMEOUT 100000 |
| #endif |
| |
| |
| /* |
| * Misc Settings |
| */ |
| #define CONFIG_MISC_INIT_R |
| #define CONFIG_RTC_BFIN |
| #define CONFIG_UART_CONSOLE 1 |
| |
| /* define to enable run status via led */ |
| /* #define CONFIG_STATUS_LED */ |
| #ifdef CONFIG_STATUS_LED |
| #define CONFIG_GPIO_LED |
| #define CONFIG_BOARD_SPECIFIC_LED |
| /* use LED0 to indicate booting/alive */ |
| #define STATUS_LED_BOOT 0 |
| #define STATUS_LED_BIT GPIO_PF8 |
| #define STATUS_LED_STATE STATUS_LED_ON |
| #define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 4) |
| /* use LED1 to indicate crash */ |
| #define STATUS_LED_CRASH 1 |
| #define STATUS_LED_BIT1 GPIO_PG11 |
| #define STATUS_LED_STATE1 STATUS_LED_ON |
| #define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2) |
| /* #define STATUS_LED_BIT2 GPIO_PG12 */ |
| #endif |
| |
| |
| /* |
| * Pull in common ADI header for remaining command/environment setup |
| */ |
| #include <configs/bfin_adi_common.h> |
| |
| #endif |