| /* |
| * (C) Copyright 2001 |
| * Denis Peter, MPL AG Switzerland |
| * |
| * Most of this source has been derived from the Linux USB |
| * project. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| * |
| */ |
| |
| #include <common.h> |
| #include <command.h> |
| #include <asm/byteorder.h> |
| |
| #if (CONFIG_COMMANDS & CFG_CMD_USB) |
| |
| #include <usb.h> |
| |
| #ifdef CONFIG_USB_STORAGE |
| static int usb_stor_curr_dev=-1; /* current device */ |
| #endif |
| |
| /* some display routines (info command) */ |
| char * usb_get_class_desc(unsigned char dclass) |
| { |
| switch(dclass) { |
| case USB_CLASS_PER_INTERFACE: |
| return("See Interface"); |
| case USB_CLASS_AUDIO: |
| return("Audio"); |
| case USB_CLASS_COMM: |
| return("Communication"); |
| case USB_CLASS_HID: |
| return("Human Interface"); |
| case USB_CLASS_PRINTER: |
| return("Printer"); |
| case USB_CLASS_MASS_STORAGE: |
| return("Mass Storage"); |
| case USB_CLASS_HUB: |
| return("Hub"); |
| case USB_CLASS_DATA: |
| return("CDC Data"); |
| case USB_CLASS_VENDOR_SPEC: |
| return("Vendor specific"); |
| default : |
| return(""); |
| } |
| } |
| |
| void usb_display_class_sub(unsigned char dclass,unsigned char subclass,unsigned char proto) |
| { |
| switch(dclass) { |
| case USB_CLASS_PER_INTERFACE: |
| printf("See Interface"); |
| break; |
| case USB_CLASS_HID: |
| printf("Human Interface, Subclass: "); |
| switch(subclass) { |
| case USB_SUB_HID_NONE: |
| printf("None"); |
| break; |
| case USB_SUB_HID_BOOT: |
| printf("Boot "); |
| switch(proto) { |
| case USB_PROT_HID_NONE: |
| printf("None"); |
| break; |
| case USB_PROT_HID_KEYBOARD: |
| printf("Keyboard"); |
| break; |
| case USB_PROT_HID_MOUSE: |
| printf("Mouse"); |
| break; |
| default: |
| printf("reserved"); |
| } |
| break; |
| default: |
| printf("reserved"); |
| } |
| break; |
| case USB_CLASS_MASS_STORAGE: |
| printf("Mass Storage, "); |
| switch(subclass) { |
| case US_SC_RBC: |
| printf("RBC "); |
| break; |
| case US_SC_8020: |
| printf("SFF-8020i (ATAPI)"); |
| break; |
| case US_SC_QIC: |
| printf("QIC-157 (Tape)"); |
| break; |
| case US_SC_UFI: |
| printf("UFI"); |
| break; |
| case US_SC_8070: |
| printf("SFF-8070"); |
| break; |
| case US_SC_SCSI: |
| printf("Transp. SCSI"); |
| break; |
| default: |
| printf("reserved"); |
| break; |
| } |
| printf(", "); |
| switch(proto) { |
| case US_PR_CB: |
| printf("Command/Bulk"); |
| break; |
| case US_PR_CBI: |
| printf("Command/Bulk/Int"); |
| break; |
| case US_PR_BULK: |
| printf("Bulk only"); |
| break; |
| default: |
| printf("reserved"); |
| } |
| break; |
| default: |
| printf("%s",usb_get_class_desc(dclass)); |
| } |
| } |
| |
| void usb_display_string(struct usb_device *dev,int index) |
| { |
| char buffer[256]; |
| if (index!=0) { |
| if (usb_string(dev,index,&buffer[0],256)>0); |
| printf("String: \"%s\"",buffer); |
| } |
| } |
| |
| void usb_display_desc(struct usb_device *dev) |
| { |
| if (dev->descriptor.bDescriptorType==USB_DT_DEVICE) { |
| printf("%d: %s, USB Revision %x.%x\n",dev->devnum,usb_get_class_desc(dev->config.if_desc[0].bInterfaceClass), |
| (dev->descriptor.bcdUSB>>8) & 0xff,dev->descriptor.bcdUSB & 0xff); |
| if (strlen(dev->mf) || strlen(dev->prod) || strlen(dev->serial)) |
| printf(" - %s %s %s\n",dev->mf,dev->prod,dev->serial); |
| if (dev->descriptor.bDeviceClass) { |
| printf(" - Class: "); |
| usb_display_class_sub(dev->descriptor.bDeviceClass,dev->descriptor.bDeviceSubClass,dev->descriptor.bDeviceProtocol); |
| printf("\n"); |
| } |
| else { |
| printf(" - Class: (from Interface) %s\n",usb_get_class_desc(dev->config.if_desc[0].bInterfaceClass)); |
| } |
| printf(" - PacketSize: %d Configurations: %d\n",dev->descriptor.bMaxPacketSize0,dev->descriptor.bNumConfigurations); |
| printf(" - Vendor: 0x%04x Product 0x%04x Version %d.%d\n",dev->descriptor.idVendor,dev->descriptor.idProduct,(dev->descriptor.bcdDevice>>8) & 0xff,dev->descriptor.bcdDevice & 0xff); |
| } |
| |
| } |
| |
| void usb_display_conf_desc(struct usb_config_descriptor *config,struct usb_device *dev) |
| { |
| printf(" Configuration: %d\n",config->bConfigurationValue); |
| printf(" - Interfaces: %d %s%s%dmA\n",config->bNumInterfaces,(config->bmAttributes & 0x40) ? "Self Powered " : "Bus Powered ", |
| (config->bmAttributes & 0x20) ? "Remote Wakeup " : "",config->MaxPower*2); |
| if (config->iConfiguration) { |
| printf(" - "); |
| usb_display_string(dev,config->iConfiguration); |
| printf("\n"); |
| } |
| } |
| |
| void usb_display_if_desc(struct usb_interface_descriptor *ifdesc,struct usb_device *dev) |
| { |
| printf(" Interface: %d\n",ifdesc->bInterfaceNumber); |
| printf(" - Alternate Settings %d, Endpoints: %d\n",ifdesc->bAlternateSetting,ifdesc->bNumEndpoints); |
| printf(" - Class "); |
| usb_display_class_sub(ifdesc->bInterfaceClass,ifdesc->bInterfaceSubClass,ifdesc->bInterfaceProtocol); |
| printf("\n"); |
| if (ifdesc->iInterface) { |
| printf(" - "); |
| usb_display_string(dev,ifdesc->iInterface); |
| printf("\n"); |
| } |
| } |
| |
| void usb_display_ep_desc(struct usb_endpoint_descriptor *epdesc) |
| { |
| printf(" - Endpoint %d %s ",epdesc->bEndpointAddress & 0xf,(epdesc->bEndpointAddress & 0x80) ? "In" : "Out"); |
| switch((epdesc->bmAttributes & 0x03)) |
| { |
| case 0: printf("Control"); break; |
| case 1: printf("Isochronous"); break; |
| case 2: printf("Bulk"); break; |
| case 3: printf("Interrupt"); break; |
| } |
| printf(" MaxPacket %d",epdesc->wMaxPacketSize); |
| if ((epdesc->bmAttributes & 0x03)==0x3) |
| printf(" Interval %dms",epdesc->bInterval); |
| printf("\n"); |
| } |
| |
| /* main routine to diasplay the configs, interfaces and endpoints */ |
| void usb_display_config(struct usb_device *dev) |
| { |
| struct usb_config_descriptor *config; |
| struct usb_interface_descriptor *ifdesc; |
| struct usb_endpoint_descriptor *epdesc; |
| int i,ii; |
| |
| config= &dev->config; |
| usb_display_conf_desc(config,dev); |
| for(i=0;i<config->no_of_if;i++) { |
| ifdesc= &config->if_desc[i]; |
| usb_display_if_desc(ifdesc,dev); |
| for(ii=0;ii<ifdesc->no_of_ep;ii++) { |
| epdesc= &ifdesc->ep_desc[ii]; |
| usb_display_ep_desc(epdesc); |
| } |
| } |
| printf("\n"); |
| } |
| |
| /* shows the device tree recursively */ |
| void usb_show_tree_graph(struct usb_device *dev,char *pre) |
| { |
| int i,index; |
| int has_child,last_child,port; |
| |
| index=strlen(pre); |
| printf(" %s",pre); |
| /* check if the device has connected children */ |
| has_child=0; |
| for(i=0;i<dev->maxchild;i++) { |
| if (dev->children[i]!=NULL) |
| has_child=1; |
| } |
| /* check if we are the last one */ |
| last_child=1; |
| if (dev->parent!=NULL) { |
| for(i=0;i<dev->parent->maxchild;i++) { |
| /* search for children */ |
| if (dev->parent->children[i]==dev) { |
| /* found our pointer, see if we have a little sister */ |
| port=i; |
| while(i++<dev->parent->maxchild) { |
| if (dev->parent->children[i]!=NULL) { |
| /* found a sister */ |
| last_child=0; |
| break; |
| } /* if */ |
| } /* while */ |
| } /* device found */ |
| } /* for all children of the parent */ |
| printf("\b+-"); |
| /* correct last child */ |
| if (last_child) { |
| pre[index-1]=' '; |
| } |
| } /* if not root hub */ |
| else |
| printf(" "); |
| printf("%d ",dev->devnum); |
| pre[index++]=' '; |
| pre[index++]= has_child ? '|' : ' '; |
| pre[index]=0; |
| printf(" %s (%s, %dmA)\n",usb_get_class_desc(dev->config.if_desc[0].bInterfaceClass), |
| dev->slow ? "1.5MBit/s" : "12MBit/s",dev->config.MaxPower * 2); |
| if (strlen(dev->mf) || |
| strlen(dev->prod) || |
| strlen(dev->serial)) |
| printf(" %s %s %s %s\n",pre,dev->mf,dev->prod,dev->serial); |
| printf(" %s\n",pre); |
| if (dev->maxchild>0) { |
| for(i=0;i<dev->maxchild;i++) { |
| if (dev->children[i]!=NULL) { |
| usb_show_tree_graph(dev->children[i],pre); |
| pre[index]=0; |
| } |
| } |
| } |
| } |
| |
| /* main routine for the tree command */ |
| void usb_show_tree(struct usb_device *dev) |
| { |
| char preamble[32]; |
| |
| memset(preamble,0,32); |
| usb_show_tree_graph(dev,&preamble[0]); |
| } |
| |
| |
| /****************************************************************************** |
| * usb boot command intepreter. Derived from diskboot |
| */ |
| #ifdef CONFIG_USB_STORAGE |
| int do_usbboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) |
| { |
| char *boot_device = NULL; |
| char *ep; |
| int dev, part=1, rcode; |
| ulong addr, cnt, checksum; |
| disk_partition_t info; |
| image_header_t *hdr; |
| block_dev_desc_t *stor_dev; |
| |
| |
| switch (argc) { |
| case 1: |
| addr = CFG_LOAD_ADDR; |
| boot_device = getenv ("bootdevice"); |
| break; |
| case 2: |
| addr = simple_strtoul(argv[1], NULL, 16); |
| boot_device = getenv ("bootdevice"); |
| break; |
| case 3: |
| addr = simple_strtoul(argv[1], NULL, 16); |
| boot_device = argv[2]; |
| break; |
| default: |
| printf ("Usage:\n%s\n", cmdtp->usage); |
| return 1; |
| } |
| |
| if (!boot_device) { |
| puts ("\n** No boot device **\n"); |
| return 1; |
| } |
| |
| dev = simple_strtoul(boot_device, &ep, 16); |
| stor_dev=usb_stor_get_dev(dev); |
| if (stor_dev->type == DEV_TYPE_UNKNOWN) { |
| printf ("\n** Device %d not available\n", dev); |
| return 1; |
| } |
| if (stor_dev->block_read==NULL) { |
| printf("storage device not initialized. Use usb scan\n"); |
| return 1; |
| } |
| if (*ep) { |
| if (*ep != ':') { |
| puts ("\n** Invalid boot device, use `dev[:part]' **\n"); |
| return 1; |
| } |
| part = simple_strtoul(++ep, NULL, 16); |
| } |
| |
| if (get_partition_info (stor_dev, part, &info)) { |
| /* try to boot raw .... */ |
| strncpy(&info.type[0], BOOT_PART_TYPE, sizeof(BOOT_PART_TYPE)); |
| strncpy(&info.name[0], "Raw", 4); |
| info.start=0; |
| info.blksz=0x200; |
| info.size=2880; |
| printf("error reading partinfo...try to boot raw\n"); |
| } |
| if ((strncmp(info.type, BOOT_PART_TYPE, sizeof(info.type)) != 0) && |
| (strncmp(info.type, BOOT_PART_COMP, sizeof(info.type)) != 0)) { |
| printf ("\n** Invalid partition type \"%.32s\"" |
| " (expect \"" BOOT_PART_TYPE "\")\n", |
| info.type); |
| return 1; |
| } |
| printf ("\nLoading from USB device %d, partition %d: " |
| "Name: %.32s Type: %.32s\n", |
| dev, part, info.name, info.type); |
| |
| debug ("First Block: %ld, # of blocks: %ld, Block Size: %ld\n", |
| info.start, info.size, info.blksz); |
| |
| if (stor_dev->block_read(dev, info.start, 1, (ulong *)addr) != 1) { |
| printf ("** Read error on %d:%d\n", dev, part); |
| return 1; |
| } |
| |
| hdr = (image_header_t *)addr; |
| |
| if (ntohl(hdr->ih_magic) != IH_MAGIC) { |
| printf("\n** Bad Magic Number **\n"); |
| return 1; |
| } |
| |
| checksum = ntohl(hdr->ih_hcrc); |
| hdr->ih_hcrc = 0; |
| |
| if (crc32 (0, (char *)hdr, sizeof(image_header_t)) != checksum) { |
| puts ("\n** Bad Header Checksum **\n"); |
| return 1; |
| } |
| hdr->ih_hcrc = htonl(checksum); /* restore checksum for later use */ |
| |
| print_image_hdr (hdr); |
| |
| cnt = (ntohl(hdr->ih_size) + sizeof(image_header_t)); |
| cnt += info.blksz - 1; |
| cnt /= info.blksz; |
| cnt -= 1; |
| |
| if (stor_dev->block_read (dev, info.start+1, cnt, |
| (ulong *)(addr+info.blksz)) != cnt) { |
| printf ("\n** Read error on %d:%d\n", dev, part); |
| return 1; |
| } |
| /* Loading ok, update default load address */ |
| load_addr = addr; |
| |
| flush_cache (addr, (cnt+1)*info.blksz); |
| |
| /* Check if we should attempt an auto-start */ |
| if (((ep = getenv("autostart")) != NULL) && (strcmp(ep,"yes") == 0)) { |
| char *local_args[2]; |
| extern int do_bootm (cmd_tbl_t *, int, int, char *[]); |
| local_args[0] = argv[0]; |
| local_args[1] = NULL; |
| printf ("Automatic boot of image at addr 0x%08lX ...\n", addr); |
| rcode=do_bootm (cmdtp, 0, 1, local_args); |
| return rcode; |
| } |
| return 0; |
| } |
| #endif /* CONFIG_USB_STORAGE */ |
| |
| |
| /********************************************************************************* |
| * usb command intepreter |
| */ |
| int do_usb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) |
| { |
| |
| int i; |
| struct usb_device *dev = NULL; |
| #ifdef CONFIG_USB_STORAGE |
| block_dev_desc_t *stor_dev; |
| #endif |
| |
| if ((strncmp(argv[1],"reset",5) == 0) || |
| (strncmp(argv[1],"start",5) == 0)){ |
| usb_stop(); |
| printf("(Re)start USB...\n"); |
| usb_init(); |
| return 0; |
| } |
| if (strncmp(argv[1],"stop",4) == 0) { |
| #ifdef CONFIG_USB_KEYBOARD |
| if (argc==2) { |
| if (usb_kbd_deregister()!=0) { |
| printf("USB not stopped: usbkbd still using USB\n"); |
| return 1; |
| } |
| } |
| else { /* forced stop, switch console in to serial */ |
| console_assign(stdin,"serial"); |
| usb_kbd_deregister(); |
| } |
| #endif |
| printf("stopping USB..\n"); |
| usb_stop(); |
| return 0; |
| } |
| if (strncmp(argv[1],"tree",4) == 0) { |
| printf("\nDevice Tree:\n"); |
| usb_show_tree(usb_get_dev_index(0)); |
| return 0; |
| } |
| if (strncmp(argv[1],"inf",3) == 0) { |
| int d; |
| if (argc==2) { |
| for(d=0;d<USB_MAX_DEVICE;d++) { |
| dev=usb_get_dev_index(d); |
| if (dev==NULL) |
| break; |
| usb_display_desc(dev); |
| usb_display_config(dev); |
| } |
| return 0; |
| } |
| else { |
| int d; |
| |
| i=simple_strtoul(argv[2], NULL, 16); |
| printf("config for device %d\n",i); |
| for(d=0;d<USB_MAX_DEVICE;d++) { |
| dev=usb_get_dev_index(d); |
| if (dev==NULL) |
| break; |
| if (dev->devnum==i) |
| break; |
| } |
| if (dev==NULL) { |
| printf("*** NO Device avaiable ***\n"); |
| return 0; |
| } |
| else { |
| usb_display_desc(dev); |
| usb_display_config(dev); |
| } |
| } |
| return 0; |
| } |
| #ifdef CONFIG_USB_STORAGE |
| if (strncmp(argv[1],"scan",4) == 0) { |
| printf("Scan for storage device:\n"); |
| usb_stor_curr_dev=usb_stor_scan(1); |
| if (usb_stor_curr_dev==-1) { |
| printf("No device found. Not initialized?\n"); |
| return 1; |
| } |
| return 0; |
| } |
| if (strncmp(argv[1],"part",4) == 0) { |
| int devno, ok; |
| for (ok=0, devno=0; devno<USB_MAX_STOR_DEV; ++devno) { |
| stor_dev=usb_stor_get_dev(devno); |
| if (stor_dev->type!=DEV_TYPE_UNKNOWN) { |
| ok++; |
| if (devno) |
| printf("\n"); |
| printf("print_part of %x\n",devno); |
| print_part(stor_dev); |
| } |
| } |
| if (!ok) { |
| printf("\nno USB devices available\n"); |
| return 1; |
| } |
| return 0; |
| } |
| if (strcmp(argv[1],"read") == 0) { |
| if (usb_stor_curr_dev<0) { |
| printf("no current device selected\n"); |
| return 1; |
| } |
| if (argc==5) { |
| unsigned long addr = simple_strtoul(argv[2], NULL, 16); |
| unsigned long blk = simple_strtoul(argv[3], NULL, 16); |
| unsigned long cnt = simple_strtoul(argv[4], NULL, 16); |
| unsigned long n; |
| printf ("\nUSB read: device %d block # %ld, count %ld ... ", |
| usb_stor_curr_dev, blk, cnt); |
| stor_dev=usb_stor_get_dev(usb_stor_curr_dev); |
| n = stor_dev->block_read(usb_stor_curr_dev, blk, cnt, (ulong *)addr); |
| printf ("%ld blocks read: %s\n",n,(n==cnt) ? "OK" : "ERROR"); |
| if (n==cnt) |
| return 0; |
| return 1; |
| } |
| } |
| if (strcmp(argv[1],"dev") == 0) { |
| if (argc==3) { |
| int dev = (int)simple_strtoul(argv[2], NULL, 10); |
| printf ("\nUSB device %d: ", dev); |
| if (dev >= USB_MAX_STOR_DEV) { |
| printf("unknown device\n"); |
| return 1; |
| } |
| printf ("\n Device %d: ", dev); |
| stor_dev=usb_stor_get_dev(dev); |
| dev_print(stor_dev); |
| if (stor_dev->type == DEV_TYPE_UNKNOWN) { |
| return 1; |
| } |
| usb_stor_curr_dev = dev; |
| printf("... is now current device\n"); |
| return 0; |
| } |
| else { |
| printf ("\nUSB device %d: ", usb_stor_curr_dev); |
| stor_dev=usb_stor_get_dev(usb_stor_curr_dev); |
| dev_print(stor_dev); |
| if (stor_dev->type == DEV_TYPE_UNKNOWN) { |
| return 1; |
| } |
| return 0; |
| } |
| return 0; |
| } |
| #endif /* CONFIG_USB_STORAGE */ |
| printf ("Usage:\n%s\n", cmdtp->usage); |
| return 1; |
| } |
| |
| |
| #endif /* (CONFIG_COMMANDS & CFG_CMD_USB) */ |
| |
| |
| #if (CONFIG_COMMANDS & CFG_CMD_USB) |
| |
| #ifdef CONFIG_USB_STORAGE |
| U_BOOT_CMD( |
| usb, 5, 1, do_usb, |
| "usb - USB sub-system\n", |
| "reset - reset (rescan) USB controller\n" |
| "usb stop [f] - stop USB [f]=force stop\n" |
| "usb tree - show USB device tree\n" |
| "usb info [dev] - show available USB devices\n" |
| "usb scan - (re-)scan USB bus for storage devices\n" |
| "usb dev [dev] - show or set current USB storage device\n" |
| "usb part [dev] - print partition table of one or all USB storage devices\n" |
| "usb read addr blk# cnt - read `cnt' blocks starting at block `blk#'\n" |
| " to memory address `addr'\n" |
| ); |
| |
| |
| U_BOOT_CMD( |
| usbboot, 3, 1, do_usbboot, |
| "usbboot - boot from USB device\n", |
| "loadAddr dev:part\n" |
| ); |
| |
| #else |
| U_BOOT_CMD( |
| usb, 5, 1, do_usb, |
| "usb - USB sub-system\n", |
| "reset - reset (rescan) USB controller\n" |
| "usb tree - show USB device tree\n" |
| "usb info [dev] - show available USB devices\n" |
| ); |
| #endif |
| #endif |