| /** |
| * Low-level modular bignum functions |
| * |
| * This interface should only be used by the higher-level modular bignum |
| * module (bignum_mod.c) and the ECP module (ecp.c, ecp_curves.c). All other |
| * modules should use the high-level modular bignum interface (bignum_mod.h) |
| * or the legacy bignum interface (bignum.h). |
| * |
| * This is a low-level interface to operations on integers modulo which |
| * has no protection against passing invalid arguments such as arrays of |
| * the wrong size. The functions in bignum_mod.h provide a higher-level |
| * interface that includes protections against accidental misuse, at the |
| * expense of code size and sometimes more cumbersome memory management. |
| * |
| * The functions in this module obey the following conventions unless |
| * explicitly indicated otherwise: |
| * - **Modulus parameters**: the modulus is passed as a pointer to a structure |
| * of type #mbedtls_mpi_mod_modulus. The structure must be set up with an |
| * array of limbs storing the bignum value of the modulus. The modulus must |
| * be odd and is assumed to have no leading zeroes. The modulus is usually |
| * named \c N and is usually input-only. |
| * - **Bignum parameters**: Bignums are passed as pointers to an array of |
| * limbs. A limb has the type #mbedtls_mpi_uint. Unless otherwise specified: |
| * - Bignum parameters called \c A, \c B, ... are inputs, and are not |
| * modified by the function. |
| * - Bignum parameters called \c X, \c Y are outputs or input-output. |
| * The initial content of output-only parameters is ignored. |
| * - \c T is a temporary storage area. The initial content of such a |
| * parameter is ignored and the final content is unspecified. |
| * - **Bignum sizes**: bignum sizes are usually expressed by the \c limbs |
| * member of the modulus argument. All bignum parameters must have the same |
| * number of limbs as the modulus. All bignum sizes must be at least 1 and |
| * must be significantly less than #SIZE_MAX. The behavior if a size is 0 is |
| * undefined. |
| * - **Bignum representation**: the representation of inputs and outputs is |
| * specified by the \c int_rep field of the modulus for arithmetic |
| * functions. Utility functions may allow for different representation. |
| * - **Parameter ordering**: for bignum parameters, outputs come before inputs. |
| * The modulus is passed after other bignum input parameters. Temporaries |
| * come last. |
| * - **Aliasing**: in general, output bignums may be aliased to one or more |
| * inputs. Modulus values may not be aliased to any other parameter. Outputs |
| * may not be aliased to one another. Temporaries may not be aliased to any |
| * other parameter. |
| * - **Overlap**: apart from aliasing of limb array pointers (where two |
| * arguments are equal pointers), overlap is not supported and may result |
| * in undefined behavior. |
| * - **Error handling**: This is a low-level module. Functions generally do not |
| * try to protect against invalid arguments such as nonsensical sizes or |
| * null pointers. Note that passing bignums with a different size than the |
| * modulus may lead to buffer overflows. Some functions which allocate |
| * memory or handle reading/writing of bignums will return an error if |
| * memory allocation fails or if buffer sizes are invalid. |
| * - **Modular representatives**: all functions expect inputs to be in the |
| * range [0, \c N - 1] and guarantee outputs in the range [0, \c N - 1]. If |
| * an input is out of range, outputs are fully unspecified, though bignum |
| * values out of range should not cause buffer overflows (beware that this is |
| * not extensively tested). |
| */ |
| |
| /* |
| * Copyright The Mbed TLS Contributors |
| * SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later |
| */ |
| |
| #ifndef MBEDTLS_BIGNUM_MOD_RAW_H |
| #define MBEDTLS_BIGNUM_MOD_RAW_H |
| |
| #include "common.h" |
| |
| #if defined(MBEDTLS_BIGNUM_C) |
| #include "mbedtls/bignum.h" |
| #endif |
| |
| #include "bignum_mod.h" |
| |
| /** |
| * \brief Perform a safe conditional copy of an MPI which doesn't reveal |
| * whether the assignment was done or not. |
| * |
| * The size to copy is determined by \p N. |
| * |
| * \param[out] X The address of the destination MPI. |
| * This must be initialized. Must have enough limbs to |
| * store the full value of \p A. |
| * \param[in] A The address of the source MPI. This must be initialized. |
| * \param[in] N The address of the modulus related to \p X and \p A. |
| * \param assign The condition deciding whether to perform the |
| * assignment or not. Must be either 0 or 1: |
| * * \c 1: Perform the assignment `X = A`. |
| * * \c 0: Keep the original value of \p X. |
| * |
| * \note This function avoids leaking any information about whether |
| * the assignment was done or not. |
| * |
| * \warning If \p assign is neither 0 nor 1, the result of this function |
| * is indeterminate, and the resulting value in \p X might be |
| * neither its original value nor the value in \p A. |
| */ |
| void mbedtls_mpi_mod_raw_cond_assign(mbedtls_mpi_uint *X, |
| const mbedtls_mpi_uint *A, |
| const mbedtls_mpi_mod_modulus *N, |
| unsigned char assign); |
| |
| /** |
| * \brief Perform a safe conditional swap of two MPIs which doesn't reveal |
| * whether the swap was done or not. |
| * |
| * The size to swap is determined by \p N. |
| * |
| * \param[in,out] X The address of the first MPI. This must be initialized. |
| * \param[in,out] Y The address of the second MPI. This must be initialized. |
| * \param[in] N The address of the modulus related to \p X and \p Y. |
| * \param swap The condition deciding whether to perform |
| * the swap or not. Must be either 0 or 1: |
| * * \c 1: Swap the values of \p X and \p Y. |
| * * \c 0: Keep the original values of \p X and \p Y. |
| * |
| * \note This function avoids leaking any information about whether |
| * the swap was done or not. |
| * |
| * \warning If \p swap is neither 0 nor 1, the result of this function |
| * is indeterminate, and both \p X and \p Y might end up with |
| * values different to either of the original ones. |
| */ |
| void mbedtls_mpi_mod_raw_cond_swap(mbedtls_mpi_uint *X, |
| mbedtls_mpi_uint *Y, |
| const mbedtls_mpi_mod_modulus *N, |
| unsigned char swap); |
| |
| /** Import X from unsigned binary data. |
| * |
| * The MPI needs to have enough limbs to store the full value (including any |
| * most significant zero bytes in the input). |
| * |
| * \param[out] X The address of the MPI. The size is determined by \p N. |
| * (In particular, it must have at least as many limbs as |
| * the modulus \p N.) |
| * \param[in] N The address of the modulus related to \p X. |
| * \param[in] input The input buffer to import from. |
| * \param input_length The length in bytes of \p input. |
| * \param ext_rep The endianness of the number in the input buffer. |
| * |
| * \return \c 0 if successful. |
| * \return #MBEDTLS_ERR_MPI_BUFFER_TOO_SMALL if \p X isn't |
| * large enough to hold the value in \p input. |
| * \return #MBEDTLS_ERR_MPI_BAD_INPUT_DATA if the external representation |
| * of \p N is invalid or \p X is not less than \p N. |
| */ |
| int mbedtls_mpi_mod_raw_read(mbedtls_mpi_uint *X, |
| const mbedtls_mpi_mod_modulus *N, |
| const unsigned char *input, |
| size_t input_length, |
| mbedtls_mpi_mod_ext_rep ext_rep); |
| |
| /** Export A into unsigned binary data. |
| * |
| * \param[in] A The address of the MPI. The size is determined by \p N. |
| * (In particular, it must have at least as many limbs as |
| * the modulus \p N.) |
| * \param[in] N The address of the modulus related to \p A. |
| * \param[out] output The output buffer to export to. |
| * \param output_length The length in bytes of \p output. |
| * \param ext_rep The endianness in which the number should be written into the output buffer. |
| * |
| * \return \c 0 if successful. |
| * \return #MBEDTLS_ERR_MPI_BUFFER_TOO_SMALL if \p output isn't |
| * large enough to hold the value of \p A. |
| * \return #MBEDTLS_ERR_MPI_BAD_INPUT_DATA if the external representation |
| * of \p N is invalid. |
| */ |
| int mbedtls_mpi_mod_raw_write(const mbedtls_mpi_uint *A, |
| const mbedtls_mpi_mod_modulus *N, |
| unsigned char *output, |
| size_t output_length, |
| mbedtls_mpi_mod_ext_rep ext_rep); |
| |
| /** \brief Subtract two MPIs, returning the residue modulo the specified |
| * modulus. |
| * |
| * The size of the operation is determined by \p N. \p A and \p B must have |
| * the same number of limbs as \p N. |
| * |
| * \p X may be aliased to \p A or \p B, or even both, but may not overlap |
| * either otherwise. |
| * |
| * \param[out] X The address of the result MPI. |
| * This must be initialized. Must have enough limbs to |
| * store the full value of the result. |
| * \param[in] A The address of the first MPI. This must be initialized. |
| * \param[in] B The address of the second MPI. This must be initialized. |
| * \param[in] N The address of the modulus. Used to perform a modulo |
| * operation on the result of the subtraction. |
| */ |
| void mbedtls_mpi_mod_raw_sub(mbedtls_mpi_uint *X, |
| const mbedtls_mpi_uint *A, |
| const mbedtls_mpi_uint *B, |
| const mbedtls_mpi_mod_modulus *N); |
| |
| /** \brief Multiply two MPIs, returning the residue modulo the specified |
| * modulus. |
| * |
| * \note Currently handles the case when `N->int_rep` is |
| * MBEDTLS_MPI_MOD_REP_MONTGOMERY. |
| * |
| * The size of the operation is determined by \p N. \p A, \p B and \p X must |
| * all be associated with the modulus \p N and must all have the same number |
| * of limbs as \p N. |
| * |
| * \p X may be aliased to \p A or \p B, or even both, but may not overlap |
| * either otherwise. They may not alias \p N (since they must be in canonical |
| * form, they cannot == \p N). |
| * |
| * \param[out] X The address of the result MPI. Must have the same |
| * number of limbs as \p N. |
| * On successful completion, \p X contains the result of |
| * the multiplication `A * B * R^-1` mod N where |
| * `R = 2^(biL * N->limbs)`. |
| * \param[in] A The address of the first MPI. |
| * \param[in] B The address of the second MPI. |
| * \param[in] N The address of the modulus. Used to perform a modulo |
| * operation on the result of the multiplication. |
| * \param[in,out] T Temporary storage of size at least 2 * N->limbs + 1 |
| * limbs. Its initial content is unused and |
| * its final content is indeterminate. |
| * It must not alias or otherwise overlap any of the |
| * other parameters. |
| */ |
| void mbedtls_mpi_mod_raw_mul(mbedtls_mpi_uint *X, |
| const mbedtls_mpi_uint *A, |
| const mbedtls_mpi_uint *B, |
| const mbedtls_mpi_mod_modulus *N, |
| mbedtls_mpi_uint *T); |
| |
| /** |
| * \brief Returns the number of limbs of working memory required for |
| * a call to `mbedtls_mpi_mod_raw_inv_prime()`. |
| * |
| * \note This will always be at least |
| * `mbedtls_mpi_core_montmul_working_limbs(AN_limbs)`, |
| * i.e. sufficient for a call to `mbedtls_mpi_core_montmul()`. |
| * |
| * \param AN_limbs The number of limbs in the input `A` and the modulus `N` |
| * (they must be the same size) that will be given to |
| * `mbedtls_mpi_mod_raw_inv_prime()`. |
| * |
| * \return The number of limbs of working memory required by |
| * `mbedtls_mpi_mod_raw_inv_prime()`. |
| */ |
| size_t mbedtls_mpi_mod_raw_inv_prime_working_limbs(size_t AN_limbs); |
| |
| /** |
| * \brief Perform fixed-width modular inversion of a Montgomery-form MPI with |
| * respect to a modulus \p N that must be prime. |
| * |
| * \p X may be aliased to \p A, but not to \p N or \p RR. |
| * |
| * \param[out] X The modular inverse of \p A with respect to \p N. |
| * Will be in Montgomery form. |
| * \param[in] A The number to calculate the modular inverse of. |
| * Must be in Montgomery form. Must not be 0. |
| * \param[in] N The modulus, as a little-endian array of length \p AN_limbs. |
| * Must be prime. |
| * \param AN_limbs The number of limbs in \p A, \p N and \p RR. |
| * \param[in] RR The precomputed residue of 2^{2*biL} modulo N, as a little- |
| * endian array of length \p AN_limbs. |
| * \param[in,out] T Temporary storage of at least the number of limbs returned |
| * by `mbedtls_mpi_mod_raw_inv_prime_working_limbs()`. |
| * Its initial content is unused and its final content is |
| * indeterminate. |
| * It must not alias or otherwise overlap any of the other |
| * parameters. |
| * It is up to the caller to zeroize \p T when it is no |
| * longer needed, and before freeing it if it was dynamically |
| * allocated. |
| */ |
| void mbedtls_mpi_mod_raw_inv_prime(mbedtls_mpi_uint *X, |
| const mbedtls_mpi_uint *A, |
| const mbedtls_mpi_uint *N, |
| size_t AN_limbs, |
| const mbedtls_mpi_uint *RR, |
| mbedtls_mpi_uint *T); |
| |
| /** |
| * \brief Perform a known-size modular addition. |
| * |
| * Calculate `A + B modulo N`. |
| * |
| * The number of limbs in each operand, and the result, is given by the |
| * modulus \p N. |
| * |
| * \p X may be aliased to \p A or \p B, or even both, but may not overlap |
| * either otherwise. |
| * |
| * \param[out] X The result of the modular addition. |
| * \param[in] A Little-endian presentation of the left operand. This |
| * must be smaller than \p N. |
| * \param[in] B Little-endian presentation of the right operand. This |
| * must be smaller than \p N. |
| * \param[in] N The address of the modulus. |
| */ |
| void mbedtls_mpi_mod_raw_add(mbedtls_mpi_uint *X, |
| const mbedtls_mpi_uint *A, |
| const mbedtls_mpi_uint *B, |
| const mbedtls_mpi_mod_modulus *N); |
| |
| /** Convert an MPI from canonical representation (little-endian limb array) |
| * to the representation associated with the modulus. |
| * |
| * \param[in,out] X The limb array to convert. |
| * It must have as many limbs as \p N. |
| * It is converted in place. |
| * If this function returns an error, the content of \p X |
| * is unspecified. |
| * \param[in] N The modulus structure. |
| * |
| * \return \c 0 if successful. |
| * Otherwise an \c MBEDTLS_ERR_MPI_xxx error code. |
| */ |
| int mbedtls_mpi_mod_raw_canonical_to_modulus_rep( |
| mbedtls_mpi_uint *X, |
| const mbedtls_mpi_mod_modulus *N); |
| |
| /** Convert an MPI from the representation associated with the modulus |
| * to canonical representation (little-endian limb array). |
| * |
| * \param[in,out] X The limb array to convert. |
| * It must have as many limbs as \p N. |
| * It is converted in place. |
| * If this function returns an error, the content of \p X |
| * is unspecified. |
| * \param[in] N The modulus structure. |
| * |
| * \return \c 0 if successful. |
| * Otherwise an \c MBEDTLS_ERR_MPI_xxx error code. |
| */ |
| int mbedtls_mpi_mod_raw_modulus_to_canonical_rep( |
| mbedtls_mpi_uint *X, |
| const mbedtls_mpi_mod_modulus *N); |
| |
| /** Generate a random number uniformly in a range. |
| * |
| * This function generates a random number between \p min inclusive and |
| * \p N exclusive. |
| * |
| * The procedure complies with RFC 6979 ยง3.3 (deterministic ECDSA) |
| * when the RNG is a suitably parametrized instance of HMAC_DRBG |
| * and \p min is \c 1. |
| * |
| * \note There are `N - min` possible outputs. The lower bound |
| * \p min can be reached, but the upper bound \p N cannot. |
| * |
| * \param X The destination MPI, in canonical representation modulo \p N. |
| * It must not be aliased with \p N or otherwise overlap it. |
| * \param min The minimum value to return. It must be strictly smaller |
| * than \b N. |
| * \param N The modulus. |
| * This is the upper bound of the output range, exclusive. |
| * \param f_rng The RNG function to use. This must not be \c NULL. |
| * \param p_rng The RNG parameter to be passed to \p f_rng. |
| * |
| * \return \c 0 if successful. |
| * \return #MBEDTLS_ERR_MPI_NOT_ACCEPTABLE if the implementation was |
| * unable to find a suitable value within a limited number |
| * of attempts. This has a negligible probability if \p N |
| * is significantly larger than \p min, which is the case |
| * for all usual cryptographic applications. |
| */ |
| int mbedtls_mpi_mod_raw_random(mbedtls_mpi_uint *X, |
| mbedtls_mpi_uint min, |
| const mbedtls_mpi_mod_modulus *N, |
| int (*f_rng)(void *, unsigned char *, size_t), |
| void *p_rng); |
| |
| /** Convert an MPI into Montgomery form. |
| * |
| * \param X The address of the MPI. |
| * Must have the same number of limbs as \p N. |
| * \param N The address of the modulus, which gives the size of |
| * the base `R` = 2^(biL*N->limbs). |
| * |
| * \return \c 0 if successful. |
| */ |
| int mbedtls_mpi_mod_raw_to_mont_rep(mbedtls_mpi_uint *X, |
| const mbedtls_mpi_mod_modulus *N); |
| |
| /** Convert an MPI back from Montgomery representation. |
| * |
| * \param X The address of the MPI. |
| * Must have the same number of limbs as \p N. |
| * \param N The address of the modulus, which gives the size of |
| * the base `R`= 2^(biL*N->limbs). |
| * |
| * \return \c 0 if successful. |
| */ |
| int mbedtls_mpi_mod_raw_from_mont_rep(mbedtls_mpi_uint *X, |
| const mbedtls_mpi_mod_modulus *N); |
| |
| /** \brief Perform fixed width modular negation. |
| * |
| * The size of the operation is determined by \p N. \p A must have |
| * the same number of limbs as \p N. |
| * |
| * \p X may be aliased to \p A. |
| * |
| * \param[out] X The result of the modular negation. |
| * This must be initialized. |
| * \param[in] A Little-endian presentation of the input operand. This |
| * must be less than or equal to \p N. |
| * \param[in] N The modulus to use. |
| */ |
| void mbedtls_mpi_mod_raw_neg(mbedtls_mpi_uint *X, |
| const mbedtls_mpi_uint *A, |
| const mbedtls_mpi_mod_modulus *N); |
| |
| #endif /* MBEDTLS_BIGNUM_MOD_RAW_H */ |