| /* |
| * Copyright 2010-2011 Freescale Semiconductor, Inc. |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| /* |
| * QorIQ RDB boards configuration file |
| */ |
| #ifndef __CONFIG_H |
| #define __CONFIG_H |
| |
| #define CONFIG_DISPLAY_BOARDINFO |
| |
| #ifdef CONFIG_36BIT |
| #define CONFIG_PHYS_64BIT |
| #endif |
| |
| #if defined(CONFIG_P1020MBG) |
| #define CONFIG_BOARDNAME "P1020MBG-PC" |
| #define CONFIG_P1020 |
| #define CONFIG_VSC7385_ENET |
| #define CONFIG_SLIC |
| #define __SW_BOOT_MASK 0x03 |
| #define __SW_BOOT_NOR 0xe4 |
| #define __SW_BOOT_SD 0x54 |
| #define CONFIG_SYS_L2_SIZE (256 << 10) |
| #endif |
| |
| #if defined(CONFIG_P1020UTM) |
| #define CONFIG_BOARDNAME "P1020UTM-PC" |
| #define CONFIG_P1020 |
| #define __SW_BOOT_MASK 0x03 |
| #define __SW_BOOT_NOR 0xe0 |
| #define __SW_BOOT_SD 0x50 |
| #define CONFIG_SYS_L2_SIZE (256 << 10) |
| #endif |
| |
| #if defined(CONFIG_P1020RDB_PC) |
| #define CONFIG_BOARDNAME "P1020RDB-PC" |
| #define CONFIG_NAND_FSL_ELBC |
| #define CONFIG_P1020 |
| #define CONFIG_VSC7385_ENET |
| #define CONFIG_SLIC |
| #define __SW_BOOT_MASK 0x03 |
| #define __SW_BOOT_NOR 0x5c |
| #define __SW_BOOT_SPI 0x1c |
| #define __SW_BOOT_SD 0x9c |
| #define __SW_BOOT_NAND 0xec |
| #define __SW_BOOT_PCIE 0x6c |
| #define CONFIG_SYS_L2_SIZE (256 << 10) |
| #endif |
| |
| /* |
| * P1020RDB-PD board has user selectable switches for evaluating different |
| * frequency and boot options for the P1020 device. The table that |
| * follow describe the available options. The front six binary number was in |
| * accordance with SW3[1:6]. |
| * 111101 533 533 267 667 NOR Core0 boot; Core1 hold-off |
| * 101101 667 667 333 667 NOR Core0 boot; Core1 hold-off |
| * 011001 800 800 400 667 NOR Core0 boot; Core1 hold-off |
| * 001001 800 800 400 667 SD/MMC Core0 boot; Core1 hold-off |
| * 001101 800 800 400 667 SPI Core0 boot; Core1 hold-off |
| * 010001 800 800 400 667 NAND Core0 boot; Core1 hold-off |
| * 011101 800 800 400 667 PCIe-2 Core0 boot; Core1 hold-off |
| */ |
| #if defined(CONFIG_P1020RDB_PD) |
| #define CONFIG_BOARDNAME "P1020RDB-PD" |
| #define CONFIG_NAND_FSL_ELBC |
| #define CONFIG_P1020 |
| #define CONFIG_VSC7385_ENET |
| #define CONFIG_SLIC |
| #define __SW_BOOT_MASK 0x03 |
| #define __SW_BOOT_NOR 0x64 |
| #define __SW_BOOT_SPI 0x34 |
| #define __SW_BOOT_SD 0x24 |
| #define __SW_BOOT_NAND 0x44 |
| #define __SW_BOOT_PCIE 0x74 |
| #define CONFIG_SYS_L2_SIZE (256 << 10) |
| /* |
| * Dynamic MTD Partition support with mtdparts |
| */ |
| #define CONFIG_MTD_DEVICE |
| #define CONFIG_MTD_PARTITIONS |
| #define CONFIG_CMD_MTDPARTS |
| #define CONFIG_FLASH_CFI_MTD |
| #define MTDIDS_DEFAULT "nor0=ec000000.nor" |
| #define MTDPARTS_DEFAULT "mtdparts=ec000000.nor:128k(dtb),6016k(kernel)," \ |
| "57088k(fs),1m(vsc7385-firmware),1280k(u-boot)" |
| #endif |
| |
| #if defined(CONFIG_P1021RDB) |
| #define CONFIG_BOARDNAME "P1021RDB-PC" |
| #define CONFIG_NAND_FSL_ELBC |
| #define CONFIG_P1021 |
| #define CONFIG_QE |
| #define CONFIG_VSC7385_ENET |
| #define CONFIG_SYS_LBC_LBCR 0x00080000 /* Implement conversion of |
| addresses in the LBC */ |
| #define __SW_BOOT_MASK 0x03 |
| #define __SW_BOOT_NOR 0x5c |
| #define __SW_BOOT_SPI 0x1c |
| #define __SW_BOOT_SD 0x9c |
| #define __SW_BOOT_NAND 0xec |
| #define __SW_BOOT_PCIE 0x6c |
| #define CONFIG_SYS_L2_SIZE (256 << 10) |
| /* |
| * Dynamic MTD Partition support with mtdparts |
| */ |
| #define CONFIG_MTD_DEVICE |
| #define CONFIG_MTD_PARTITIONS |
| #define CONFIG_CMD_MTDPARTS |
| #define CONFIG_FLASH_CFI_MTD |
| #ifdef CONFIG_PHYS_64BIT |
| #define MTDIDS_DEFAULT "nor0=fef000000.nor" |
| #define MTDPARTS_DEFAULT "mtdparts=fef000000.nor:256k(vsc7385-firmware)," \ |
| "256k(dtb),4608k(kernel),9728k(fs)," \ |
| "256k(qe-ucode-firmware),1280k(u-boot)" |
| #else |
| #define MTDIDS_DEFAULT "nor0=ef000000.nor" |
| #define MTDPARTS_DEFAULT "mtdparts=ef000000.nor:256k(vsc7385-firmware)," \ |
| "256k(dtb),4608k(kernel),9728k(fs)," \ |
| "256k(qe-ucode-firmware),1280k(u-boot)" |
| #endif |
| #endif |
| |
| #if defined(CONFIG_P1024RDB) |
| #define CONFIG_BOARDNAME "P1024RDB" |
| #define CONFIG_NAND_FSL_ELBC |
| #define CONFIG_P1024 |
| #define CONFIG_SLIC |
| #define __SW_BOOT_MASK 0xf3 |
| #define __SW_BOOT_NOR 0x00 |
| #define __SW_BOOT_SPI 0x08 |
| #define __SW_BOOT_SD 0x04 |
| #define __SW_BOOT_NAND 0x0c |
| #define CONFIG_SYS_L2_SIZE (256 << 10) |
| #endif |
| |
| #if defined(CONFIG_P1025RDB) |
| #define CONFIG_BOARDNAME "P1025RDB" |
| #define CONFIG_NAND_FSL_ELBC |
| #define CONFIG_P1025 |
| #define CONFIG_QE |
| #define CONFIG_SLIC |
| |
| #define CONFIG_SYS_LBC_LBCR 0x00080000 /* Implement conversion of |
| addresses in the LBC */ |
| #define __SW_BOOT_MASK 0xf3 |
| #define __SW_BOOT_NOR 0x00 |
| #define __SW_BOOT_SPI 0x08 |
| #define __SW_BOOT_SD 0x04 |
| #define __SW_BOOT_NAND 0x0c |
| #define CONFIG_SYS_L2_SIZE (256 << 10) |
| #endif |
| |
| #if defined(CONFIG_P2020RDB) |
| #define CONFIG_BOARDNAME "P2020RDB-PCA" |
| #define CONFIG_NAND_FSL_ELBC |
| #define CONFIG_P2020 |
| #define CONFIG_VSC7385_ENET |
| #define __SW_BOOT_MASK 0x03 |
| #define __SW_BOOT_NOR 0xc8 |
| #define __SW_BOOT_SPI 0x28 |
| #define __SW_BOOT_SD 0x68 /* or 0x18 */ |
| #define __SW_BOOT_NAND 0xe8 |
| #define __SW_BOOT_PCIE 0xa8 |
| #define CONFIG_SYS_L2_SIZE (512 << 10) |
| /* |
| * Dynamic MTD Partition support with mtdparts |
| */ |
| #define CONFIG_MTD_DEVICE |
| #define CONFIG_MTD_PARTITIONS |
| #define CONFIG_CMD_MTDPARTS |
| #define CONFIG_FLASH_CFI_MTD |
| #ifdef CONFIG_PHYS_64BIT |
| #define MTDIDS_DEFAULT "nor0=fef000000.nor" |
| #define MTDPARTS_DEFAULT "mtdparts=fef000000.nor:256k(vsc7385-firmware)," \ |
| "256k(dtb),4608k(kernel),9984k(fs),1280k(u-boot)" |
| #else |
| #define MTDIDS_DEFAULT "nor0=ef000000.nor" |
| #define MTDPARTS_DEFAULT "mtdparts=ef000000.nor:256k(vsc7385-firmware)," \ |
| "256k(dtb),4608k(kernel),9984k(fs),1280k(u-boot)" |
| #endif |
| #endif |
| |
| #ifdef CONFIG_SDCARD |
| #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT |
| #define CONFIG_SPL_ENV_SUPPORT |
| #define CONFIG_SPL_SERIAL_SUPPORT |
| #define CONFIG_SPL_MMC_SUPPORT |
| #define CONFIG_SPL_MMC_MINIMAL |
| #define CONFIG_SPL_FLUSH_IMAGE |
| #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" |
| #define CONFIG_SPL_LIBGENERIC_SUPPORT |
| #define CONFIG_SPL_LIBCOMMON_SUPPORT |
| #define CONFIG_SPL_I2C_SUPPORT |
| #define CONFIG_FSL_LAW /* Use common FSL init code */ |
| #define CONFIG_SYS_TEXT_BASE 0x11001000 |
| #define CONFIG_SPL_TEXT_BASE 0xf8f81000 |
| #define CONFIG_SPL_PAD_TO 0x20000 |
| #define CONFIG_SPL_MAX_SIZE (128 * 1024) |
| #define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10) |
| #define CONFIG_SYS_MMC_U_BOOT_DST (0x11000000) |
| #define CONFIG_SYS_MMC_U_BOOT_START (0x11000000) |
| #define CONFIG_SYS_MMC_U_BOOT_OFFS (128 << 10) |
| #define CONFIG_SYS_MPC85XX_NO_RESETVEC |
| #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" |
| #define CONFIG_SPL_MMC_BOOT |
| #ifdef CONFIG_SPL_BUILD |
| #define CONFIG_SPL_COMMON_INIT_DDR |
| #endif |
| #endif |
| |
| #ifdef CONFIG_SPIFLASH |
| #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT |
| #define CONFIG_SPL_ENV_SUPPORT |
| #define CONFIG_SPL_SERIAL_SUPPORT |
| #define CONFIG_SPL_SPI_SUPPORT |
| #define CONFIG_SPL_SPI_FLASH_SUPPORT |
| #define CONFIG_SPL_SPI_FLASH_MINIMAL |
| #define CONFIG_SPL_FLUSH_IMAGE |
| #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" |
| #define CONFIG_SPL_LIBGENERIC_SUPPORT |
| #define CONFIG_SPL_LIBCOMMON_SUPPORT |
| #define CONFIG_SPL_I2C_SUPPORT |
| #define CONFIG_FSL_LAW /* Use common FSL init code */ |
| #define CONFIG_SYS_TEXT_BASE 0x11001000 |
| #define CONFIG_SPL_TEXT_BASE 0xf8f81000 |
| #define CONFIG_SPL_PAD_TO 0x20000 |
| #define CONFIG_SPL_MAX_SIZE (128 * 1024) |
| #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10) |
| #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x11000000) |
| #define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x11000000) |
| #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (128 << 10) |
| #define CONFIG_SYS_MPC85XX_NO_RESETVEC |
| #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" |
| #define CONFIG_SPL_SPI_BOOT |
| #ifdef CONFIG_SPL_BUILD |
| #define CONFIG_SPL_COMMON_INIT_DDR |
| #endif |
| #endif |
| |
| #ifdef CONFIG_NAND |
| #ifdef CONFIG_TPL_BUILD |
| #define CONFIG_SPL_NAND_BOOT |
| #define CONFIG_SPL_FLUSH_IMAGE |
| #define CONFIG_SPL_ENV_SUPPORT |
| #define CONFIG_SPL_NAND_INIT |
| #define CONFIG_SPL_SERIAL_SUPPORT |
| #define CONFIG_SPL_LIBGENERIC_SUPPORT |
| #define CONFIG_SPL_LIBCOMMON_SUPPORT |
| #define CONFIG_SPL_I2C_SUPPORT |
| #define CONFIG_SPL_NAND_SUPPORT |
| #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT |
| #define CONFIG_SPL_COMMON_INIT_DDR |
| #define CONFIG_SPL_MAX_SIZE (128 << 10) |
| #define CONFIG_SPL_TEXT_BASE 0xf8f81000 |
| #define CONFIG_SYS_MPC85XX_NO_RESETVEC |
| #define CONFIG_SYS_NAND_U_BOOT_SIZE (832 << 10) |
| #define CONFIG_SYS_NAND_U_BOOT_DST (0x11000000) |
| #define CONFIG_SYS_NAND_U_BOOT_START (0x11000000) |
| #define CONFIG_SYS_NAND_U_BOOT_OFFS ((128 + 128) << 10) |
| #elif defined(CONFIG_SPL_BUILD) |
| #define CONFIG_SPL_INIT_MINIMAL |
| #define CONFIG_SPL_SERIAL_SUPPORT |
| #define CONFIG_SPL_NAND_SUPPORT |
| #define CONFIG_SPL_FLUSH_IMAGE |
| #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" |
| #define CONFIG_SPL_TEXT_BASE 0xff800000 |
| #define CONFIG_SPL_MAX_SIZE 4096 |
| #define CONFIG_SYS_NAND_U_BOOT_SIZE (128 << 10) |
| #define CONFIG_SYS_NAND_U_BOOT_DST 0xf8f80000 |
| #define CONFIG_SYS_NAND_U_BOOT_START 0xf8f80000 |
| #define CONFIG_SYS_NAND_U_BOOT_OFFS (128 << 10) |
| #endif /* not CONFIG_TPL_BUILD */ |
| |
| #define CONFIG_SPL_PAD_TO 0x20000 |
| #define CONFIG_TPL_PAD_TO 0x20000 |
| #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" |
| #define CONFIG_SYS_TEXT_BASE 0x11001000 |
| #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" |
| #endif |
| |
| #ifndef CONFIG_SYS_TEXT_BASE |
| #define CONFIG_SYS_TEXT_BASE 0xeff40000 |
| #endif |
| |
| #ifndef CONFIG_RESET_VECTOR_ADDRESS |
| #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc |
| #endif |
| |
| #ifndef CONFIG_SYS_MONITOR_BASE |
| #ifdef CONFIG_SPL_BUILD |
| #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE |
| #else |
| #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ |
| #endif |
| #endif |
| |
| /* High Level Configuration Options */ |
| #define CONFIG_BOOKE |
| #define CONFIG_E500 |
| |
| #define CONFIG_MP |
| |
| #define CONFIG_FSL_ELBC |
| #define CONFIG_PCI |
| #define CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */ |
| #define CONFIG_PCIE2 /* PCIE controler 2 (slot 2) */ |
| #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ |
| #define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ |
| #define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */ |
| #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ |
| |
| #define CONFIG_FSL_LAW |
| #define CONFIG_TSEC_ENET /* tsec ethernet support */ |
| #define CONFIG_ENV_OVERWRITE |
| |
| #define CONFIG_CMD_SATA |
| #define CONFIG_SATA_SIL |
| #define CONFIG_SYS_SATA_MAX_DEVICE 2 |
| #define CONFIG_LIBATA |
| #define CONFIG_LBA48 |
| |
| #if defined(CONFIG_P2020RDB) |
| #define CONFIG_SYS_CLK_FREQ 100000000 |
| #else |
| #define CONFIG_SYS_CLK_FREQ 66666666 |
| #endif |
| #define CONFIG_DDR_CLK_FREQ 66666666 |
| |
| #define CONFIG_HWCONFIG |
| /* |
| * These can be toggled for performance analysis, otherwise use default. |
| */ |
| #define CONFIG_L2_CACHE |
| #define CONFIG_BTB |
| |
| #define CONFIG_BOARD_EARLY_INIT_F /* Call board_pre_init */ |
| |
| #define CONFIG_ENABLE_36BIT_PHYS |
| |
| #ifdef CONFIG_PHYS_64BIT |
| #define CONFIG_ADDR_MAP 1 |
| #define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */ |
| #endif |
| |
| #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ |
| #define CONFIG_SYS_MEMTEST_END 0x1fffffff |
| #define CONFIG_PANIC_HANG /* do not reset board on panic */ |
| |
| #define CONFIG_SYS_CCSRBAR 0xffe00000 |
| #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR |
| |
| /* IN case of NAND bootloader relocate CCSRBAR in RAMboot code not in the 4k |
| SPL code*/ |
| #ifdef CONFIG_SPL_BUILD |
| #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE |
| #endif |
| |
| /* DDR Setup */ |
| #define CONFIG_SYS_FSL_DDR3 |
| #define CONFIG_SYS_DDR_RAW_TIMING |
| #define CONFIG_DDR_SPD |
| #define CONFIG_SYS_SPD_BUS_NUM 1 |
| #define SPD_EEPROM_ADDRESS 0x52 |
| #undef CONFIG_FSL_DDR_INTERACTIVE |
| |
| #if (defined(CONFIG_P1020MBG) || defined(CONFIG_P1020RDB_PD)) |
| #define CONFIG_SYS_SDRAM_SIZE_LAW LAW_SIZE_2G |
| #define CONFIG_CHIP_SELECTS_PER_CTRL 2 |
| #else |
| #define CONFIG_SYS_SDRAM_SIZE_LAW LAW_SIZE_1G |
| #define CONFIG_CHIP_SELECTS_PER_CTRL 1 |
| #endif |
| #define CONFIG_SYS_SDRAM_SIZE (1u << (CONFIG_SYS_SDRAM_SIZE_LAW - 19)) |
| #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 |
| #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE |
| |
| #define CONFIG_NUM_DDR_CONTROLLERS 1 |
| #define CONFIG_DIMM_SLOTS_PER_CTLR 1 |
| |
| /* Default settings for DDR3 */ |
| #ifndef CONFIG_P2020RDB |
| #define CONFIG_SYS_DDR_CS0_BNDS 0x0000003f |
| #define CONFIG_SYS_DDR_CS0_CONFIG 0x80014302 |
| #define CONFIG_SYS_DDR_CS0_CONFIG_2 0x00000000 |
| #define CONFIG_SYS_DDR_CS1_BNDS 0x0040007f |
| #define CONFIG_SYS_DDR_CS1_CONFIG 0x80014302 |
| #define CONFIG_SYS_DDR_CS1_CONFIG_2 0x00000000 |
| |
| #define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef |
| #define CONFIG_SYS_DDR_INIT_ADDR 0x00000000 |
| #define CONFIG_SYS_DDR_INIT_EXT_ADDR 0x00000000 |
| #define CONFIG_SYS_DDR_MODE_CONTROL 0x00000000 |
| |
| #define CONFIG_SYS_DDR_ZQ_CONTROL 0x89080600 |
| #define CONFIG_SYS_DDR_WRLVL_CONTROL 0x8655A608 |
| #define CONFIG_SYS_DDR_SR_CNTR 0x00000000 |
| #define CONFIG_SYS_DDR_RCW_1 0x00000000 |
| #define CONFIG_SYS_DDR_RCW_2 0x00000000 |
| #define CONFIG_SYS_DDR_CONTROL 0xC70C0000 /* Type = DDR3 */ |
| #define CONFIG_SYS_DDR_CONTROL_2 0x04401050 |
| #define CONFIG_SYS_DDR_TIMING_4 0x00220001 |
| #define CONFIG_SYS_DDR_TIMING_5 0x03402400 |
| |
| #define CONFIG_SYS_DDR_TIMING_3 0x00020000 |
| #define CONFIG_SYS_DDR_TIMING_0 0x00330004 |
| #define CONFIG_SYS_DDR_TIMING_1 0x6f6B4846 |
| #define CONFIG_SYS_DDR_TIMING_2 0x0FA8C8CF |
| #define CONFIG_SYS_DDR_CLK_CTRL 0x03000000 |
| #define CONFIG_SYS_DDR_MODE_1 0x40461520 |
| #define CONFIG_SYS_DDR_MODE_2 0x8000c000 |
| #define CONFIG_SYS_DDR_INTERVAL 0x0C300000 |
| #endif |
| |
| #undef CONFIG_CLOCKS_IN_MHZ |
| |
| /* |
| * Memory map |
| * |
| * 0x0000_0000 0x7fff_ffff DDR Up to 2GB cacheable |
| * 0x8000_0000 0xdfff_ffff PCI Express Mem 1.5G non-cacheable(PCIe * 3) |
| * 0xec00_0000 0xefff_ffff NOR flash Up to 64M non-cacheable CS0/1 |
| * 0xf8f8_0000 0xf8ff_ffff L2 SRAM Up to 512K cacheable |
| * (early boot only) |
| * 0xff80_0000 0xff80_7fff NAND flash 32K non-cacheable CS1/0 |
| * 0xff98_0000 0xff98_ffff PMC 64K non-cacheable CS2 |
| * 0xffa0_0000 0xffaf_ffff CPLD 1M non-cacheable CS3 |
| * 0xffb0_0000 0xffbf_ffff VSC7385 switch 1M non-cacheable CS2 |
| * 0xffc0_0000 0xffc3_ffff PCI IO range 256k non-cacheable |
| * 0xffd0_0000 0xffd0_3fff L1 for stack 16K cacheable |
| * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable |
| */ |
| |
| /* |
| * Local Bus Definitions |
| */ |
| #if (defined(CONFIG_P1020MBG) || defined(CONFIG_P1020RDB_PD)) |
| #define CONFIG_SYS_MAX_FLASH_SECT 512 /* 64M */ |
| #define CONFIG_SYS_FLASH_BASE 0xec000000 |
| #elif defined(CONFIG_P1020UTM) |
| #define CONFIG_SYS_MAX_FLASH_SECT 256 /* 32M */ |
| #define CONFIG_SYS_FLASH_BASE 0xee000000 |
| #else |
| #define CONFIG_SYS_MAX_FLASH_SECT 128 /* 16M */ |
| #define CONFIG_SYS_FLASH_BASE 0xef000000 |
| #endif |
| |
| #ifdef CONFIG_PHYS_64BIT |
| #define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) |
| #else |
| #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE |
| #endif |
| |
| #define CONFIG_FLASH_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \ |
| | BR_PS_16 | BR_V) |
| |
| #define CONFIG_FLASH_OR_PRELIM 0xfc000ff7 |
| |
| #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS} |
| #define CONFIG_SYS_FLASH_QUIET_TEST |
| #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ |
| |
| #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ |
| |
| #undef CONFIG_SYS_FLASH_CHECKSUM |
| #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ |
| #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ |
| |
| #define CONFIG_FLASH_CFI_DRIVER |
| #define CONFIG_SYS_FLASH_CFI |
| #define CONFIG_SYS_FLASH_EMPTY_INFO |
| #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE |
| |
| /* Nand Flash */ |
| #ifdef CONFIG_NAND_FSL_ELBC |
| #define CONFIG_SYS_NAND_BASE 0xff800000 |
| #ifdef CONFIG_PHYS_64BIT |
| #define CONFIG_SYS_NAND_BASE_PHYS 0xfff800000ull |
| #else |
| #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE |
| #endif |
| |
| #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } |
| #define CONFIG_SYS_MAX_NAND_DEVICE 1 |
| #define CONFIG_CMD_NAND |
| #if defined(CONFIG_P1020RDB_PD) |
| #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) |
| #else |
| #define CONFIG_SYS_NAND_BLOCK_SIZE (16 * 1024) |
| #endif |
| |
| #define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ |
| | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ |
| | BR_PS_8 /* Port Size = 8 bit */ \ |
| | BR_MS_FCM /* MSEL = FCM */ \ |
| | BR_V) /* valid */ |
| #if defined(CONFIG_P1020RDB_PD) |
| #define CONFIG_SYS_NAND_OR_PRELIM (OR_AM_32KB \ |
| | OR_FCM_PGS /* Large Page*/ \ |
| | OR_FCM_CSCT \ |
| | OR_FCM_CST \ |
| | OR_FCM_CHT \ |
| | OR_FCM_SCY_1 \ |
| | OR_FCM_TRLX \ |
| | OR_FCM_EHTR) |
| #else |
| #define CONFIG_SYS_NAND_OR_PRELIM (OR_AM_32KB /* small page */ \ |
| | OR_FCM_CSCT \ |
| | OR_FCM_CST \ |
| | OR_FCM_CHT \ |
| | OR_FCM_SCY_1 \ |
| | OR_FCM_TRLX \ |
| | OR_FCM_EHTR) |
| #endif |
| #endif /* CONFIG_NAND_FSL_ELBC */ |
| |
| #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ |
| |
| #define CONFIG_SYS_INIT_RAM_LOCK |
| #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* stack in RAM */ |
| #ifdef CONFIG_PHYS_64BIT |
| #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf |
| #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR |
| /* The assembler doesn't like typecast */ |
| #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ |
| ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ |
| CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) |
| #else |
| /* Initial L1 address */ |
| #define CONFIG_SYS_INIT_RAM_ADDR_PHYS CONFIG_SYS_INIT_RAM_ADDR |
| #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 |
| #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS |
| #endif |
| /* Size of used area in RAM */ |
| #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 |
| |
| #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ |
| GENERATED_GBL_DATA_SIZE) |
| #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET |
| |
| #define CONFIG_SYS_MONITOR_LEN (768 * 1024) |
| #define CONFIG_SYS_MALLOC_LEN (1024 * 1024)/* Reserved for malloc */ |
| |
| #define CONFIG_SYS_CPLD_BASE 0xffa00000 |
| #ifdef CONFIG_PHYS_64BIT |
| #define CONFIG_SYS_CPLD_BASE_PHYS 0xfffa00000ull |
| #else |
| #define CONFIG_SYS_CPLD_BASE_PHYS CONFIG_SYS_CPLD_BASE |
| #endif |
| /* CPLD config size: 1Mb */ |
| #define CONFIG_CPLD_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) | \ |
| BR_PS_8 | BR_V) |
| #define CONFIG_CPLD_OR_PRELIM (0xfff009f7) |
| |
| #define CONFIG_SYS_PMC_BASE 0xff980000 |
| #define CONFIG_SYS_PMC_BASE_PHYS CONFIG_SYS_PMC_BASE |
| #define CONFIG_PMC_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_PMC_BASE_PHYS) | \ |
| BR_PS_8 | BR_V) |
| #define CONFIG_PMC_OR_PRELIM (OR_AM_64KB | OR_GPCM_CSNT | OR_GPCM_XACS | \ |
| OR_GPCM_SCY | OR_GPCM_TRLX | OR_GPCM_EHTR | \ |
| OR_GPCM_EAD) |
| |
| #ifdef CONFIG_NAND |
| #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Addr */ |
| #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ |
| #define CONFIG_SYS_BR1_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ |
| #define CONFIG_SYS_OR1_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ |
| #else |
| #define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ |
| #define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ |
| #ifdef CONFIG_NAND_FSL_ELBC |
| #define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Addr */ |
| #define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ |
| #endif |
| #endif |
| #define CONFIG_SYS_BR3_PRELIM CONFIG_CPLD_BR_PRELIM /* CPLD Base Address */ |
| #define CONFIG_SYS_OR3_PRELIM CONFIG_CPLD_OR_PRELIM /* CPLD Options */ |
| |
| /* Vsc7385 switch */ |
| #ifdef CONFIG_VSC7385_ENET |
| #define CONFIG_SYS_VSC7385_BASE 0xffb00000 |
| |
| #ifdef CONFIG_PHYS_64BIT |
| #define CONFIG_SYS_VSC7385_BASE_PHYS 0xfffb00000ull |
| #else |
| #define CONFIG_SYS_VSC7385_BASE_PHYS CONFIG_SYS_VSC7385_BASE |
| #endif |
| |
| #define CONFIG_SYS_VSC7385_BR_PRELIM \ |
| (BR_PHYS_ADDR(CONFIG_SYS_VSC7385_BASE_PHYS) | BR_PS_8 | BR_V) |
| #define CONFIG_SYS_VSC7385_OR_PRELIM (OR_AM_128KB | OR_GPCM_CSNT | \ |
| OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_SETA | \ |
| OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD) |
| |
| #define CONFIG_SYS_BR2_PRELIM CONFIG_SYS_VSC7385_BR_PRELIM |
| #define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_VSC7385_OR_PRELIM |
| |
| /* The size of the VSC7385 firmware image */ |
| #define CONFIG_VSC7385_IMAGE_SIZE 8192 |
| #endif |
| |
| /* |
| * Config the L2 Cache as L2 SRAM |
| */ |
| #if defined(CONFIG_SPL_BUILD) |
| #if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH) |
| #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 |
| #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR |
| #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) |
| #define CONFIG_SPL_RELOC_TEXT_BASE 0xf8f81000 |
| #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 112 * 1024) |
| #define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 116 * 1024) |
| #define CONFIG_SPL_RELOC_STACK_SIZE (32 << 10) |
| #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 148 * 1024) |
| #if defined(CONFIG_P2020RDB) |
| #define CONFIG_SPL_RELOC_MALLOC_SIZE (364 << 10) |
| #else |
| #define CONFIG_SPL_RELOC_MALLOC_SIZE (108 << 10) |
| #endif |
| #elif defined(CONFIG_NAND) |
| #ifdef CONFIG_TPL_BUILD |
| #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 |
| #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR |
| #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) |
| #define CONFIG_SPL_RELOC_TEXT_BASE 0xf8f81000 |
| #define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 192 * 1024) |
| #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 208 * 1024) |
| #define CONFIG_SPL_RELOC_MALLOC_SIZE (48 << 10) |
| #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 176 * 1024) |
| #else |
| #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 |
| #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR |
| #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) |
| #define CONFIG_SPL_RELOC_TEXT_BASE (CONFIG_SYS_INIT_L2_END - 0x2000) |
| #define CONFIG_SPL_RELOC_STACK ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF) |
| #endif /* CONFIG_TPL_BUILD */ |
| #endif |
| #endif |
| |
| /* Serial Port - controlled on board with jumper J8 |
| * open - index 2 |
| * shorted - index 1 |
| */ |
| #define CONFIG_CONS_INDEX 1 |
| #undef CONFIG_SERIAL_SOFTWARE_FIFO |
| #define CONFIG_SYS_NS16550_SERIAL |
| #define CONFIG_SYS_NS16550_REG_SIZE 1 |
| #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) |
| #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL) |
| #define CONFIG_NS16550_MIN_FUNCTIONS |
| #endif |
| |
| #define CONFIG_SYS_BAUDRATE_TABLE \ |
| {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} |
| |
| #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) |
| #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) |
| |
| /* I2C */ |
| #define CONFIG_SYS_I2C |
| #define CONFIG_SYS_I2C_FSL |
| #define CONFIG_SYS_FSL_I2C_SPEED 400000 |
| #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F |
| #define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 |
| #define CONFIG_SYS_FSL_I2C2_SPEED 400000 |
| #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F |
| #define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 |
| #define CONFIG_SYS_I2C_NOPROBES { {0, 0x29} } |
| #define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 |
| #define CONFIG_SYS_SPD_BUS_NUM 1 /* For rom_loc and flash bank */ |
| |
| /* |
| * I2C2 EEPROM |
| */ |
| #undef CONFIG_ID_EEPROM |
| |
| #define CONFIG_RTC_PT7C4338 |
| #define CONFIG_SYS_I2C_RTC_ADDR 0x68 |
| #define CONFIG_SYS_I2C_PCA9557_ADDR 0x18 |
| |
| /* enable read and write access to EEPROM */ |
| #define CONFIG_CMD_EEPROM |
| #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 |
| #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 |
| #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 |
| |
| /* |
| * eSPI - Enhanced SPI |
| */ |
| #define CONFIG_HARD_SPI |
| |
| #if defined(CONFIG_SPI_FLASH) |
| #define CONFIG_SF_DEFAULT_SPEED 10000000 |
| #define CONFIG_SF_DEFAULT_MODE 0 |
| #endif |
| |
| #if defined(CONFIG_PCI) |
| /* |
| * General PCI |
| * Memory space is mapped 1-1, but I/O space must start from 0. |
| */ |
| |
| /* controller 2, direct to uli, tgtid 2, Base address 9000 */ |
| #define CONFIG_SYS_PCIE2_NAME "PCIe SLOT" |
| #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 |
| #ifdef CONFIG_PHYS_64BIT |
| #define CONFIG_SYS_PCIE2_MEM_BUS 0xc0000000 |
| #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull |
| #else |
| #define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 |
| #define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 |
| #endif |
| #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ |
| #define CONFIG_SYS_PCIE2_IO_VIRT 0xffc10000 |
| #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 |
| #ifdef CONFIG_PHYS_64BIT |
| #define CONFIG_SYS_PCIE2_IO_PHYS 0xfffc10000ull |
| #else |
| #define CONFIG_SYS_PCIE2_IO_PHYS 0xffc10000 |
| #endif |
| #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ |
| |
| /* controller 1, Slot 2, tgtid 1, Base address a000 */ |
| #define CONFIG_SYS_PCIE1_NAME "mini PCIe SLOT" |
| #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 |
| #ifdef CONFIG_PHYS_64BIT |
| #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 |
| #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull |
| #else |
| #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 |
| #define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000 |
| #endif |
| #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ |
| #define CONFIG_SYS_PCIE1_IO_VIRT 0xffc00000 |
| #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 |
| #ifdef CONFIG_PHYS_64BIT |
| #define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc00000ull |
| #else |
| #define CONFIG_SYS_PCIE1_IO_PHYS 0xffc00000 |
| #endif |
| #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ |
| |
| #define CONFIG_PCI_PNP /* do pci plug-and-play */ |
| #define CONFIG_CMD_PCI |
| |
| #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ |
| #define CONFIG_DOS_PARTITION |
| #endif /* CONFIG_PCI */ |
| |
| #if defined(CONFIG_TSEC_ENET) |
| #define CONFIG_MII /* MII PHY management */ |
| #define CONFIG_TSEC1 |
| #define CONFIG_TSEC1_NAME "eTSEC1" |
| #define CONFIG_TSEC2 |
| #define CONFIG_TSEC2_NAME "eTSEC2" |
| #define CONFIG_TSEC3 |
| #define CONFIG_TSEC3_NAME "eTSEC3" |
| |
| #define TSEC1_PHY_ADDR 2 |
| #define TSEC2_PHY_ADDR 0 |
| #define TSEC3_PHY_ADDR 1 |
| |
| #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) |
| #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) |
| #define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) |
| |
| #define TSEC1_PHYIDX 0 |
| #define TSEC2_PHYIDX 0 |
| #define TSEC3_PHYIDX 0 |
| |
| #define CONFIG_ETHPRIME "eTSEC1" |
| |
| #define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ |
| |
| #define CONFIG_HAS_ETH0 |
| #define CONFIG_HAS_ETH1 |
| #define CONFIG_HAS_ETH2 |
| #endif /* CONFIG_TSEC_ENET */ |
| |
| #ifdef CONFIG_QE |
| /* QE microcode/firmware address */ |
| #define CONFIG_SYS_QE_FMAN_FW_IN_NOR |
| #define CONFIG_SYS_QE_FW_ADDR 0xefec0000 |
| #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 |
| #endif /* CONFIG_QE */ |
| |
| #ifdef CONFIG_P1025RDB |
| /* |
| * QE UEC ethernet configuration |
| */ |
| #define CONFIG_MIIM_ADDRESS (CONFIG_SYS_CCSRBAR + 0x82120) |
| |
| #undef CONFIG_UEC_ETH |
| #define CONFIG_PHY_MODE_NEED_CHANGE |
| |
| #define CONFIG_UEC_ETH1 /* ETH1 */ |
| #define CONFIG_HAS_ETH0 |
| |
| #ifdef CONFIG_UEC_ETH1 |
| #define CONFIG_SYS_UEC1_UCC_NUM 0 /* UCC1 */ |
| #define CONFIG_SYS_UEC1_RX_CLK QE_CLK12 /* CLK12 for MII */ |
| #define CONFIG_SYS_UEC1_TX_CLK QE_CLK9 /* CLK9 for MII */ |
| #define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH |
| #define CONFIG_SYS_UEC1_PHY_ADDR 0x0 /* 0x0 for MII */ |
| #define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII |
| #define CONFIG_SYS_UEC1_INTERFACE_SPEED 100 |
| #endif /* CONFIG_UEC_ETH1 */ |
| |
| #define CONFIG_UEC_ETH5 /* ETH5 */ |
| #define CONFIG_HAS_ETH1 |
| |
| #ifdef CONFIG_UEC_ETH5 |
| #define CONFIG_SYS_UEC5_UCC_NUM 4 /* UCC5 */ |
| #define CONFIG_SYS_UEC5_RX_CLK QE_CLK_NONE |
| #define CONFIG_SYS_UEC5_TX_CLK QE_CLK13 /* CLK 13 for RMII */ |
| #define CONFIG_SYS_UEC5_ETH_TYPE FAST_ETH |
| #define CONFIG_SYS_UEC5_PHY_ADDR 0x3 /* 0x3 for RMII */ |
| #define CONFIG_SYS_UEC5_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII |
| #define CONFIG_SYS_UEC5_INTERFACE_SPEED 100 |
| #endif /* CONFIG_UEC_ETH5 */ |
| #endif /* CONFIG_P1025RDB */ |
| |
| /* |
| * Environment |
| */ |
| #ifdef CONFIG_SPIFLASH |
| #define CONFIG_ENV_IS_IN_SPI_FLASH |
| #define CONFIG_ENV_SPI_BUS 0 |
| #define CONFIG_ENV_SPI_CS 0 |
| #define CONFIG_ENV_SPI_MAX_HZ 10000000 |
| #define CONFIG_ENV_SPI_MODE 0 |
| #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ |
| #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ |
| #define CONFIG_ENV_SECT_SIZE 0x10000 |
| #elif defined(CONFIG_SDCARD) |
| #define CONFIG_ENV_IS_IN_MMC |
| #define CONFIG_FSL_FIXED_MMC_LOCATION |
| #define CONFIG_ENV_SIZE 0x2000 |
| #define CONFIG_SYS_MMC_ENV_DEV 0 |
| #elif defined(CONFIG_NAND) |
| #ifdef CONFIG_TPL_BUILD |
| #define CONFIG_ENV_SIZE 0x2000 |
| #define CONFIG_ENV_ADDR (CONFIG_SYS_INIT_L2_ADDR + (160 << 10)) |
| #else |
| #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE |
| #endif |
| #define CONFIG_ENV_IS_IN_NAND |
| #define CONFIG_ENV_OFFSET (1024 * 1024) |
| #define CONFIG_ENV_RANGE (3 * CONFIG_ENV_SIZE) |
| #elif defined(CONFIG_SYS_RAMBOOT) |
| #define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */ |
| #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) |
| #define CONFIG_ENV_SIZE 0x2000 |
| #else |
| #define CONFIG_ENV_IS_IN_FLASH |
| #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) |
| #define CONFIG_ENV_SIZE 0x2000 |
| #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ |
| #endif |
| |
| #define CONFIG_LOADS_ECHO /* echo on for serial download */ |
| #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ |
| |
| /* |
| * Command line configuration. |
| */ |
| #define CONFIG_CMD_IRQ |
| #define CONFIG_CMD_MII |
| #define CONFIG_CMD_DATE |
| #define CONFIG_CMD_REGINFO |
| |
| /* |
| * USB |
| */ |
| #define CONFIG_HAS_FSL_DR_USB |
| |
| #if defined(CONFIG_HAS_FSL_DR_USB) |
| #define CONFIG_USB_EHCI |
| |
| #ifdef CONFIG_USB_EHCI |
| #define CONFIG_EHCI_HCD_INIT_AFTER_RESET |
| #define CONFIG_USB_EHCI_FSL |
| #define CONFIG_USB_STORAGE |
| #endif |
| #endif |
| |
| #if defined(CONFIG_P1020RDB_PD) |
| #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 |
| #endif |
| |
| #define CONFIG_MMC |
| |
| #ifdef CONFIG_MMC |
| #define CONFIG_FSL_ESDHC |
| #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR |
| #define CONFIG_CMD_MMC |
| #define CONFIG_GENERIC_MMC |
| #endif |
| |
| #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI) \ |
| || defined(CONFIG_FSL_SATA) |
| #define CONFIG_CMD_EXT2 |
| #define CONFIG_CMD_FAT |
| #define CONFIG_DOS_PARTITION |
| #endif |
| |
| #undef CONFIG_WATCHDOG /* watchdog disabled */ |
| |
| /* |
| * Miscellaneous configurable options |
| */ |
| #define CONFIG_SYS_LONGHELP /* undef to save memory */ |
| #define CONFIG_CMDLINE_EDITING /* Command-line editing */ |
| #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ |
| #if defined(CONFIG_CMD_KGDB) |
| #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ |
| #else |
| #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ |
| #endif |
| #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) |
| /* Print Buffer Size */ |
| #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ |
| #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ |
| |
| /* |
| * For booting Linux, the board info and command line data |
| * have to be in the first 64 MB of memory, since this is |
| * the maximum mapped by the Linux kernel during initialization. |
| */ |
| #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory for Linux*/ |
| #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ |
| |
| #if defined(CONFIG_CMD_KGDB) |
| #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ |
| #endif |
| |
| /* |
| * Environment Configuration |
| */ |
| #define CONFIG_HOSTNAME unknown |
| #define CONFIG_ROOTPATH "/opt/nfsroot" |
| #define CONFIG_BOOTFILE "uImage" |
| #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ |
| |
| /* default location for tftp and bootm */ |
| #define CONFIG_LOADADDR 1000000 |
| |
| #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ |
| #define CONFIG_BOOTARGS /* the boot command will set bootargs */ |
| |
| #define CONFIG_BAUDRATE 115200 |
| |
| #ifdef __SW_BOOT_NOR |
| #define __NOR_RST_CMD \ |
| norboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_NOR 1; \ |
| i2c mw 18 3 __SW_BOOT_MASK 1; reset |
| #endif |
| #ifdef __SW_BOOT_SPI |
| #define __SPI_RST_CMD \ |
| spiboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_SPI 1; \ |
| i2c mw 18 3 __SW_BOOT_MASK 1; reset |
| #endif |
| #ifdef __SW_BOOT_SD |
| #define __SD_RST_CMD \ |
| sdboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_SD 1; \ |
| i2c mw 18 3 __SW_BOOT_MASK 1; reset |
| #endif |
| #ifdef __SW_BOOT_NAND |
| #define __NAND_RST_CMD \ |
| nandboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_NAND 1; \ |
| i2c mw 18 3 __SW_BOOT_MASK 1; reset |
| #endif |
| #ifdef __SW_BOOT_PCIE |
| #define __PCIE_RST_CMD \ |
| pciboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_PCIE 1; \ |
| i2c mw 18 3 __SW_BOOT_MASK 1; reset |
| #endif |
| |
| #define CONFIG_EXTRA_ENV_SETTINGS \ |
| "netdev=eth0\0" \ |
| "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ |
| "loadaddr=1000000\0" \ |
| "bootfile=uImage\0" \ |
| "tftpflash=tftpboot $loadaddr $uboot; " \ |
| "protect off " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ |
| "erase " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ |
| "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) " $filesize; " \ |
| "protect on " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ |
| "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) " $filesize\0" \ |
| "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0" \ |
| "consoledev=ttyS0\0" \ |
| "ramdiskaddr=2000000\0" \ |
| "ramdiskfile=rootfs.ext2.gz.uboot\0" \ |
| "fdtaddr=c00000\0" \ |
| "bdev=sda1\0" \ |
| "jffs2nor=mtdblock3\0" \ |
| "norbootaddr=ef080000\0" \ |
| "norfdtaddr=ef040000\0" \ |
| "jffs2nand=mtdblock9\0" \ |
| "nandbootaddr=100000\0" \ |
| "nandfdtaddr=80000\0" \ |
| "ramdisk_size=120000\0" \ |
| "map_lowernorbank=i2c dev 1; i2c mw 18 1 02 1; i2c mw 18 3 fd 1\0" \ |
| "map_uppernorbank=i2c dev 1; i2c mw 18 1 00 1; i2c mw 18 3 fd 1\0" \ |
| __stringify(__NOR_RST_CMD)"\0" \ |
| __stringify(__SPI_RST_CMD)"\0" \ |
| __stringify(__SD_RST_CMD)"\0" \ |
| __stringify(__NAND_RST_CMD)"\0" \ |
| __stringify(__PCIE_RST_CMD)"\0" |
| |
| #define CONFIG_NFSBOOTCOMMAND \ |
| "setenv bootargs root=/dev/nfs rw " \ |
| "nfsroot=$serverip:$rootpath " \ |
| "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ |
| "console=$consoledev,$baudrate $othbootargs;" \ |
| "tftp $loadaddr $bootfile;" \ |
| "tftp $fdtaddr $fdtfile;" \ |
| "bootm $loadaddr - $fdtaddr" |
| |
| #define CONFIG_HDBOOT \ |
| "setenv bootargs root=/dev/$bdev rw rootdelay=30 " \ |
| "console=$consoledev,$baudrate $othbootargs;" \ |
| "usb start;" \ |
| "ext2load usb 0:1 $loadaddr /boot/$bootfile;" \ |
| "ext2load usb 0:1 $fdtaddr /boot/$fdtfile;" \ |
| "bootm $loadaddr - $fdtaddr" |
| |
| #define CONFIG_USB_FAT_BOOT \ |
| "setenv bootargs root=/dev/ram rw " \ |
| "console=$consoledev,$baudrate $othbootargs " \ |
| "ramdisk_size=$ramdisk_size;" \ |
| "usb start;" \ |
| "fatload usb 0:2 $loadaddr $bootfile;" \ |
| "fatload usb 0:2 $fdtaddr $fdtfile;" \ |
| "fatload usb 0:2 $ramdiskaddr $ramdiskfile;" \ |
| "bootm $loadaddr $ramdiskaddr $fdtaddr" |
| |
| #define CONFIG_USB_EXT2_BOOT \ |
| "setenv bootargs root=/dev/ram rw " \ |
| "console=$consoledev,$baudrate $othbootargs " \ |
| "ramdisk_size=$ramdisk_size;" \ |
| "usb start;" \ |
| "ext2load usb 0:4 $loadaddr $bootfile;" \ |
| "ext2load usb 0:4 $fdtaddr $fdtfile;" \ |
| "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;" \ |
| "bootm $loadaddr $ramdiskaddr $fdtaddr" |
| |
| #define CONFIG_NORBOOT \ |
| "setenv bootargs root=/dev/$jffs2nor rw " \ |
| "console=$consoledev,$baudrate rootfstype=jffs2 $othbootargs;" \ |
| "bootm $norbootaddr - $norfdtaddr" |
| |
| #define CONFIG_RAMBOOTCOMMAND \ |
| "setenv bootargs root=/dev/ram rw " \ |
| "console=$consoledev,$baudrate $othbootargs " \ |
| "ramdisk_size=$ramdisk_size;" \ |
| "tftp $ramdiskaddr $ramdiskfile;" \ |
| "tftp $loadaddr $bootfile;" \ |
| "tftp $fdtaddr $fdtfile;" \ |
| "bootm $loadaddr $ramdiskaddr $fdtaddr" |
| |
| #define CONFIG_BOOTCOMMAND CONFIG_HDBOOT |
| |
| #endif /* __CONFIG_H */ |