| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2017 STMicroelectronics |
| */ |
| |
| #include <common.h> |
| #include <clk.h> |
| #include <dm.h> |
| #include <i2c.h> |
| #include <malloc.h> |
| #include <reset.h> |
| |
| #include <dm/device.h> |
| #include <linux/io.h> |
| |
| /* STM32 I2C registers */ |
| struct stm32_i2c_regs { |
| u32 cr1; /* I2C control register 1 */ |
| u32 cr2; /* I2C control register 2 */ |
| u32 oar1; /* I2C own address 1 register */ |
| u32 oar2; /* I2C own address 2 register */ |
| u32 timingr; /* I2C timing register */ |
| u32 timeoutr; /* I2C timeout register */ |
| u32 isr; /* I2C interrupt and status register */ |
| u32 icr; /* I2C interrupt clear register */ |
| u32 pecr; /* I2C packet error checking register */ |
| u32 rxdr; /* I2C receive data register */ |
| u32 txdr; /* I2C transmit data register */ |
| }; |
| |
| #define STM32_I2C_CR1 0x00 |
| #define STM32_I2C_CR2 0x04 |
| #define STM32_I2C_TIMINGR 0x10 |
| #define STM32_I2C_ISR 0x18 |
| #define STM32_I2C_ICR 0x1C |
| #define STM32_I2C_RXDR 0x24 |
| #define STM32_I2C_TXDR 0x28 |
| |
| /* STM32 I2C control 1 */ |
| #define STM32_I2C_CR1_ANFOFF BIT(12) |
| #define STM32_I2C_CR1_ERRIE BIT(7) |
| #define STM32_I2C_CR1_TCIE BIT(6) |
| #define STM32_I2C_CR1_STOPIE BIT(5) |
| #define STM32_I2C_CR1_NACKIE BIT(4) |
| #define STM32_I2C_CR1_ADDRIE BIT(3) |
| #define STM32_I2C_CR1_RXIE BIT(2) |
| #define STM32_I2C_CR1_TXIE BIT(1) |
| #define STM32_I2C_CR1_PE BIT(0) |
| |
| /* STM32 I2C control 2 */ |
| #define STM32_I2C_CR2_AUTOEND BIT(25) |
| #define STM32_I2C_CR2_RELOAD BIT(24) |
| #define STM32_I2C_CR2_NBYTES_MASK GENMASK(23, 16) |
| #define STM32_I2C_CR2_NBYTES(n) ((n & 0xff) << 16) |
| #define STM32_I2C_CR2_NACK BIT(15) |
| #define STM32_I2C_CR2_STOP BIT(14) |
| #define STM32_I2C_CR2_START BIT(13) |
| #define STM32_I2C_CR2_HEAD10R BIT(12) |
| #define STM32_I2C_CR2_ADD10 BIT(11) |
| #define STM32_I2C_CR2_RD_WRN BIT(10) |
| #define STM32_I2C_CR2_SADD10_MASK GENMASK(9, 0) |
| #define STM32_I2C_CR2_SADD10(n) (n & STM32_I2C_CR2_SADD10_MASK) |
| #define STM32_I2C_CR2_SADD7_MASK GENMASK(7, 1) |
| #define STM32_I2C_CR2_SADD7(n) ((n & 0x7f) << 1) |
| #define STM32_I2C_CR2_RESET_MASK (STM32_I2C_CR2_HEAD10R \ |
| | STM32_I2C_CR2_NBYTES_MASK \ |
| | STM32_I2C_CR2_SADD7_MASK \ |
| | STM32_I2C_CR2_RELOAD \ |
| | STM32_I2C_CR2_RD_WRN) |
| |
| /* STM32 I2C Interrupt Status */ |
| #define STM32_I2C_ISR_BUSY BIT(15) |
| #define STM32_I2C_ISR_ARLO BIT(9) |
| #define STM32_I2C_ISR_BERR BIT(8) |
| #define STM32_I2C_ISR_TCR BIT(7) |
| #define STM32_I2C_ISR_TC BIT(6) |
| #define STM32_I2C_ISR_STOPF BIT(5) |
| #define STM32_I2C_ISR_NACKF BIT(4) |
| #define STM32_I2C_ISR_ADDR BIT(3) |
| #define STM32_I2C_ISR_RXNE BIT(2) |
| #define STM32_I2C_ISR_TXIS BIT(1) |
| #define STM32_I2C_ISR_TXE BIT(0) |
| #define STM32_I2C_ISR_ERRORS (STM32_I2C_ISR_BERR \ |
| | STM32_I2C_ISR_ARLO) |
| |
| /* STM32 I2C Interrupt Clear */ |
| #define STM32_I2C_ICR_ARLOCF BIT(9) |
| #define STM32_I2C_ICR_BERRCF BIT(8) |
| #define STM32_I2C_ICR_STOPCF BIT(5) |
| #define STM32_I2C_ICR_NACKCF BIT(4) |
| |
| /* STM32 I2C Timing */ |
| #define STM32_I2C_TIMINGR_PRESC(n) ((n & 0xf) << 28) |
| #define STM32_I2C_TIMINGR_SCLDEL(n) ((n & 0xf) << 20) |
| #define STM32_I2C_TIMINGR_SDADEL(n) ((n & 0xf) << 16) |
| #define STM32_I2C_TIMINGR_SCLH(n) ((n & 0xff) << 8) |
| #define STM32_I2C_TIMINGR_SCLL(n) (n & 0xff) |
| |
| #define STM32_I2C_MAX_LEN 0xff |
| |
| #define STM32_I2C_DNF_DEFAULT 0 |
| #define STM32_I2C_DNF_MAX 16 |
| |
| #define STM32_I2C_ANALOG_FILTER_ENABLE 1 |
| #define STM32_I2C_ANALOG_FILTER_DELAY_MIN 50 /* ns */ |
| #define STM32_I2C_ANALOG_FILTER_DELAY_MAX 260 /* ns */ |
| |
| #define STM32_I2C_RISE_TIME_DEFAULT 25 /* ns */ |
| #define STM32_I2C_FALL_TIME_DEFAULT 10 /* ns */ |
| |
| #define STM32_PRESC_MAX BIT(4) |
| #define STM32_SCLDEL_MAX BIT(4) |
| #define STM32_SDADEL_MAX BIT(4) |
| #define STM32_SCLH_MAX BIT(8) |
| #define STM32_SCLL_MAX BIT(8) |
| |
| #define STM32_NSEC_PER_SEC 1000000000L |
| |
| /** |
| * struct stm32_i2c_spec - private i2c specification timing |
| * @rate: I2C bus speed (Hz) |
| * @rate_min: 80% of I2C bus speed (Hz) |
| * @rate_max: 120% of I2C bus speed (Hz) |
| * @fall_max: Max fall time of both SDA and SCL signals (ns) |
| * @rise_max: Max rise time of both SDA and SCL signals (ns) |
| * @hddat_min: Min data hold time (ns) |
| * @vddat_max: Max data valid time (ns) |
| * @sudat_min: Min data setup time (ns) |
| * @l_min: Min low period of the SCL clock (ns) |
| * @h_min: Min high period of the SCL clock (ns) |
| */ |
| |
| struct stm32_i2c_spec { |
| u32 rate; |
| u32 rate_min; |
| u32 rate_max; |
| u32 fall_max; |
| u32 rise_max; |
| u32 hddat_min; |
| u32 vddat_max; |
| u32 sudat_min; |
| u32 l_min; |
| u32 h_min; |
| }; |
| |
| /** |
| * struct stm32_i2c_setup - private I2C timing setup parameters |
| * @speed: I2C speed mode (standard, Fast Plus) |
| * @speed_freq: I2C speed frequency (Hz) |
| * @clock_src: I2C clock source frequency (Hz) |
| * @rise_time: Rise time (ns) |
| * @fall_time: Fall time (ns) |
| * @dnf: Digital filter coefficient (0-16) |
| * @analog_filter: Analog filter delay (On/Off) |
| */ |
| struct stm32_i2c_setup { |
| enum i2c_speed_mode speed; |
| u32 speed_freq; |
| u32 clock_src; |
| u32 rise_time; |
| u32 fall_time; |
| u8 dnf; |
| bool analog_filter; |
| }; |
| |
| /** |
| * struct stm32_i2c_timings - private I2C output parameters |
| * @prec: Prescaler value |
| * @scldel: Data setup time |
| * @sdadel: Data hold time |
| * @sclh: SCL high period (master mode) |
| * @sclh: SCL low period (master mode) |
| */ |
| struct stm32_i2c_timings { |
| struct list_head node; |
| u8 presc; |
| u8 scldel; |
| u8 sdadel; |
| u8 sclh; |
| u8 scll; |
| }; |
| |
| struct stm32_i2c_priv { |
| struct stm32_i2c_regs *regs; |
| struct clk clk; |
| struct stm32_i2c_setup *setup; |
| int speed; |
| }; |
| |
| static const struct stm32_i2c_spec i2c_specs[] = { |
| [IC_SPEED_MODE_STANDARD] = { |
| .rate = I2C_SPEED_STANDARD_RATE, |
| .rate_min = 8000, |
| .rate_max = 120000, |
| .fall_max = 300, |
| .rise_max = 1000, |
| .hddat_min = 0, |
| .vddat_max = 3450, |
| .sudat_min = 250, |
| .l_min = 4700, |
| .h_min = 4000, |
| }, |
| [IC_SPEED_MODE_FAST] = { |
| .rate = I2C_SPEED_FAST_RATE, |
| .rate_min = 320000, |
| .rate_max = 480000, |
| .fall_max = 300, |
| .rise_max = 300, |
| .hddat_min = 0, |
| .vddat_max = 900, |
| .sudat_min = 100, |
| .l_min = 1300, |
| .h_min = 600, |
| }, |
| [IC_SPEED_MODE_FAST_PLUS] = { |
| .rate = I2C_SPEED_FAST_PLUS_RATE, |
| .rate_min = 800000, |
| .rate_max = 1200000, |
| .fall_max = 100, |
| .rise_max = 120, |
| .hddat_min = 0, |
| .vddat_max = 450, |
| .sudat_min = 50, |
| .l_min = 500, |
| .h_min = 260, |
| }, |
| }; |
| |
| static const struct stm32_i2c_setup stm32f7_setup = { |
| .rise_time = STM32_I2C_RISE_TIME_DEFAULT, |
| .fall_time = STM32_I2C_FALL_TIME_DEFAULT, |
| .dnf = STM32_I2C_DNF_DEFAULT, |
| .analog_filter = STM32_I2C_ANALOG_FILTER_ENABLE, |
| }; |
| |
| static int stm32_i2c_check_device_busy(struct stm32_i2c_priv *i2c_priv) |
| { |
| struct stm32_i2c_regs *regs = i2c_priv->regs; |
| u32 status = readl(®s->isr); |
| |
| if (status & STM32_I2C_ISR_BUSY) |
| return -EBUSY; |
| |
| return 0; |
| } |
| |
| static void stm32_i2c_message_start(struct stm32_i2c_priv *i2c_priv, |
| struct i2c_msg *msg, bool stop) |
| { |
| struct stm32_i2c_regs *regs = i2c_priv->regs; |
| u32 cr2 = readl(®s->cr2); |
| |
| /* Set transfer direction */ |
| cr2 &= ~STM32_I2C_CR2_RD_WRN; |
| if (msg->flags & I2C_M_RD) |
| cr2 |= STM32_I2C_CR2_RD_WRN; |
| |
| /* Set slave address */ |
| cr2 &= ~(STM32_I2C_CR2_HEAD10R | STM32_I2C_CR2_ADD10); |
| if (msg->flags & I2C_M_TEN) { |
| cr2 &= ~STM32_I2C_CR2_SADD10_MASK; |
| cr2 |= STM32_I2C_CR2_SADD10(msg->addr); |
| cr2 |= STM32_I2C_CR2_ADD10; |
| } else { |
| cr2 &= ~STM32_I2C_CR2_SADD7_MASK; |
| cr2 |= STM32_I2C_CR2_SADD7(msg->addr); |
| } |
| |
| /* Set nb bytes to transfer and reload or autoend bits */ |
| cr2 &= ~(STM32_I2C_CR2_NBYTES_MASK | STM32_I2C_CR2_RELOAD | |
| STM32_I2C_CR2_AUTOEND); |
| if (msg->len > STM32_I2C_MAX_LEN) { |
| cr2 |= STM32_I2C_CR2_NBYTES(STM32_I2C_MAX_LEN); |
| cr2 |= STM32_I2C_CR2_RELOAD; |
| } else { |
| cr2 |= STM32_I2C_CR2_NBYTES(msg->len); |
| } |
| |
| /* Write configurations register */ |
| writel(cr2, ®s->cr2); |
| |
| /* START/ReSTART generation */ |
| setbits_le32(®s->cr2, STM32_I2C_CR2_START); |
| } |
| |
| /* |
| * RELOAD mode must be selected if total number of data bytes to be |
| * sent is greater than MAX_LEN |
| */ |
| |
| static void stm32_i2c_handle_reload(struct stm32_i2c_priv *i2c_priv, |
| struct i2c_msg *msg, bool stop) |
| { |
| struct stm32_i2c_regs *regs = i2c_priv->regs; |
| u32 cr2 = readl(®s->cr2); |
| |
| cr2 &= ~STM32_I2C_CR2_NBYTES_MASK; |
| |
| if (msg->len > STM32_I2C_MAX_LEN) { |
| cr2 |= STM32_I2C_CR2_NBYTES(STM32_I2C_MAX_LEN); |
| } else { |
| cr2 &= ~STM32_I2C_CR2_RELOAD; |
| cr2 |= STM32_I2C_CR2_NBYTES(msg->len); |
| } |
| |
| writel(cr2, ®s->cr2); |
| } |
| |
| static int stm32_i2c_wait_flags(struct stm32_i2c_priv *i2c_priv, |
| u32 flags, u32 *status) |
| { |
| struct stm32_i2c_regs *regs = i2c_priv->regs; |
| u32 time_start = get_timer(0); |
| |
| *status = readl(®s->isr); |
| while (!(*status & flags)) { |
| if (get_timer(time_start) > CONFIG_SYS_HZ) { |
| debug("%s: i2c timeout\n", __func__); |
| return -ETIMEDOUT; |
| } |
| |
| *status = readl(®s->isr); |
| } |
| |
| return 0; |
| } |
| |
| static int stm32_i2c_check_end_of_message(struct stm32_i2c_priv *i2c_priv) |
| { |
| struct stm32_i2c_regs *regs = i2c_priv->regs; |
| u32 mask = STM32_I2C_ISR_ERRORS | STM32_I2C_ISR_NACKF | |
| STM32_I2C_ISR_STOPF; |
| u32 status; |
| int ret; |
| |
| ret = stm32_i2c_wait_flags(i2c_priv, mask, &status); |
| if (ret) |
| return ret; |
| |
| if (status & STM32_I2C_ISR_BERR) { |
| debug("%s: Bus error\n", __func__); |
| |
| /* Clear BERR flag */ |
| setbits_le32(®s->icr, STM32_I2C_ICR_BERRCF); |
| |
| return -EIO; |
| } |
| |
| if (status & STM32_I2C_ISR_ARLO) { |
| debug("%s: Arbitration lost\n", __func__); |
| |
| /* Clear ARLO flag */ |
| setbits_le32(®s->icr, STM32_I2C_ICR_ARLOCF); |
| |
| return -EAGAIN; |
| } |
| |
| if (status & STM32_I2C_ISR_NACKF) { |
| debug("%s: Receive NACK\n", __func__); |
| |
| /* Clear NACK flag */ |
| setbits_le32(®s->icr, STM32_I2C_ICR_NACKCF); |
| |
| /* Wait until STOPF flag is set */ |
| mask = STM32_I2C_ISR_STOPF; |
| ret = stm32_i2c_wait_flags(i2c_priv, mask, &status); |
| if (ret) |
| return ret; |
| |
| ret = -EIO; |
| } |
| |
| if (status & STM32_I2C_ISR_STOPF) { |
| /* Clear STOP flag */ |
| setbits_le32(®s->icr, STM32_I2C_ICR_STOPCF); |
| |
| /* Clear control register 2 */ |
| setbits_le32(®s->cr2, STM32_I2C_CR2_RESET_MASK); |
| } |
| |
| return ret; |
| } |
| |
| static int stm32_i2c_message_xfer(struct stm32_i2c_priv *i2c_priv, |
| struct i2c_msg *msg, bool stop) |
| { |
| struct stm32_i2c_regs *regs = i2c_priv->regs; |
| u32 status; |
| u32 mask = msg->flags & I2C_M_RD ? STM32_I2C_ISR_RXNE : |
| STM32_I2C_ISR_TXIS | STM32_I2C_ISR_NACKF; |
| int bytes_to_rw = msg->len > STM32_I2C_MAX_LEN ? |
| STM32_I2C_MAX_LEN : msg->len; |
| int ret = 0; |
| |
| /* Add errors */ |
| mask |= STM32_I2C_ISR_ERRORS; |
| |
| stm32_i2c_message_start(i2c_priv, msg, stop); |
| |
| while (msg->len) { |
| /* |
| * Wait until TXIS/NACKF/BERR/ARLO flags or |
| * RXNE/BERR/ARLO flags are set |
| */ |
| ret = stm32_i2c_wait_flags(i2c_priv, mask, &status); |
| if (ret) |
| break; |
| |
| if (status & (STM32_I2C_ISR_NACKF | STM32_I2C_ISR_ERRORS)) |
| break; |
| |
| if (status & STM32_I2C_ISR_RXNE) { |
| *msg->buf++ = readb(®s->rxdr); |
| msg->len--; |
| bytes_to_rw--; |
| } |
| |
| if (status & STM32_I2C_ISR_TXIS) { |
| writeb(*msg->buf++, ®s->txdr); |
| msg->len--; |
| bytes_to_rw--; |
| } |
| |
| if (!bytes_to_rw && msg->len) { |
| /* Wait until TCR flag is set */ |
| mask = STM32_I2C_ISR_TCR; |
| ret = stm32_i2c_wait_flags(i2c_priv, mask, &status); |
| if (ret) |
| break; |
| |
| bytes_to_rw = msg->len > STM32_I2C_MAX_LEN ? |
| STM32_I2C_MAX_LEN : msg->len; |
| mask = msg->flags & I2C_M_RD ? STM32_I2C_ISR_RXNE : |
| STM32_I2C_ISR_TXIS | STM32_I2C_ISR_NACKF; |
| |
| stm32_i2c_handle_reload(i2c_priv, msg, stop); |
| } else if (!bytes_to_rw) { |
| /* Wait until TC flag is set */ |
| mask = STM32_I2C_ISR_TC; |
| ret = stm32_i2c_wait_flags(i2c_priv, mask, &status); |
| if (ret) |
| break; |
| |
| if (!stop) |
| /* Message sent, new message has to be sent */ |
| return 0; |
| } |
| } |
| |
| /* End of transfer, send stop condition */ |
| mask = STM32_I2C_CR2_STOP; |
| setbits_le32(®s->cr2, mask); |
| |
| return stm32_i2c_check_end_of_message(i2c_priv); |
| } |
| |
| static int stm32_i2c_xfer(struct udevice *bus, struct i2c_msg *msg, |
| int nmsgs) |
| { |
| struct stm32_i2c_priv *i2c_priv = dev_get_priv(bus); |
| int ret; |
| |
| ret = stm32_i2c_check_device_busy(i2c_priv); |
| if (ret) |
| return ret; |
| |
| for (; nmsgs > 0; nmsgs--, msg++) { |
| ret = stm32_i2c_message_xfer(i2c_priv, msg, nmsgs == 1); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int stm32_i2c_compute_solutions(struct stm32_i2c_setup *setup, |
| struct list_head *solutions) |
| { |
| struct stm32_i2c_timings *v; |
| u32 p_prev = STM32_PRESC_MAX; |
| u32 i2cclk = DIV_ROUND_CLOSEST(STM32_NSEC_PER_SEC, |
| setup->clock_src); |
| u32 af_delay_min, af_delay_max; |
| u16 p, l, a; |
| int sdadel_min, sdadel_max, scldel_min; |
| int ret = 0; |
| |
| af_delay_min = setup->analog_filter ? |
| STM32_I2C_ANALOG_FILTER_DELAY_MIN : 0; |
| af_delay_max = setup->analog_filter ? |
| STM32_I2C_ANALOG_FILTER_DELAY_MAX : 0; |
| |
| sdadel_min = i2c_specs[setup->speed].hddat_min + setup->fall_time - |
| af_delay_min - (setup->dnf + 3) * i2cclk; |
| |
| sdadel_max = i2c_specs[setup->speed].vddat_max - setup->rise_time - |
| af_delay_max - (setup->dnf + 4) * i2cclk; |
| |
| scldel_min = setup->rise_time + i2c_specs[setup->speed].sudat_min; |
| |
| if (sdadel_min < 0) |
| sdadel_min = 0; |
| if (sdadel_max < 0) |
| sdadel_max = 0; |
| |
| debug("%s: SDADEL(min/max): %i/%i, SCLDEL(Min): %i\n", __func__, |
| sdadel_min, sdadel_max, scldel_min); |
| |
| /* Compute possible values for PRESC, SCLDEL and SDADEL */ |
| for (p = 0; p < STM32_PRESC_MAX; p++) { |
| for (l = 0; l < STM32_SCLDEL_MAX; l++) { |
| int scldel = (l + 1) * (p + 1) * i2cclk; |
| |
| if (scldel < scldel_min) |
| continue; |
| |
| for (a = 0; a < STM32_SDADEL_MAX; a++) { |
| int sdadel = (a * (p + 1) + 1) * i2cclk; |
| |
| if (((sdadel >= sdadel_min) && |
| (sdadel <= sdadel_max)) && |
| (p != p_prev)) { |
| v = calloc(1, sizeof(*v)); |
| if (!v) |
| return -ENOMEM; |
| |
| v->presc = p; |
| v->scldel = l; |
| v->sdadel = a; |
| p_prev = p; |
| |
| list_add_tail(&v->node, solutions); |
| break; |
| } |
| } |
| |
| if (p_prev == p) |
| break; |
| } |
| } |
| |
| if (list_empty(solutions)) { |
| pr_err("%s: no Prescaler solution\n", __func__); |
| ret = -EPERM; |
| } |
| |
| return ret; |
| } |
| |
| static int stm32_i2c_choose_solution(struct stm32_i2c_setup *setup, |
| struct list_head *solutions, |
| struct stm32_i2c_timings *s) |
| { |
| struct stm32_i2c_timings *v; |
| u32 i2cbus = DIV_ROUND_CLOSEST(STM32_NSEC_PER_SEC, |
| setup->speed_freq); |
| u32 clk_error_prev = i2cbus; |
| u32 i2cclk = DIV_ROUND_CLOSEST(STM32_NSEC_PER_SEC, |
| setup->clock_src); |
| u32 clk_min, clk_max; |
| u32 af_delay_min; |
| u32 dnf_delay; |
| u32 tsync; |
| u16 l, h; |
| bool sol_found = false; |
| int ret = 0; |
| |
| af_delay_min = setup->analog_filter ? |
| STM32_I2C_ANALOG_FILTER_DELAY_MIN : 0; |
| dnf_delay = setup->dnf * i2cclk; |
| |
| tsync = af_delay_min + dnf_delay + (2 * i2cclk); |
| clk_max = STM32_NSEC_PER_SEC / i2c_specs[setup->speed].rate_min; |
| clk_min = STM32_NSEC_PER_SEC / i2c_specs[setup->speed].rate_max; |
| |
| /* |
| * Among Prescaler possibilities discovered above figures out SCL Low |
| * and High Period. Provided: |
| * - SCL Low Period has to be higher than Low Period of the SCL Clock |
| * defined by I2C Specification. I2C Clock has to be lower than |
| * (SCL Low Period - Analog/Digital filters) / 4. |
| * - SCL High Period has to be lower than High Period of the SCL Clock |
| * defined by I2C Specification |
| * - I2C Clock has to be lower than SCL High Period |
| */ |
| list_for_each_entry(v, solutions, node) { |
| u32 prescaler = (v->presc + 1) * i2cclk; |
| |
| for (l = 0; l < STM32_SCLL_MAX; l++) { |
| u32 tscl_l = (l + 1) * prescaler + tsync; |
| |
| if ((tscl_l < i2c_specs[setup->speed].l_min) || |
| (i2cclk >= |
| ((tscl_l - af_delay_min - dnf_delay) / 4))) { |
| continue; |
| } |
| |
| for (h = 0; h < STM32_SCLH_MAX; h++) { |
| u32 tscl_h = (h + 1) * prescaler + tsync; |
| u32 tscl = tscl_l + tscl_h + |
| setup->rise_time + setup->fall_time; |
| |
| if ((tscl >= clk_min) && (tscl <= clk_max) && |
| (tscl_h >= i2c_specs[setup->speed].h_min) && |
| (i2cclk < tscl_h)) { |
| u32 clk_error; |
| |
| if (tscl > i2cbus) |
| clk_error = tscl - i2cbus; |
| else |
| clk_error = i2cbus - tscl; |
| |
| if (clk_error < clk_error_prev) { |
| clk_error_prev = clk_error; |
| v->scll = l; |
| v->sclh = h; |
| sol_found = true; |
| memcpy(s, v, sizeof(*s)); |
| } |
| } |
| } |
| } |
| } |
| |
| if (!sol_found) { |
| pr_err("%s: no solution at all\n", __func__); |
| ret = -EPERM; |
| } |
| |
| return ret; |
| } |
| |
| static int stm32_i2c_compute_timing(struct stm32_i2c_priv *i2c_priv, |
| struct stm32_i2c_setup *setup, |
| struct stm32_i2c_timings *output) |
| { |
| struct stm32_i2c_timings *v, *_v; |
| struct list_head solutions; |
| int ret; |
| |
| if (setup->speed >= ARRAY_SIZE(i2c_specs)) { |
| pr_err("%s: speed out of bound {%d/%d}\n", __func__, |
| setup->speed, ARRAY_SIZE(i2c_specs) - 1); |
| return -EINVAL; |
| } |
| |
| if ((setup->rise_time > i2c_specs[setup->speed].rise_max) || |
| (setup->fall_time > i2c_specs[setup->speed].fall_max)) { |
| pr_err("%s :timings out of bound Rise{%d>%d}/Fall{%d>%d}\n", |
| __func__, |
| setup->rise_time, i2c_specs[setup->speed].rise_max, |
| setup->fall_time, i2c_specs[setup->speed].fall_max); |
| return -EINVAL; |
| } |
| |
| if (setup->dnf > STM32_I2C_DNF_MAX) { |
| pr_err("%s: DNF out of bound %d/%d\n", __func__, |
| setup->dnf, STM32_I2C_DNF_MAX); |
| return -EINVAL; |
| } |
| |
| if (setup->speed_freq > i2c_specs[setup->speed].rate) { |
| pr_err("%s: Freq {%d/%d}\n", __func__, |
| setup->speed_freq, i2c_specs[setup->speed].rate); |
| return -EINVAL; |
| } |
| |
| INIT_LIST_HEAD(&solutions); |
| ret = stm32_i2c_compute_solutions(setup, &solutions); |
| if (ret) |
| goto exit; |
| |
| ret = stm32_i2c_choose_solution(setup, &solutions, output); |
| if (ret) |
| goto exit; |
| |
| debug("%s: Presc: %i, scldel: %i, sdadel: %i, scll: %i, sclh: %i\n", |
| __func__, output->presc, |
| output->scldel, output->sdadel, |
| output->scll, output->sclh); |
| |
| exit: |
| /* Release list and memory */ |
| list_for_each_entry_safe(v, _v, &solutions, node) { |
| list_del(&v->node); |
| free(v); |
| } |
| |
| return ret; |
| } |
| |
| static int stm32_i2c_setup_timing(struct stm32_i2c_priv *i2c_priv, |
| struct stm32_i2c_timings *timing) |
| { |
| struct stm32_i2c_setup *setup = i2c_priv->setup; |
| int ret = 0; |
| |
| setup->speed = i2c_priv->speed; |
| setup->speed_freq = i2c_specs[setup->speed].rate; |
| setup->clock_src = clk_get_rate(&i2c_priv->clk); |
| |
| if (!setup->clock_src) { |
| pr_err("%s: clock rate is 0\n", __func__); |
| return -EINVAL; |
| } |
| |
| do { |
| ret = stm32_i2c_compute_timing(i2c_priv, setup, timing); |
| if (ret) { |
| debug("%s: failed to compute I2C timings.\n", |
| __func__); |
| if (i2c_priv->speed > IC_SPEED_MODE_STANDARD) { |
| i2c_priv->speed--; |
| setup->speed = i2c_priv->speed; |
| setup->speed_freq = |
| i2c_specs[setup->speed].rate; |
| debug("%s: downgrade I2C Speed Freq to (%i)\n", |
| __func__, i2c_specs[setup->speed].rate); |
| } else { |
| break; |
| } |
| } |
| } while (ret); |
| |
| if (ret) { |
| pr_err("%s: impossible to compute I2C timings.\n", __func__); |
| return ret; |
| } |
| |
| debug("%s: I2C Speed(%i), Freq(%i), Clk Source(%i)\n", __func__, |
| setup->speed, setup->speed_freq, setup->clock_src); |
| debug("%s: I2C Rise(%i) and Fall(%i) Time\n", __func__, |
| setup->rise_time, setup->fall_time); |
| debug("%s: I2C Analog Filter(%s), DNF(%i)\n", __func__, |
| setup->analog_filter ? "On" : "Off", setup->dnf); |
| |
| return 0; |
| } |
| |
| static int stm32_i2c_hw_config(struct stm32_i2c_priv *i2c_priv) |
| { |
| struct stm32_i2c_regs *regs = i2c_priv->regs; |
| struct stm32_i2c_timings t; |
| int ret; |
| u32 timing = 0; |
| |
| ret = stm32_i2c_setup_timing(i2c_priv, &t); |
| if (ret) |
| return ret; |
| |
| /* Disable I2C */ |
| clrbits_le32(®s->cr1, STM32_I2C_CR1_PE); |
| |
| /* Timing settings */ |
| timing |= STM32_I2C_TIMINGR_PRESC(t.presc); |
| timing |= STM32_I2C_TIMINGR_SCLDEL(t.scldel); |
| timing |= STM32_I2C_TIMINGR_SDADEL(t.sdadel); |
| timing |= STM32_I2C_TIMINGR_SCLH(t.sclh); |
| timing |= STM32_I2C_TIMINGR_SCLL(t.scll); |
| writel(timing, ®s->timingr); |
| |
| /* Enable I2C */ |
| if (i2c_priv->setup->analog_filter) |
| clrbits_le32(®s->cr1, STM32_I2C_CR1_ANFOFF); |
| else |
| setbits_le32(®s->cr1, STM32_I2C_CR1_ANFOFF); |
| setbits_le32(®s->cr1, STM32_I2C_CR1_PE); |
| |
| return 0; |
| } |
| |
| static int stm32_i2c_set_bus_speed(struct udevice *bus, unsigned int speed) |
| { |
| struct stm32_i2c_priv *i2c_priv = dev_get_priv(bus); |
| |
| switch (speed) { |
| case I2C_SPEED_STANDARD_RATE: |
| i2c_priv->speed = IC_SPEED_MODE_STANDARD; |
| break; |
| case I2C_SPEED_FAST_RATE: |
| i2c_priv->speed = IC_SPEED_MODE_FAST; |
| break; |
| case I2C_SPEED_FAST_PLUS_RATE: |
| i2c_priv->speed = IC_SPEED_MODE_FAST_PLUS; |
| break; |
| default: |
| debug("%s: Speed %d not supported\n", __func__, speed); |
| return -EINVAL; |
| } |
| |
| return stm32_i2c_hw_config(i2c_priv); |
| } |
| |
| static int stm32_i2c_probe(struct udevice *dev) |
| { |
| struct stm32_i2c_priv *i2c_priv = dev_get_priv(dev); |
| struct reset_ctl reset_ctl; |
| fdt_addr_t addr; |
| int ret; |
| |
| addr = dev_read_addr(dev); |
| if (addr == FDT_ADDR_T_NONE) |
| return -EINVAL; |
| |
| i2c_priv->regs = (struct stm32_i2c_regs *)addr; |
| |
| ret = clk_get_by_index(dev, 0, &i2c_priv->clk); |
| if (ret) |
| return ret; |
| |
| ret = clk_enable(&i2c_priv->clk); |
| if (ret) |
| goto clk_free; |
| |
| ret = reset_get_by_index(dev, 0, &reset_ctl); |
| if (ret) |
| goto clk_disable; |
| |
| reset_assert(&reset_ctl); |
| udelay(2); |
| reset_deassert(&reset_ctl); |
| |
| return 0; |
| |
| clk_disable: |
| clk_disable(&i2c_priv->clk); |
| clk_free: |
| clk_free(&i2c_priv->clk); |
| |
| return ret; |
| } |
| |
| static int stm32_ofdata_to_platdata(struct udevice *dev) |
| { |
| struct stm32_i2c_priv *i2c_priv = dev_get_priv(dev); |
| u32 rise_time, fall_time; |
| |
| i2c_priv->setup = (struct stm32_i2c_setup *)dev_get_driver_data(dev); |
| if (!i2c_priv->setup) |
| return -EINVAL; |
| |
| rise_time = dev_read_u32_default(dev, "i2c-scl-rising-time-ns", 0); |
| if (rise_time) |
| i2c_priv->setup->rise_time = rise_time; |
| |
| fall_time = dev_read_u32_default(dev, "i2c-scl-falling-time-ns", 0); |
| if (fall_time) |
| i2c_priv->setup->fall_time = fall_time; |
| |
| return 0; |
| } |
| |
| static const struct dm_i2c_ops stm32_i2c_ops = { |
| .xfer = stm32_i2c_xfer, |
| .set_bus_speed = stm32_i2c_set_bus_speed, |
| }; |
| |
| static const struct udevice_id stm32_i2c_of_match[] = { |
| { .compatible = "st,stm32f7-i2c", .data = (ulong)&stm32f7_setup }, |
| {} |
| }; |
| |
| U_BOOT_DRIVER(stm32f7_i2c) = { |
| .name = "stm32f7-i2c", |
| .id = UCLASS_I2C, |
| .of_match = stm32_i2c_of_match, |
| .ofdata_to_platdata = stm32_ofdata_to_platdata, |
| .probe = stm32_i2c_probe, |
| .priv_auto_alloc_size = sizeof(struct stm32_i2c_priv), |
| .ops = &stm32_i2c_ops, |
| }; |