rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
diff --git a/board/mbx8xx/mbx8xx.c b/board/mbx8xx/mbx8xx.c
index 414d879..af4f57d 100644
--- a/board/mbx8xx/mbx8xx.c
+++ b/board/mbx8xx/mbx8xx.c
@@ -121,7 +121,7 @@
void mbx_init (void)
{
- volatile immap_t *immr = (immap_t *) CFG_IMMR;
+ volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
volatile memctl8xx_t *memctl = &immr->im_memctl;
ulong speed, refclock, plprcr, sccr;
ulong br0_32 = memctl->memc_br0 & 0x400;
@@ -147,21 +147,21 @@
immr->im_clkrstk.cark_sccrk = KAPWR_KEY;
sccr = immr->im_clkrst.car_sccr;
sccr &= SCCR_MASK;
- sccr |= CFG_SCCR;
+ sccr |= CONFIG_SYS_SCCR;
immr->im_clkrst.car_sccr = sccr;
speed = board_get_cpufreq ();
refclock = get_reffreq ();
-#if ((CFG_PLPRCR & PLPRCR_MF_MSK) != 0)
- plprcr = CFG_PLPRCR;
+#if ((CONFIG_SYS_PLPRCR & PLPRCR_MF_MSK) != 0)
+ plprcr = CONFIG_SYS_PLPRCR;
#else
plprcr = immr->im_clkrst.car_plprcr;
plprcr &= PLPRCR_MF_MSK; /* isolate MF field */
- plprcr |= CFG_PLPRCR; /* reset control bits */
+ plprcr |= CONFIG_SYS_PLPRCR; /* reset control bits */
#endif
-#ifdef CFG_USE_OSCCLK /* See doc/README.MBX ! */
+#ifdef CONFIG_SYS_USE_OSCCLK /* See doc/README.MBX ! */
plprcr |= ((speed + refclock / 2) / refclock - 1) << 20;
#endif
@@ -181,24 +181,24 @@
case 40:
memctl->memc_br0 = 0xFE000000 | br0_32 | 1;
memctl->memc_or0 = 0xFF800930;
- memctl->memc_or4 = CFG_NVRAM_OR | 0x920;
- memctl->memc_br4 = CFG_NVRAM_BASE | 0x401;
+ memctl->memc_or4 = CONFIG_SYS_NVRAM_OR | 0x920;
+ memctl->memc_br4 = CONFIG_SYS_NVRAM_BASE | 0x401;
break;
case 50:
memctl->memc_br0 = 0xFE000000 | br0_32 | 1;
memctl->memc_or0 = 0xFF800940;
- memctl->memc_or4 = CFG_NVRAM_OR | 0x930;
- memctl->memc_br4 = CFG_NVRAM_BASE | 0x401;
+ memctl->memc_or4 = CONFIG_SYS_NVRAM_OR | 0x930;
+ memctl->memc_br4 = CONFIG_SYS_NVRAM_BASE | 0x401;
break;
default:
hang ();
break;
}
#ifdef CONFIG_USE_PCI
- memctl->memc_or5 = CFG_PCIMEM_OR;
- memctl->memc_br5 = CFG_PCIMEM_BASE | 0x001;
- memctl->memc_or6 = CFG_PCIBRIDGE_OR;
- memctl->memc_br6 = CFG_PCIBRIDGE_BASE | 0x001;
+ memctl->memc_or5 = CONFIG_SYS_PCIMEM_OR;
+ memctl->memc_br5 = CONFIG_SYS_PCIMEM_BASE | 0x001;
+ memctl->memc_or6 = CONFIG_SYS_PCIBRIDGE_OR;
+ memctl->memc_br6 = CONFIG_SYS_PCIBRIDGE_BASE | 0x001;
#endif
/*
* FIXME: I do not understand why I have to call this to
@@ -306,7 +306,7 @@
phys_size_t initdram (int board_type)
{
- volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
unsigned long ram_sz = 0;
unsigned long dimm_sz = 0;
@@ -354,24 +354,24 @@
dimm_bank = dimm_sz / 2;
if (!dimm_sz) {
memctl->memc_or1 = ~(ram_sz - 1) | 0x400;
- memctl->memc_br1 = CFG_SDRAM_BASE | 0x81;
+ memctl->memc_br1 = CONFIG_SYS_SDRAM_BASE | 0x81;
memctl->memc_br2 = 0;
memctl->memc_br3 = 0;
} else if (ram_sz > dimm_bank) {
memctl->memc_or1 = ~(ram_sz - 1) | 0x400;
- memctl->memc_br1 = CFG_SDRAM_BASE | 0x81;
+ memctl->memc_br1 = CONFIG_SYS_SDRAM_BASE | 0x81;
memctl->memc_or2 = ~(dimm_bank - 1) | 0x400;
- memctl->memc_br2 = (CFG_SDRAM_BASE + ram_sz) | 0x81;
+ memctl->memc_br2 = (CONFIG_SYS_SDRAM_BASE + ram_sz) | 0x81;
memctl->memc_or3 = ~(dimm_bank - 1) | 0x400;
- memctl->memc_br3 = (CFG_SDRAM_BASE + ram_sz + dimm_bank) \
+ memctl->memc_br3 = (CONFIG_SYS_SDRAM_BASE + ram_sz + dimm_bank) \
| 0x81;
} else {
memctl->memc_or2 = ~(dimm_bank - 1) | 0x400;
- memctl->memc_br2 = CFG_SDRAM_BASE | 0x81;
+ memctl->memc_br2 = CONFIG_SYS_SDRAM_BASE | 0x81;
memctl->memc_or3 = ~(dimm_bank - 1) | 0x400;
- memctl->memc_br3 = (CFG_SDRAM_BASE + dimm_bank) | 0x81;
+ memctl->memc_br3 = (CONFIG_SYS_SDRAM_BASE + dimm_bank) | 0x81;
memctl->memc_or1 = ~(ram_sz - 1) | 0x400;
- memctl->memc_br1 = (CFG_SDRAM_BASE + dimm_sz) | 0x81;
+ memctl->memc_br1 = (CONFIG_SYS_SDRAM_BASE + dimm_sz) | 0x81;
}
}