| /* |
| * (C) Copyright 2009 |
| * Marvell Semiconductor <www.marvell.com> |
| * Written-by: Prafulla Wadaskar <prafulla@marvell.com> |
| * |
| * Header file for the Marvell's Feroceon CPU core. |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #ifndef _MVEBU_SOC_H |
| #define _MVEBU_SOC_H |
| |
| #define SOC_MV78460_ID 0x7846 |
| #define SOC_88F6810_ID 0x6810 |
| #define SOC_88F6820_ID 0x6820 |
| #define SOC_88F6828_ID 0x6828 |
| |
| /* A38x revisions */ |
| #define MV_88F68XX_Z1_ID 0x0 |
| #define MV_88F68XX_A0_ID 0x4 |
| |
| /* TCLK Core Clock definition */ |
| #ifndef CONFIG_SYS_TCLK |
| #define CONFIG_SYS_TCLK 250000000 /* 250MHz */ |
| #endif |
| |
| /* Armada XP PLL frequency (used for NAND clock generation) */ |
| #define CONFIG_SYS_MVEBU_PLL_CLOCK 2000000000 |
| |
| /* SOC specific definations */ |
| #define INTREG_BASE 0xd0000000 |
| #define INTREG_BASE_ADDR_REG (INTREG_BASE + 0x20080) |
| #if defined(CONFIG_SPL_BUILD) |
| /* |
| * On A38x switching the regs base address without running from |
| * SDRAM doesn't seem to work. So let the SPL still use the |
| * default base address and switch to the new address in the |
| * main u-boot later. |
| */ |
| #define SOC_REGS_PHY_BASE 0xd0000000 |
| #else |
| #define SOC_REGS_PHY_BASE 0xf1000000 |
| #endif |
| #define MVEBU_REGISTER(x) (SOC_REGS_PHY_BASE + x) |
| |
| #define MVEBU_SDRAM_SCRATCH (MVEBU_REGISTER(0x01504)) |
| #define MVEBU_L2_CACHE_BASE (MVEBU_REGISTER(0x08000)) |
| #define CONFIG_SYS_PL310_BASE MVEBU_L2_CACHE_BASE |
| #define MVEBU_TWSI_BASE (MVEBU_REGISTER(0x11000)) |
| #define MVEBU_MPP_BASE (MVEBU_REGISTER(0x18000)) |
| #define MVEBU_GPIO0_BASE (MVEBU_REGISTER(0x18100)) |
| #define MVEBU_GPIO1_BASE (MVEBU_REGISTER(0x18140)) |
| #define MVEBU_GPIO2_BASE (MVEBU_REGISTER(0x18180)) |
| #define MVEBU_SYSTEM_REG_BASE (MVEBU_REGISTER(0x18200)) |
| #define MVEBU_CLOCK_BASE (MVEBU_REGISTER(0x18700)) |
| #define MVEBU_CPU_WIN_BASE (MVEBU_REGISTER(0x20000)) |
| #define MVEBU_SDRAM_BASE (MVEBU_REGISTER(0x20180)) |
| #define MVEBU_TIMER_BASE (MVEBU_REGISTER(0x20300)) |
| #define MVEBU_REG_PCIE_BASE (MVEBU_REGISTER(0x40000)) |
| #define MVEBU_AXP_USB_BASE (MVEBU_REGISTER(0x50000)) |
| #define MVEBU_USB20_BASE (MVEBU_REGISTER(0x58000)) |
| #define MVEBU_AXP_SATA_BASE (MVEBU_REGISTER(0xa0000)) |
| #define MVEBU_SATA0_BASE (MVEBU_REGISTER(0xa8000)) |
| #define MVEBU_NAND_BASE (MVEBU_REGISTER(0xd0000)) |
| #define MVEBU_SDIO_BASE (MVEBU_REGISTER(0xd8000)) |
| |
| #define SOC_COHERENCY_FABRIC_CTRL_REG (MVEBU_REGISTER(0x20200)) |
| #define MBUS_ERR_PROP_EN (1 << 8) |
| |
| #define MBUS_BRIDGE_WIN_CTRL_REG (MVEBU_REGISTER(0x20250)) |
| #define MBUS_BRIDGE_WIN_BASE_REG (MVEBU_REGISTER(0x20254)) |
| |
| #define MVEBU_SOC_DEV_MUX_REG (MVEBU_SYSTEM_REG_BASE + 0x08) |
| #define NAND_EN BIT(0) |
| #define NAND_ARBITER_EN BIT(27) |
| |
| #define ARMADA_XP_PUP_ENABLE (MVEBU_SYSTEM_REG_BASE + 0x44c) |
| #define GE0_PUP_EN BIT(0) |
| #define GE1_PUP_EN BIT(1) |
| #define LCD_PUP_EN BIT(2) |
| #define NAND_PUP_EN BIT(4) |
| #define SPI_PUP_EN BIT(5) |
| |
| #define MVEBU_CORE_DIV_CLK_CTRL(i) (MVEBU_CLOCK_BASE + ((i) * 0x8)) |
| #define NAND_ECC_DIVCKL_RATIO_OFFS 8 |
| #define NAND_ECC_DIVCKL_RATIO_MASK (0x3F << NAND_ECC_DIVCKL_RATIO_OFFS) |
| |
| #define SDRAM_MAX_CS 4 |
| #define SDRAM_ADDR_MASK 0xFF000000 |
| |
| /* MVEBU CPU memory windows */ |
| #define MVCPU_WIN_CTRL_DATA CPU_WIN_CTRL_DATA |
| #define MVCPU_WIN_ENABLE CPU_WIN_ENABLE |
| #define MVCPU_WIN_DISABLE CPU_WIN_DISABLE |
| |
| #endif /* _MVEBU_SOC_H */ |