| This README is about U-Boot support for SAMSUNG's/NEXELL's ARM Cortex-A9 based |
| S5P4418 SoC. It is based on FriendlyARM's U-Boot v2016.01 for the NanoPi2 |
| Currently the following boards are supported: |
| * FriendlyArm NanoPi2 [2] |
| * FriendlyArm NanoPC-T2 [3] |
| make s5p4418_nanopi2_defconfig |
| - Download Official-ROMs-SDCard-20190718.7z from [4] (images files for android, |
| friendlyCore and LUbuntu) |
| - Use s5p4418-sd-lubuntu-desktop-xenial-4.4-armhf-20190718.img to make a SD-card |
| - Use dd in the directory where U-Boot has been built to update U-Boot: |
| (replace <SD-card> with the device used for the SD-card, e.g. sdc) |
| sudo dd seek=3841 if=u-boot.bin of=/dev/<SD-card> |
| - Boot the board from this SD-card |
| The source code for (the used?) LUbuntu 16.04 can be found at [5]. |
| [1] FriendlyArm U-boot v2016.01: |
| https://github.com/friendlyarm/u-boot/tree/nanopi2-v2016.01 |
| http://wiki.friendlyarm.com/wiki/index.php/NanoPi_2 |
| http://wiki.friendlyarm.com/wiki/index.php/NanoPC-T2 |
| [4] FriendlyArm image files for NanoPi2: |
| http://download.friendlyarm.com//NanoPi2 |
| [5] FriendlyArm LUbuntu 16.04 Source Code for NanoPi2: |
| https://github.com/friendlyarm/linux/tree/nanopi2-v4.4.y |